{-# LANGUAGE Trustworthy #-}
{-# LANGUAGE CPP, NoImplicitPrelude #-}

-----------------------------------------------------------------------------
-- |
-- Module      :  System.IO
-- Copyright   :  (c) The University of Glasgow 2001
-- License     :  BSD-style (see the file libraries/base/LICENSE)
-- 
-- Maintainer  :  libraries@haskell.org
-- Stability   :  stable
-- Portability :  portable
--
-- The standard IO library.
--
-----------------------------------------------------------------------------

module System.IO (
    -- * The IO monad

    IO,
    fixIO,

    -- * Files and handles

    FilePath,

    Handle,             -- abstract, instance of: Eq, Show.

    -- | GHC note: a 'Handle' will be automatically closed when the garbage
    -- collector detects that it has become unreferenced by the program.
    -- However, relying on this behaviour is not generally recommended:
    -- the garbage collector is unpredictable.  If possible, use
    -- an explicit 'hClose' to close 'Handle's when they are no longer
    -- required.  GHC does not currently attempt to free up file
    -- descriptors when they have run out, it is your responsibility to
    -- ensure that this doesn't happen.

    -- ** Standard handles

    -- | Three handles are allocated during program initialisation,
    -- and are initially open.

    stdin, stdout, stderr,

    -- * Opening and closing files

    -- ** Opening files

    withFile,
    openFile,
    IOMode(ReadMode,WriteMode,AppendMode,ReadWriteMode),

    -- ** Closing files

    hClose,

    -- ** Special cases

    -- | These functions are also exported by the "Prelude".

    readFile,
    writeFile,
    appendFile,

    -- ** File locking

    -- $locking

    -- * Operations on handles

    -- ** Determining and changing the size of a file

    hFileSize,
    hSetFileSize,

    -- ** Detecting the end of input

    hIsEOF,
    isEOF,

    -- ** Buffering operations

    BufferMode(NoBuffering,LineBuffering,BlockBuffering),
    hSetBuffering,
    hGetBuffering,
    hFlush,

    -- ** Repositioning handles

    hGetPosn,
    hSetPosn,
    HandlePosn,                -- abstract, instance of: Eq, Show.

    hSeek,
    SeekMode(AbsoluteSeek,RelativeSeek,SeekFromEnd),
    hTell,

    -- ** Handle properties

    hIsOpen, hIsClosed,
    hIsReadable, hIsWritable,
    hIsSeekable,

    -- ** Terminal operations (not portable: GHC only)

    hIsTerminalDevice,

    hSetEcho,
    hGetEcho,

    -- ** Showing handle state (not portable: GHC only)

    hShow,

    -- * Text input and output

    -- ** Text input

    hWaitForInput,
    hReady,
    hGetChar,
    hGetLine,
    hLookAhead,
    hGetContents,

    -- ** Text output

    hPutChar,
    hPutStr,
    hPutStrLn,
    hPrint,

    -- ** Special cases for standard input and output

    -- | These functions are also exported by the "Prelude".

    interact,
    putChar,
    putStr,
    putStrLn,
    print,
    getChar,
    getLine,
    getContents,
    readIO,
    readLn,

    -- * Binary input and output

    withBinaryFile,
    openBinaryFile,
    hSetBinaryMode,
    hPutBuf,
    hGetBuf,
    hGetBufSome,
    hPutBufNonBlocking,
    hGetBufNonBlocking,

    -- * Temporary files

    openTempFile,
    openBinaryTempFile,
    openTempFileWithDefaultPermissions,
    openBinaryTempFileWithDefaultPermissions,

