This section is a quick-reference for GHC's command-line flags. For each flag, we also list its static/dynamic status (see Section 4.2, “Static, Dynamic, and Mode options”), and the flag's opposite (if available).
Section 4.5, “Help and verbosity options”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-? | help | mode | - |
-help | help | mode | - |
-n | do a dry run | dynamic | - |
-v | verbose mode (equivalent to -v3) | dynamic | - |
-vn | set verbosity level | dynamic | - |
-V | display GHC version | mode | - |
––supported-languages | display the supported language extensions | mode | - |
––info | display information about the compiler | mode | - |
––version | display GHC version | mode | - |
––numeric-version | display GHC version (numeric only) | mode | - |
––print-libdir | display GHC library directory | mode | - |
-ferror-spans | output full span in error messages | static | - |
-Hsize | Set the minimum heap size to size | static | - |
-Rghc-timing | Summarise timing stats for GHC (same as +RTS -tstderr) | static | - |
Section 4.4.3, “Batch compiler mode”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-E | Stop after preprocessing (.hspp file) | mode | - |
-C | Stop after generating C (.hc file) | mode | - |
-S | Stop after generating assembly (.s file) | mode | - |
-c | Do not link | dynamic | - |
-x suffix | Override default behaviour for source files | static | - |
Section 4.4, “Modes of operation”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
--interactive | Interactive mode - normally used by just running ghci; see Chapter 2, Using GHCi for details. | mode | - |
--make | Build a multi-module Haskell program, automatically figuring out dependencies. Likely to be much easier, and faster, than using make;
see Section 4.4.1, “Using ghc ––make” for details.. | mode | - |
-e | Evaluate expr;
see Section 4.4.2, “Expression evaluation mode” for details. | mode | - |
-M | Generate dependency information suitable for use in a Makefile;
see Section 4.6.11, “Dependency generation” for details. | mode | - |
Section 4.6.4, “Redirecting the compilation output(s)”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-hcsuf suffix | set the suffix to use for intermediate C files | dynamic | - |
-hidir dir | set directory for interface files | dynamic | - |
-hisuf suffix | set the suffix to use for interface files | dynamic | - |
-o filename | set output filename | dynamic | - |
-odir dir | set directory for object files | dynamic | - |
-ohi filename | set the filename in which to put the interface | dynamic | |
-osuf suffix | set the output file suffix | dynamic | - |
-stubdir dir | redirect FFi stub files | dynamic | - |
-outputdir dir | set output directory | dynamic | - |
Section 4.6.5, “Keeping Intermediate Files”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-keep-hc-file or
-keep-hc-files | retain intermediate .hc files | dynamic | - |
-keep-s-file or
-keep-s-files | retain intermediate .s files | dynamic | - |
-keep-raw-s-file or
-keep-raw-s-files | retain intermediate .raw_s files | dynamic | - |
-keep-tmp-files | retain all intermediate temporary files | dynamic | - |
Section 4.6.6, “Redirecting temporary files”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-tmpdir | set the directory for temporary files | dynamic | - |
Section 4.6.3, “The search path”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-idir1:dir2:... | add dir,
dir2, etc. to import path | static/:set | - |
-i | Empty the import directory list | static/:set | - |
Section 4.6.7, “Other options related to interface files”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-ddump-hi | Dump the new interface to stdout | dynamic | - |
-ddump-hi-diffs | Show the differences vs. the old interface | dynamic | - |
-ddump-minimal-imports | Dump a minimal set of imports | dynamic | - |
--show-iface file | See Section 4.4, “Modes of operation”. |
Section 4.6.8, “The recompilation checker”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fforce-recomp | Turn off recompilation checking; implied by any
-ddump-X option | dynamic | -fno-force-recomp |
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-ignore-dot-ghci | Disable reading of .ghci files | static | - |
-read-dot-ghci | Enable reading of .ghci files | static | - |
-fbreak-on-exception | Break on any exception thrown | dynamic | -fno-break-on-exception |
-fbreak-on-error | Break on uncaught exceptions and errors | dynamic | -fno-break-on-error |
-fprint-evld-with-show | Enable usage of Show instances in :print | dynamic | -fno-print-evld-with-show |
-fprint-bind-result | Turn on printing of binding results in GHCi | dynamic | -fno-print-bind-result |
-fno-print-bind-contents | Turn off printing of binding contents in GHCi | dynamic | - |
-fno-implicit-import-qualified | Turn off implicit qualified import of everything in GHCi | dynamic | - |
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-package-name P | Compile to be part of package P | dynamic | - |
-package P | Expose package P | static/:set | - |
-hide-all-packages | Hide all packages by default | static | - |
-hide-package name | Hide package P | static/:set | - |
-ignore-package name | Ignore package P | static/:set | - |
-package-conf file | Load more packages from file | static | - |
-no-user-package-conf | Don't load the user's package config file. | static | - |
Section 7.1, “Language options”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fglasgow-exts | Enable most language extensions | dynamic | -fno-glasgow-exts |
-XOverlappingInstances | Enable overlapping instances | dynamic | -XNoOverlappingInstances |
-XIncoherentInstances | Enable incoherent instances.
