% % (c) The University of Glasgow 2006 % \begin{code}
{-# OPTIONS -fno-warn-tabs #-}
-- The above warning supression flag is a temporary kludge.
-- While working on this module you are encouraged to remove it and
-- detab the module (please do the detabbing in a separate patch). See
--     http://ghc.haskell.org/trac/ghc/wiki/Commentary/CodingStyle#TabsvsSpaces
-- for details

module Unify ( 
	-- Matching of types: 
	--	the "tc" prefix indicates that matching always
	--	respects newtypes (rather than looking through them)
	tcMatchTy, tcMatchTys, tcMatchTyX, 
	ruleMatchTyX, tcMatchPreds, 

	MatchEnv(..), matchList, 

	typesCantMatch,

        -- Side-effect free unification
        tcUnifyTys, BindFlag(..),
        niFixTvSubst, niSubstTvSet,

        UnifyResultM(..), UnifyResult, tcUnifyTysFG

   ) where

#include "HsVersions.h"

import Var
import VarEnv
import VarSet
import Kind
import Type
import TyCon
import TypeRep
import Util

import Control.Monad (liftM, ap)
import Control.Applicative (Applicative(..))
\end{code} %************************************************************************ %* * Matching %* * %************************************************************************ Matching is much tricker than you might think. 1. The substitution we generate binds the *template type variables* which are given to us explicitly. 2. We want to match in the presence of foralls; e.g (forall a. t1) ~ (forall b. t2) That is what the RnEnv2 is for; it does the alpha-renaming that makes it as if a and b were the same variable. Initialising the RnEnv2, so that it can generate a fresh binder when necessary, entails knowing the free variables of both types. 3. We must be careful not to bind a template type variable to a locally bound variable. E.g. (forall a. x) ~ (forall b. b) where x is the template type variable. Then we do not want to bind x to a/b! This is a kind of occurs check. The necessary locals accumulate in the RnEnv2. \begin{code}
data MatchEnv
  = ME	{ me_tmpls :: VarSet	-- Template variables
 	, me_env   :: RnEnv2	-- Renaming envt for nested foralls
	}			--   In-scope set includes template variables
    -- Nota Bene: MatchEnv isn't specific to Types.  It is used
    --            for matching terms and coercions as well as types

tcMatchTy :: TyVarSet		-- Template tyvars
	  -> Type		-- Template
	  -> Type		-- Target
	  -> Maybe TvSubst	-- One-shot; in principle the template
				-- variables could be free in the target

tcMatchTy tmpls ty1 ty2
  = case match menv emptyTvSubstEnv ty1 ty2 of
	Just subst_env -> Just (TvSubst in_scope subst_env)
	Nothing	       -> Nothing
  where
    menv     = ME { me_tmpls = tmpls, me_env = mkRnEnv2 in_scope }
    in_scope = mkInScopeSet (tmpls `unionVarSet` tyVarsOfType ty2)
	-- We're assuming that all the interesting 
	-- tyvars in tys1 are in tmpls

tcMatchTys :: TyVarSet		-- Template tyvars
	   -> [Type]		-- Template
	   -> [Type]		-- Target
	   -> Maybe TvSubst	-- One-shot; in principle the template
				-- variables could be free in the target

tcMatchTys tmpls tys1 tys2
  = case match_tys menv emptyTvSubstEnv tys1 tys2 of
	Just subst_env -> Just (TvSubst in_scope subst_env)
	Nothing	       -> Nothing
  where
    menv     = ME { me_tmpls = tmpls, me_env = mkRnEnv2 in_scope }
    in_scope = mkInScopeSet (tmpls `unionVarSet` tyVarsOfTypes tys2)
	-- We're assuming that all the interesting 
	-- tyvars in tys1 are in tmpls

