{- (c) The University of Glasgow 2006 (c) The GRASP/AQUA Project, Glasgow University, 1992-1998 -} {-# LANGUAGE CPP #-} {-# LANGUAGE MultiWayIf #-} module GHC.Core.SimpleOpt ( SimpleOpts (..), defaultSimpleOpts, -- ** Simple expression optimiser simpleOptPgm, simpleOptExpr, simpleOptExprWith, -- ** Join points joinPointBinding_maybe, joinPointBindings_maybe, -- ** Predicates on expressions exprIsConApp_maybe, exprIsLiteral_maybe, exprIsLambda_maybe, ) where #include "HsVersions.h" import GHC.Prelude import GHC.Core import GHC.Core.Opt.Arity import GHC.Core.Subst import GHC.Core.Utils import GHC.Core.FVs import GHC.Core.Unfold import GHC.Core.Unfold.Make import GHC.Core.Make ( FloatBind(..) ) import GHC.Core.Opt.OccurAnal( occurAnalyseExpr, occurAnalysePgm ) import GHC.Types.Literal import GHC.Types.Id import GHC.Types.Id.Info ( unfoldingInfo, setUnfoldingInfo, setRuleInfo, IdInfo (..) ) import GHC.Types.Var ( isNonCoVarId ) import GHC.Types.Var.Set import GHC.Types.Var.Env import GHC.Core.DataCon import GHC.Types.Demand( etaConvertStrictSig ) import GHC.Types.Tickish import GHC.Core.Coercion.Opt ( optCoercion, OptCoercionOpts (..) ) import GHC.Core.Type hiding ( substTy, extendTvSubst, extendCvSubst, extendTvSubstList , isInScope, substTyVarBndr, cloneTyVarBndr ) import GHC.Core.Coercion hiding ( substCo, substCoVarBndr ) import GHC.Builtin.Types import GHC.Builtin.Names import GHC.Types.Basic import GHC.Unit.Module ( Module ) import GHC.Utils.Outputable import GHC.Utils.Panic import GHC.Utils.Misc import GHC.Data.Maybe ( orElse ) import GHC.Data.FastString import Data.List (mapAccumL) import qualified Data.ByteString as BS {- ************************************************************************ * * The Simple Optimiser * * ************************************************************************ Note [The simple optimiser] ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The simple optimiser is a lightweight, pure (non-monadic) function that rapidly does a lot of simple optimisations, including - inlining things that occur just once, or whose RHS turns out to be trivial - beta reduction - case of known constructor - dead code elimination It does NOT do any call-site inlining; it only inlines a function if it can do so unconditionally, dropping the binding. It thereby guarantees to leave no un-reduced beta-redexes. It is careful to follow the guidance of "Secrets of the GHC inliner", and in particular the pre-inline-unconditionally and post-inline-unconditionally story, to do effective beta reduction on functions called precisely once, without repeatedly optimising the same expression. In fact, the simple optimiser is a good example of this little dance in action; the full Simplifier is a lot more complicated. -} -- | Simple optimiser options data SimpleOpts = SimpleOpts { so_uf_opts :: !UnfoldingOpts -- ^ Unfolding options , so_co_opts :: !OptCoercionOpts -- ^ Coercion optimiser options } -- | Default options for the Simple optimiser. defaultSimpleOpts :: SimpleOpts defaultSimpleOpts = SimpleOpts { so_uf_opts = defaultUnfoldingOpts , so_co_opts = OptCoercionOpts { optCoercionEnabled = False } } simpleOptExpr :: HasDebugCallStack => SimpleOpts -> CoreExpr -> CoreExpr -- See Note [The simple optimiser] -- Do simple optimisation on an expression -- The optimisation is very straightforward: just -- inline non-recursive bindings that are used only once, -- or where the RHS is trivial -- -- We also inline bindings that bind a Eq# box: see -- See Note [Getting the map/coerce RULE to work]. -- -- Also we convert functions to join points where possible (as -- the occurrence analyser does most of the work anyway). -- -- The result is NOT guaranteed occurrence-analysed, because -- in (let x = y in ....) we substitute for x; so y's occ-info -- may change radically -- -- Note that simpleOptExpr is a pure function that we want to be able to call -- from lots of places, including ones that don't have DynFlags (e.g to optimise -- unfoldings of statically defined Ids via mkCompulsoryUnfolding). It used to -- fetch its options directly from the DynFlags, however, so some callers had to -- resort to using unsafeGlobalDynFlags (a global mutable variable containing -- the DynFlags). It has been modified to take its own SimpleOpts that may be -- created from DynFlags, but not necessarily. simpleOptExpr opts expr = -- pprTrace "simpleOptExpr" (ppr init_subst $$ ppr expr) simpleOptExprWith opts init_subst expr where init_subst = mkEmptySubst (mkInScopeSet (exprFreeVars expr)) -- It's potentially important to make a proper in-scope set -- Consider let x = ..y.. in \y. ...x... -- Then we should remember to clone y before substituting -- for x. It's very unlikely to occur, because we probably -- won't *be* substituting for x if it occurs inside a -- lambda. -- -- It's a bit painful to call exprFreeVars, because it makes -- three passes instead of two (occ-anal, and go) simpleOptExprWith :: HasDebugCallStack => SimpleOpts -> Subst -> InExpr -> OutExpr -- See Note [The simple optimiser] simpleOptExprWith opts subst expr = simple_opt_expr init_env (occurAnalyseExpr expr) where init_env = (emptyEnv opts) { soe_subst = subst } ---------------------- simpleOptPgm :: SimpleOpts -> Module -> CoreProgram -> [CoreRule] -> (CoreProgram, [CoreRule], CoreProgram) -- See Note [The simple optimiser] simpleOptPgm opts this_mod binds rules = (reverse binds', rules', occ_anald_binds) where occ_anald_binds = occurAnalysePgm this_mod (\_ -> True) {- All unfoldings active -} (\_ -> False) {- No rules active -} rules binds (final_env, binds') = foldl' do_one (emptyEnv opts, []) occ_anald_binds final_subst = soe_subst final_env rules' = substRulesForImportedIds final_subst rules -- We never unconditionally inline into rules, -- hence paying just a substitution do_one (env, binds') bind = case simple_opt_bind env bind TopLevel of (env', Nothing) -> (env', binds') (env', Just bind') -> (env', bind':binds') -- In these functions the substitution maps InVar -> OutExpr ---------------------- type SimpleClo = (SimpleOptEnv, InExpr) data SimpleOptEnv = SOE { soe_co_opt_opts :: !OptCoercionOpts -- ^ Options for the coercion optimiser , soe_uf_opts :: !UnfoldingOpts -- ^ Unfolding options , soe_inl :: IdEnv SimpleClo -- ^ Deals with preInlineUnconditionally; things -- that occur exactly once and are inlined -- without having first been simplified , soe_subst :: Subst -- ^ Deals with cloning; includes the InScopeSet } instance Outputable SimpleOptEnv where ppr (SOE { soe_inl = inl, soe_subst = subst }) = text "SOE {" <+> vcat [ text "soe_inl =" <+> ppr inl , text "soe_subst =" <+> ppr subst ] <+> text "}" emptyEnv :: SimpleOpts -> SimpleOptEnv emptyEnv opts = SOE { soe_inl = emptyVarEnv , soe_subst = emptySubst , soe_co_opt_opts = so_co_opts opts , soe_uf_opts = so_uf_opts opts } soeZapSubst :: SimpleOptEnv -> SimpleOptEnv soeZapSubst env@(SOE { soe_subst = subst }) = env { soe_inl = emptyVarEnv, soe_subst = zapSubstEnv subst } soeSetInScope :: SimpleOptEnv -> SimpleOptEnv -> SimpleOptEnv -- Take in-scope set from env1, and the rest from env2 soeSetInScope (SOE { soe_subst = subst1 }) env2@(SOE { soe_subst = subst2 }) = env2 { soe_subst = setInScope subst2 (substInScope subst1) } --------------- simple_opt_clo :: SimpleOptEnv -> SimpleClo -> OutExpr simple_opt_clo env (e_env, e) = simple_opt_expr (soeSetInScope env e_env) e simple_opt_expr :: HasCallStack => SimpleOptEnv -> InExpr -> OutExpr simple_opt_expr env expr = go expr where subst = soe_subst env in_scope = substInScope subst in_scope_env = (in_scope, simpleUnfoldingFun) --------------- go (Var v) | Just clo <- lookupVarEnv (soe_inl env) v = simple_opt_clo env clo | otherwise = lookupIdSubst (soe_subst env) v go (App e1 e2) = simple_app env e1 [(env,e2)] go (Type ty) = Type (substTy subst ty) go (Coercion co) = Coercion (go_co co) go (Lit lit) = Lit lit go (Tick tickish e) = mkTick (substTickish subst tickish) (go e) go (Cast e co) = mk_cast (go e) (go_co co) go (Let bind body) = case simple_opt_bind env bind NotTopLevel of (env', Nothing) -> simple_opt_expr env' body (env', Just bind) -> Let bind (simple_opt_expr env' body) go lam@(Lam {}) = go_lam env [] lam go (Case e b ty as) -- See Note [Getting the map/coerce RULE to work] | isDeadBinder b , Just (_, [], con, _tys, es) <- exprIsConApp_maybe in_scope_env e' -- We don't need to be concerned about floats when looking for coerce. , Just (Alt altcon bs rhs) <- findAlt (DataAlt con) as = case altcon of DEFAULT -> go rhs _ -> foldr wrapLet (simple_opt_expr env' rhs) mb_prs where (env', mb_prs) = mapAccumL (simple_out_bind NotTopLevel) env $ zipEqual "simpleOptExpr" bs es -- Note [Getting the map/coerce RULE to work] | isDeadBinder b , [Alt DEFAULT _ rhs] <- as , isCoVarType (varType b) , (Var fun, _args) <- collectArgs e , fun `hasKey` coercibleSCSelIdKey -- without this last check, we get #11230 = go rhs | otherwise = Case e' b' (substTy subst ty) (map (go_alt env') as) where e' = go e (env', b') = subst_opt_bndr env b ---------------------- go_co co = optCoercion (soe_co_opt_opts env) (getTCvSubst subst) co ---------------------- go_alt env (Alt con bndrs rhs) = Alt con bndrs' (simple_opt_expr env' rhs) where (env', bndrs') = subst_opt_bndrs env bndrs ---------------------- -- go_lam tries eta reduction go_lam env bs' (Lam b e) = go_lam env' (b':bs') e where (env', b') = subst_opt_bndr env b go_lam env bs' e | Just etad_e <- tryEtaReduce bs e' = etad_e | otherwise = mkLams bs e' where bs = reverse bs' e' = simple_opt_expr env e mk_cast :: CoreExpr -> CoercionR -> CoreExpr -- Like GHC.Core.Utils.mkCast, but does a full reflexivity check. -- mkCast doesn't do that because the Simplifier does (in simplCast) -- But in SimpleOpt it's nice to kill those nested casts (#18112) mk_cast (Cast e co1) co2 = mk_cast e (co1 `mkTransCo` co2) mk_cast (Tick t e) co = Tick t (mk_cast e co) mk_cast e co | isReflexiveCo co = e | otherwise = Cast e co ---------------------- -- simple_app collects arguments for beta reduction simple_app :: HasDebugCallStack => SimpleOptEnv -> InExpr -> [SimpleClo] -> CoreExpr simple_app env (Var v) as | Just (env', e) <- lookupVarEnv (soe_inl env) v = simple_app (soeSetInScope env env') e as | let unf = idUnfolding v , isCompulsoryUnfolding (idUnfolding v) , isAlwaysActive (idInlineActivation v) -- See Note [Unfold compulsory unfoldings in LHSs] = simple_app (soeZapSubst env) (unfoldingTemplate unf) as | otherwise , let out_fn = lookupIdSubst (soe_subst env) v = finish_app env out_fn as simple_app env (App e1 e2) as = simple_app env e1 ((env, e2) : as) simple_app env e@(Lam {}) as@(_:_) | (bndrs, body) <- collectBinders e , let zapped_bndrs = zapLamBndrs (length as) bndrs -- Be careful to zap the lambda binders if necessary -- c.f. the Lam caes of simplExprF1 in GHC.Core.Opt.Simplify -- Lacking this zap caused #19347, when we had a redex -- (\ a b. K a b) e1 e2 -- where (as it happens) the eta-expanded K is produced by -- Note [Linear fields generalization] in GHC.Tc.Gen.Head = do_beta env zapped_bndrs body as where do_beta env (b:bs) body (a:as) | (env', mb_pr) <- simple_bind_pair env b Nothing a NotTopLevel = wrapLet mb_pr $ do_beta env' bs body as do_beta env bs body as = simple_app env (mkLams bs body) as simple_app env (Tick t e) as -- Okay to do "(Tick t e) x ==> Tick t (e x)"? | t `tickishScopesLike` SoftScope = mkTick t $ simple_app env e as -- (let x = e in b) a1 .. an => let x = e in (b a1 .. an) -- The let might appear there as a result of inlining -- e.g. let f = let x = e in b -- in f a1 a2 -- (#13208) -- However, do /not/ do this transformation for join points -- See Note [simple_app and