To make an executable program, the GHC system compiles your code and then links it with a non-trivial runtime system (RTS), which handles storage management, profiling, etc.
You have some control over the behaviour of the RTS, by giving special command-line arguments to your program.
When your Haskell program starts up, its RTS extracts command-line arguments bracketed between +RTS and -RTS as its own. For example:
% ./a.out -f +RTS -p -S -RTS -h foo bar |
The RTS will snaffle -p -S for itself, and the remaining arguments -f -h foo bar will be handed to your program if/when it calls System.getArgs.
No -RTS option is required if the runtime-system options extend to the end of the command line, as in this example:
% hls -ltr /usr/etc +RTS -A5m |
If you absolutely positively want all the rest of the options in a command line to go to the program (and not the RTS), use a --RTS.
As always, for RTS options that take sizes: If the last character of size is a K or k, multiply by 1000; if an M or m, by 1,000,000; if a G or G, by 1,000,000,000. (And any wraparound in the counters is your fault!)
Giving a +RTS -f option will print out the RTS options actually available in your program (which vary, depending on how you compiled).
NOTE: since GHC is itself compiled by GHC, you can change RTS options in the compiler using the normal +RTS ... -RTS combination. eg. to increase the maximum heap size for a compilation to 128M, you would add +RTS -M128m -RTS to the command line.
There are several options to give you precise control over garbage collection. Hopefully, you won't need any of these in normal operation, but there are several things that can be tweaked for maximum performance.
[Default: 256k] Set the allocation area size used by the garbage collector. The allocation area (actually generation 0 step 0) is fixed and is never resized (unless you use -H, below).
Increasing the allocation area size may or may not give better performance (a bigger allocation area means worse cache behaviour but fewer garbage collections and less promotion).
With only 1 generation (-G1) the -A option specifies the minimum allocation area, since the actual size of the allocation area will be resized according to the amount of data in the heap (see -F, below).
[Default: 2] This option controls the amount of memory reserved for the older generations (and in the case of a two space collector the size of the allocation area) as a factor of the amount of live data. For example, if there was 2M of live data in the oldest generation when we last collected it, then by default we'll wait until it grows to 4M before collecting it again.
The default seems to work well here. If you have plenty of memory, it is usually better to use -Hsize than to increase -Ffactor.
The -F setting will be automatically reduced by the garbage collector when the maximum heap size (the -Msize setting) is approaching.
[Default: 2] Set the number of generations used by the garbage collector. The default of 2 seems to be good, but the garbage collector can support any number of generations. Anything larger than about 4 is probably not a good idea unless your program runs for a long time, because the oldest generation will hardly ever get collected.
Specifying 1 generation with +RTS -G1 gives you a simple 2-space collector, as you would expect. In a 2-space collector, the -A option (see above) specifies the minimum allocation area size, since the allocation area will grow with the amount of live data in the heap. In a multi-generational collector the allocation area is a fixed size (unless you use the -H option, see below).
[Default: 0] This option provides a “suggested heap size” for the garbage collector. The garbage collector will use about this much memory until the program residency grows and the heap size needs to be expanded to retain reasonable performance.
By default, the heap will start small, and grow and shrink as necessary. This can be bad for performance, so if you have plenty of memory it's worthwhile supplying a big -Hsize. For improving GC performance, using -Hsize is usually a better bet than -Asize.
[Default: 1k] Set the initial stack size for new threads. Thread stacks (including the main thread's stack) live on the heap, and grow as required. The default value is good for concurrent applications with lots of small threads; if your program doesn't fit this model then increasing this option may help performance.
The main thread is normally started with a slightly larger heap to cut down on unnecessary stack growth while the program is starting up.
[Default: 1M] Set the maximum stack size for an individual thread to size bytes. This option is there purely to stop the program eating up all the available memory in the machine if it gets into an infinite loop.
Minimum % n of heap which must be available for allocation. The default is 3%.
[Default: 64M] Set the maximum heap size to size bytes. The heap normally grows and shrinks according to the memory requirements of the program. The only reason for having this option is to stop the heap growing without bound and filling up all the available swap space, which at the least will result in the program being summarily killed by the operating system.