-- This is similar, but extends a substitution
tcMatchTyX :: TyVarSet 		-- Template tyvars
	   -> TvSubst		-- Substitution to extend
	   -> Type		-- Template
	   -> Type		-- Target
	   -> Maybe TvSubst
tcMatchTyX tmpls (TvSubst in_scope subst_env) ty1 ty2
  = case match menv subst_env ty1 ty2 of
	Just subst_env -> Just (TvSubst in_scope subst_env)
	Nothing	       -> Nothing
  where
    menv = ME {me_tmpls = tmpls, me_env = mkRnEnv2 in_scope}

tcMatchPreds
	:: [TyVar]			-- Bind these
	-> [PredType] -> [PredType]
   	-> Maybe TvSubstEnv
tcMatchPreds tmpls ps1 ps2
  = matchList (match menv) emptyTvSubstEnv ps1 ps2
  where
    menv = ME { me_tmpls = mkVarSet tmpls, me_env = mkRnEnv2 in_scope_tyvars }
    in_scope_tyvars = mkInScopeSet (tyVarsOfTypes ps1 `unionVarSet` tyVarsOfTypes ps2)

-- This one is called from the expression matcher, which already has a MatchEnv in hand
ruleMatchTyX :: MatchEnv 
	 -> TvSubstEnv		-- Substitution to extend
	 -> Type		-- Template
	 -> Type		-- Target
	 -> Maybe TvSubstEnv

ruleMatchTyX menv subst ty1 ty2 = match menv subst ty1 ty2	-- Rename for export
\end{code} Now the internals of matching \begin{code}
match :: MatchEnv	-- For the most part this is pushed downwards
      -> TvSubstEnv 	-- Substitution so far:
			--   Domain is subset of template tyvars
			--   Free vars of range is subset of 
			--	in-scope set of the RnEnv2
      -> Type -> Type	-- Template and target respectively
      -> Maybe TvSubstEnv

match menv subst ty1 ty2 | Just ty1' <- coreView ty1 = match menv subst ty1' ty2
			 | Just ty2' <- coreView ty2 = match menv subst ty1 ty2'

match menv subst (TyVarTy tv1) ty2
  | Just ty1' <- lookupVarEnv subst tv1'	-- tv1' is already bound
  = if eqTypeX (nukeRnEnvL rn_env) ty1' ty2
	-- ty1 has no locally-bound variables, hence nukeRnEnvL
    then Just subst
    else Nothing	-- ty2 doesn't match

  | tv1' `elemVarSet` me_tmpls menv
  = if any (inRnEnvR rn_env) (varSetElems (tyVarsOfType ty2))
    then Nothing	-- Occurs check
    else do { subst1 <- match_kind menv subst (tyVarKind tv1) (typeKind ty2)
			-- Note [Matching kinds]
	    ; return (extendVarEnv subst1 tv1' ty2) }

   | otherwise	-- tv1 is not a template tyvar
   = case ty2 of
	TyVarTy tv2 | tv1' == rnOccR rn_env tv2 -> Just subst
	_                                       -> Nothing
  where
    rn_env = me_env menv
    tv1' = rnOccL rn_env tv1

match menv subst (ForAllTy tv1 ty1) (ForAllTy tv2 ty2) 
  = do { subst' <- match_kind menv subst (tyVarKind tv1) (tyVarKind tv2)
       ; match menv' subst' ty1 ty2 }
  where		-- Use the magic of rnBndr2 to go under the binders
    menv' = menv { me_env = rnBndr2 (me_env menv) tv1 tv2 }

match menv subst (TyConApp tc1 tys1) (TyConApp tc2 tys2) 
  | tc1 == tc2 = match_tys menv subst tys1 tys2
match menv subst (FunTy ty1a ty1b) (FunTy ty2a ty2b) 
  = do { subst' <- match menv subst ty1a ty2a
       ; match menv subst' ty1b ty2b }
match menv subst (AppTy ty1a ty1b) ty2
  | Just (ty2a, ty2b) <- repSplitAppTy_maybe ty2
	-- 'repSplit' used because the tcView stuff is done above
  = do { subst' <- match menv subst ty1a ty2a
       ; match menv subst' ty1b ty2b }

match _ subst (LitTy x) (LitTy y) | x == y  = return subst

match _ _ _ _
  = Nothing

--------------
match_kind :: MatchEnv -> TvSubstEnv -> Kind -> Kind -> Maybe TvSubstEnv
-- Match the kind of the template tyvar with the kind of Type
-- Note [Matching kinds]
match_kind menv subst k1 k2
  | k2 `isSubKind` k1
  = return subst

  | otherwise
  = match menv subst k1 k2

-- Note [Matching kinds]
-- ~~~~~~~~~~~~~~~~~~~~~
-- For ordinary type variables, we don't want (m a) to match (n b) 
-- if say (a::*) and (b::*->*).  This is just a yes/no issue. 
--
-- For coercion kinds matters are more complicated.  If we have a 
-- coercion template variable co::a~[b], where a,b are presumably also
-- template type variables, then we must match co's kind against the 
-- kind of the actual argument, so as to give bindings to a,b.  
--
-- In fact I have no example in mind that *requires* this kind-matching
-- to instantiate template type variables, but it seems like the right
-- thing to do.  C.f. Note [Matching variable types] in Rules.lhs