join points] simple_app env (Let bind body) args = case simple_opt_bind env bind NotTopLevel of (env', Nothing) -> simple_app env' body args (env', Just bind') | isJoinBind bind' -> finish_app env expr' args | otherwise -> Let bind' (simple_app env' body args) where expr' = Let bind' (simple_opt_expr env' body) simple_app env e as = finish_app env (simple_opt_expr env e) as finish_app :: SimpleOptEnv -> OutExpr -> [SimpleClo] -> OutExpr finish_app _ fun [] = fun finish_app env fun (arg:args) = finish_app env (App fun (simple_opt_clo env arg)) args ---------------------- simple_opt_bind :: SimpleOptEnv -> InBind -> TopLevelFlag -> (SimpleOptEnv, Maybe OutBind) simple_opt_bind env (NonRec b r) top_level = (env', case mb_pr of Nothing -> Nothing Just (b,r) -> Just (NonRec b r)) where (b', r') = joinPointBinding_maybe b r `orElse` (b, r) (env', mb_pr) = simple_bind_pair env b' Nothing (env,r') top_level simple_opt_bind env (Rec prs) top_level = (env'', res_bind) where res_bind = Just (Rec (reverse rev_prs')) prs' = joinPointBindings_maybe prs `orElse` prs (env', bndrs') = subst_opt_bndrs env (map fst prs') (env'', rev_prs') = foldl' do_pr (env', []) (prs' `zip` bndrs') do_pr (env, prs) ((b,r), b') = (env', case mb_pr of Just pr -> pr : prs Nothing -> prs) where (env', mb_pr) = simple_bind_pair env b (Just b') (env,r) top_level ---------------------- simple_bind_pair :: SimpleOptEnv -> InVar -> Maybe OutVar -> SimpleClo -> TopLevelFlag -> (SimpleOptEnv, Maybe (OutVar, OutExpr)) -- (simple_bind_pair subst in_var out_rhs) -- either extends subst with (in_var -> out_rhs) -- or returns Nothing simple_bind_pair env@(SOE { soe_inl = inl_env, soe_subst = subst }) in_bndr mb_out_bndr clo@(rhs_env, in_rhs) top_level | Type ty <- in_rhs -- let a::* = TYPE ty in <body> , let out_ty = substTy (soe_subst rhs_env) ty = ASSERT2( isTyVar in_bndr, ppr in_bndr $$ ppr in_rhs ) (env { soe_subst = extendTvSubst subst in_bndr out_ty }, Nothing) | Coercion co <- in_rhs , let out_co = optCoercion (soe_co_opt_opts env) (getTCvSubst (soe_subst rhs_env)) co = ASSERT( isCoVar in_bndr ) (env { soe_subst = extendCvSubst subst in_bndr out_co }, Nothing) | ASSERT2( isNonCoVarId in_bndr, ppr in_bndr ) -- The previous two guards got rid of tyvars and coercions -- See Note [Core type and coercion invariant] in GHC.Core pre_inline_unconditionally = (env { soe_inl = extendVarEnv inl_env in_bndr clo }, Nothing) | otherwise = simple_out_bind_pair env in_bndr mb_out_bndr out_rhs occ active stable_unf top_level where stable_unf = isStableUnfolding (idUnfolding in_bndr) active = isAlwaysActive (idInlineActivation in_bndr) occ = idOccInfo in_bndr out_rhs | Just join_arity <- isJoinId_maybe in_bndr = simple_join_rhs join_arity | otherwise = simple_opt_clo env clo simple_join_rhs join_arity -- See Note [Preserve join-binding arity] = mkLams join_bndrs' (simple_opt_expr env_body join_body) where env0 = soeSetInScope env rhs_env (join_bndrs, join_body) = collectNBinders join_arity in_rhs (env_body, join_bndrs') = subst_opt_bndrs env0 join_bndrs pre_inline_unconditionally :: Bool pre_inline_unconditionally | isExportedId in_bndr = False | stable_unf = False | not active = False -- Note [Inline prag in simplOpt] | not (safe_to_inline occ) = False | otherwise = True -- Unconditionally safe to inline safe_to_inline :: OccInfo -> Bool safe_to_inline IAmALoopBreaker{} = False safe_to_inline IAmDead = True safe_to_inline OneOcc{ occ_in_lam = NotInsideLam , occ_n_br = 1 } = True safe_to_inline OneOcc{} = False safe_to_inline ManyOccs{} = False ------------------- simple_out_bind :: TopLevelFlag -> SimpleOptEnv -> (InVar, OutExpr) -> (SimpleOptEnv, Maybe (OutVar, OutExpr)) simple_out_bind top_level env@(SOE { soe_subst = subst }) (in_bndr, out_rhs) | Type out_ty <- out_rhs = ASSERT2( isTyVar in_bndr, ppr in_bndr $$ ppr out_ty $$ ppr out_rhs ) (env { soe_subst = extendTvSubst subst in_bndr out_ty }, Nothing) | Coercion out_co <- out_rhs = ASSERT( isCoVar in_bndr ) (env { soe_subst = extendCvSubst subst in_bndr out_co }, Nothing) | otherwise = simple_out_bind_pair env in_bndr Nothing out_rhs (idOccInfo in_bndr) True False top_level ------------------- simple_out_bind_pair :: SimpleOptEnv -> InId -> Maybe OutId -> OutExpr -> OccInfo -> Bool -> Bool -> TopLevelFlag -> (SimpleOptEnv, Maybe (OutVar, OutExpr)) simple_out_bind_pair env in_bndr mb_out_bndr out_rhs occ_info active stable_unf top_level | ASSERT2( isNonCoVarId in_bndr, ppr in_bndr ) -- Type and coercion bindings are caught earlier -- See Note [Core type and coercion invariant] post_inline_unconditionally = ( env' { soe_subst = extendIdSubst (soe_subst env) in_bndr out_rhs } , Nothing) | otherwise = ( env', Just (out_bndr, out_rhs) ) where (env', bndr1) = case mb_out_bndr of Just out_bndr -> (env, out_bndr) Nothing -> subst_opt_bndr env in_bndr out_bndr = add_info env' in_bndr top_level out_rhs bndr1 post_inline_unconditionally :: Bool post_inline_unconditionally | isExportedId in_bndr = False -- Note [Exported Ids and trivial RHSs] | stable_unf = False -- Note [Stable unfoldings and postInlineUnconditionally] | not active = False -- in GHC.Core.Opt.Simplify.Utils | is_loop_breaker = False -- If it's a loop-breaker of any kind, don't inline -- because it might be referred to "earlier" | exprIsTrivial out_rhs = True | coercible_hack = True | otherwise = False is_loop_breaker = isWeakLoopBreaker occ_info -- See Note [Getting the map/coerce RULE to work] coercible_hack | (Var fun, args) <- collectArgs out_rhs , Just dc <- isDataConWorkId_maybe fun , dc `hasKey` heqDataConKey || dc `hasKey` coercibleDataConKey = all exprIsTrivial args | otherwise = False {- Note [Exported Ids and trivial RHSs] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We obviously do not want to unconditionally inline an Id that is exported. In GHC.Core.Opt.Simplify.Utils, Note [Top level and postInlineUnconditionally], we explain why we don't inline /any/ top-level things unconditionally, even trivial ones. But we do here! Why? In the simple optimiser * We do no rule rewrites * We do no call-site inlining Those differences obviate the reasons for not inlining a trivial rhs, and increase the benefit for doing so. So we unconditionally inline trivial rhss here. Note [Preserve join-binding arity] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Be careful /not/ to eta-reduce the RHS of a join point, lest we lose the join-point arity invariant. #15108 was caused by simplifying the RHS with simple_opt_expr, which does eta-reduction. Solution: simplify the RHS of a join point by simplifying under the lambdas (which of course should be there). Note [simple_app and join points] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In general for let-bindings we can do this: (let { x = e } in b) a ==> let { x = e } in b a But not for join points! For two reasons: - We would need to push the continuation into the RHS: (join { j = e } in b) a ==> let { j' = e a } in b[j'/j] a NB ----^^ and also change the type of j, hence j'. That's a bit sophisticated for the very simple optimiser. - We might end up with something like join { j' = e a } in (case blah of ) ( True -> j' void# ) a ( False -> blah ) and now the call to j' doesn't look like a tail call, and Lint may reject. I say "may" because this is /explicitly/ allowed in the "Compiling without Continuations" paper (Section 3, "Managing \Delta"). But GHC currently does not allow this slightly-more-flexible form. See GHC.Core Note [Join points are less general than the paper]. The simple thing to do is to disable this transformation for join points in the simple optimiser Note [The Let-Unfoldings Invariant] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A program has the Let-Unfoldings property iff: - For every let-bound variable f, whether top-level or nested, whether recursive or not: - Both the binding Id of f, and every occurrence Id of f, has an idUnfolding. - For non-INLINE things, that unfolding will be f's right hand sids - For INLINE things (which have a "stable" unfolding) that unfolding is semantically equivalent to f's RHS, but derived from the original RHS of f rather that its current RHS. Informally, we can say that in a program that has the Let-Unfoldings property, all let-bound Id's have an explicit unfolding attached to them. Currently, the simplifier guarantees the Let-Unfoldings invariant for anything it outputs. -} ---------------------- subst_opt_bndrs :: SimpleOptEnv -> [InVar] -> (SimpleOptEnv, [OutVar]) subst_opt_bndrs env bndrs = mapAccumL subst_opt_bndr env bndrs subst_opt_bndr :: SimpleOptEnv -> InVar -> (SimpleOptEnv, OutVar) subst_opt_bndr env bndr | isTyVar bndr = (env { soe_subst = subst_tv }, tv') | isCoVar bndr = (env { soe_subst = subst_cv }, cv') | otherwise = subst_opt_id_bndr env bndr where subst = soe_subst env (subst_tv, tv') = substTyVarBndr subst bndr (subst_cv, cv') = substCoVarBndr subst bndr subst_opt_id_bndr :: SimpleOptEnv -> InId -> (SimpleOptEnv, OutId) -- Nuke all fragile IdInfo, unfolding, and RULES; it gets added back later by -- add_info. -- -- Rather like SimplEnv.substIdBndr -- -- It's important to zap fragile OccInfo (which GHC.Core.Subst.substIdBndr -- carefully does not do) because simplOptExpr invalidates it subst_opt_id_bndr env@(SOE { soe_subst = subst, soe_inl = inl }) old_id = (env { soe_subst = new_subst, soe_inl = new_inl }, new_id) where Subst in_scope id_subst tv_subst cv_subst = subst id1 = uniqAway in_scope old_id id2 = updateIdTypeAndMult (substTy subst) id1 new_id = zapFragileIdInfo id2 -- Zaps rules, unfolding, and fragile OccInfo -- The unfolding and rules will get added back later, by add_info new_in_scope = in_scope `extendInScopeSet` new_id no_change = new_id == old_id -- Extend the substitution if the unique has changed, -- See the notes with substTyVarBndr for the delSubstEnv new_id_subst | no_change = delVarEnv id_subst old_id | otherwise = extendVarEnv id_subst old_id (Var new_id) new_subst = Subst new_in_scope new_id_subst tv_subst cv_subst new_inl = delVarEnv inl old_id ---------------------- add_info :: SimpleOptEnv -> InVar -> TopLevelFlag -> OutExpr -> OutVar -> OutVar add_info env old_bndr top_level new_rhs new_bndr | isTyVar old_bndr = new_bndr | otherwise = lazySetIdInfo new_bndr new_info where subst = soe_subst env uf_opts = soe_uf_opts env old_info = idInfo old_bndr -- Add back in the rules and unfolding which were -- removed by zapFragileIdInfo in subst_opt_id_bndr. -- -- See Note [The Let-Unfoldings Invariant] new_info = idInfo new_bndr `setRuleInfo` new_rules `setUnfoldingInfo` new_unfolding old_rules = ruleInfo old_info new_rules = substSpec subst new_bndr old_rules old_unfolding = unfoldingInfo old_info new_unfolding | isStableUnfolding old_unfolding = substUnfolding subst old_unfolding | otherwise = unfolding_from_rhs unfolding_from_rhs = mkUnfolding uf_opts InlineRhs (isTopLevel top_level) False -- may be bottom or not new_rhs simpleUnfoldingFun :: IdUnfoldingFun simpleUnfoldingFun id | isAlwaysActive (idInlineActivation id) = idUnfolding id | otherwise = noUnfolding wrapLet :: Maybe (Id,CoreExpr) -> CoreExpr -> CoreExpr wrapLet Nothing body = body wrapLet (Just (b,r)) body = Let (NonRec b r) body {- Note [Inline prag in simplOpt] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If there's an INLINE/NOINLINE pragma that restricts the phase in which the binder can be inlined, we don't inline here; after all, we don't know what phase we're in. Here's an example foo :: Int -> Int -> Int {-# INLINE foo #-} foo m n = inner m where {-# INLINE [1] inner #-} inner m = m+n bar :: Int -> Int bar n = foo n 1 When inlining 'foo' in 'bar' we want the let-binding for 'inner' to