{-# LANGUAGE CPP #-}

-----------------------------------------------------------------------------
--
-- Pretty-printing assembly language
--
-- (c) The University of Glasgow 1993-2005
--
-----------------------------------------------------------------------------

{-# OPTIONS_GHC -fno-warn-orphans #-}
module X86.Ppr (
        pprNatCmmDecl,
        pprData,
        pprInstr,
        pprFormat,
        pprImm,
        pprDataItem,
)

where

#include "HsVersions.h"
#include "nativeGen/NCG.h"

import X86.Regs
import X86.Instr
import X86.Cond
import Instruction
import Format
import Reg
import PprBase


import BlockId
import BasicTypes       (Alignment)
import DynFlags
import Cmm              hiding (topInfoTable)
import CLabel
import Unique           ( pprUnique, Uniquable(..) )
import Platform
import FastString
import Outputable

import Data.Word

import Data.Bits

-- -----------------------------------------------------------------------------
-- Printing this stuff out

pprNatCmmDecl :: NatCmmDecl (Alignment, CmmStatics) Instr -> SDoc
pprNatCmmDecl (CmmData section dats) =
  pprSectionAlign section $$ pprDatas dats

pprNatCmmDecl proc@(CmmProc top_info lbl _ (ListGraph blocks)) =
  sdocWithDynFlags $ \dflags ->
  case topInfoTable proc of
    Nothing ->
       case blocks of
         []     -> -- special case for split markers:
           pprLabel lbl
         blocks -> -- special case for code without info table:
           pprSectionAlign (Section Text lbl) $$
           pprLabel lbl $$ -- blocks guaranteed not null, so label needed
           vcat (map (pprBasicBlock top_info) blocks) $$
           (if debugLevel dflags > 0
            then ppr (mkAsmTempEndLabel lbl) <> char ':' else empty) $$
           pprSizeDecl lbl

    Just (Statics info_lbl _) ->
      sdocWithPlatform $ \platform ->
      pprSectionAlign (Section Text info_lbl) $$
      (if platformHasSubsectionsViaSymbols platform
          then ppr (mkDeadStripPreventer info_lbl) <> char ':'
          else empty) $$
      vcat (map (pprBasicBlock top_info) blocks) $$
      -- above: Even the first block gets a label, because with branch-chain
      -- elimination, it might be the target of a goto.
      (if platformHasSubsectionsViaSymbols platform
       then -- See Note [Subsections Via Symbols]
                text "\t.long "
            <+> ppr info_lbl
            <+> char '-'
            <+> ppr (mkDeadStripPreventer info_lbl)
       else empty) $$
      (if debugLevel dflags > 0
       then ppr (mkAsmTempEndLabel info_lbl) <> char ':' else empty) $$
      pprSizeDecl info_lbl

-- | Output the ELF .size directive.
pprSizeDecl :: CLabel -> SDoc
pprSizeDecl lbl
 = sdocWithPlatform $ \platform ->
   if osElfTarget (platformOS platform)
   then text "\t.size" <+> ppr lbl <> ptext (sLit ", .-") <> ppr lbl
   else empty

pprBasicBlock :: BlockEnv CmmStatics -> NatBasicBlock Instr -> SDoc
pprBasicBlock info_env (BasicBlock blockid instrs)
  = sdocWithDynFlags $ \dflags ->
    maybe_infotable $$
    pprLabel asmLbl $$
    vcat (map pprInstr instrs) $$
    (if debugLevel dflags > 0
     then ppr (mkAsmTempEndLabel asmLbl) <> char ':' else empty)
  where
    asmLbl = mkAsmTempLabel (getUnique blockid)
    maybe_infotable = case mapLookup blockid info_env of
       Nothing   -> empty
       Just (Statics info_lbl info) ->
           pprAlignForSection Text $$
           infoTableLoc $$
           vcat (map pprData info) $$
           pprLabel info_lbl
    -- Make sure the info table has the right .loc for the block
    -- coming right after it. See [Note: Info Offset]
    infoTableLoc = case instrs of
      (l@LOCATION{} : _) -> pprInstr l
      _other             -> empty

pprDatas :: (Alignment, CmmStatics) -> SDoc
pprDatas (align, (Statics lbl dats))
 = vcat (pprAlign align : pprLabel lbl : map pprData dats)
 -- TODO: could remove if align == 1

pprData :: CmmStatic -> SDoc
pprData (CmmString str) = pprASCII str

pprData (CmmUninitialised bytes)
 = sdocWithPlatform $ \platform ->
   if platformOS platform == OSDarwin then text ".space " <> int bytes
                                      else text ".skip "  <> int bytes

pprData (CmmStaticLit lit) = pprDataItem lit

pprGloblDecl :: CLabel -> SDoc
pprGloblDecl lbl
  | not (externallyVisibleCLabel lbl) = empty
  | otherwise = text ".globl " <> ppr lbl

pprTypeAndSizeDecl :: CLabel -> SDoc
pprTypeAndSizeDecl lbl
    = sdocWithPlatform $ \platform ->
      if osElfTarget (platformOS platform) && externallyVisibleCLabel lbl
      then text ".type " <> ppr lbl <> ptext (sLit ", @object")
      else empty

pprLabel :: CLabel -> SDoc
pprLabel lbl = pprGloblDecl lbl
            $$ pprTypeAndSizeDecl lbl
            $$ (ppr lbl <> char ':')


pprASCII :: [Word8] -> SDoc
pprASCII str
  = vcat (map do1 str) $$ do1 0
    where
       do1 :: Word8 -> SDoc
       do1 w = text "\t.byte\t" <> int (fromIntegral w)

pprAlign :: Int -> SDoc
pprAlign bytes
        = sdocWithPlatform $ \platform ->
          text ".align " <> int (alignment platform)
  where
        alignment platform = if platformOS platform == OSDarwin
                             then log2 bytes
                             else      bytes

        log2 :: Int -> Int  -- cache the common ones
        log2 1 = 0
        log2 2 = 1
        log2 4 = 2
        log2 8 = 3
        log2 n = 1 + log2 (n `quot` 2)