--------------
match_tys :: MatchEnv -> TvSubstEnv -> [Type] -> [Type] -> Maybe TvSubstEnv
match_tys menv subst tys1 tys2 = matchList (match menv) subst tys1 tys2

--------------
matchList :: (env -> a -> b -> Maybe env)
	   -> env -> [a] -> [b] -> Maybe env
matchList _  subst []     []     = Just subst
matchList fn subst (a:as) (b:bs) = do { subst' <- fn subst a b
				      ; matchList fn subst' as bs }
matchList _  _     _      _      = Nothing
\end{code} %************************************************************************ %* * GADTs %* * %************************************************************************ Note [Pruning dead case alternatives] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Consider data T a where T1 :: T Int T2 :: T a newtype X = MkX Int newtype Y = MkY Char type family F a type instance F Bool = Int Now consider case x of { T1 -> e1; T2 -> e2 } The question before the house is this: if I know something about the type of x, can I prune away the T1 alternative? Suppose x::T Char. It's impossible to construct a (T Char) using T1, Answer = YES we can prune the T1 branch (clearly) Suppose x::T (F a), where 'a' is in scope. Then 'a' might be instantiated to 'Bool', in which case x::T Int, so ANSWER = NO (clearly) Suppose x::T X. Then *in Haskell* it's impossible to construct a (non-bottom) value of type (T X) using T1. But *in FC* it's quite possible. The newtype gives a coercion CoX :: X ~ Int So (T CoX) :: T X ~ T Int; hence (T1 `cast` sym (T CoX)) is a non-bottom value of type (T X) constructed with T1. Hence ANSWER = NO we can't prune the T1 branch (surprisingly) Furthermore, this can even happen; see Trac #1251. GHC's newtype-deriving mechanism uses a cast, just as above, to move from one dictionary to another, in effect giving the programmer access to CoX. Finally, suppose x::T Y. Then *even in FC* we can't construct a non-bottom value of type (T Y) using T1. That's because we can get from Y to Char, but not to Int. Here's a related question. data Eq a b where EQ :: Eq a a Consider case x of { EQ -> ... } Suppose x::Eq Int Char. Is the alternative dead? Clearly yes. What about x::Eq Int a, in a context where we have evidence that a~Char. Then again the alternative is dead. Summary We are really doing a test for unsatisfiability of the type constraints implied by the match. And that is clearly, in general, a hard thing to do. However, since we are simply dropping dead code, a conservative test suffices. There is a continuum of tests, ranging from easy to hard, that drop more and more dead code. For now we implement a very simple test: type variables match anything, type functions (incl newtypes) match anything, and only distinct data types fail to match. We can elaborate later. \begin{code}
typesCantMatch :: [(Type,Type)] -> Bool
typesCantMatch prs = any (\(s,t) -> cant_match s t) prs
  where
    cant_match :: Type -> Type -> Bool
    cant_match t1 t2
	| Just t1' <- coreView t1 = cant_match t1' t2
	| Just t2' <- coreView t2 = cant_match t1 t2'

    cant_match (FunTy a1 r1) (FunTy a2 r2)
	= cant_match a1 a2 || cant_match r1 r2

    cant_match (TyConApp tc1 tys1) (TyConApp tc2 tys2)
	| isDistinctTyCon tc1 && isDistinctTyCon tc2
	= tc1 /= tc2 || typesCantMatch (zipEqual "typesCantMatch" tys1 tys2)

    cant_match (FunTy {}) (TyConApp tc _) = isDistinctTyCon tc
    cant_match (TyConApp tc _) (FunTy {}) = isDistinctTyCon tc
	-- tc can't be FunTyCon by invariant

    cant_match (AppTy f1 a1) ty2
	| Just (f2, a2) <- repSplitAppTy_maybe ty2
	= cant_match f1 f2 || cant_match a1 a2
    cant_match ty1 (AppTy f2 a2)
	| Just (f1, a1) <- repSplitAppTy_maybe ty1
	= cant_match f1 f2 || cant_match a1 a2

    cant_match (LitTy x) (LitTy y) = x /= y

    cant_match _ _ = False      -- Safe!