Implies -XOverlappingInstances | dynamic | -XNoIncoherentInstances |
-XUndecidableInstances | Enable undecidable instances | dynamic | -XNoUndecidableInstances |
-fcontext-stack=Nn | set the limit for context reduction. Default is 20. | dynamic | |
-XArrows | Enable arrow notation extension | dynamic | -XNoArrows |
-XDisambiguateRecordFields | Enable record field disambiguation | dynamic | -XNoDisambiguateRecordFields |
-XForeignFunctionInterface | Enable foreign function interface (implied by
-fglasgow-exts) | dynamic | -XNoForeignFunctionInterface |
-XGenerics | Enable generic classes | dynamic | -XNoGenerics |
-XImplicitParams | Enable Implicit Parameters.
Implied by -fglasgow-exts. | dynamic | -XNoImplicitParams |
-firrefutable-tuples | Make tuple pattern matching irrefutable | dynamic | -fno-irrefutable-tuples |
-XNoImplicitPrelude | Don't implicitly import Prelude | dynamic | -XImplicitPrelude |
-XNoMonomorphismRestriction | Disable the monomorphism restriction | dynamic | -XMonomorphismRrestriction |
-XNoMonoPatBinds | Make pattern bindings polymorphic | dynamic | -XMonoPatBinds |
-XRelaxedPolyRec | Relaxed checking for mutually-recursive polymorphic functions | dynamic | -XNoRelaxedPolyRec |
-XExtendedDefaultRules | Use GHCi's extended default rules in a normal module | dynamic | -XNoExtendedDefaultRules |
-XOverloadedStrings | Enable overloaded string literals. | dynamic | -XNoOverloadedStrings |
-XGADTs | Enable generalised algebraic data types. | dynamic | -XNoGADTs |
-XTypeFamilies | Enable type families. | dynamic | -XNoTypeFamilies |
-XScopedTypeVariables | Enable lexically-scoped type variables.
Implied by -fglasgow-exts. | dynamic | -XNoScopedTypeVariables |
-XTemplateHaskell | Enable Template Haskell.
No longer implied by -fglasgow-exts. | dynamic | -XNoTemplateHaskell |
-XQuasiQuotes | Enable quasiquotation. | dynamic | -XNoQuasiQuotes |
-XBangPatterns | Enable bang patterns. | dynamic | -XNoBangPatterns |
-XCPP | Enable the C preprocessor. | dynamic | -XNoCPP |
-XPatternGuards | Enable pattern guards. | dynamic | -XNoPatternGuards |
-XViewPatterns | Enable view patterns. | dynamic | -XNoViewPatterns |
-XUnicodeSyntax | Enable unicode syntax. | dynamic | -XNoUnicodeSyntax |
-XMagicHash | Allow "#" as a postfix modifier on identifiers. | dynamic | -XNoMagicHash |
-XNewQualifiedOperators | Enable new qualified operator syntax | dynamic | -XNoNewQualifiedOperators |
-XPolymorphicComponents | Enable polymorphic components for data constructors. | dynamic | -XNoPolymorphicComponents |
-XRank2Types | Enable rank-2 types. | dynamic | -XNoRank2Types |
-XRankNTypes | Enable rank-N types. | dynamic | -XNoRankNTypes |
-XImpredicativeTypes | Enable impredicative types. | dynamic | -XNoImpredicativeTypes |
-XExistentialQuantification | Enable existential quantification. | dynamic | -XNoExistentialQuantification |
-XKindSignatures | Enable kind signatures. | dynamic | -XNoKindSignatures |
-XEmptyDataDecls | Enable empty data declarations. | dynamic | -XNoEmptyDataDecls |
-XParallelListComp | Enable parallel list comprehensions. | dynamic | -XNoParallelListComp |
-XTransformListComp | Enable transform list comprehensions. | dynamic | -XNoTransformListComp |
