6.10.3. Quantified constraints¶

QuantifiedConstraints
¶ Since: 8.6.1 Allow constraints to quantify over types.
The extension QuantifiedConstraints
introduces quantified constraints,
which give a new level of expressiveness in constraints. For example, consider
data Rose f a = Branch a (f (Rose f a))
instance (Eq a, ???) => Eq (Rose f a)
where
(Branch x1 c1) == (Branch x2 c2)
= x1==x1 && c1==c2
From the x1==x2
we need Eq a
, which is fine. From c1==c2
we need Eq (f (Rose f a))
which
is not fine in Haskell today; we have no way to solve such a constraint.
QuantifiedConstraints
lets us write this
instance (Eq a, forall b. (Eq b) => Eq (f b))
=> Eq (Rose f a)
where
(Branch x1 c1) == (Branch x2 c2)
= x1==x1 && c1==c2
Here, the quantified constraint forall b. (Eq b) => Eq (f b)
behaves
a bit like a local instance declaration, and makes the instance typeable.
The paper Quantified class constraints (by Bottu, Karachalias, Schrijvers, Oliveira, Wadler, Haskell Symposium 2017) describes this feature in technical detail, with examples, and so is a primary reference source for this feature.
6.10.3.1. Motivation¶
Introducing quantified constraints offers two main benefits:
Firstly, they enable terminating resolution where this was not possible before. Consider for instance the following instance declaration for the general rose datatype
data Rose f x = Rose x (f (Rose f x)) instance (Eq a, forall b. Eq b => Eq (f b)) => Eq (Rose f a) where (Rose x1 rs1) == (Rose x2 rs2) = x1 == x2 && rs1 == rs2
This extension allows us to write constraints of the form
forall b. Eq b => Eq (f b)
, which is needed to solve theEq (f (Rose f x))
constraint arising from the second usage of the(==)
method.Secondly, quantified constraints allow for more concise and precise specifications. As an example, consider the MTL type class for monad transformers:
class Trans t where lift :: Monad m => m a > (t m) a
The developer knows that a monad transformer takes a monad
m
into a new monadt m
. But this property is not formally specified in the above declaration. This omission becomes an issue when defining monad transformer composition:newtype (t1 * t2) m a = C { runC :: t1 (t2 m) a } instance (Trans t1, Trans t2) => Trans (t1 * t2) where lift = C . lift . lift
The goal here is to
lift
from monadm
tot2 m
and thenlift
this again intot1 (t2 m)
. However, this secondlift
can only be accepted when(t2 m)
is a monad and there is no way of establishing that this fact universally holds.Quantified constraints enable this property to be made explicit in the
Trans
class declaration:class (forall m. Monad m => Monad (t m)) => Trans t where lift :: Monad m => m a > (t m) a
This idea is very old; see Section 7 of Derivable type classes.
6.10.3.2. Syntax changes¶
Haskell 2010 defines a context
(the bit to the left of =>
in a type) like this
context ::= class
 ( class1, ..., classn )
class ::= qtycls tyvar
 qtycls (tyvar atype1 ... atypen)
We extend class
(warning: this is a rather confusingly named nonterminal symbol) with two extra forms, namely precisely what can appear in an instance declaration
class ::= ...
 [context =>] qtycls inst
 [context =>] tyvar inst
The definition of inst
is unchanged from the Haskell Report (roughly, just a type).
The context =>
part is optional. That is the only syntactic change to the language.
Notes:
Where GHC allows extensions in instance declarations we allow exactly the same extensions to this new form of
class
. Specifically, withExplicitForAll
andMultiParamTypeClasses
the syntax becomesclass ::= ...  [forall tyvars .] [context =>] qtycls inst1 ... instn  [forall tyvars .] [context =>] tyvar inst1 ... instn
Note that an explicit
forall
is often absolutely essential. Consider the rosetree exampleinstance (Eq a, forall b. Eq b => Eq (f b)) => Eq (Rose f a) where ...
Without the
forall b
, the type variableb
would be quantified over the whole instance declaration, which is not what is intended.One of these new quantified constraints can appear anywhere that any other constraint can, not just in instance declarations. Notably, it can appear in a type signature for a value binding, data constructor, or expression. For example
f :: (Eq a, forall b. Eq b => Eq (f b)) => Rose f a > Rose f a > Bool f t1 t2 = not (t1 == t2)
The form with a type variable at the head allows this:
instance (forall xx. c (Free c xx)) => Monad (Free c) where Free f >>= g = f g
See Iceland Jack’s summary. The key point is that the bit to the right of the
=>
may be headed by a type variable (c
in this case), rather than a class. It should not be one of the forall’d variables, though.(NB: this goes beyond what is described in the paper, but does not seem to introduce any new technical difficulties.)