-- -----------------------------------------------------------------------------
-- pprInstr: print an 'Instr'

instance Outputable Instr where
    ppr instr = pprInstr instr


pprReg :: Format -> Reg -> SDoc
pprReg f r
  = case r of
      RegReal    (RealRegSingle i) ->
          sdocWithPlatform $ \platform ->
          if target32Bit platform then ppr32_reg_no f i
                                  else ppr64_reg_no f i
      RegReal    (RealRegPair _ _) -> panic "X86.Ppr: no reg pairs on this arch"
      RegVirtual (VirtualRegI  u)  -> text "%vI_" <> pprUnique u
      RegVirtual (VirtualRegHi u)  -> text "%vHi_" <> pprUnique u
      RegVirtual (VirtualRegF  u)  -> text "%vF_" <> pprUnique u
      RegVirtual (VirtualRegD  u)  -> text "%vD_" <> pprUnique u
      RegVirtual (VirtualRegSSE  u) -> text "%vSSE_" <> pprUnique u
  where
    ppr32_reg_no :: Format -> Int -> SDoc
    ppr32_reg_no II8   = ppr32_reg_byte
    ppr32_reg_no II16  = ppr32_reg_word
    ppr32_reg_no _     = ppr32_reg_long

    ppr32_reg_byte i = ptext
      (case i of {
         0 -> sLit "%al";     1 -> sLit "%bl";
         2 -> sLit "%cl";     3 -> sLit "%dl";
        _  -> sLit "very naughty I386 byte register"
      })

    ppr32_reg_word i = ptext
      (case i of {
         0 -> sLit "%ax";     1 -> sLit "%bx";
         2 -> sLit "%cx";     3 -> sLit "%dx";
         4 -> sLit "%si";     5 -> sLit "%di";
         6 -> sLit "%bp";     7 -> sLit "%sp";
        _  -> sLit "very naughty I386 word register"
      })

    ppr32_reg_long i = ptext
      (case i of {
         0 -> sLit "%eax";    1 -> sLit "%ebx";
         2 -> sLit "%ecx";    3 -> sLit "%edx";
         4 -> sLit "%esi";    5 -> sLit "%edi";
         6 -> sLit "%ebp";    7 -> sLit "%esp";
         _  -> ppr_reg_float i
      })

    ppr64_reg_no :: Format -> Int -> SDoc
    ppr64_reg_no II8   = ppr64_reg_byte
    ppr64_reg_no II16  = ppr64_reg_word
    ppr64_reg_no II32  = ppr64_reg_long
    ppr64_reg_no _     = ppr64_reg_quad

    ppr64_reg_byte i = ptext
      (case i of {
         0 -> sLit "%al";     1 -> sLit "%bl";
         2 -> sLit "%cl";     3 -> sLit "%dl";
         4 -> sLit "%sil";    5 -> sLit "%dil"; -- new 8-bit regs!
         6 -> sLit "%bpl";    7 -> sLit "%spl";
         8 -> sLit "%r8b";    9  -> sLit "%r9b";
        10 -> sLit "%r10b";   11 -> sLit "%r11b";
        12 -> sLit "%r12b";   13 -> sLit "%r13b";
        14 -> sLit "%r14b";   15 -> sLit "%r15b";
        _  -> sLit "very naughty x86_64 byte register"
      })

    ppr64_reg_word i = ptext
      (case i of {
         0 -> sLit "%ax";     1 -> sLit "%bx";
         2 -> sLit "%cx";     3 -> sLit "%dx";
         4 -> sLit "%si";     5 -> sLit "%di";
         6 -> sLit "%bp";     7 -> sLit "%sp";
         8 -> sLit "%r8w";    9  -> sLit "%r9w";
        10 -> sLit "%r10w";   11 -> sLit "%r11w";
        12 -> sLit "%r12w";   13 -> sLit "%r13w";
        14 -> sLit "%r14w";   15 -> sLit "%r15w";
        _  -> sLit "very naughty x86_64 word register"
      })

    ppr64_reg_long i = ptext
      (case i of {
         0 -> sLit "%eax";    1  -> sLit "%ebx";
         2 -> sLit "%ecx";    3  -> sLit "%edx";
         4 -> sLit "%esi";    5  -> sLit "%edi";
         6 -> sLit "%ebp";    7  -> sLit "%esp";
         8 -> sLit "%r8d";    9  -> sLit "%r9d";
        10 -> sLit "%r10d";   11 -> sLit "%r11d";
        12 -> sLit "%r12d";   13 -> sLit "%r13d";
        14 -> sLit "%r14d";   15 -> sLit "%r15d";
        _  -> sLit "very naughty x86_64 register"
      })

