% % (c) The University of Glasgow 2006 % (c) The GRASP/AQUA Project, Glasgow University, 1992-1998 % \section[CgStackery]{Stack management functions} Stack-twiddling operations, which are pretty low-down and grimy. (This is the module that knows all about stack layouts, etc.) \begin{code}
module CgStackery (
	spRel, getVirtSp, getRealSp, setRealSp,
	setRealAndVirtualSp, getSpRelOffset,

	allocPrimStack, allocStackTop, deAllocStackTop,
	adjustStackHW, getFinalStackHW, 
	setStackFrame, getStackFrame,
	mkVirtStkOffsets, mkStkAmodes,
	freeStackSlots, 
	pushUpdateFrame, pushBHUpdateFrame, emitPushUpdateFrame,
    ) where

#include "HsVersions.h"

import CgMonad
import CgUtils
import CgProf
import SMRep
import OldCmm
import OldCmmUtils
import CLabel
import Constants
import Util
import OrdList
import Outputable

import Control.Monad
\end{code} %************************************************************************ %* * \subsection[CgUsages-stackery]{Monad things for fiddling with stack usage} %* * %************************************************************************ spRel is a little function that abstracts the stack direction. Note that most of the code generator is dependent on the stack direction anyway, so changing this on its own spells certain doom. ToDo: remove? THIS IS DIRECTION SENSITIVE! Stack grows down, positive virtual offsets correspond to negative additions to the stack pointer. \begin{code}
spRel :: VirtualSpOffset 	-- virtual offset of Sp
      -> VirtualSpOffset 	-- virtual offset of The Thing
      -> WordOff		-- integer offset
spRel sp off = sp - off
\end{code} @setRealAndVirtualSp@ sets into the environment the offsets of the current position of the real and virtual stack pointers in the current stack frame. The high-water mark is set too. It generates no code. It is used to initialise things at the beginning of a closure body. \begin{code}
setRealAndVirtualSp :: VirtualSpOffset 	-- New real Sp
		     -> Code

setRealAndVirtualSp new_sp 
  = do	{ stk_usg <- getStkUsage
	; setStkUsage (stk_usg {virtSp = new_sp, 
				realSp = new_sp, 
				hwSp   = new_sp}) }

getVirtSp :: FCode VirtualSpOffset
getVirtSp
  = do	{ stk_usg <- getStkUsage
	; return (virtSp stk_usg) }

getRealSp :: FCode VirtualSpOffset
getRealSp
  = do	{ stk_usg <- getStkUsage
	; return (realSp stk_usg) }

setRealSp :: VirtualSpOffset -> Code
setRealSp new_real_sp
  = do	{ stk_usg <- getStkUsage
	; setStkUsage (stk_usg {realSp = new_real_sp}) }

getSpRelOffset :: VirtualSpOffset -> FCode CmmExpr
getSpRelOffset virtual_offset
  = do	{ real_sp <- getRealSp
	; return (cmmRegOffW spReg (spRel real_sp virtual_offset)) }
\end{code} %************************************************************************ %* * \subsection[CgStackery-layout]{Laying out a stack frame} %* * %************************************************************************ 'mkVirtStkOffsets' is given a list of arguments. The first argument gets the /largest/ virtual stack offset (remember, virtual offsets increase towards the top of stack). \begin{code}
mkVirtStkOffsets
	  :: VirtualSpOffset 	-- Offset of the last allocated thing
	  -> [(CgRep,a)]		-- things to make offsets for
	  -> (VirtualSpOffset,		-- OUTPUTS: Topmost allocated word
	      [(a, VirtualSpOffset)])	-- things with offsets (voids filtered out)

mkVirtStkOffsets init_Sp_offset things
    = loop init_Sp_offset [] (reverse things)
  where
    loop offset offs [] = (offset,offs)
    loop offset offs ((VoidArg,_):things) = loop offset offs things
	-- ignore Void arguments
    loop offset offs ((rep,t):things)
	= loop thing_slot ((t,thing_slot):offs) things
	where
	  thing_slot = offset + cgRepSizeW rep
	    -- offset of thing is offset+size, because we're 
	    -- growing the stack *downwards* as the offsets increase.