-XUnliftedFFITypes | Enable unlifted FFI types. | dynamic | -XNoUnliftedFFITypes |
-XLiberalTypeSynonyms | Enable liberalised type synonyms. | dynamic | -XNoLiberalTypeSynonyms |
-XTypeOperators | Enable type operators. | dynamic | -XNoTypeOperators |
-XRecursiveDo | Enable recursive do (mdo) notation. | dynamic | -XNoRecursiveDo |
-XPArr | Enable parallel arrays. | dynamic | -XNoPArr |
-XRecordWildCards | Enable record wildcards. | dynamic | -XNoRecordWildCards |
-XNamedFieldPuns | Enable record puns. | dynamic | -XNoNamedFieldPuns |
-XDisambiguateRecordFields | Enable record field disambiguation. | dynamic | -XNoDisambiguateRecordFields |
-XUnboxedTuples | Enable unboxed tuples. | dynamic | -XNoUnboxedTuples |
-XStandaloneDeriving | Enable standalone deriving. | dynamic | -XNoStandaloneDeriving |
-XDeriveDataTypeable | Enable deriving for the Data and Typeable classes. | dynamic | -XNoDeriveDataTypeable |
-XGeneralizedNewtypeDeriving | Enable newtype deriving. | dynamic | -XNoGeneralizedNewtypeDeriving |
-XTypeSynonymInstances | Enable type synonyms. | dynamic | -XNoTypeSynonymInstances |
-XFlexibleContexts | Enable flexible contexts. | dynamic | -XNoFlexibleContexts |
-XFlexibleInstances | Enable flexible instances. | dynamic | -XNoFlexibleInstances |
-XConstrainedClassMethods | Enable constrained class methods. | dynamic | -XNoConstrainedClassMethods |
-XMultiParamTypeClasses | Enable multi parameter type classes. | dynamic | -XNoMultiParamTypeClasses |
-XFunctionalDependencies | Enable functional dependencies. | dynamic | -XNoFunctionalDependencies |
-XPackageImports | Enable package-qualified imports. | dynamic | -XNoPackageImports |
Section 4.7, “Warnings and sanity-checking”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-W | enable normal warnings | dynamic | -w |
-w | disable all warnings | dynamic | - |
-Wall | enable almost all warnings (details in Section 4.7, “Warnings and sanity-checking”) | dynamic | -w |
-Werror | make warnings fatal | dynamic | -Wwarn |
-Wwarn | make warnings non-fatal | dynamic | -Werror |
-fwarn-unrecognised-pragmas | warn about uses of pragmas that GHC doesn't recognise | dynamic | -fno-warn-unrecognised-pragmas |
-fwarn-warnings-deprecations | warn about uses of functions & types that have warnings or deprecated pragmas | dynamic | -fno-warn-warnings-deprecations |
-fwarn-deprecated-flags | warn about uses of commandline flags that are deprecated | dynamic | -fno-warn-deprecated-flags |
-fwarn-duplicate-exports | warn when an entity is exported multiple times | dynamic | -fno-warn-duplicate-exports |
-fwarn-hi-shadowing | warn when a .hi file in the
current directory shadows a library | dynamic | -fno-warn-hi-shadowing |
-fwarn-implicit-prelude | warn when the Prelude is implicitly imported | dynamic | -fno-warn-implicit-prelude |
-fwarn-incomplete-patterns | warn when a pattern match could fail | dynamic | -fno-warn-incomplete-patterns |
-fwarn-incomplete-record-updates | warn when a record update could fail | dynamic | -fno-warn-incomplete-record-updates |
-fwarn-missing-fields | warn when fields of a record are uninitialised | dynamic | -fno-warn-missing-fields |