Write modest (-s) or verbose (-S) garbage-collector statistics into file file. The default file is program.stat. The file stderr is treated specially, with the output really being sent to stderr.
This option is useful for watching how the storage manager adjusts the heap size based on the current amount of live data.
Write a one-line GC stats summary after running the program. This output is in the same format as that produced by the -Rghc-timing option.
These RTS options might be used (a) to avoid a GHC bug, (b) to see “what's really happening”, or (c) because you feel like it. Not recommended for everyday use!
Sound the bell at the start of each (major) garbage collection.
Oddly enough, people really do use this option! Our pal in Durham (England), Paul Callaghan, writes: “Some people here use it for a variety of purposes—honestly!—e.g., confirmation that the code/machine is doing something, infinite loop detection, gauging cost of recently added code. Certain people can even tell what stage [the program] is in by the beep pattern. But the major use is for annoying others in the same office…”
Produce “ticky-ticky” statistics at the end of the program run. The file business works just like on the -S RTS option (above).
“Ticky-ticky” statistics are counts of various program actions (updates, enters, etc.) The program must have been compiled using -ticky (a.k.a. “ticky-ticky profiling”), and, for it to be really useful, linked with suitable system libraries. Not a trivial undertaking: consult the installation guide on how to set things up for easy “ticky-ticky” profiling. For more information, see Section 5.7.
An RTS debugging flag; varying quantities of output depending on which bits are set in num. Only works if the RTS was compiled with the DEBUG option.
Turn off “update-frame squeezing” at garbage-collection time. (There's no particularly good reason to turn it off, except to ensure the accuracy of certain data collected regarding thunk entry counts.)
GHC lets you exercise rudimentary control over the RTS settings for any given program, by compiling in a “hook” that is called by the run-time system. The RTS contains stub definitions for all these hooks, but by writing your own version and linking it on the GHC command line, you can override the defaults.
Owing to the vagaries of DLL linking, these hooks don't work under Windows when the program is built dynamically.
The function defaultsHook lets you change various RTS options. The commonest use for this is to give your program a default heap and/or stack size that is greater than the default. For example, to set -M128m -K1m:
#include "Rts.h"
#include "RtsFlags.h"
void defaultsHook (void) {
RtsFlags.GcFlags.maxStkSize = 1000002 / sizeof(W_);
RtsFlags.GcFlags.maxHeapSize = 128*1024*1024 / BLOCK_SIZE_W;
} |
Don't use powers of two for heap/stack sizes: these are more likely to interact badly with direct-mapped caches. The full set of flags is defined in ghc/rts/RtsFlags.h the the GHC source tree.
You can also change the messages printed when the runtime system “blows up,” e.g., on stack overflow. The hooks for these are as follows:
What's printed out before the message from error.
The heap-overflow message.
The stack-overflow message.
The message printed if malloc fails.
The message printed if a pattern-match fails (the failures that were not handled by the Haskell programmer).
What's printed out before a trace message.
What's printed out after a trace message.
For example, here is the “hooks” code used by GHC itself:
#include "Rts.h"
#include "../rts/RtsFlags.h"
#include "HsFFI.h"
void
defaultsHook (void)
{
RtsFlags.GcFlags.heapSizeSuggestion = 6*1024*1024 / BLOCK_SIZE;
RtsFlags.GcFlags.maxStkSize = 8*1024*1024 / sizeof(W_);
RtsFlags.GcFlags.giveStats = COLLECT_GC_STATS;
RtsFlags.GcFlags.statsFile = stderr;
}
void
ErrorHdrHook (long fd)
{
char msg[]="\n";
write(fd,msg,1);
}
void
PatErrorHdrHook (long fd)
{
const char msg[]="\n*** Pattern-matching error within GHC!\n\nThis is a compiler bug; please report it to glasgow-haskell-bugs@haskell.org.\n\nFail:";
write(fd,msg,sizeof(msg)-1);
}
void
PreTraceHook (long fd)
{
const char msg[]="\n";
write(fd,msg,sizeof(msg)-1);
}
void
PostTraceHook (long fd)
{
#if 0
const char msg[]="\n";
write(fd,msg,sizeof(msg)-1);
#endif
} |