remain visible until Phase 1 Note [Unfold compulsory unfoldings in LHSs] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When the user writes `RULES map coerce = coerce` as a rule, the rule will only ever match if simpleOptExpr replaces coerce by its unfolding on the LHS, because that is the core that the rule matching engine will find. So do that for everything that has a compulsory unfolding. Also see Note [Desugaring coerce as cast] in GHC.HsToCore. However, we don't want to inline 'seq', which happens to also have a compulsory unfolding, so we only do this unfolding only for things that are always-active. See Note [User-defined RULES for seq] in GHC.Types.Id.Make. Note [Getting the map/coerce RULE to work] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We wish to allow the "map/coerce" RULE to fire: {-# RULES "map/coerce" map coerce = coerce #-} The naive core produced for this is forall a b (dict :: Coercible * a b). map @a @b (coerce @a @b @dict) = coerce @[a] @[b] @dict' where dict' :: Coercible [a] [b] dict' = ... This matches literal uses of `map coerce` in code, but that's not what we want. We want it to match, say, `map MkAge` (where newtype Age = MkAge Int) too. Some of this is addressed by compulsorily unfolding coerce on the LHS, yielding forall a b (dict :: Coercible * a b). map @a @b (\(x :: a) -> case dict of MkCoercible (co :: a ~R# b) -> x |> co) = ... Getting better. But this isn't exactly what gets produced. This is because Coercible essentially has ~R# as a superclass, and superclasses get eagerly extracted during solving. So we get this: forall a b (dict :: Coercible * a b). case Coercible_SCSel @* @a @b dict of _ [Dead] -> map @a @b (\(x :: a) -> case dict of MkCoercible (co :: a ~R# b) -> x |> co) = ... Unfortunately, this still abstracts over a Coercible dictionary. We really want it to abstract over the ~R# evidence. So, we have Desugar.unfold_coerce, which transforms the above to (see also Note [Desugaring coerce as cast] in Desugar) forall a b (co :: a ~R# b). let dict = MkCoercible @* @a @b co in case Coercible_SCSel @* @a @b dict of _ [Dead] -> map @a @b (\(x :: a) -> case dict of MkCoercible (co :: a ~R# b) -> x |> co) = let dict = ... in ... Now, we need simpleOptExpr to fix this up. It does so by taking three separate actions: 1. Inline certain non-recursive bindings. The choice whether to inline is made in simple_bind_pair. Note the rather specific check for MkCoercible in there. 2. Stripping case expressions like the Coercible_SCSel one. See the `Case` case of simple_opt_expr's `go` function. 3. Look for case expressions that unpack something that was just packed and inline them. This is also done in simple_opt_expr's `go` function. This is all a fair amount of special-purpose hackery, but it's for a good cause. And it won't hurt other RULES and such that it comes across. ************************************************************************ * * Join points * * ************************************************************************ -} {- Note [Strictness and join points] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Suppose we have let f = \x. if x>200 then e1 else e1 and we know that f is strict in x. Then if we subsequently discover that f is an arity-2 join point, we'll eta-expand it to let f = \x y. if x>200 then e1 else e1 and now it's only strict if applied to two arguments. So we should adjust the strictness info. A more common case is when f = \x. error ".." and again its arity increases (#15517) -} -- | Returns Just (bndr,rhs) if the binding is a join point: -- If it's a JoinId, just return it -- If it's not yet a JoinId but is always tail-called, -- make it into a JoinId and return it. -- In the latter case, eta-expand the RHS if necessary, to make the -- lambdas explicit, as is required for join points -- -- Precondition: the InBndr has been occurrence-analysed, -- so its OccInfo is valid joinPointBinding_maybe :: InBndr -> InExpr -> Maybe (InBndr, InExpr) joinPointBinding_maybe bndr rhs | not (isId bndr) = Nothing | isJoinId bndr = Just (bndr, rhs) | AlwaysTailCalled join_arity <- tailCallInfo (idOccInfo bndr) , (bndrs, body) <- etaExpandToJoinPoint join_arity rhs , let str_sig = idStrictness bndr str_arity = count isId bndrs -- Strictness demands are for Ids only join_bndr = bndr `asJoinId` join_arity `setIdStrictness` etaConvertStrictSig str_arity str_sig = Just (join_bndr, mkLams bndrs body) | otherwise = Nothing joinPointBindings_maybe :: [(InBndr, InExpr)] -> Maybe [(InBndr, InExpr)] joinPointBindings_maybe bndrs = mapM (uncurry joinPointBinding_maybe) bndrs {- ********************************************************************* * * exprIsConApp_maybe * * ************************************************************************ Note [exprIsConApp_maybe] ~~~~~~~~~~~~~~~~~~~~~~~~~ exprIsConApp_maybe is a very important function. There are two principal uses: * case e of { .... } * cls_op e, where cls_op is a class operation In both cases you want to know if e is of form (C e1..en) where C is a data constructor. However e might not *look* as if Note [exprIsConApp_maybe on literal strings] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ See #9400 and #13317. Conceptually, a string literal "abc" is just ('a':'b':'c':[]), but in Core they are represented as unpackCString# "abc"# by GHC.Core.Make.mkStringExprFS, or unpackCStringUtf8# when the literal contains multi-byte UTF8 characters. For optimizations we want to be able to treat it as a list, so they can be decomposed when used in a case-statement. exprIsConApp_maybe detects those calls to unpackCString# and returns: Just (':', [Char], ['a', unpackCString# "bc"]). We need to be careful about UTF8 strings here. ""# contains a ByteString, so we must parse it back into a FastString to split off the first character. That way we can treat unpackCString# and unpackCStringUtf8# in the same way. We must also be careful about lvl = "foo"# ...