    ppr64_reg_quad i = ptext
      (case i of {
         0 -> sLit "%rax";      1 -> sLit "%rbx";
         2 -> sLit "%rcx";      3 -> sLit "%rdx";
         4 -> sLit "%rsi";      5 -> sLit "%rdi";
         6 -> sLit "%rbp";      7 -> sLit "%rsp";
         8 -> sLit "%r8";       9 -> sLit "%r9";
        10 -> sLit "%r10";    11 -> sLit "%r11";
        12 -> sLit "%r12";    13 -> sLit "%r13";
        14 -> sLit "%r14";    15 -> sLit "%r15";
        _  -> ppr_reg_float i
      })

ppr_reg_float :: Int -> LitString
ppr_reg_float i = case i of
        16 -> sLit "%fake0";  17 -> sLit "%fake1"
        18 -> sLit "%fake2";  19 -> sLit "%fake3"
        20 -> sLit "%fake4";  21 -> sLit "%fake5"
        24 -> sLit "%xmm0";   25 -> sLit "%xmm1"
        26 -> sLit "%xmm2";   27 -> sLit "%xmm3"
        28 -> sLit "%xmm4";   29 -> sLit "%xmm5"
        30 -> sLit "%xmm6";   31 -> sLit "%xmm7"
        32 -> sLit "%xmm8";   33 -> sLit "%xmm9"
        34 -> sLit "%xmm10";  35 -> sLit "%xmm11"
        36 -> sLit "%xmm12";  37 -> sLit "%xmm13"
        38 -> sLit "%xmm14";  39 -> sLit "%xmm15"
        _  -> sLit "very naughty x86 register"

pprFormat :: Format -> SDoc
pprFormat x
 = ptext (case x of
                II8   -> sLit "b"
                II16  -> sLit "w"
                II32  -> sLit "l"
                II64  -> sLit "q"
                FF32  -> sLit "ss"      -- "scalar single-precision float" (SSE2)
                FF64  -> sLit "sd"      -- "scalar double-precision float" (SSE2)
                FF80  -> sLit "t"
                )

pprFormat_x87 :: Format -> SDoc
pprFormat_x87 x
  = ptext $ case x of
                FF32  -> sLit "s"
                FF64  -> sLit "l"
                FF80  -> sLit "t"
                _     -> panic "X86.Ppr.pprFormat_x87"

pprCond :: Cond -> SDoc
pprCond c
 = ptext (case c of {
                GEU     -> sLit "ae";   LU    -> sLit "b";
                EQQ     -> sLit "e";    GTT   -> sLit "g";
                GE      -> sLit "ge";   GU    -> sLit "a";
                LTT     -> sLit "l";    LE    -> sLit "le";
                LEU     -> sLit "be";   NE    -> sLit "ne";
                NEG     -> sLit "s";    POS   -> sLit "ns";
                CARRY   -> sLit "c";   OFLO  -> sLit "o";
                PARITY  -> sLit "p";   NOTPARITY -> sLit "np";
                ALWAYS  -> sLit "mp"})


pprImm :: Imm -> SDoc
pprImm (ImmInt i)     = int i
pprImm (ImmInteger i) = integer i
pprImm (ImmCLbl l)    = ppr l
pprImm (ImmIndex l i) = ppr l <> char '+' <> int i
pprImm (ImmLit s)     = s

pprImm (ImmFloat _)  = text "naughty float immediate"
pprImm (ImmDouble _) = text "naughty double immediate"

pprImm (ImmConstantSum a b) = pprImm a <> char '+' <> pprImm b
pprImm (ImmConstantDiff a b) = pprImm a <> char '-'
                            <> lparen <> pprImm b <> rparen



pprAddr :: AddrMode -> SDoc
pprAddr (ImmAddr imm off)
  = let pp_imm = pprImm imm
    in
    if (off == 0) then
        pp_imm
    else if (off < 0) then
        pp_imm <> int off
    else
        pp_imm <> char '+' <> int off

pprAddr (AddrBaseIndex base index displacement)
  = sdocWithPlatform $ \platform ->
    let
        pp_disp  = ppr_disp displacement
        pp_off p = pp_disp <> char '(' <> p <> char ')'
        pp_reg r = pprReg (archWordFormat (target32Bit platform)) r
    in
    case (base, index) of
      (EABaseNone,  EAIndexNone) -> pp_disp
      (EABaseReg b, EAIndexNone) -> pp_off (pp_reg b)
      (EABaseRip,   EAIndexNone) -> pp_off (text "%rip")
      (EABaseNone,  EAIndex r i) -> pp_off (comma <> pp_reg r <> comma <> int i)
      (EABaseReg b, EAIndex r i) -> pp_off (pp_reg b <> comma <> pp_reg r
                                       <> comma <> int i)
      _                         -> panic "X86.Ppr.pprAddr: no match"

  where
    ppr_disp (ImmInt 0) = empty
    ppr_disp imm        = pprImm imm

-- | Print section header and appropriate alignment for that section.
pprSectionAlign :: Section -> SDoc
pprSectionAlign (Section (OtherSection _) _) =
     panic "X86.Ppr.pprSectionAlign: unknown section"
pprSectionAlign sec@(Section seg _) =
  sdocWithPlatform $ \platform ->
    pprSectionHeader platform sec $$
    pprAlignForSection seg