6.10.3.4. Superclasses¶
Suppose we have:
f :: forall m. (forall a. Ord a => Ord (m a)) => m Int > Bool
f x = x == x
From the x==x
we need an Eq (m Int)
constraint, but the context only gives us a way to figure out Ord (m a)
constraints. But from the given constraint forall a. Ord a => Ord (m a)
we derive a second given constraint forall a. Ord a => Eq (m a)
, and from that we can readily solve Eq (m Int)
. This process is very similar to the way that superclasses already work: given an Ord a
constraint we derive a second given Eq a
constraint.
NB: This treatment of superclasses goes beyond the paper, but is specifically desired by users.
6.10.3.5. Overlap¶
Quantified constraints can potentially lead to overlapping local axioms. Consider for instance the following example:
class A a where {}
class B a where {}
class C a where {}
class (A a => C a) => D a where {}
class (B a => C a) => E a where {}
class C a => F a where {}
instance (B a, D a, E a) => F a where {}
When type checking the instance declaration for F a
,
we need to check that the superclass C
of F
holds.
We thus try to entail the constraint C a
under the theory containing:
 The instance axioms :
(B a, D a, E a) => F a
 The local axioms from the instance context :
B a
,D a
andE a
 The closure of the superclass relation over these local axioms :
A a => C a
andB a => C a
However, the A a => C a
and B a => C a
axioms both match the wanted constraint C a
.
There are several possible approaches for handling these overlapping local axioms:
Pick first. We can simply select the first matching axiom we encounter. In the above example, this would be
A a => C a
. We’d then need to entailA a
, for which we have no matching axioms available, causing the above program to be rejected.But suppose we made a slight adjustment to the order of the instance context, putting
E a
beforeD a
:instance (B a, E a, D a) => F a where {}
The first matching axiom we encounter while entailing
C a
, isB a => C a
. We have a local axiomB a
available, so now the program is suddenly accepted. This behaviour, where the ordering of an instance context determines whether or not the program is accepted, seems rather confusing for the developer.Reject if in doubt. An alternative approach would be to check for overlapping axioms, when solving a constraint. When multiple matching axioms are discovered, we reject the program. This approach is a bit conservative, in that it may reject working programs. But it seem much more transparent towards the developer, who can be presented with a clear message, explaining why the program is rejected.
Backtracking. Lastly, a simple form of backtracking could be introduced. We simply select the first matching axiom we encounter and when the entailment fails, we backtrack and look for other axioms that might match the wanted constraint.
This seems the most intuitive and transparent approach towards the developer, who no longer needs to concern himself with the fact that his code might contain overlapping axioms or with the ordering of his instance contexts. But backtracking would apply equally to ordinary instance selection (in the presence of overlapping instances), so it is a much more pervasive change, with substantial consequences for the type inference engine.
GHC adopts Reject if in doubt for now. We can see how painful it is in practice, and try something more ambitious if necessary.
6.10.3.6. Instance lookup¶
In the light of the overlap decision, instance lookup works like this when
trying to solve a class constraint C t
 First see if there is a given unquantified constraint
C t
. If so, use it to solve the constraint.  If not, look at all the available given quantified constraints; if exactly one matches
C t
, choose it; if more than one matches, report an error.  If no quantified constraints match, look up in the global instances, as described in Instance declarations and resolution and Overlapping instances.
6.10.3.7. Termination¶
GHC uses the Paterson Conditions to ensure that instance resolution terminates. How are those rules modified for quantified constraints? In two ways.
 Each quantified constraint, taken by itself, must satisfy the termination rules for an instance declaration.
 After “for each class constraint
(C t1 ... tn)
”, add “or each quantified constraint(forall as. context => C t1 .. tn)
“
Note that the second item only at the head of the quantified constraint, not its context. Reason: the head is the new goal that has to be solved if we use the instance declaration.
Of course, UndecidableInstances
lifts the Paterson Conditions, as now.
6.10.3.8. Coherence¶
Although quantified constraints are a little like local instance declarations, they differ in one big way: the local instances are written by the compiler, not the user, and hence cannot introduce incoherence. Consider
f :: (forall a. Eq a => Eq (f a)) => f b > f Bool
f x = ...rhs...
In ...rhs...
there is, in effect a local instance for Eq (f a)
for any a
. But
at a call site for f
the compiler itself produces evidence to pass to f
. For example,
if we called f Nothing
, then f
is Maybe
and the compiler must prove (at the
call site) that forall a. Eq a => Eq (Maybe a)
holds. It can do this easily, by
appealing to the existing instance declaration for Eq (Maybe a)
.
In short, quantified constraints do not introduce incoherence.