(unpackCString# lvl)... to ensure that we see through the let-binding for 'lvl'. Hence the (exprIsLiteral_maybe .. arg) in the guard before the call to dealWithStringLiteral. Note [Push coercions in exprIsConApp_maybe] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In #13025 I found a case where we had op (df @t1 @t2) -- op is a ClassOp where df = (/\a b. K e1 e2) |> g To get this to come out we need to simplify on the fly ((/\a b. K e1 e2) |> g) @t1 @t2 Hence the use of pushCoArgs. Note [exprIsConApp_maybe on data constructors with wrappers] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Problem: - some data constructors have wrappers - these wrappers inline late (see MkId Note [Activation for data constructor wrappers]) - but we still want case-of-known-constructor to fire early. Example: data T = MkT !Int $WMkT n = case n of n' -> MkT n' -- Wrapper for MkT foo x = case $WMkT e of MkT y -> blah Here we want the case-of-known-constructor transformation to fire, giving foo x = case e of x' -> let y = x' in blah Here's how exprIsConApp_maybe achieves this: 0. Start with scrutinee = $WMkT e 1. Inline $WMkT on-the-fly. That's why data-constructor wrappers are marked as expandable. (See GHC.Core.Utils.isExpandableApp.) Now we have scrutinee = (\n. case n of n' -> MkT n') e 2. Beta-reduce the application, generating a floated 'let'. See Note [beta-reduction in exprIsConApp_maybe] below. Now we have scrutinee = case n of n' -> MkT n' with floats {Let n = e} 3. Float the "case x of x' ->" binding out. Now we have scrutinee = MkT n' with floats {Let n = e; case n of n' ->} And now we have a known-constructor MkT that we can return. Notice that both (2) and (3) require exprIsConApp_maybe to gather and return a bunch of floats, both let and case bindings. Note that this strategy introduces some subtle scenarios where a data-con wrapper can be replaced by a data-con worker earlier than we’d like, see Note [exprIsConApp_maybe for data-con wrappers: tricky corner]. Note [beta-reduction in exprIsConApp_maybe] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The unfolding a definition (_e.g._ a let-bound variable or a datacon wrapper) is typically a function. For instance, take the wrapper for MkT in Note [exprIsConApp_maybe on data constructors with wrappers]: $WMkT n = case n of { n' -> T n' } If `exprIsConApp_maybe` is trying to analyse `$MkT arg`, upon unfolding of $MkT, it will see (\n -> case n of { n' -> T n' }) arg In order to go progress, `exprIsConApp_maybe` must perform a beta-reduction. We don't want to blindly substitute `arg` in the body of the function, because it duplicates work. We can (and, in fact, used to) substitute `arg` in the body, but only when `arg` is a variable (or something equally work-free). But, because of Note [exprIsConApp_maybe on data constructors with wrappers], 'exprIsConApp_maybe' now returns floats. So, instead, we can beta-reduce _always_: (\x -> body) arg Is transformed into let x = arg in body Which, effectively, means emitting a float `let x = arg` and recursively analysing the body. For newtypes, this strategy requires that their wrappers have compulsory unfoldings. Suppose we have newtype T a b where MkT :: a -> T b a -- Note args swapped This defines a worker function MkT, a wrapper function $WMkT, and an axT: $WMkT :: forall a b. a -> T b a $WMkT = /\b a. \(x:a). MkT a b x -- A real binding MkT :: forall a b. a -> T a b MkT = /\a b. \(x:a). x |> (ax a b) -- A compulsory unfolding axiom axT :: a ~R# T a b Now we are optimising case $WMkT (I# 3) |> sym axT of I# y -> ... we clearly want to simplify this. If $WMkT did not have a compulsory unfolding, we would end up with let a = I#3 in case a of I# y -> ... because in general, we do this on-the-fly beta-reduction (\x. e) blah --> let x = blah in e and then float the let. (Substitution would risk duplicating 'blah'.) But if the case-of-known-constructor doesn't actually fire (i.e. exprIsConApp_maybe does not return Just) then nothing happens, and nothing will happen the next time either. See test T16254, which checks the behavior of newtypes. Note [Don't float join points] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ exprIsConApp_maybe should succeed on let v = e in Just v returning [x=e] as one of the [FloatBind]. But it must NOT succeed on join j x = rhs in Just v because join-points can't be gaily floated. Consider case (join j x = rhs in Just) of K p q -> blah We absolutely must not "simplify" this to join j x = rhs in blah because j's return type is (Maybe t), quite different to blah's. You might think this could never happen, because j can't be tail-called in the body if the body returns a constructor. But in !3113 we had a /dead/ join point (which is not illegal), and its return type was wonky. The simple thing is not to float a join point. The next iteration of the simplifier will sort everything out. And it there is a join point, the chances are that the body is not a constructor application, so failing faster is good. Note [exprIsConApp_maybe for data-con wrappers: tricky corner] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Generally speaking * exprIsConApp_maybe honours the inline phase; that is, it does not look inside the unfolding for an Id unless its unfolding is active in this phase. That phase-sensitivity is expressed in the InScopeEnv (specifically, the IdUnfoldingFun component of the InScopeEnv) passed to exprIsConApp_maybe. * Data-constructor wrappers are active only in phase 0 (the last phase); see Note [Activation for data constructor wrappers] in GHC.Types.Id.Make. On the face of it that means that exprIsConApp_maybe won't look inside data constructor wrappers until phase 0. But that seems