-- | Print appropriate alignment for the given section type.
pprAlignForSection :: SectionType -> SDoc
pprAlignForSection seg =
  sdocWithPlatform $ \platform ->
    text ".align " <>
    case platformOS platform of
      -- Darwin: alignments are given as shifts.
      OSDarwin
       | target32Bit platform ->
          case seg of
           ReadOnlyData16    -> int 4
           _                 -> int 2
       | otherwise ->
          case seg of
           ReadOnlyData16    -> int 4
           _                 -> int 3
      -- Other: alignments are given as bytes.
      _
       | target32Bit platform ->
          case seg of
           Text              -> text "4,0x90"
           ReadOnlyData16    -> int 16
           _                 -> int 4
       | otherwise ->
          case seg of
           ReadOnlyData16    -> int 16
           _                 -> int 8

pprDataItem :: CmmLit -> SDoc
pprDataItem lit = sdocWithDynFlags $ \dflags -> pprDataItem' dflags lit

pprDataItem' :: DynFlags -> CmmLit -> SDoc
pprDataItem' dflags lit
  = vcat (ppr_item (cmmTypeFormat $ cmmLitType dflags lit) lit)
    where
        platform = targetPlatform dflags
        imm = litToImm lit

        -- These seem to be common:
        ppr_item II8   _ = [text "\t.byte\t" <> pprImm imm]
        ppr_item II16  _ = [text "\t.word\t" <> pprImm imm]
        ppr_item II32  _ = [text "\t.long\t" <> pprImm imm]

        ppr_item FF32  (CmmFloat r _)
           = let bs = floatToBytes (fromRational r)
             in  map (\b -> text "\t.byte\t" <> pprImm (ImmInt b)) bs

        ppr_item FF64 (CmmFloat r _)
           = let bs = doubleToBytes (fromRational r)
             in  map (\b -> text "\t.byte\t" <> pprImm (ImmInt b)) bs

        ppr_item II64 _
            = case platformOS platform of
              OSDarwin
               | target32Bit platform ->
                  case lit of
                  CmmInt x _ ->
                      [text "\t.long\t"
                          <> int (fromIntegral (fromIntegral x :: Word32)),
                       text "\t.long\t"
                          <> int (fromIntegral
                              (fromIntegral (x `shiftR` 32) :: Word32))]
                  _ -> panic "X86.Ppr.ppr_item: no match for II64"
               | otherwise ->
                  [text "\t.quad\t" <> pprImm imm]
              _
               | target32Bit platform ->
                  [text "\t.quad\t" <> pprImm imm]
               | otherwise ->
                  -- x86_64: binutils can't handle the R_X86_64_PC64
                  -- relocation type, which means we can't do
                  -- pc-relative 64-bit addresses. Fortunately we're
                  -- assuming the small memory model, in which all such
                  -- offsets will fit into 32 bits, so we have to stick
                  -- to 32-bit offset fields and modify the RTS
                  -- appropriately
                  --
                  -- See Note [x86-64-relative] in includes/rts/storage/InfoTables.h
                  --
                  case lit of
                  -- A relative relocation:
                  CmmLabelDiffOff _ _ _ ->
                      [text "\t.long\t" <> pprImm imm,
                       text "\t.long\t0"]
                  _ ->
                      [text "\t.quad\t" <> pprImm imm]

        ppr_item _ _
                = panic "X86.Ppr.ppr_item: no match"



pprInstr :: Instr -> SDoc

pprInstr (COMMENT _) = empty -- nuke 'em
{-
pprInstr (COMMENT s) = text "# " <> ftext s
-}

pprInstr (LOCATION file line col _name)
   = text "\t.loc " <> ppr file <+> ppr line <+> ppr col

pprInstr (DELTA d)
   = pprInstr (COMMENT (mkFastString ("\tdelta = " ++ show d)))

pprInstr (NEWBLOCK _)
   = panic "PprMach.pprInstr: NEWBLOCK"

pprInstr (LDATA _ _)
   = panic "PprMach.pprInstr: LDATA"

{-
pprInstr (SPILL reg slot)
   = hcat [
        text "\tSPILL",
        char ' ',
        pprUserReg reg,
        comma,
        text "SLOT" <> parens (int slot)]

pprInstr (RELOAD slot reg)
   = hcat [
        text "\tRELOAD",
        char ' ',
        text "SLOT" <> parens (int slot),
        comma,
        pprUserReg reg]
-}

-- Replace 'mov $0x0,%reg' by 'xor %reg,%reg', which is smaller and cheaper.
-- The code generator catches most of these already, but not all.
pprInstr (MOV format (OpImm (ImmInt 0)) dst@(OpReg _))
  = pprInstr (XOR format' dst dst)
  where format' = case format of
          II64 -> II32          -- 32-bit version is equivalent, and smaller
          _    -> format
pprInstr (MOV format src dst)
  = pprFormatOpOp (sLit "mov") format src dst

pprInstr (CMOV cc format src dst)
  = pprCondOpReg (sLit "cmov") format cc src dst

pprInstr (MOVZxL II32 src dst) = pprFormatOpOp (sLit "mov") II32 src dst
        -- 32-to-64 bit zero extension on x86_64 is accomplished by a simple
        -- movl.  But we represent it as a MOVZxL instruction, because
        -- the reg alloc would tend to throw away a plain reg-to-reg
        -- move, and we still want it to do that.

pprInstr (MOVZxL formats src dst)
  = pprFormatOpOpCoerce (sLit "movz") formats II32 src dst
        -- zero-extension only needs to extend to 32 bits: on x86_64,
        -- the remaining zero-extension to 64 bits is automatic, and the 32-bit
        -- instruction is shorter.

