%
% (c) The GRASP/AQUA Project, Glasgow University, 1992-1998
%
\section[PrimOp]{Primitive operations (machine-level)}
\begin{code}
module PrimOp (
PrimOp(..), PrimOpVecCat(..), allThePrimOps,
primOpType, primOpSig,
primOpTag, maxPrimOpTag, primOpOcc,
tagToEnumKey,
primOpOutOfLine, primOpCodeSize,
primOpOkForSpeculation, primOpOkForSideEffects,
primOpIsCheap, primOpFixity,
getPrimOpResultInfo, PrimOpResultInfo(..),
PrimCall(..)
) where
#include "HsVersions.h"
import TysPrim
import TysWiredIn
import CmmType
import Demand
import Var ( TyVar )
import OccName ( OccName, pprOccName, mkVarOccFS )
import TyCon ( TyCon, isPrimTyCon, tyConPrimRep, PrimRep(..) )
import Type ( Type, mkForAllTys, mkFunTy, mkFunTys, tyConAppTyCon,
typePrimRep )
import BasicTypes ( Arity, Fixity(..), FixityDirection(..), TupleSort(..) )
import ForeignCall ( CLabelString )
import Unique ( Unique, mkPrimOpIdUnique )
import Outputable
import FastTypes
import FastString
import Module ( PackageId )
\end{code}
%************************************************************************
%* *
\subsection[PrimOp-datatype]{Datatype for @PrimOp@ (an enumeration)}
%* *
%************************************************************************
These are in \tr{state-interface.verb} order.
\begin{code}
#include "primop-data-decl.hs-incl"
\end{code}
Used for the Ord instance
\begin{code}
primOpTag :: PrimOp -> Int
primOpTag op = iBox (tagOf_PrimOp op)
#include "primop-tag.hs-incl"
tagOf_PrimOp _ = error "tagOf_PrimOp: unknown primop"
instance Eq PrimOp where
op1 == op2 = tagOf_PrimOp op1 ==# tagOf_PrimOp op2
instance Ord PrimOp where
op1 < op2 = tagOf_PrimOp op1 <# tagOf_PrimOp op2
op1 <= op2 = tagOf_PrimOp op1 <=# tagOf_PrimOp op2
op1 >= op2 = tagOf_PrimOp op1 >=# tagOf_PrimOp op2
op1 > op2 = tagOf_PrimOp op1 ># tagOf_PrimOp op2
op1 `compare` op2 | op1 < op2 = LT
| op1 == op2 = EQ
| otherwise = GT
instance Outputable PrimOp where
ppr op = pprPrimOp op
\end{code}
\begin{code}
data PrimOpVecCat = IntVec
| WordVec
| FloatVec
\end{code}
An @Enum@-derived list would be better; meanwhile... (ToDo)
\begin{code}
allThePrimOps :: [PrimOp]
allThePrimOps =
#include "primop-list.hs-incl"
\end{code}
\begin{code}
tagToEnumKey :: Unique
tagToEnumKey = mkPrimOpIdUnique (primOpTag TagToEnumOp)
\end{code}
%************************************************************************
%* *
\subsection[PrimOp-info]{The essential info about each @PrimOp@}
%* *
%************************************************************************
The @String@ in the @PrimOpInfos@ is the ``base name'' by which the user may
refer to the primitive operation. The conventional \tr{#}-for-
unboxed ops is added on later.
The reason for the funny characters in the names is so we do not
interfere with the programmer's Haskell name spaces.
We use @PrimKinds@ for the ``type'' information, because they're
(slightly) more convenient to use than @TyCons@.
\begin{code}
data PrimOpInfo
= Dyadic OccName
Type
| Monadic OccName
Type
| Compare OccName
Type
| GenPrimOp OccName
[TyVar]
[Type]
Type
mkDyadic, mkMonadic, mkCompare :: FastString -> Type -> PrimOpInfo
mkDyadic str ty = Dyadic (mkVarOccFS str) ty
mkMonadic str ty = Monadic (mkVarOccFS str) ty
mkCompare str ty = Compare (mkVarOccFS str) ty
mkGenPrimOp :: FastString -> [TyVar] -> [Type] -> Type -> PrimOpInfo
mkGenPrimOp str tvs tys ty = GenPrimOp (mkVarOccFS str) tvs tys ty
\end{code}
%************************************************************************
%* *
\subsubsection{Strictness}
%* *
%************************************************************************
Not all primops are strict!