pretty Bad. So we cheat. For data con wrappers we unconditionally look inside its unfolding, regardless of phase, so that we get case-of-known-constructor to fire in every phase. Perhaps unsurprisingly, this cheating can backfire. An example: data T = C !A B foo p q = let x = C e1 e2 in seq x $ f x {-# RULE "wurble" f (C a b) = b #-} In Core, the RHS of foo is let x = $WC e1 e2 in case x of y { C _ _ -> f x } and after doing a binder swap and inlining x, we have: case $WC e1 e2 of y { C _ _ -> f y } Case-of-known-constructor fires, but now we have to reconstruct a binding for `y` (which was dead before the binder swap) on the RHS of the case alternative. Naturally, we’ll use the worker: case e1 of a { DEFAULT -> let y = C a e2 in f y } and after inlining `y`, we have: case e1 of a { DEFAULT -> f (C a e2) } Now we might hope the "wurble" rule would fire, but alas, it will not: we have replaced $WC with C, but the (desugared) rule matches on $WC! We weren’t supposed to inline $WC yet for precisely that reason (see Note [Activation for data constructor wrappers]), but our cheating in exprIsConApp_maybe came back to bite us. This is rather unfortunate, especially since this can happen inside stable unfoldings as well as ordinary code (which really happened, see !3041). But there is no obvious solution except to delay case-of-known-constructor on data-con wrappers, and that cure would be worse than the disease. This Note exists solely to document the problem. -} data ConCont = CC [CoreExpr] Coercion -- Substitution already applied -- | Returns @Just ([b1..bp], dc, [t1..tk], [x1..xn])@ if the argument -- expression is a *saturated* constructor application of the form @let b1 in -- .. let bp in dc t1..tk x1 .. xn@, where t1..tk are the -- *universally-quantified* type args of 'dc'. Floats can also be (and most -- likely are) single-alternative case expressions. Why does -- 'exprIsConApp_maybe' return floats? We may have to look through lets and -- cases to detect that we are in the presence of a data constructor wrapper. In -- this case, we need to return the lets and cases that we traversed. See Note -- [exprIsConApp_maybe on data constructors with wrappers]. Data constructor wrappers -- are unfolded late, but we really want to trigger case-of-known-constructor as -- early as possible. See also Note [Activation for data constructor wrappers] -- in "GHC.Types.Id.Make". -- -- We also return the incoming InScopeSet, augmented with -- the binders from any [FloatBind] that we return exprIsConApp_maybe :: HasDebugCallStack => InScopeEnv -> CoreExpr -> Maybe (InScopeSet, [FloatBind], DataCon, [Type], [CoreExpr]) exprIsConApp_maybe (in_scope, id_unf) expr = go (Left in_scope) [] expr (CC [] (mkRepReflCo (exprType expr))) where go :: Either InScopeSet Subst -- Left in-scope means "empty substitution" -- Right subst means "apply this substitution to the CoreExpr" -- NB: in the call (go subst floats expr cont) -- the substitution applies to 'expr', but /not/ to 'floats' or 'cont' -> [FloatBind] -> CoreExpr -> ConCont -- Notice that the floats here are in reverse order -> Maybe (InScopeSet, [FloatBind], DataCon, [Type], [CoreExpr]) go subst floats (Tick t expr) cont | not (tickishIsCode t) = go subst floats expr cont go subst floats (Cast expr co1) (CC args co2) | Just (args', m_co1') <- pushCoArgs (subst_co subst co1) args -- See Note [Push coercions in exprIsConApp_maybe] = case m_co1' of MCo co1' -> go subst floats expr (CC args' (co1' `mkTransCo` co2)) MRefl -> go subst floats expr (CC args' co2) go subst floats (App fun arg) (CC args co) = go subst floats fun (CC (subst_expr subst arg : args) co) go subst floats (Lam bndr body) (CC (arg:args) co) | exprIsTrivial arg -- Don't duplicate stuff! = go (extend subst bndr arg) floats body (CC args co) | otherwise = let (subst', bndr') = subst_bndr subst bndr float = FloatLet (NonRec bndr' arg) in go subst' (float:floats) body (CC args co) go subst floats (Let (NonRec bndr rhs) expr) cont | not (isJoinId bndr) -- Crucial guard! See Note [Don't float join points] = let rhs' = subst_expr subst rhs (subst', bndr') = subst_bndr subst bndr float = FloatLet (NonRec bndr' rhs') in go subst' (float:floats) expr cont go subst floats (Case scrut b _ [Alt con vars expr]) cont = let scrut' = subst_expr subst scrut (subst', b') = subst_bndr subst b (subst'', vars') = subst_bndrs subst' vars float = FloatCase scrut' b' con vars' in go subst'' (float:floats) expr cont go (Right sub) floats (Var v) cont = go (Left (substInScope sub)) floats (lookupIdSubst sub v) cont go (Left in_scope) floats (Var fun) cont@(CC args co) | Just con <- isDataConWorkId_maybe fun , count isValArg args == idArity fun = succeedWith in_scope floats $ pushCoDataCon con args co -- Look through data constructor wrappers: they inline late (See Note -- [Activation for data constructor wrappers]) but we want to do -- case-of-known-constructor optimisation eagerly (see Note -- [exprIsConApp_maybe on data constructors with wrappers]). | isDataConWrapId fun , let rhs = uf_tmpl (realIdUnfolding fun) = go (Left in_scope) floats rhs cont -- Look through dictionary functions; see Note [Unfolding DFuns] | DFunUnfolding { df_bndrs = bndrs, df_con = con, df_args = dfun_args } <- unfolding , bndrs `equalLength` args -- See Note [DFun arity check] , let subst = mkOpenSubst in_scope (bndrs `zip` args) = succeedWith in_scope floats $ pushCoDataCon con (map (substExpr subst) dfun_args) co -- Look through unfoldings, but only arity-zero one; -- if arity > 0 we are effectively inlining a function call, -- and that is the business of callSiteInline. -- In practice, without this test, most of the "hits" were -- CPR'd workers getting inlined back into their wrappers, | idArity fun == 0 , Just rhs <- expandUnfolding_maybe unfolding , let in_scope' = extendInScopeSetSet in_scope (exprFreeVars rhs) = go (Left in_scope') floats rhs cont -- See Note [exprIsConApp_maybe on literal strings] | (fun `hasKey` unpackCStringIdKey) || (fun `hasKey` unpackCStringUtf8IdKey) , [arg] <- args , Just (LitString str) <- exprIsLiteral_maybe (in_scope, id_unf) arg = succeedWith in_scope floats $ dealWithStringLiteral fun str co where unfolding = id_unf fun go _ _ _ _ = Nothing succeedWith :: InScopeSet -> [FloatBind] -> Maybe (DataCon, [Type], [CoreExpr]) -> Maybe (InScopeSet, [FloatBind], DataCon, [Type], [CoreExpr]) succeedWith in_scope rev_floats x = do { (con, tys, args) <- x ; let floats = reverse rev_floats ; return (in_scope, floats, con, tys, args) } ---------------------------- -- Operations on the (Either InScopeSet GHC.Core.Subst) -- The Left case is wildly dominant subst_co (Left {}) co = co subst_co (Right s) co = GHC.Core.Subst.substCo s co subst_expr (Left {}) e = e subst_expr (Right s) e = substExpr s e subst_bndr msubst bndr = (Right subst', bndr') where (subst', bndr') = substBndr subst bndr subst = case msubst of Left in_scope -> mkEmptySubst in_scope Right subst -> subst subst_bndrs subst bs = mapAccumL subst_bndr subst bs extend (Left in_scope) v e = Right (extendSubst (mkEmptySubst in_scope) v e) extend (Right s) v e = Right (extendSubst s v e) -- See Note [exprIsConApp_maybe on literal strings] dealWithStringLiteral :: Var -> BS.ByteString -> Coercion -> Maybe (DataCon, [Type], [CoreExpr]) -- This is not possible with user-supplied empty literals, GHC.Core.Make.mkStringExprFS -- turns those into [] automatically, but just in case something else in GHC -- generates a string literal directly. dealWithStringLiteral _ str co | BS.null str = pushCoDataCon nilDataCon [Type charTy] co dealWithStringLiteral fun str co = let strFS = mkFastStringByteString str char = mkConApp charDataCon [mkCharLit (headFS strFS)] charTail = BS.tail (bytesFS strFS) -- In singleton strings, just add [] instead of unpackCstring# ""#. rest = if BS.null charTail then mkConApp nilDataCon [Type charTy] else App (Var fun) (Lit (LitString charTail)) in pushCoDataCon consDataCon [Type charTy, char, rest] co {- Note [Unfolding DFuns] ~~~~~~~~~~~~~~~~~~~~~~ DFuns look like df :: forall a b. (Eq a, Eq b) -> Eq (a,b) df a b d_a d_b = MkEqD (a,b) ($c1 a b d_a d_b) ($c2 a b d_a d_b) So to split it up we just need to apply the ops $c1, $c2 etc to the very same args as the dfun. It takes a little more work to compute the type arguments to the dictionary constructor. Note [DFun arity check] ~~~~~~~~~~~~~~~~~~~~~~~ Here we check that the total number of supplied arguments (including type args) matches what the dfun is expecting. This may be *less* than the ordinary arity of the dfun: see Note [DFun unfoldings] in GHC.Core -} exprIsLiteral_maybe :: InScopeEnv -> CoreExpr -> Maybe Literal -- Same deal as exprIsConApp_maybe, but much simpler -- Nevertheless we do need to look through unfoldings for -- Integer and string literals, which are vigorously hoisted to top level -- and not subsequently inlined exprIsLiteral_maybe env@(_, id_unf) e = case e of Lit l -> Just l Tick _ e' -> exprIsLiteral_maybe env e' -- dubious? Var v | Just rhs <- expandUnfolding_maybe (id_unf v) , Just l <- exprIsLiteral_maybe env rhs -> Just l Var v | Just rhs <- expandUnfolding_maybe (id_unf v) , Just b <- matchBignum env rhs -> Just b e | Just b <- matchBignum env e -> Just b | otherwise -> Nothing where matchBignum env e | Just (_env,_fb,dc,_tys,[arg]) <- exprIsConApp_maybe env e , Just (LitNumber _ i) <- exprIsLiteral_maybe env arg = if | dc == naturalNSDataCon -> Just (mkLitNatural i) | dc == integerISDataCon -> Just (mkLitInteger i) | otherwise -> Nothing | otherwise = Nothing {- Note [exprIsLambda_maybe] ~~~~~~~~~~~~~~~~~~~~~~~~~~ exprIsLambda_maybe will, given an expression `e`, try to turn it into the form `Lam v e'` (returned as `Just (v,e')`). Besides using lambdas, it looks through casts (using the Push rule), and it unfolds function calls if the unfolding has a greater arity than arguments are present. Currently, it is used in GHC.Core.Rules.match, and is required to make "map coerce = coerce" match. -} exprIsLambda_maybe :: InScopeEnv -> CoreExpr -> Maybe (Var, CoreExpr,[CoreTickish]) -- See Note [exprIsLambda_maybe] -- The simple case: It is a lambda already exprIsLambda_maybe _ (Lam x e) = Just (x, e, []) -- Still straightforward: Ticks that we can float out of the way exprIsLambda_maybe (in_scope_set, id_unf) (Tick t e) | tickishFloatable t , Just (x, e, ts) <- exprIsLambda_maybe (in_scope_set, id_unf) e = Just (x, e, t:ts) -- Also possible: A casted lambda. Push the coercion inside exprIsLambda_maybe (in_scope_set, id_unf) (Cast casted_e co) | Just (x, e,ts) <- exprIsLambda_maybe (in_scope_set, id_unf) casted_e -- Only do value lambdas. -- this implies that x is not in scope in gamma (makes this code simpler) , not (isTyVar x) && not (isCoVar x) , ASSERT( not $ x `elemVarSet` tyCoVarsOfCo co) True , Just (x',e') <- pushCoercionIntoLambda in_scope_set x e co , let res = Just (x',e',ts) = --pprTrace "exprIsLambda_maybe:Cast" (vcat [ppr casted_e,ppr co,ppr res)]) res -- Another attempt: See if we find a partial unfolding exprIsLambda_maybe (in_scope_set, id_unf) e | (Var f, as, ts) <- collectArgsTicks tickishFloatable e , idArity f > count isValArg as -- Make sure there is hope to get a lambda , Just rhs <- expandUnfolding_maybe (id_unf f) -- Optimize, for beta-reduction , let e' = simpleOptExprWith defaultSimpleOpts (mkEmptySubst in_scope_set) (rhs `mkApps` as) -- Recurse, because of possible casts , Just (x', e'', ts') <- exprIsLambda_maybe (in_scope_set, id_unf) e' , let res = Just (x', e'', ts++ts') = -- pprTrace "exprIsLambda_maybe:Unfold" (vcat [ppr e, ppr (x',e'')]) res exprIsLambda_maybe _ _e = -- pprTrace "exprIsLambda_maybe:Fail" (vcat [ppr _e]) Nothing