pprInstr (MOVSxL formats src dst)
  = sdocWithPlatform $ \platform ->
    pprFormatOpOpCoerce (sLit "movs") formats (archWordFormat (target32Bit platform)) src dst

-- here we do some patching, since the physical registers are only set late
-- in the code generation.
pprInstr (LEA format (OpAddr (AddrBaseIndex (EABaseReg reg1) (EAIndex reg2 1) (ImmInt 0))) dst@(OpReg reg3))
  | reg1 == reg3
  = pprFormatOpOp (sLit "add") format (OpReg reg2) dst

pprInstr (LEA format (OpAddr (AddrBaseIndex (EABaseReg reg1) (EAIndex reg2 1) (ImmInt 0))) dst@(OpReg reg3))
  | reg2 == reg3
  = pprFormatOpOp (sLit "add") format (OpReg reg1) dst

pprInstr (LEA format (OpAddr (AddrBaseIndex (EABaseReg reg1) EAIndexNone displ)) dst@(OpReg reg3))
  | reg1 == reg3
  = pprInstr (ADD format (OpImm displ) dst)

pprInstr (LEA format src dst) = pprFormatOpOp (sLit "lea") format src dst

pprInstr (ADD format (OpImm (ImmInt (-1))) dst)
  = pprFormatOp (sLit "dec") format dst
pprInstr (ADD format (OpImm (ImmInt 1)) dst)
  = pprFormatOp (sLit "inc") format dst
pprInstr (ADD format src dst) = pprFormatOpOp (sLit "add") format src dst
pprInstr (ADC format src dst) = pprFormatOpOp (sLit "adc") format src dst
pprInstr (SUB format src dst) = pprFormatOpOp (sLit "sub") format src dst
pprInstr (SBB format src dst) = pprFormatOpOp (sLit "sbb") format src dst
pprInstr (IMUL format op1 op2) = pprFormatOpOp (sLit "imul") format op1 op2

pprInstr (ADD_CC format src dst)
  = pprFormatOpOp (sLit "add") format src dst
pprInstr (SUB_CC format src dst)
  = pprFormatOpOp (sLit "sub") format src dst

{- A hack.  The Intel documentation says that "The two and three
   operand forms [of IMUL] may also be used with unsigned operands
   because the lower half of the product is the same regardless if
   (sic) the operands are signed or unsigned.  The CF and OF flags,
   however, cannot be used to determine if the upper half of the
   result is non-zero."  So there.
-}

-- Use a 32-bit instruction when possible as it saves a byte.
-- Notably, extracting the tag bits of a pointer has this form.
-- TODO: we could save a byte in a subsequent CMP instruction too,
-- but need something like a peephole pass for this
pprInstr (AND II64 src@(OpImm (ImmInteger mask)) dst)
  | 0 <= mask && mask < 0xffffffff
    = pprInstr (AND II32 src dst)
pprInstr (AND format src dst) = pprFormatOpOp (sLit "and") format src dst
pprInstr (OR  format src dst) = pprFormatOpOp (sLit "or")  format src dst

pprInstr (XOR FF32 src dst) = pprOpOp (sLit "xorps") FF32 src dst
pprInstr (XOR FF64 src dst) = pprOpOp (sLit "xorpd") FF64 src dst
pprInstr (XOR format src dst) = pprFormatOpOp (sLit "xor")  format src dst

pprInstr (POPCNT format src dst) = pprOpOp (sLit "popcnt") format src (OpReg dst)
pprInstr (BSF format src dst)    = pprOpOp (sLit "bsf")    format src (OpReg dst)
pprInstr (BSR format src dst)    = pprOpOp (sLit "bsr")    format src (OpReg dst)

pprInstr (PREFETCH NTA format src ) = pprFormatOp_ (sLit "prefetchnta") format src
pprInstr (PREFETCH Lvl0 format src) = pprFormatOp_ (sLit "prefetcht0") format src
pprInstr (PREFETCH Lvl1 format src) = pprFormatOp_ (sLit "prefetcht1") format src
pprInstr (PREFETCH Lvl2 format src) = pprFormatOp_ (sLit "prefetcht2") format src

pprInstr (NOT format op) = pprFormatOp (sLit "not") format op
pprInstr (BSWAP format op) = pprFormatOp (sLit "bswap") format (OpReg op)
pprInstr (NEGI format op) = pprFormatOp (sLit "neg") format op

pprInstr (SHL format src dst) = pprShift (sLit "shl") format src dst
pprInstr (SAR format src dst) = pprShift (sLit "sar") format src dst
pprInstr (SHR format src dst) = pprShift (sLit "shr") format src dst

pprInstr (BT  format imm src) = pprFormatImmOp (sLit "bt") format imm src

pprInstr (CMP format src dst)
  | isFloatFormat format =  pprFormatOpOp (sLit "ucomi") format src dst -- SSE2
  | otherwise     =  pprFormatOpOp (sLit "cmp")   format src dst

pprInstr (TEST format src dst) = sdocWithPlatform $ \platform ->
  let format' = case (src,dst) of
        -- Match instructions like 'test $0x3,%esi' or 'test $0x7,%rbx'.
        -- We can replace them by equivalent, but smaller instructions
        -- by reducing the size of the immediate operand as far as possible.
        -- (We could handle masks larger than a single byte too,
        -- but it would complicate the code considerably
        -- and tag checks are by far the most common case.)
        (OpImm (ImmInteger mask), OpReg dstReg)
          | 0 <= mask && mask < 256 -> minSizeOfReg platform dstReg
        _ -> format
  in pprFormatOpOp (sLit "test") format' src dst
  where
    minSizeOfReg platform (RegReal (RealRegSingle i))
      | target32Bit platform && i <= 3        = II8  -- al, bl, cl, dl
      | target32Bit platform && i <= 7        = II16 -- si, di, bp, sp
      | not (target32Bit platform) && i <= 15 = II8  -- al .. r15b
    minSizeOfReg _ _ = format                 -- other

pprInstr (PUSH format op) = pprFormatOp (sLit "push") format op
pprInstr (POP format op) = pprFormatOp (sLit "pop") format op