    -- * Unicode encoding\/decoding

    -- | A text-mode 'Handle' has an associated 'TextEncoding', which
    -- is used to decode bytes into Unicode characters when reading,
    -- and encode Unicode characters into bytes when writing.
    --
    -- The default 'TextEncoding' is the same as the default encoding
    -- on your system, which is also available as 'localeEncoding'.
    -- (GHC note: on Windows, we currently do not support double-byte
    -- encodings; if the console\'s code page is unsupported, then
    -- 'localeEncoding' will be 'latin1'.)
    --
    -- Encoding and decoding errors are always detected and reported,
    -- except during lazy I/O ('hGetContents', 'getContents', and
    -- 'readFile'), where a decoding error merely results in
    -- termination of the character stream, as with other I/O errors.

    hSetEncoding, 
    hGetEncoding,

    -- ** Unicode encodings
    TextEncoding, 
    latin1,
    utf8, utf8_bom,
    utf16, utf16le, utf16be,
    utf32, utf32le, utf32be, 
    localeEncoding,
    char8,
    mkTextEncoding,

    -- * Newline conversion
    
    -- | In Haskell, a newline is always represented by the character
    -- '\n'.  However, in files and external character streams, a
    -- newline may be represented by another character sequence, such
    -- as '\r\n'.
    --
    -- A text-mode 'Handle' has an associated 'NewlineMode' that
    -- specifies how to transate newline characters.  The
    -- 'NewlineMode' specifies the input and output translation
    -- separately, so that for instance you can translate '\r\n'
    -- to '\n' on input, but leave newlines as '\n' on output.
    --
    -- The default 'NewlineMode' for a 'Handle' is
    -- 'nativeNewlineMode', which does no translation on Unix systems,
    -- but translates '\r\n' to '\n' and back on Windows.
    --
    -- Binary-mode 'Handle's do no newline translation at all.
    --
    hSetNewlineMode, 
    Newline(..), nativeNewline, 
    NewlineMode(..), 
    noNewlineTranslation, universalNewlineMode, nativeNewlineMode,
  ) where

import Control.Exception.Base

import Data.Bits
import Data.List
import Data.Maybe
import Foreign.C.Error
#ifdef mingw32_HOST_OS
import Foreign.C.String
#endif
import Foreign.C.Types
import System.Posix.Internals
import System.Posix.Types

import GHC.Base
import GHC.IO hiding ( bracket, onException )
import GHC.IO.IOMode
import GHC.IO.Handle.FD
import qualified GHC.IO.FD as FD
import GHC.IO.Handle
import GHC.IO.Handle.Text ( hGetBufSome, hPutStrLn )
import GHC.IO.Exception ( userError )
import GHC.IO.Encoding
import GHC.Num
import Text.Read
import GHC.Show
import GHC.MVar

-- -----------------------------------------------------------------------------
-- Standard IO

-- | Write a character to the standard output device
-- (same as 'hPutChar' 'stdout').

putChar         :: Char -> IO ()
putChar c       =  hPutChar stdout c

-- | Write a string to the standard output device
-- (same as 'hPutStr' 'stdout').

putStr          :: String -> IO ()
putStr s        =  hPutStr stdout s

-- | The same as 'putStr', but adds a newline character.

putStrLn        :: String -> IO ()
putStrLn s      =  hPutStrLn stdout s

-- | The 'print' function outputs a value of any printable type to the
-- standard output device.
-- Printable types are those that are instances of class 'Show'; 'print'
-- converts values to strings for output using the 'show' operation and
-- adds a newline.
--
-- For example, a program to print the first 20 integers and their
-- powers of 2 could be written as:
--
-- > main = print ([(n, 2^n) | n <- [0..19]])

print           :: Show a => a -> IO ()
print x         =  putStrLn (show x)

-- | Read a character from the standard input device
-- (same as 'hGetChar' 'stdin').

getChar         :: IO Char
getChar         =  hGetChar stdin

-- | Read a line from the standard input device
-- (same as 'hGetLine' 'stdin').

getLine         :: IO String
getLine         =  hGetLine stdin

-- | The 'getContents' operation returns all user input as a single string,
-- which is read lazily as it is needed
-- (same as 'hGetContents' 'stdin').

