4.18. Debugging the compiler

HACKER TERRITORY. HACKER TERRITORY. (You were warned.)

4.18.1. Dumping out compiler intermediate structures

-ddump-pass

Make a debugging dump after pass <pass> (may be common enough to need a short form…). You can get all of these at once (lots of output) by using -v5, or most of them with -v4. You can prevent them from clogging up your standard output by passing -ddump-to-file. Some of the most useful ones are:

-ddump-parsed:

parser output

-ddump-rn:

renamer output

-ddump-tc:

typechecker output

-ddump-splices:

Dump Template Haskell expressions that we splice in, and what Haskell code the expression evaluates to.

-ddump-types:

Dump a type signature for each value defined at the top level of the module. The list is sorted alphabetically. Using -dppr-debug dumps a type signature for all the imported and system-defined things as well; useful for debugging the compiler.

-ddump-deriv:

derived instances

-ddump-ds:

desugarer output

-ddump-spec:

output of specialisation pass

-ddump-rules:

dumps all rewrite rules specified in this module; see Section 7.23.7, “Controlling what's going on in rewrite rules”.

-ddump-rule-firings:

dumps the names of all rules that fired in this module

-ddump-rule-rewrites:

dumps detailed information about all rules that fired in this module

-ddump-vect:

dumps the output of the vectoriser.

-ddump-simpl:

simplifier output (Core-to-Core passes)

-ddump-inlinings:

inlining info from the simplifier

-ddump-stranal:

strictness analyser output

-ddump-strsigs:

strictness signatures

-ddump-cse:

CSE pass output

-ddump-worker-wrapper:

worker/wrapper split output

-ddump-occur-anal:

`occurrence analysis' output

-ddump-prep:

output of core preparation pass

-ddump-stg:

output of STG-to-STG passes

-ddump-cmm:

Print the C-- code out.

-ddump-opt-cmm:

Dump the results of C-- to C-- optimising passes.

-ddump-asm:

assembly language from the native code generator

-ddump-llvm:

LLVM code from the LLVM code generator

-ddump-bcos:

byte code compiler output

-ddump-foreign:

dump foreign export stubs

-ddump-simpl-iterations:

Show the output of each iteration of the simplifier (each run of the simplifier has a maximum number of iterations, normally 4). This outputs even more information than -ddump-simpl-phases.

-ddump-simpl-stats

Dump statistics about how many of each kind of transformation too place. If you add -dppr-debug you get more detailed information.

-ddump-if-trace

Make the interface loader be *real* chatty about what it is up to.

-ddump-tc-trace

Make the type checker be *real* chatty about what it is up to.

-ddump-vt-trace

Make the vectoriser be *real* chatty about what it is up to.

-ddump-rn-trace

Make the renamer be *real* chatty about what it is up to.

-ddump-rn-stats

Print out summary of what kind of information the renamer had to bring in.

-dverbose-core2core , -dverbose-stg2stg

Show the output of the intermediate Core-to-Core and STG-to-STG passes, respectively. (Lots of output!) So: when we're really desperate:

% ghc -noC -O -ddump-simpl -dverbose-core2core -dcore-lint Foo.hs
-dshow-passes

Print out each pass name as it happens.

-ddump-core-stats

Print a one-line summary of the size of the Core program at the end of the optimisation pipeline.

-dfaststring-stats

Show statistics for the usage of fast strings by the compiler.

-dppr-debug

Debugging output is in one of several “styles.” Take the printing of types, for example. In the “user” style (the default), the compiler's internal ideas about types are presented in Haskell source-level syntax, insofar as possible. In the “debug” style (which is the default for debugging output), the types are printed in with explicit foralls, and variables have their unique-id attached (so you can check for things that look the same but aren't). This flag makes debugging output appear in the more verbose debug style.

4.18.2. Formatting dumps

-dppr-user-length

In error messages, expressions are printed to a certain “depth”, with subexpressions beyond the depth replaced by ellipses. This flag sets the depth. Its default value is 5.

-dppr-colsNNN

Set the width of debugging output. Use this if your code is wrapping too much. For example: -dppr-cols200.

-dppr-case-as-let

Print single alternative case expressions as though they were strict let expressions. This is helpful when your code does a lot of unboxing.

-dno-debug-output

Suppress any unsolicited debugging output. When GHC has been built with the DEBUG option it occasionally emits debug output of interest to developers. The extra output can confuse the testing framework and cause bogus test failures, so this flag is provided to turn it off.

4.18.3. Suppressing unwanted information

Core dumps contain a large amount of information. Depending on what you are doing, not all of it will be useful. Use these flags to suppress the parts that you are not interested in.
-dsuppress-all

Suppress everything that can be suppressed, except for unique ids as this often makes the printout ambiguous. If you just want to see the overall structure of the code, then start here.