\begin{code}
primOpStrictness :: PrimOp -> Arity -> StrictSig
#include "primop-strictness.hs-incl"
\end{code}
%************************************************************************
%* *
\subsubsection{Fixity}
%* *
%************************************************************************
\begin{code}
primOpFixity :: PrimOp -> Maybe Fixity
#include "primop-fixity.hs-incl"
\end{code}
%************************************************************************
%* *
\subsubsection[PrimOp-comparison]{PrimOpInfo basic comparison ops}
%* *
%************************************************************************
@primOpInfo@ gives all essential information (from which everything
else, notably a type, can be constructed) for each @PrimOp@.
\begin{code}
primOpInfo :: PrimOp -> PrimOpInfo
#include "primop-primop-info.hs-incl"
primOpInfo _ = error "primOpInfo: unknown primop"
\end{code}
Here are a load of comments from the old primOp info:
A @Word#@ is an unsigned @Int#@.
@decodeFloat#@ is given w/ Integer-stuff (it's similar).
@decodeDouble#@ is given w/ Integer-stuff (it's similar).
Decoding of floating-point numbers is sorta Integer-related. Encoding
is done with plain ccalls now (see PrelNumExtra.lhs).
A @Weak@ Pointer is created by the @mkWeak#@ primitive:
mkWeak# :: k -> v -> f -> State# RealWorld
-> (# State# RealWorld, Weak# v #)
In practice, you'll use the higher-level
data Weak v = Weak# v
mkWeak :: k -> v -> IO () -> IO (Weak v)
The following operation dereferences a weak pointer. The weak pointer
may have been finalized, so the operation returns a result code which
must be inspected before looking at the dereferenced value.
deRefWeak# :: Weak# v -> State# RealWorld ->
(# State# RealWorld, v, Int# #)
Only look at v if the Int# returned is /= 0 !!
The higher-level op is
deRefWeak :: Weak v -> IO (Maybe v)
Weak pointers can be finalized early by using the finalize# operation:
finalizeWeak# :: Weak# v -> State# RealWorld ->
(# State# RealWorld, Int#, IO () #)
The Int# returned is either
0 if the weak pointer has already been finalized, or it has no
finalizer (the third component is then invalid).
1 if the weak pointer is still alive, with the finalizer returned
as the third component.
A {\em stable name/pointer} is an index into a table of stable name
entries. Since the garbage collector is told about stable pointers,
it is safe to pass a stable pointer to external systems such as C
routines.
\begin{verbatim}
makeStablePtr# :: a -> State# RealWorld -> (# State# RealWorld, StablePtr# a #)
freeStablePtr :: StablePtr# a -> State# RealWorld -> State# RealWorld
deRefStablePtr# :: StablePtr# a -> State# RealWorld -> (# State# RealWorld, a #)
eqStablePtr# :: StablePtr# a -> StablePtr# a -> Int#
\end{verbatim}
It may seem a bit surprising that @makeStablePtr#@ is a @IO@
operation since it doesn't (directly) involve IO operations. The
reason is that if some optimisation pass decided to duplicate calls to
@makeStablePtr#@ and we only pass one of the stable pointers over, a
massive space leak can result. Putting it into the IO monad
prevents this. (Another reason for putting them in a monad is to
ensure correct sequencing wrt the side-effecting @freeStablePtr@
operation.)
An important property of stable pointers is that if you call
makeStablePtr# twice on the same object you get the same stable
pointer back.
Note that we can implement @freeStablePtr#@ using @_ccall_@ (and,
besides, it's not likely to be used from Haskell) so it's not a
primop.
Question: Why @RealWorld@ - won't any instance of @_ST@ do the job? [ADR]
Stable Names
~~~~~~~~~~~~
A stable name is like a stable pointer, but with three important differences:
(a) You can't deRef one to get back to the original object.
(b) You can convert one to an Int.
(c) You don't need to 'freeStableName'
The existence of a stable name doesn't guarantee to keep the object it
points to alive (unlike a stable pointer), hence (a).
Invariants:
(a) makeStableName always returns the same value for a given
object (same as stable pointers).
(b) if two stable names are equal, it implies that the objects
from which they were created were the same.
(c) stableNameToInt always returns the same Int for a given
stable name.