getContents     :: IO String
getContents     =  hGetContents stdin

-- | The 'interact' function takes a function of type @String->String@
-- as its argument.  The entire input from the standard input device is
-- passed to this function as its argument, and the resulting string is
-- output on the standard output device.

interact        ::  (String -> String) -> IO ()
interact f      =   do s <- getContents
                       putStr (f s)

-- | The 'readFile' function reads a file and
-- returns the contents of the file as a string.
-- The file is read lazily, on demand, as with 'getContents'.

readFile        :: FilePath -> IO String
readFile name   =  openFile name ReadMode >>= hGetContents

-- | The computation 'writeFile' @file str@ function writes the string @str@,
-- to the file @file@.
writeFile :: FilePath -> String -> IO ()
writeFile f txt = withFile f WriteMode (\ hdl -> hPutStr hdl txt)

-- | The computation 'appendFile' @file str@ function appends the string @str@,
-- to the file @file@.
--
-- Note that 'writeFile' and 'appendFile' write a literal string
-- to a file.  To write a value of any printable type, as with 'print',
-- use the 'show' function to convert the value to a string first.
--
-- > main = appendFile "squares" (show [(x,x*x) | x <- [0,0.1..2]])

appendFile      :: FilePath -> String -> IO ()
appendFile f txt = withFile f AppendMode (\ hdl -> hPutStr hdl txt)

-- | The 'readLn' function combines 'getLine' and 'readIO'.

readLn          :: Read a => IO a
readLn          =  do l <- getLine
                      r <- readIO l
                      return r

-- | The 'readIO' function is similar to 'read' except that it signals
-- parse failure to the 'IO' monad instead of terminating the program.

readIO          :: Read a => String -> IO a
readIO s        =  case (do { (x,t) <- reads s ;
                              ("","") <- lex t ;
                              return x }) of
                        [x]    -> return x
                        []     -> ioError (userError "Prelude.readIO: no parse")
                        _      -> ioError (userError "Prelude.readIO: ambiguous parse")

-- | The Unicode encoding of the current locale
--
-- This is the initial locale encoding: if it has been subsequently changed by
-- 'GHC.IO.Encoding.setLocaleEncoding' this value will not reflect that change.
localeEncoding :: TextEncoding
localeEncoding = initLocaleEncoding

-- | Computation 'hReady' @hdl@ indicates whether at least one item is
-- available for input from handle @hdl@.
-- 
-- This operation may fail with:
--
--  * 'System.IO.Error.isEOFError' if the end of file has been reached.

hReady          :: Handle -> IO Bool
hReady h        =  hWaitForInput h 0

-- | Computation 'hPrint' @hdl t@ writes the string representation of @t@
-- given by the 'shows' function to the file or channel managed by @hdl@
-- and appends a newline.
--
-- This operation may fail with:
--
--  * 'System.IO.Error.isFullError' if the device is full; or
--
--  * 'System.IO.Error.isPermissionError' if another system resource limit would be exceeded.

hPrint          :: Show a => Handle -> a -> IO ()
hPrint hdl      =  hPutStrLn hdl . show

-- | @'withFile' name mode act@ opens a file using 'openFile' and passes
-- the resulting handle to the computation @act@.  The handle will be
-- closed on exit from 'withFile', whether by normal termination or by
-- raising an exception.  If closing the handle raises an exception, then
-- this exception will be raised by 'withFile' rather than any exception
-- raised by 'act'.
withFile :: FilePath -> IOMode -> (Handle -> IO r) -> IO r
withFile name mode = bracket (openFile name mode) hClose

-- | @'withBinaryFile' name mode act@ opens a file using 'openBinaryFile'
-- and passes the resulting handle to the computation @act@.  The handle
-- will be closed on exit from 'withBinaryFile', whether by normal
-- termination or by raising an exception.
withBinaryFile :: FilePath -> IOMode -> (Handle -> IO r) -> IO r
withBinaryFile name mode = bracket (openBinaryFile name mode) hClose