-dsuppress-uniques

Suppress the printing of uniques. This may make the printout ambiguous (e.g. unclear where an occurrence of 'x' is bound), but it makes the output of two compiler runs have many fewer gratuitous differences, so you can realistically apply diff. Once diff has shown you where to look, you can try again without -dsuppress-uniques

-dsuppress-idinfo

Suppress extended information about identifiers where they are bound. This includes strictness information and inliner templates. Using this flag can cut the size of the core dump in half, due to the lack of inliner templates

-dsuppress-module-prefixes

Suppress the printing of module qualification prefixes. This is the Data.List in Data.List.length.

-dsuppress-type-signatures

Suppress the printing of type signatures.

-dsuppress-type-applications

Suppress the printing of type applications.

-dsuppress-coercions

Suppress the printing of type coercions.

4.18.4. Checking for consistency

-dcore-lint

Turn on heavyweight intra-pass sanity-checking within GHC, at Core level. (It checks GHC's sanity, not yours.)

-dstg-lint:

Ditto for STG level. (NOTE: currently doesn't work).

-dcmm-lint:

Ditto for C-- level.

4.18.5. How to read Core syntax (from some -ddump flags)

Let's do this by commenting an example. It's from doing -ddump-ds on this code:

skip2 m = m : skip2 (m+2)

Before we jump in, a word about names of things. Within GHC, variables, type constructors, etc., are identified by their “Uniques.” These are of the form `letter' plus `number' (both loosely interpreted). The `letter' gives some idea of where the Unique came from; e.g., _ means “built-in type variable”; t means “from the typechecker”; s means “from the simplifier”; and so on. The `number' is printed fairly compactly in a `base-62' format, which everyone hates except me (WDP).

Remember, everything has a “Unique” and it is usually printed out when debugging, in some form or another. So here we go…

Desugared:
Main.skip2{-r1L6-} :: _forall_ a$_4 =>{{Num a$_4}} -> a$_4 -> [a$_4]

--# `r1L6' is the Unique for Main.skip2;
--# `_4' is the Unique for the type-variable (template) `a'
--# `{{Num a$_4}}' is a dictionary argument

_NI_

--# `_NI_' means "no (pragmatic) information" yet; it will later
--# evolve into the GHC_PRAGMA info that goes into interface files.

Main.skip2{-r1L6-} =
    /\ _4 -> \ d.Num.t4Gt ->
        let {
          {- CoRec -}
          +.t4Hg :: _4 -> _4 -> _4
          _NI_
          +.t4Hg = (+{-r3JH-} _4) d.Num.t4Gt

          fromInt.t4GS :: Int{-2i-} -> _4
          _NI_
          fromInt.t4GS = (fromInt{-r3JX-} _4) d.Num.t4Gt

--# The `+' class method (Unique: r3JH) selects the addition code
--# from a `Num' dictionary (now an explicit lambda'd argument).
--# Because Core is 2nd-order lambda-calculus, type applications
--# and lambdas (/\) are explicit.  So `+' is first applied to a
--# type (`_4'), then to a dictionary, yielding the actual addition
--# function that we will use subsequently...

--# We play the exact same game with the (non-standard) class method
--# `fromInt'.  Unsurprisingly, the type `Int' is wired into the
--# compiler.

          lit.t4Hb :: _4
          _NI_
          lit.t4Hb =
              let {
                ds.d4Qz :: Int{-2i-}
                _NI_
                ds.d4Qz = I#! 2#
              } in  fromInt.t4GS ds.d4Qz

--# `I# 2#' is just the literal Int `2'; it reflects the fact that
--# GHC defines `data Int = I# Int#', where Int# is the primitive
--# unboxed type.  (see relevant info about unboxed types elsewhere...)

--# The `!' after `I#' indicates that this is a *saturated*
--# application of the `I#' data constructor (i.e., not partially
--# applied).

          skip2.t3Ja :: _4 -> [_4]
          _NI_
          skip2.t3Ja =
              \ m.r1H4 ->
                  let { ds.d4QQ :: [_4]
                        _NI_
                        ds.d4QQ =
                    let {
                      ds.d4QY :: _4
                      _NI_
                      ds.d4QY = +.t4Hg m.r1H4 lit.t4Hb
                    } in  skip2.t3Ja ds.d4QY
                  } in
                  :! _4 m.r1H4 ds.d4QQ

          {- end CoRec -}
        } in  skip2.t3Ja

(“It's just a simple functional language” is an unregisterised trademark of Peyton Jones Enterprises, plc.)