-- both unused (SDM):
-- pprInstr PUSHA = text "\tpushal"
-- pprInstr POPA = text "\tpopal"

pprInstr NOP = text "\tnop"
pprInstr (CLTD II32) = text "\tcltd"
pprInstr (CLTD II64) = text "\tcqto"

pprInstr (SETCC cond op) = pprCondInstr (sLit "set") cond (pprOperand II8 op)

pprInstr (JXX cond blockid)
  = pprCondInstr (sLit "j") cond (ppr lab)
  where lab = mkAsmTempLabel (getUnique blockid)

pprInstr        (JXX_GBL cond imm) = pprCondInstr (sLit "j") cond (pprImm imm)

pprInstr        (JMP (OpImm imm) _) = text "\tjmp " <> pprImm imm
pprInstr (JMP op _)          = sdocWithPlatform $ \platform ->
                               text "\tjmp *"
                                   <> pprOperand (archWordFormat (target32Bit platform)) op
pprInstr (JMP_TBL op _ _ _)  = pprInstr (JMP op [])
pprInstr        (CALL (Left imm) _)    = text "\tcall " <> pprImm imm
pprInstr (CALL (Right reg) _)   = sdocWithPlatform $ \platform ->
                                  text "\tcall *"
                                      <> pprReg (archWordFormat (target32Bit platform)) reg

pprInstr (IDIV fmt op)   = pprFormatOp (sLit "idiv") fmt op
pprInstr (DIV fmt op)    = pprFormatOp (sLit "div")  fmt op
pprInstr (IMUL2 fmt op)  = pprFormatOp (sLit "imul") fmt op

-- x86_64 only
pprInstr (MUL format op1 op2) = pprFormatOpOp (sLit "mul") format op1 op2
pprInstr (MUL2 format op) = pprFormatOp (sLit "mul") format op

pprInstr (FDIV format op1 op2) = pprFormatOpOp (sLit "div") format op1 op2

pprInstr (CVTSS2SD from to)      = pprRegReg (sLit "cvtss2sd") from to
pprInstr (CVTSD2SS from to)      = pprRegReg (sLit "cvtsd2ss") from to
pprInstr (CVTTSS2SIQ fmt from to) = pprFormatFormatOpReg (sLit "cvttss2si") FF32 fmt from to
pprInstr (CVTTSD2SIQ fmt from to) = pprFormatFormatOpReg (sLit "cvttsd2si") FF64 fmt from to
pprInstr (CVTSI2SS fmt from to)   = pprFormatOpReg (sLit "cvtsi2ss") fmt from to
pprInstr (CVTSI2SD fmt from to)   = pprFormatOpReg (sLit "cvtsi2sd") fmt from to

    -- FETCHGOT for PIC on ELF platforms
pprInstr (FETCHGOT reg)
   = vcat [ text "\tcall 1f",
            hcat [ text "1:\tpopl\t", pprReg II32 reg ],
            hcat [ text "\taddl\t$_GLOBAL_OFFSET_TABLE_+(.-1b), ",
                   pprReg II32 reg ]
          ]

    -- FETCHPC for PIC on Darwin/x86
    -- get the instruction pointer into a register
    -- (Terminology note: the IP is called Program Counter on PPC,
    --  and it's a good thing to use the same name on both platforms)
pprInstr (FETCHPC reg)
   = vcat [ text "\tcall 1f",
            hcat [ text "1:\tpopl\t", pprReg II32 reg ]
          ]


-- -----------------------------------------------------------------------------
-- i386 floating-point

-- Simulating a flat register set on the x86 FP stack is tricky.
-- you have to free %st(7) before pushing anything on the FP reg stack
-- so as to preclude the possibility of a FP stack overflow exception.
pprInstr g@(GMOV src dst)
   | src == dst
   = empty
   | otherwise
   = pprG g (hcat [gtab, gpush src 0, gsemi, gpop dst 1])

-- GLD fmt addr dst ==> FLDsz addr ; FSTP (dst+1)
pprInstr g@(GLD fmt addr dst)
 = pprG g (hcat [gtab, text "fld", pprFormat_x87 fmt, gsp,
                 pprAddr addr, gsemi, gpop dst 1])