-- ---------------------------------------------------------------------------
-- fixIO

fixIO :: (a -> IO a) -> IO a
fixIO k = do
    m <- newEmptyMVar
    ans <- unsafeInterleaveIO (takeMVar m)
    result <- k ans
    putMVar m result
    return result

-- NOTE: we do our own explicit black holing here, because GHC's lazy
-- blackholing isn't enough.  In an infinite loop, GHC may run the IO
-- computation a few times before it notices the loop, which is wrong.
--
-- NOTE2: the explicit black-holing with an IORef ran into trouble
-- with multiple threads (see #5421), so now we use an MVar.  I'm
-- actually wondering whether we should use readMVar rather than
-- takeMVar, just in case it ends up being executed multiple times,
-- but even then it would have to be masked to protect against async
-- exceptions.  Ugh.  What we really need here is an IVar, or an
-- atomic readMVar, or even STM.  All these seem like overkill.
--
-- See also System.IO.Unsafe.unsafeFixIO.
--

-- | The function creates a temporary file in ReadWrite mode.
-- The created file isn\'t deleted automatically, so you need to delete it manually.
--
-- The file is creates with permissions such that only the current
-- user can read\/write it.
--
-- With some exceptions (see below), the file will be created securely
-- in the sense that an attacker should not be able to cause
-- openTempFile to overwrite another file on the filesystem using your
-- credentials, by putting symbolic links (on Unix) in the place where
-- the temporary file is to be created.  On Unix the @O_CREAT@ and
-- @O_EXCL@ flags are used to prevent this attack, but note that
-- @O_EXCL@ is sometimes not supported on NFS filesystems, so if you
-- rely on this behaviour it is best to use local filesystems only.
--
openTempFile :: FilePath   -- ^ Directory in which to create the file
             -> String     -- ^ File name template. If the template is \"foo.ext\" then
                           -- the created file will be \"fooXXX.ext\" where XXX is some
                           -- random number.
             -> IO (FilePath, Handle)
openTempFile tmp_dir template
    = openTempFile' "openTempFile" tmp_dir template False 0o600

-- | Like 'openTempFile', but opens the file in binary mode. See 'openBinaryFile' for more comments.
openBinaryTempFile :: FilePath -> String -> IO (FilePath, Handle)
openBinaryTempFile tmp_dir template
    = openTempFile' "openBinaryTempFile" tmp_dir template True 0o600

-- | Like 'openTempFile', but uses the default file permissions
openTempFileWithDefaultPermissions :: FilePath -> String
                                   -> IO (FilePath, Handle)
openTempFileWithDefaultPermissions tmp_dir template
    = openTempFile' "openBinaryTempFile" tmp_dir template False 0o666

-- | Like 'openBinaryTempFile', but uses the default file permissions
openBinaryTempFileWithDefaultPermissions :: FilePath -> String
                                         -> IO (FilePath, Handle)
openBinaryTempFileWithDefaultPermissions tmp_dir template
    = openTempFile' "openBinaryTempFile" tmp_dir template True 0o666

openTempFile' :: String -> FilePath -> String -> Bool -> CMode
              -> IO (FilePath, Handle)
openTempFile' loc tmp_dir template binary mode = do
  pid <- c_getpid
  findTempName pid
  where
    -- We split off the last extension, so we can use .foo.ext files
    -- for temporary files (hidden on Unix OSes). Unfortunately we're
    -- below filepath in the hierarchy here.
    (prefix,suffix) =
       case break (== '.') $ reverse template of
         -- First case: template contains no '.'s. Just re-reverse it.
         (rev_suffix, "")       -> (reverse rev_suffix, "")
         -- Second case: template contains at least one '.'. Strip the
         -- dot from the prefix and prepend it to the suffix (if we don't
         -- do this, the unique number will get added after the '.' and
         -- thus be part of the extension, which is wrong.)
         (rev_suffix, '.':rest) -> (reverse rest, '.':reverse rev_suffix)
         -- Otherwise, something is wrong, because (break (== '.')) should
         -- always return a pair with either the empty string or a string
         -- beginning with '.' as the second component.
         _                      -> error "bug in System.IO.openTempFile"