-- Things we could add;
--	foralls
--	look through newtypes
--	take account of tyvar bindings (EQ example above)
\end{code} %************************************************************************ %* * Unification %* * %************************************************************************ Note [Fine-grained unification] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Do the types (x, x) and ([y], y) unify? The answer is seemingly "no" -- no substitution to finite types makes these match. But, a substitution to *infinite* types can unify these two types: [x |-> [[[...]]], y |-> [[[...]]] ]. Why do we care? Consider these two type family instances: type instance F x x = Int type instance F [y] y = Bool If we also have type instance Looper = [Looper] then the instances potentially overlap. The solution is to use unification over infinite terms. This is possible (see [1] for lots of gory details), but a full algorithm is a little more power than we need. Instead, we make a conservative approximation and just omit the occurs check. [1]: http://research.microsoft.com/en-us/um/people/simonpj/papers/ext-f/axioms-extended.pdf tcUnifyTys considers an occurs-check problem as the same as general unification failure. tcUnifyTysFG ("fine-grained") returns one of three results: success, occurs-check failure ("MaybeApart"), or general failure ("SurelyApart"). See also Trac #8162. It's worth noting that unification in the presence of infinite types is not complete. This means that, sometimes, a closed type family does not reduce when it should. See test case indexed-types/should_fail/Overlap15 for an example. Note [The substitution in MaybeApart] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The constructor MaybeApart carries data with it, typically a TvSubstEnv. Why? Because consider unifying these: (a, a, Int) ~ (b, [b], Bool) If we go left-to-right, we start with [a |-> b]. Then, on the middle terms, we apply the subst we have so far and discover that we need [b |-> [b]]. Because this fails the occurs check, we say that the types are MaybeApart (see above Note [Fine-grained unification]). But, we can't stop there! Because if we continue, we discover that Int is SurelyApart from Bool, and therefore the types are apart. This has practical consequences for the ability for closed type family applications to reduce. See test case indexed-types/should_compile/Overlap14. Note [Unifying with skolems] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If we discover that two types unify if and only if a skolem variable is substituted, we can't properly unify the types. But, that skolem variable may later be instantiated with a unifyable type. So, we return maybeApart in these cases. \begin{code}
tcUnifyTys :: (TyVar -> BindFlag)
	   -> [Type] -> [Type]
	   -> Maybe TvSubst	-- A regular one-shot (idempotent) substitution
-- The two types may have common type variables, and indeed do so in the
-- second call to tcUnifyTys in FunDeps.checkClsFD
--
tcUnifyTys bind_fn tys1 tys2
  | Unifiable subst <- tcUnifyTysFG bind_fn tys1 tys2
  = Just subst
  | otherwise
  = Nothing

-- This type does double-duty. It is used in the UM (unifier monad) and to
-- return the final result. See Note [Fine-grained unification]
type UnifyResult = UnifyResultM TvSubst
data UnifyResultM a = Unifiable a        -- the subst that unifies the types
                    | MaybeApart a       -- the subst has as much as we know
                                         -- it must be part of an most general unifier
                                         -- See Note [The substitution in MaybeApart]
                    | SurelyApart

-- See Note [Fine-grained unification]
tcUnifyTysFG :: (TyVar -> BindFlag)
             -> [Type] -> [Type]
             -> UnifyResult
tcUnifyTysFG bind_fn tys1 tys2
  = initUM bind_fn $
    do { subst <- unifyList emptyTvSubstEnv tys1 tys2