-- HWL: The first 4 Int# in all par... annotations denote:
-- name, granularity info, size of result, degree of parallelism
-- Same structure as _seq_ i.e. returns Int#
-- KSW: v, the second arg in parAt# and parAtForNow#, is used only to determine
-- `the processor containing the expression v'; it is not evaluated
These primops are pretty weird.
dataToTag# :: a -> Int (arg must be an evaluated data type)
tagToEnum# :: Int -> a (result type must be an enumerated type)
The constraints aren't currently checked by the front end, but the
code generator will fall over if they aren't satisfied.
%************************************************************************
%* *
Which PrimOps are out-of-line
%* *
%************************************************************************
Some PrimOps need to be called out-of-line because they either need to
perform a heap check or they block.
\begin{code}
primOpOutOfLine :: PrimOp -> Bool
#include "primop-out-of-line.hs-incl"
\end{code}
%************************************************************************
%* *
Failure and side effects
%* *
%************************************************************************
Note [PrimOp can_fail and has_side_effects]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Both can_fail and has_side_effects mean that the primop has
some effect that is not captured entirely by its result value.
---------- has_side_effects ---------------------
Has some imperative side effect, perhaps on the world (I/O),
or perhaps on some mutable data structure (writeIORef).
Generally speaking all such primops have a type like
State -> input -> (State, output)
so the state token guarantees ordering, and also ensures
that the primop is executed even if 'output' is discarded.
---------- can_fail ----------------------------
Can fail with a seg-fault or divide-by-zero error on some elements
of its input domain. Main examples:
division (fails on zero demoninator
array indexing (fails if the index is out of bounds)
However (ASSUMPTION), these can_fail primops are ALWAYS surrounded
with a test that checks for the bad cases.
Consequences:
* You can discard a can_fail primop, or float it _inwards_.
But you cannot float it _outwards_, lest you escape the
dynamic scope of the test. Example:
case d ># 0# of
True -> case x /# d of r -> r +# 1
False -> 0
Here we must not float the case outwards to give
case x/# d of r ->
case d ># 0# of
True -> r +# 1
False -> 0
* I believe that exactly the same rules apply to a has_side_effects
primop; you can discard it (remember, the state token will keep
it alive if necessary), or float it in, but not float it out.
Example of the latter
if blah then let! s1 = writeMutVar s0 v True in s1
else s0
Notice that s0 is mentioned in both branches of the 'if', but
only one of these two will actually be consumed. But if we
float out to
let! s1 = writeMutVar s0 v True
in if blah then s1 else s0
the writeMutVar will be performed in both branches, which is
utterly wrong.
* You cannot duplicate a has_side_effect primop. You might wonder
how this can occur given the state token threading, but just look
at Control.Monad.ST.Lazy.Imp.strictToLazy! We get something like
this
p = case readMutVar# s v of
(# s', r #) -> (S# s', r)
s' = case p of (s', r) -> s'
r = case p of (s', r) -> r
(All these bindings are boxed.) If we inline p at its two call
sites, we get a catastrophe: because the read is performed once when
s' is demanded, and once when 'r' is demanded, which may be much
later. Utterly wrong. Trac #3207 is real example of this happening.
However, it's fine to duplicate a can_fail primop. That is
the difference between can_fail and has_side_effects.
can_fail has_side_effects
Discard YES YES
Float in YES YES
Float out NO NO
Duplicate YES NO
How do we achieve these effects?
Note [primOpOkForSpeculation]
* The "no-float-out" thing is achieved by ensuring that we never
let-bind a can_fail or has_side_effects primop. The RHS of a
let-binding (which can float in and out freely) satisfies
exprOkForSpeculation. And exprOkForSpeculation is false of
can_fail and no_side_effect.
* So can_fail and no_side_effect primops will appear only as the
scrutinees of cases, and that's why the FloatIn pass is capable
of floating case bindings inwards.