-- | 'mkStkAmodes' is a higher-level version of
-- 'mkVirtStkOffsets'.  It starts from the tail-call locations.
-- It returns a single list of addressing modes for the stack
-- locations, and therefore is in the monad.  It /doesn't/ adjust the
-- high water mark.

mkStkAmodes 
	:: VirtualSpOffset	    -- Tail call positions
	-> [(CgRep,CmmExpr)]	    -- things to make offsets for
	-> FCode (VirtualSpOffset,  -- OUTPUTS: Topmost allocated word
	          CmmStmts)	    -- Assignments to appropriate stk slots

mkStkAmodes tail_Sp things
  = do	{ rSp <- getRealSp
	; let (last_Sp_offset, offsets) = mkVirtStkOffsets tail_Sp things
	      abs_cs = [ CmmStore (cmmRegOffW spReg (spRel rSp offset)) amode
		       | (amode, offset) <- offsets
		       ]
	; returnFC (last_Sp_offset, toOL abs_cs) }
\end{code} %************************************************************************ %* * \subsection[CgStackery-monadery]{Inside-monad functions for stack manipulation} %* * %************************************************************************ Allocate a virtual offset for something. \begin{code}
allocPrimStack :: CgRep -> FCode VirtualSpOffset
allocPrimStack rep
  = do	{ stk_usg <- getStkUsage
	; let free_stk = freeStk stk_usg
	; case find_block free_stk of
	     Nothing -> do 
		{ let push_virt_sp = virtSp stk_usg + size
		; setStkUsage (stk_usg { virtSp = push_virt_sp,
					 hwSp   = hwSp stk_usg `max` push_virt_sp })
						-- Adjust high water mark
		; return push_virt_sp }
	     Just slot -> do
		{ setStkUsage (stk_usg { freeStk = delete_block free_stk slot }) 
		; return slot }
	}
  where
    size :: WordOff
    size = cgRepSizeW rep

	-- Find_block looks for a contiguous chunk of free slots
	-- returning the offset of its topmost word
    find_block :: [VirtualSpOffset] -> Maybe VirtualSpOffset
    find_block [] = Nothing
    find_block (slot:slots)
	| take size (slot:slots) == [slot..top_slot]
	= Just top_slot
	| otherwise
	= find_block slots
	where	-- The stack grows downwards, with increasing virtual offsets.
		-- Therefore, the address of a multi-word object is the *highest*
		-- virtual offset it occupies (top_slot below).
	    top_slot = slot+size-1

    delete_block free_stk slot = [ s | s <- free_stk, 
				       (s<=slot-size) || (s>slot) ]
		      -- Retain slots which are not in the range
		      -- slot-size+1..slot
\end{code} Allocate a chunk ON TOP OF the stack. \begin{code}
allocStackTop :: WordOff -> FCode ()
allocStackTop size
  = do	{ stk_usg <- getStkUsage
	; let push_virt_sp = virtSp stk_usg + size
	; setStkUsage (stk_usg { virtSp = push_virt_sp,
				 hwSp   = hwSp stk_usg `max` push_virt_sp }) }
\end{code} Pop some words from the current top of stack. This is used for de-allocating the return address in a case alternative. \begin{code}
deAllocStackTop :: WordOff -> FCode ()
deAllocStackTop size
  = do	{ stk_usg <- getStkUsage
	; let pop_virt_sp = virtSp stk_usg - size
	; setStkUsage (stk_usg { virtSp = pop_virt_sp }) }
\end{code} \begin{code}
adjustStackHW :: VirtualSpOffset -> Code
adjustStackHW offset
  = do	{ stk_usg <- getStkUsage
	; setStkUsage (stk_usg { hwSp = hwSp stk_usg `max` offset }) }
\end{code} A knot-tying beast. \begin{code}
getFinalStackHW :: (VirtualSpOffset -> Code) -> Code
getFinalStackHW fcode
  = do	{ fixC_ (\hw_sp -> do
		{ fcode hw_sp
		; stk_usg <- getStkUsage
		; return (hwSp stk_usg) })
	; return () }
\end{code} \begin{code}
setStackFrame :: VirtualSpOffset -> Code
setStackFrame offset
  = do	{ stk_usg <- getStkUsage
	; setStkUsage (stk_usg { frameSp = offset }) }