-fwarn-missing-methods | warn when class methods are undefined | dynamic | -fno-warn-missing-methods |
-fwarn-missing-signatures | warn about top-level functions without signatures | dynamic | -fno-warn-missing-signatures |
-fwarn-name-shadowing | warn when names are shadowed | dynamic | -fno-warn-name-shadowing |
-fwarn-orphans | warn when the module contains orphan instance declarations or rewrite rules | dynamic | -fno-warn-orphans |
-fwarn-overlapping-patterns | warn about overlapping patterns | dynamic | -fno-warn-overlapping-patterns |
-fwarn-simple-patterns | warn about lambda-patterns that can fail | dynamic | -fno-warn-simple-patterns |
-fwarn-tabs | warn if there are tabs in the source file | dynamic | -fno-warn-tabs |
-fwarn-type-defaults | warn when defaulting happens | dynamic | -fno-warn-type-defaults |
-fwarn-monomorphism-restriction | warn when the Monomorphism Restriction is applied | dynamic | -fno-warn-monomorphism-restriction |
-fwarn-unused-binds | warn about bindings that are unused | dynamic | -fno-warn-unused-binds |
-fwarn-unused-imports | warn about unnecessary imports | dynamic | -fno-warn-unused-imports |
-fwarn-unused-matches | warn about variables in patterns that aren't used | dynamic | -fno-warn-unused-matches |
Section 4.9, “Optimisation (code improvement)”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-O | Enable default optimisation (level 1) | dynamic | -O0 |
-On | Set optimisation level n | dynamic | -O0 |
Section 4.9.2, “-f*: platform-independent flags”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fcase-merge | Enable case-merging. Implied by -O. | dynamic | -fno-case-merge |
-fdicts-strict | Make dictionaries strict | static | -fno-dicts-strict |
-fmethod-sharing | Share specialisations of overloaded functions (default) | dynamic | -fno-method-sharing |
-fdo-eta-reduction | Enable eta-reduction. Implied by -O. | dynamic | -fno-do-eta-reduction |
-fdo-lambda-eta-expansion | Enable lambda eta-reduction | dynamic | -fno-do-lambda-eta-expansion |
-fexcess-precision | Enable excess intermediate precision | dynamic | -fno-excess-precision |
-fignore-asserts | Ignore assertions in the source | dynamic | -fno-ignore-asserts |
-fignore-interface-pragmas | Ignore pragmas in interface files | dynamic | -fno-ignore-interface-pragmas |
-fomit-interface-pragmas | Don't generate interface pragmas | dynamic | -fno-omit-interface-pragmas |
-fmax-worker-args | If a worker has that many arguments, none will be unpacked anymore (default: 10) | static | - |
-fsimplifier-phases | Set the number of phases for the simplifier (default 2).
Ignored with -O0. | dynamic | - |
-fmax-simplifier-iterations | Set the max iterations for the simplifier | dynamic | - |
-fno-state-hack | Turn off the "state hack" whereby any lambda with a real-world state token as argument is considered to be single-entry. Hence OK to inline things inside it. | static | - |
-fcse | Turn on common sub-expression elimination. Implied by -O. | dynamic | -fno-cse |
-ffull-laziness | Turn on full laziness (floating bindings outwards). Implied by -O. | dynamic | -fno-full-laziness |
-frewrite-rules | Switch on all rewrite rules (including rules
generated by automatic specialisation of overloaded functions).