	-- Find the fixed point of the resulting non-idempotent substitution
        ; return (niFixTvSubst subst) }
\end{code} %************************************************************************ %* * Non-idempotent substitution %* * %************************************************************************ Note [Non-idempotent substitution] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ During unification we use a TvSubstEnv that is (a) non-idempotent (b) loop-free; ie repeatedly applying it yields a fixed point \begin{code}
niFixTvSubst :: TvSubstEnv -> TvSubst
-- Find the idempotent fixed point of the non-idempotent substitution
-- ToDo: use laziness instead of iteration?
niFixTvSubst env = f env
  where
    f e | not_fixpoint = f (mapVarEnv (substTy subst) e)
        | otherwise    = subst
        where
          range_tvs    = foldVarEnv (unionVarSet . tyVarsOfType) emptyVarSet e
          subst        = mkTvSubst (mkInScopeSet range_tvs) e 
          not_fixpoint = foldVarSet ((||) . in_domain) False range_tvs
          in_domain tv = tv `elemVarEnv` e

niSubstTvSet :: TvSubstEnv -> TyVarSet -> TyVarSet
-- Apply the non-idempotent substitution to a set of type variables,
-- remembering that the substitution isn't necessarily idempotent
-- This is used in the occurs check, before extending the substitution
niSubstTvSet subst tvs
  = foldVarSet (unionVarSet . get) emptyVarSet tvs
  where
    get tv = case lookupVarEnv subst tv of
	       Nothing -> unitVarSet tv
               Just ty -> niSubstTvSet subst (tyVarsOfType ty)
\end{code} %************************************************************************ %* * The workhorse %* * %************************************************************************ \begin{code}
unify :: TvSubstEnv	-- An existing substitution to extend
      -> Type -> Type 	-- Types to be unified, and witness of their equality
      -> UM TvSubstEnv		-- Just the extended substitution, 
				-- Nothing if unification failed
-- We do not require the incoming substitution to be idempotent,
-- nor guarantee that the outgoing one is.  That's fixed up by
-- the wrappers.

-- Respects newtypes, PredTypes

-- in unify, any NewTcApps/Preds should be taken at face value
unify subst (TyVarTy tv1) ty2  = uVar subst tv1 ty2
unify subst ty1 (TyVarTy tv2)  = uVar subst tv2 ty1

unify subst ty1 ty2 | Just ty1' <- tcView ty1 = unify subst ty1' ty2
unify subst ty1 ty2 | Just ty2' <- tcView ty2 = unify subst ty1 ty2'

unify subst (TyConApp tyc1 tys1) (TyConApp tyc2 tys2) 
  | tyc1 == tyc2                                   
  = unify_tys subst tys1 tys2

unify subst (FunTy ty1a ty1b) (FunTy ty2a ty2b) 
  = do	{ subst' <- unify subst ty1a ty2a
	; unify subst' ty1b ty2b }

	-- Applications need a bit of care!
	-- They can match FunTy and TyConApp, so use splitAppTy_maybe
	-- NB: we've already dealt with type variables and Notes,
	-- so if one type is an App the other one jolly well better be too
unify subst (AppTy ty1a ty1b) ty2
  | Just (ty2a, ty2b) <- repSplitAppTy_maybe ty2
  = do	{ subst' <- unify subst ty1a ty2a
        ; unify subst' ty1b ty2b }

unify subst ty1 (AppTy ty2a ty2b)
  | Just (ty1a, ty1b) <- repSplitAppTy_maybe ty1
  = do	{ subst' <- unify subst ty1a ty2a
        ; unify subst' ty1b ty2b }

unify subst (LitTy x) (LitTy y) | x == y = return subst

unify _ _ _ = surelyApart
	-- ForAlls??

------------------------------
unify_tys :: TvSubstEnv -> [Type] -> [Type] -> UM TvSubstEnv
unify_tys subst xs ys = unifyList subst xs ys

unifyList :: TvSubstEnv -> [Type] -> [Type] -> UM TvSubstEnv
unifyList subst orig_xs orig_ys
  = go subst orig_xs orig_ys
  where
    go subst []     []     = return subst
    go subst (x:xs) (y:ys) = do { subst' <- unify subst x y
				; go subst' xs ys }
    go _ _ _ = surelyApart

---------------------------------
uVar :: TvSubstEnv	-- An existing substitution to extend
     -> TyVar           -- Type variable to be unified
     -> Type            -- with this type
     -> UM TvSubstEnv

uVar subst tv1 ty
 = -- Check to see whether tv1 is refined by the substitution
   case (lookupVarEnv subst tv1) of
     Just ty' -> unify subst ty' ty     -- Yes, call back into unify'
     Nothing  -> uUnrefined subst       -- No, continue
			    tv1 ty ty

uUnrefined :: TvSubstEnv          -- An existing substitution to extend
           -> TyVar               -- Type variable to be unified
           -> Type                -- with this type
           -> Type                -- (version w/ expanded synonyms)
           -> UM TvSubstEnv