-- GST fmt src addr ==> FLD dst ; FSTPsz addr
pprInstr g@(GST fmt src addr)
 | src == fake0 && fmt /= FF80 -- fstt instruction doesn't exist
 = pprG g (hcat [gtab,
                 text "fst", pprFormat_x87 fmt, gsp, pprAddr addr])
 | otherwise
 = pprG g (hcat [gtab, gpush src 0, gsemi,
                 text "fstp", pprFormat_x87 fmt, gsp, pprAddr addr])

pprInstr g@(GLDZ dst)
 = pprG g (hcat [gtab, text "fldz ; ", gpop dst 1])
pprInstr g@(GLD1 dst)
 = pprG g (hcat [gtab, text "fld1 ; ", gpop dst 1])

pprInstr (GFTOI src dst)
   = pprInstr (GDTOI src dst)

pprInstr g@(GDTOI src dst)
   = pprG g (vcat [
         hcat [gtab, text "subl $8, %esp ; fnstcw 4(%esp)"],
         hcat [gtab, gpush src 0],
         hcat [gtab, text "movzwl 4(%esp), ", reg,
                     text " ; orl $0xC00, ", reg],
         hcat [gtab, text "movl ", reg, text ", 0(%esp) ; fldcw 0(%esp)"],
         hcat [gtab, text "fistpl 0(%esp)"],
         hcat [gtab, text "fldcw 4(%esp) ; movl 0(%esp), ", reg],
         hcat [gtab, text "addl $8, %esp"]
     ])
   where
     reg = pprReg II32 dst

pprInstr (GITOF src dst)
   = pprInstr (GITOD src dst)

pprInstr g@(GITOD src dst)
   = pprG g (hcat [gtab, text "pushl ", pprReg II32 src,
                   text " ; fildl (%esp) ; ",
                   gpop dst 1, text " ; addl $4,%esp"])

pprInstr g@(GDTOF src dst)
  = pprG g (vcat [gtab <> gpush src 0,
                  gtab <> text "subl $4,%esp ; fstps (%esp) ; flds (%esp) ; addl $4,%esp ;",
                  gtab <> gpop dst 1])

{- Gruesome swamp follows.  If you're unfortunate enough to have ventured
   this far into the jungle AND you give a Rat's Ass (tm) what's going
   on, here's the deal.  Generate code to do a floating point comparison
   of src1 and src2, of kind cond, and set the Zero flag if true.

   The complications are to do with handling NaNs correctly.  We want the
   property that if either argument is NaN, then the result of the
   comparison is False ... except if we're comparing for inequality,
   in which case the answer is True.

   Here's how the general (non-inequality) case works.  As an
   example, consider generating the an equality test:

     pushl %eax         -- we need to mess with this
     <get src1 to top of FPU stack>
     fcomp <src2 location in FPU stack> and pop pushed src1
                -- Result of comparison is in FPU Status Register bits
                -- C3 C2 and C0
     fstsw %ax  -- Move FPU Status Reg to %ax
     sahf       -- move C3 C2 C0 from %ax to integer flag reg
     -- now the serious magic begins
     setpo %ah     -- %ah = if comparable(neither arg was NaN) then 1 else 0
     sete  %al     -- %al = if arg1 == arg2 then 1 else 0
     andb %ah,%al  -- %al &= %ah
                   -- so %al == 1 iff (comparable && same); else it holds 0
     decb %al      -- %al == 0, ZeroFlag=1  iff (comparable && same);
                      else %al == 0xFF, ZeroFlag=0
     -- the zero flag is now set as we desire.
     popl %eax

   The special case of inequality differs thusly:

     setpe %ah     -- %ah = if incomparable(either arg was NaN) then 1 else 0
     setne %al     -- %al = if arg1 /= arg2 then 1 else 0
     orb %ah,%al   -- %al = if (incomparable || different) then 1 else 0
     decb %al      -- if (incomparable || different) then (%al == 0, ZF=1)
                                                     else (%al == 0xFF, ZF=0)
-}
pprInstr g@(GCMP cond src1 src2)
   | case cond of { NE -> True; _ -> False }
   = pprG g (vcat [
        hcat [gtab, text "pushl %eax ; ",gpush src1 0],
        hcat [gtab, text "fcomp ", greg src2 1,
                    text "; fstsw %ax ; sahf ;  setpe %ah"],
        hcat [gtab, text "setne %al ;  ",
              text "orb %ah,%al ;  decb %al ;  popl %eax"]
    ])
   | otherwise
   = pprG g (vcat [
        hcat [gtab, text "pushl %eax ; ",gpush src1 0],
        hcat [gtab, text "fcomp ", greg src2 1,
                    text "; fstsw %ax ; sahf ;  setpo %ah"],
        hcat [gtab, text "set", pprCond (fix_FP_cond cond), text " %al ;  ",
              text "andb %ah,%al ;  decb %al ;  popl %eax"]
    ])
    where
        {- On the 486, the flags set by FP compare are the unsigned ones!
           (This looks like a HACK to me.  WDP 96/03)
        -}
        fix_FP_cond :: Cond -> Cond
        fix_FP_cond GE   = GEU
        fix_FP_cond GTT  = GU
        fix_FP_cond LTT  = LU
        fix_FP_cond LE   = LEU
        fix_FP_cond EQQ  = EQQ
        fix_FP_cond NE   = NE
        fix_FP_cond _    = panic "X86.Ppr.fix_FP_cond: no match"
        -- there should be no others


pprInstr g@(GABS _ src dst)
   = pprG g (hcat [gtab, gpush src 0, text " ; fabs ; ", gpop dst 1])

pprInstr g@(GNEG _ src dst)
   = pprG g (hcat [gtab, gpush src 0, text " ; fchs ; ", gpop dst 1])

pprInstr g@(GSQRT fmt src dst)
   = pprG g (hcat [gtab, gpush src 0, text " ; fsqrt"] $$
             hcat [gtab, gcoerceto fmt, gpop dst 1])

pprInstr g@(GSIN fmt l1 l2 src dst)
   = pprG g (pprTrigOp "fsin" False l1 l2 src dst fmt)

pprInstr g@(GCOS fmt l1 l2 src dst)
   = pprG g (pprTrigOp "fcos" False l1 l2 src dst fmt)

pprInstr g@(GTAN fmt l1 l2 src dst)
   = pprG g (pprTrigOp "fptan" True l1 l2 src dst fmt)