Implied by -O. | dynamic | -fno-rewrite-rules |
-fstrictness | Turn on strictness analysis. Implied by -O. | dynamic | -fno-strictness |
-fspec-constr | Turn on the SpecConstr transformation. Implied by -O2. | dynamic | -fno-spec-constr |
-fspec-constr-threshold=n | Set the size threshold for the SpecConstr transformation to n (default: 200) | static | -fno-spec-constr-threshold |
-fspec-constr-count=n | Set to n (default: 3) the maximum number of
specialisations that will be created for any one function
by the SpecConstr transformation | static | -fno-spec-constr-count |
-fliberate-case | Turn on the liberate-case transformation. Implied by -O2. | dynamic | -fno-liberate-case |
-fstatic-argument-transformation | Turn on the static argument transformation. Implied by -O2. | dynamic | -fno-static-argument-transformation |
-fliberate-case-threshold=n | Set the size threshold for the liberate-case transformation to n (default: 200) | static | -fno-liberate-case-threshold |
-funbox-strict-fields | Flatten strict constructor fields | dynamic | -fno-unbox-strict-fields |
-funfolding-creation-threshold | Tweak unfolding settings | static | -fno-unfolding-creation-threshold |
-funfolding-fun-discount | Tweak unfolding settings | static | -fno-unfolding-fun-discount |
-funfolding-keeness-factor | Tweak unfolding settings | static | -fno-unfolding-keeness-factor |
-funfolding-use-threshold | Tweak unfolding settings | static | -fno-unfolding-use-threshold |
-fno-pre-inlining | Turn off pre-inlining | static | - |
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-auto | Auto-add _scc_s to all
exported functions | static | -no-auto |
-auto-all | Auto-add _scc_s to all
top-level functions | static | -no-auto-all |
-caf-all | Auto-add _scc_s to all CAFs | static | -no-caf-all |
-prof | Turn on profiling | static | - |
-ticky | Turn on ticky-ticky profiling | static | - |
Section 5.6, “Observing Code Coverage”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fhpc | Turn on Haskell program coverage instrumentation | static | - |
-hpcdir dir | Directory to deposit .mix files during compilation (default is .hpc) | dynamic | - |
Section 4.10.4, “Options affecting a Haskell pre-processor”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-F |
Enable the use of a pre-processor
(set with -pgmF)
| dynamic | - |
Section 4.10.3, “Options affecting the C pre-processor”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-cpp | Run the C pre-processor on Haskell source files | dynamic | - |
-Dsymbol[=value] | Define a symbol in the C pre-processor | dynamic | -Usymbol |
-Usymbol | Undefine a symbol in the C pre-processor | dynamic | - |
-Idir | Add dir to the
directory search list for #include files | dynamic | - |
Section 4.10.5, “Options affecting the C compiler (if applicable)”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-#include file | Include file when
compiling the .hc file | dynamic | - |
Section 4.10.6, “Options affecting code generation”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fasm | Use the native code generator | dynamic | -fvia-C |
-fvia-C | Compile via C | dynamic | -fasm |
-fno-code | Omit code generation | dynamic | - |
-fbyte-code | Generate byte-code | dynamic | - |
-fobject-code | Generate object code | dynamic | - |
Section 4.10.7, “Options affecting linking”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fPIC | Generate position-independent code (where available) | static | - |
-dynamic | Use dynamic Haskell libraries (if available) | static | - |
-framework name | On Darwin/MacOS X only, link in the framework name.
This option corresponds to the -framework option for Apple's Linker. | dynamic | - |
-framework-path name | On Darwin/MacOS X only, add dir to the list of
directories searched for frameworks.
This option corresponds to the -F option for Apple's Linker. | dynamic | - |
-llib | Link in library lib | dynamic | - |
-Ldir | Add dir to the list of
directories searched for libraries | dynamic | - |
-main-is | Set main module and function | dynamic | - |
--mk-dll | DLL-creation mode (Windows only) | dynamic | - |
-no-hs-main | Don't assume this program contains main | dynamic | - |
-no-link | Omit linking | dynamic | - |
-split-objs | Split objects (for libraries) | dynamic | - |
-static | Use static Haskell libraries | static | - |
-threaded | Use the threaded runtime | static | - |
-debug | Use the debugging runtime | static | - |
-fno-gen-manifest | Do not generate a manifest file (Windows only) | dynamic | - |
-fno-embed-manifest | Do not embed the manifest in the executable (Windows only) | dynamic | - |
Section 4.10.1, “Replacing the program for one or more phases”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-pgmL cmd | Use cmd as the literate pre-processor | dynamic | - |
-pgmP cmd | Use cmd as the C
pre-processor (with -cpp only) | dynamic | - |