-- We know that tv1 isn't refined

uUnrefined subst tv1 ty2 ty2'
  | Just ty2'' <- tcView ty2'
  = uUnrefined subst tv1 ty2 ty2''	-- Unwrap synonyms
		-- This is essential, in case we have
		--	type Foo a = a
		-- and then unify a ~ Foo a

uUnrefined subst tv1 ty2 (TyVarTy tv2)
  | tv1 == tv2		-- Same type variable
  = return subst

    -- Check to see whether tv2 is refined
  | Just ty' <- lookupVarEnv subst tv2
  = uUnrefined subst tv1 ty' ty'

  | otherwise

  = do {   -- So both are unrefined; unify the kinds
       ; subst' <- unify subst (tyVarKind tv1) (tyVarKind tv2)

           -- And then bind one or the other, 
           -- depending on which is bindable
	   -- NB: unlike TcUnify we do not have an elaborate sub-kinding 
	   --     story.  That is relevant only during type inference, and
           --     (I very much hope) is not relevant here.
       ; b1 <- tvBindFlag tv1
       ; b2 <- tvBindFlag tv2
       ; let ty1 = TyVarTy tv1
       ; case (b1, b2) of
           (Skolem, Skolem) -> maybeApart subst' -- See Note [Unification with skolems]
           (BindMe, _)      -> return (extendVarEnv subst' tv1 ty2)
           (_, BindMe)      -> return (extendVarEnv subst' tv2 ty1) }

uUnrefined subst tv1 ty2 ty2'	-- ty2 is not a type variable
  | tv1 `elemVarSet` niSubstTvSet subst (tyVarsOfType ty2')
  = maybeApart subst                    -- Occurs check
                                        -- See Note [Fine-grained unification]
  | otherwise
  = do { subst' <- unify subst k1 k2
       ; bindTv subst' tv1 ty2 }	-- Bind tyvar to the synonym if poss
  where
    k1 = tyVarKind tv1
    k2 = typeKind ty2'

bindTv :: TvSubstEnv -> TyVar -> Type -> UM TvSubstEnv
bindTv subst tv ty	-- ty is not a type variable
  = do  { b <- tvBindFlag tv
	; case b of
	    Skolem -> maybeApart subst -- See Note [Unification with skolems]
	    BindMe -> return $ extendVarEnv subst tv ty
	}
\end{code} %************************************************************************ %* * Binding decisions %* * %************************************************************************ \begin{code}
data BindFlag 
  = BindMe	-- A regular type variable

  | Skolem	-- This type variable is a skolem constant
		-- Don't bind it; it only matches itself
\end{code} %************************************************************************ %* * Unification monad %* * %************************************************************************ \begin{code}
newtype UM a = UM { unUM :: (TyVar -> BindFlag)
		         -> UnifyResultM a }

instance Functor UM where
      fmap = liftM

instance Applicative UM where
      pure = return
      (<*>) = ap

instance Monad UM where
  return a = UM (\_tvs -> Unifiable a)
  fail _   = UM (\_tvs -> SurelyApart) -- failed pattern match
  m >>= k  = UM (\tvs -> case unUM m tvs of
			   Unifiable v -> unUM (k v) tvs
                           MaybeApart v ->
                             case unUM (k v) tvs of
                               Unifiable v' -> MaybeApart v'
                               other        -> other
                           SurelyApart -> SurelyApart)

initUM :: (TyVar -> BindFlag) -> UM TvSubst -> UnifyResult
initUM badtvs um = unUM um badtvs
    
tvBindFlag :: TyVar -> UM BindFlag
tvBindFlag tv = UM (\tv_fn -> Unifiable (tv_fn tv))

maybeApart :: TvSubstEnv -> UM TvSubstEnv
maybeApart subst = UM (\_tv_fn -> MaybeApart subst)

surelyApart :: UM a
surelyApart = UM (\_tv_fn -> SurelyApart)
\end{code}