* The no-duplicate thing is done via primOpIsCheap, by making
has_side_effects things (very very very) not-cheap!
\begin{code}
primOpHasSideEffects :: PrimOp -> Bool
#include "primop-has-side-effects.hs-incl"
primOpCanFail :: PrimOp -> Bool
#include "primop-can-fail.hs-incl"
primOpOkForSpeculation :: PrimOp -> Bool
primOpOkForSpeculation op
= not (primOpHasSideEffects op || primOpOutOfLine op || primOpCanFail op)
primOpOkForSideEffects :: PrimOp -> Bool
primOpOkForSideEffects op
= not (primOpHasSideEffects op)
\end{code}
Note [primOpIsCheap]
~~~~~~~~~~~~~~~~~~~~
@primOpIsCheap@, as used in \tr{SimplUtils.lhs}. For now (HACK
WARNING), we just borrow some other predicates for a
what-should-be-good-enough test. "Cheap" means willing to call it more
than once, and/or push it inside a lambda. The latter could change the
behaviour of 'seq' for primops that can fail, so we don't treat them as cheap.
\begin{code}
primOpIsCheap :: PrimOp -> Bool
primOpIsCheap op = primOpOkForSpeculation op
\end{code}
%************************************************************************
%* *
PrimOp code size
%* *
%************************************************************************
primOpCodeSize
~~~~~~~~~~~~~~
Gives an indication of the code size of a primop, for the purposes of
calculating unfolding sizes; see CoreUnfold.sizeExpr.
\begin{code}
primOpCodeSize :: PrimOp -> Int
#include "primop-code-size.hs-incl"
primOpCodeSizeDefault :: Int
primOpCodeSizeDefault = 1
primOpCodeSizeForeignCall :: Int
primOpCodeSizeForeignCall = 4
\end{code}
%************************************************************************
%* *
PrimOp types
%* *
%************************************************************************
\begin{code}
primOpType :: PrimOp -> Type
primOpType op
= case primOpInfo op of
Dyadic _occ ty -> dyadic_fun_ty ty
Monadic _occ ty -> monadic_fun_ty ty
Compare _occ ty -> compare_fun_ty ty
GenPrimOp _occ tyvars arg_tys res_ty ->
mkForAllTys tyvars (mkFunTys arg_tys res_ty)
primOpOcc :: PrimOp -> OccName
primOpOcc op = case primOpInfo op of
Dyadic occ _ -> occ
Monadic occ _ -> occ
Compare occ _ -> occ
GenPrimOp occ _ _ _ -> occ
primOpSig :: PrimOp -> ([TyVar], [Type], Type, Arity, StrictSig)
primOpSig op
= (tyvars, arg_tys, res_ty, arity, primOpStrictness op arity)
where
arity = length arg_tys
(tyvars, arg_tys, res_ty)
= case (primOpInfo op) of
Monadic _occ ty -> ([], [ty], ty )
Dyadic _occ ty -> ([], [ty,ty], ty )
Compare _occ ty -> ([], [ty,ty], intPrimTy)
GenPrimOp _occ tyvars arg_tys res_ty -> (tyvars, arg_tys, res_ty )
\end{code}
\begin{code}
data PrimOpResultInfo
= ReturnsPrim PrimRep
| ReturnsAlg TyCon
getPrimOpResultInfo :: PrimOp -> PrimOpResultInfo
getPrimOpResultInfo op
= case (primOpInfo op) of
Dyadic _ ty -> ReturnsPrim (typePrimRep ty)
Monadic _ ty -> ReturnsPrim (typePrimRep ty)
Compare _ _ -> ReturnsPrim (tyConPrimRep intPrimTyCon)
GenPrimOp _ _ _ ty | isPrimTyCon tc -> ReturnsPrim (tyConPrimRep tc)
| otherwise -> ReturnsAlg tc
where
tc = tyConAppTyCon ty
\end{code}
We do not currently make use of whether primops are commutable.
We used to try to move constants to the right hand side for strength
reduction.
\begin{code}
\end{code}
Utils:
\begin{code}
dyadic_fun_ty, monadic_fun_ty, compare_fun_ty :: Type -> Type
dyadic_fun_ty ty = mkFunTys [ty, ty] ty
monadic_fun_ty ty = mkFunTy ty ty
compare_fun_ty ty = mkFunTys [ty, ty] intPrimTy
\end{code}
Output stuff:
\begin{code}
pprPrimOp :: PrimOp -> SDoc
pprPrimOp other_op = pprOccName (primOpOcc other_op)
\end{code}
%************************************************************************
%* *
\subsubsection[PrimCall]{User-imported primitive calls}
%* *
%************************************************************************
\begin{code}
data PrimCall = PrimCall CLabelString PackageId
instance Outputable PrimCall where
ppr (PrimCall lbl pkgId)
= text "__primcall" <+> ppr pkgId <+> ppr lbl
\end{code}