    findTempName x = do
      r <- openNewFile filepath binary mode
      case r of
        FileExists -> findTempName (x + 1)
        OpenNewError errno -> ioError (errnoToIOError loc errno Nothing (Just tmp_dir))
        NewFileCreated fd -> do
          (fD,fd_type) <- FD.mkFD fd ReadWriteMode Nothing{-no stat-}
                               False{-is_socket-}
                               True{-is_nonblock-}

          enc <- getLocaleEncoding
          h <- mkHandleFromFD fD fd_type filepath ReadWriteMode False{-set non-block-} (Just enc)

          return (filepath, h)

      where
        filename        = prefix ++ show x ++ suffix
        filepath        = tmp_dir `combine` filename

        -- XXX bits copied from System.FilePath, since that's not available here
        combine a b
                  | null b = a
                  | null a = b
                  | last a == pathSeparator = a ++ b
                  | otherwise = a ++ [pathSeparator] ++ b

data OpenNewFileResult
  = NewFileCreated CInt
  | FileExists
  | OpenNewError Errno

openNewFile :: FilePath -> Bool -> CMode -> IO OpenNewFileResult
openNewFile filepath binary mode = do
  let oflags1 = rw_flags .|. o_EXCL

      binary_flags
        | binary    = o_BINARY
        | otherwise = 0

      oflags = oflags1 .|. binary_flags
  fd <- withFilePath filepath $ \ f ->
          c_open f oflags mode
  if fd < 0
    then do
      errno <- getErrno
      case errno of
        _ | errno == eEXIST -> return FileExists
#ifdef mingw32_HOST_OS
        -- If c_open throws EACCES on windows, it could mean that filepath is a
        -- directory. In this case, we want to return FileExists so that the
        -- enclosing openTempFile can try again instead of failing outright.
        -- See bug #4968.
        _ | errno == eACCES -> do
          withCString filepath $ \path -> do
            -- There is a race here: the directory might have been moved or
            -- deleted between the c_open call and the next line, but there
            -- doesn't seem to be any direct way to detect that the c_open call
            -- failed because of an existing directory.
            exists <- c_fileExists path
            return $ if exists
              then FileExists
              else OpenNewError errno
#endif
        _ -> return (OpenNewError errno)
    else return (NewFileCreated fd)

#ifdef mingw32_HOST_OS
foreign import ccall "file_exists" c_fileExists :: CString -> IO Bool
#endif

-- XXX Should use filepath library
pathSeparator :: Char
#ifdef mingw32_HOST_OS
pathSeparator = '\\'
#else
pathSeparator = '/'
#endif

-- XXX Copied from GHC.Handle
std_flags, output_flags, rw_flags :: CInt
std_flags    = o_NONBLOCK   .|. o_NOCTTY
output_flags = std_flags    .|. o_CREAT
rw_flags     = output_flags .|. o_RDWR

-- $locking
-- Implementations should enforce as far as possible, at least locally to the
-- Haskell process, multiple-reader single-writer locking on files.
-- That is, /there may either be many handles on the same file which manage input, or just one handle on the file which manages output/.  If any
-- open or semi-closed handle is managing a file for output, no new
-- handle can be allocated for that file.  If any open or semi-closed
-- handle is managing a file for input, new handles can only be allocated
-- if they do not manage output.  Whether two files are the same is
-- implementation-dependent, but they should normally be the same if they
-- have the same absolute path name and neither has been renamed, for
-- example.
--
-- /Warning/: the 'readFile' operation holds a semi-closed handle on
-- the file until the entire contents of the file have been consumed.
-- It follows that an attempt to write to a file (using 'writeFile', for
-- example) that was earlier opened by 'readFile' will usually result in
-- failure with 'System.IO.Error.isAlreadyInUseError'.