-pgmc cmd | Use cmd as the C compiler | dynamic | - |
-pgmm cmd | Use cmd as the mangler | dynamic | - |
-pgms cmd | Use cmd as the splitter | dynamic | - |
-pgma cmd | Use cmd as the assembler | dynamic | - |
-pgml cmd | Use cmd as the linker | dynamic | - |
-pgmdll cmd | Use cmd as the DLL generator | dynamic | - |
-pgmF cmd | Use cmd as the pre-processor
(with -F only) | dynamic | - |
-pgmwindres cmd | Use cmd as the program for
embedding manifests on Windows. | dynamic | - |
Section 4.10.2, “Forcing options to a particular phase”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-optL option | pass option to the literate pre-processor | dynamic | - |
-optP option | pass option to cpp (with
-cpp only) | dynamic | - |
-optF option | pass option to the
custom pre-processor | dynamic | - |
-optc option | pass option to the C compiler | dynamic | - |
-optm option | pass option to the mangler | dynamic | - |
-opta option | pass option to the assembler | dynamic | - |
-optl option | pass option to the linker | dynamic | - |
-optdll option | pass option to the DLL generator | dynamic | - |
-optwindres option | pass option to windres. | dynamic | - |
Section 4.13, “Platform-specific Flags”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-monly-[432]-regs | (x86 only) give some registers back to the C compiler | dynamic | - |
Section 4.15, “Generating and compiling External Core Files”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fext-core | Generate .hcr external Core files | static | - |
Section 4.16, “Debugging the compiler”
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-dcore-lint | Turn on internal sanity checking | dynamic | - |
-ddump-asm | Dump assembly | dynamic | - |
-ddump-bcos | Dump interpreter byte code | dynamic | - |
-ddump-cmm | Dump C-- output | dynamic | - |
-ddump-cpranal | Dump output from CPR analysis | dynamic | - |
-ddump-cse | Dump CSE output | dynamic | - |
-ddump-deriv | Dump deriving output | dynamic | - |
-ddump-ds | Dump desugarer output | dynamic | - |
-ddump-flatC | Dump “flat” C | dynamic | - |
-ddump-foreign | Dump foreign export stubs | dynamic | - |
-ddump-hpc | Dump after instrumentation for program coverage | dynamic | - |
-ddump-inlinings | Dump inlining info | dynamic | - |
-ddump-occur-anal | Dump occurrence analysis output | dynamic | - |
-ddump-opt-cmm | Dump the results of C-- to C-- optimising passes | dynamic | - |
-ddump-parsed | Dump parse tree | dynamic | - |
-ddump-prep | Dump prepared core | dynamic | - |
-ddump-rn | Dump renamer output | dynamic | - |
-ddump-rules | Dump rules | dynamic | - |
-ddump-simpl | Dump final simplifier output | dynamic | - |
-ddump-simpl-phases | Dump output from each simplifier phase | dynamic | - |
-ddump-simpl-iterations | Dump output from each simplifier iteration | dynamic | - |
-ddump-spec | Dump specialiser output | dynamic | - |
-ddump-splices | Dump TH spliced expressions, and what they evaluate to | dynamic | - |
-ddump-stg | Dump final STG | dynamic | - |
-ddump-stranal | Dump strictness analyser output | dynamic | - |
-ddump-tc | Dump typechecker output | dynamic | - |
-ddump-types | Dump type signatures | dynamic | - |
-ddump-worker-wrapper | Dump worker-wrapper output | dynamic | - |
-ddump-if-trace | Trace interface files | dynamic | - |
-ddump-tc-trace | Trace typechecker | dynamic | - |
-ddump-rn-trace | Trace renamer | dynamic | - |
-ddump-rn-stats | Renamer stats | dynamic | - |
-ddump-simpl-stats | Dump simplifier stats | dynamic | - |
-dno-debug-output | Suppress unsolicited debugging output | static | - |
-dppr-debug | Turn on debug printing (more verbose) | static | - |
-dsuppress-uniques | Suppress the printing of uniques in debug output (easier to use diff. | static | - |
-dppr-noprags | Don't output pragma info in dumps | static | - |
-dppr-user-length | Set the depth for printing expressions in error msgs | static | - |
-dsource-stats | Dump haskell source stats | dynamic | - |
-dcmm-lint | C-- pass sanity checking | dynamic | - |
-dstg-lint | STG pass sanity checking | dynamic | - |
-dstg-stats | Dump STG stats | dynamic | - |
-dverbose-core2core | Show output from each core-to-core pass | dynamic | - |
-dverbose-stg2stg | Show output from each STG-to-STG pass | dynamic | - |
-dshow-passes | Print out each pass name as it happens | dynamic | - |
-dfaststring-stats | Show statistics for fast string usage when finished | dynamic | - |
| Flag | Description | Static/Dynamic | Reverse |
|---|---|---|---|
-fno-hi-version-check | Don't complain about .hi file mismatches | static | - |
-dno-black-holing | Turn off black holing (probably doesn't work) | static | - |
-fhistory-size | Set simplification history size | static | - |
-funregisterised | Unregisterised compilation (use -unreg instead) | static | - |
-fno-asm-mangling | Turn off assembly mangling (use -unreg instead) | dynamic | - |