getStackFrame :: FCode VirtualSpOffset
getStackFrame
  = do	{ stk_usg <- getStkUsage
	; return (frameSp stk_usg) }
\end{code} %******************************************************** %* * %* Setting up update frames * %* * %******************************************************** @pushUpdateFrame@ $updatee$ pushes a general update frame which points to $updatee$ as the thing to be updated. It is only used when a thunk has just been entered, so the (real) stack pointers are guaranteed to be nicely aligned with the top of stack. @pushUpdateFrame@ adjusts the virtual and tail stack pointers to reflect the frame pushed. \begin{code}
pushUpdateFrame :: CmmExpr -> Code -> Code
pushUpdateFrame updatee code
  = pushSpecUpdateFrame mkUpdInfoLabel updatee code

pushBHUpdateFrame :: CmmExpr -> Code -> Code
pushBHUpdateFrame updatee code
  = pushSpecUpdateFrame mkBHUpdInfoLabel updatee code

pushSpecUpdateFrame :: CLabel -> CmmExpr -> Code -> Code
pushSpecUpdateFrame lbl updatee code
  = do	{
      when debugIsOn $ do
    	{ EndOfBlockInfo _ sequel <- getEndOfBlockInfo ;
    	; MASSERT(case sequel of { OnStack -> True; _ -> False}) }
	; allocStackTop (fixedHdrSize + 
			   sIZEOF_StgUpdateFrame_NoHdr `quot` wORD_SIZE)
	; vsp <- getVirtSp
	; setStackFrame vsp
	; frame_addr <- getSpRelOffset vsp
		-- The location of the lowest-address
		-- word of the update frame itself

                -- NB. we used to set the Sequel to 'UpdateCode' so
                -- that we could jump directly to the update code if
                -- we know that the next frame on the stack is an
                -- update frame.  However, the RTS can sometimes
                -- change an update frame into something else (see
                -- e.g. Note [upd-black-hole] in rts/sm/Scav.c), so we
                -- no longer make this assumption.
	; setEndOfBlockInfo (EndOfBlockInfo vsp OnStack) $
	    do	{ emitSpecPushUpdateFrame lbl frame_addr updatee
		; code }
	}

emitPushUpdateFrame :: CmmExpr -> CmmExpr -> Code
emitPushUpdateFrame = emitSpecPushUpdateFrame mkUpdInfoLabel

emitSpecPushUpdateFrame :: CLabel -> CmmExpr -> CmmExpr -> Code
emitSpecPushUpdateFrame lbl frame_addr updatee = do
	stmtsC [  -- Set the info word
		  CmmStore frame_addr (mkLblExpr lbl)
		, -- And the updatee
		  CmmStore (cmmOffsetB frame_addr off_updatee) updatee ]
	initUpdFrameProf frame_addr

off_updatee :: ByteOff
off_updatee = fixedHdrSize*wORD_SIZE + oFFSET_StgUpdateFrame_updatee
\end{code} %************************************************************************ %* * \subsection[CgStackery-free]{Free stack slots} %* * %************************************************************************ Explicitly free some stack space. \begin{code}
freeStackSlots :: [VirtualSpOffset] -> Code
freeStackSlots extra_free
  = do	{ stk_usg <- getStkUsage
	; let all_free = addFreeSlots (freeStk stk_usg) (sortLe (<=) extra_free)
	; let (new_vsp, new_free) = trim (virtSp stk_usg) all_free
	; setStkUsage (stk_usg { virtSp = new_vsp, freeStk = new_free }) }

addFreeSlots :: [VirtualSpOffset] -> [VirtualSpOffset] -> [VirtualSpOffset]
-- Merge the two, assuming both are in increasing order
addFreeSlots cs [] = cs
addFreeSlots [] ns = ns
addFreeSlots (c:cs) (n:ns)
  | c < n     = c : addFreeSlots cs (n:ns)
  | otherwise = n : addFreeSlots (c:cs) ns

trim :: VirtualSpOffset -> [VirtualSpOffset] -> (VirtualSpOffset, [VirtualSpOffset])
-- Try to trim back the virtual stack pointer, where there is a
-- continuous bunch of free slots at the end of the free list
trim vsp [] = (vsp, [])
trim vsp (slot:slots)
  = case trim vsp slots of
      (vsp', []) 
	| vsp' < slot  -> pprTrace "trim: strange" (ppr vsp <+> ppr (slot:slots))
			  (vsp',   [])
	| vsp' == slot -> (vsp'-1, [])
	| otherwise    -> (vsp',   [slot])
      (vsp', slots')   -> (vsp',   slot:slots')
\end{code}