-- In the translations for GADD, GMUL, GSUB and GDIV,
-- the first two cases are mere optimisations.  The otherwise clause
-- generates correct code under all circumstances.

pprInstr g@(GADD _ src1 src2 dst)
   | src1 == dst
   = pprG g (text "\t#GADD-xxxcase1" $$
             hcat [gtab, gpush src2 0,
                   text " ; faddp %st(0),", greg src1 1])
   | src2 == dst
   = pprG g (text "\t#GADD-xxxcase2" $$
             hcat [gtab, gpush src1 0,
                   text " ; faddp %st(0),", greg src2 1])
   | otherwise
   = pprG g (hcat [gtab, gpush src1 0,
                   text " ; fadd ", greg src2 1, text ",%st(0)",
                   gsemi, gpop dst 1])


pprInstr g@(GMUL _ src1 src2 dst)
   | src1 == dst
   = pprG g (text "\t#GMUL-xxxcase1" $$
             hcat [gtab, gpush src2 0,
                   text " ; fmulp %st(0),", greg src1 1])
   | src2 == dst
   = pprG g (text "\t#GMUL-xxxcase2" $$
             hcat [gtab, gpush src1 0,
                   text " ; fmulp %st(0),", greg src2 1])
   | otherwise
   = pprG g (hcat [gtab, gpush src1 0,
             text " ; fmul ", greg src2 1, text ",%st(0)",
             gsemi, gpop dst 1])


pprInstr g@(GSUB _ src1 src2 dst)
   | src1 == dst
   = pprG g (text "\t#GSUB-xxxcase1" $$
             hcat [gtab, gpush src2 0,
                   text " ; fsubrp %st(0),", greg src1 1])
   | src2 == dst
   = pprG g (text "\t#GSUB-xxxcase2" $$
             hcat [gtab, gpush src1 0,
                   text " ; fsubp %st(0),", greg src2 1])
   | otherwise
   = pprG g (hcat [gtab, gpush src1 0,
                   text " ; fsub ", greg src2 1, text ",%st(0)",
                   gsemi, gpop dst 1])


pprInstr g@(GDIV _ src1 src2 dst)
   | src1 == dst
   = pprG g (text "\t#GDIV-xxxcase1" $$
             hcat [gtab, gpush src2 0,
                   text " ; fdivrp %st(0),", greg src1 1])
   | src2 == dst
   = pprG g (text "\t#GDIV-xxxcase2" $$
             hcat [gtab, gpush src1 0,
                   text " ; fdivp %st(0),", greg src2 1])
   | otherwise
   = pprG g (hcat [gtab, gpush src1 0,
                   text " ; fdiv ", greg src2 1, text ",%st(0)",
                   gsemi, gpop dst 1])


pprInstr GFREE
   = vcat [ text "\tffree %st(0) ;ffree %st(1) ;ffree %st(2) ;ffree %st(3)",
            text "\tffree %st(4) ;ffree %st(5)"
          ]

-- Atomics

pprInstr (LOCK i) = text "\tlock" $$ pprInstr i

pprInstr MFENCE = text "\tmfence"

pprInstr (XADD format src dst) = pprFormatOpOp (sLit "xadd") format src dst

pprInstr (CMPXCHG format src dst)
   = pprFormatOpOp (sLit "cmpxchg") format src dst

pprInstr _
        = panic "X86.Ppr.pprInstr: no match"


pprTrigOp :: String -> Bool -> CLabel -> CLabel
          -> Reg -> Reg -> Format -> SDoc
pprTrigOp op -- fsin, fcos or fptan
          isTan -- we need a couple of extra steps if we're doing tan
          l1 l2 -- internal labels for us to use
          src dst fmt
    = -- We'll be needing %eax later on
      hcat [gtab, text "pushl %eax;"] $$
      -- tan is going to use an extra space on the FP stack
      (if isTan then hcat [gtab, text "ffree %st(6)"] else empty) $$
      -- First put the value in %st(0) and try to apply the op to it
      hcat [gpush src 0, text ("; " ++ op)] $$
      -- Now look to see if C2 was set (overflow, |value| >= 2^63)
      hcat [gtab, text "fnstsw %ax"] $$
      hcat [gtab, text "test   $0x400,%eax"] $$
      -- If we were in bounds then jump to the end
      hcat [gtab, text "je     " <> ppr l1] $$
      -- Otherwise we need to shrink the value. Start by
      -- loading pi, doubleing it (by adding it to itself),
      -- and then swapping pi with the value, so the value we
      -- want to apply op to is in %st(0) again
      hcat [gtab, text "ffree %st(7); fldpi"] $$
      hcat [gtab, text "fadd   %st(0),%st"] $$
      hcat [gtab, text "fxch   %st(1)"] $$
      -- Now we have a loop in which we make the value smaller,
      -- see if it's small enough, and loop if not
      (ppr l2 <> char ':') $$
      hcat [gtab, text "fprem1"] $$
      -- My Debian libc uses fstsw here for the tan code, but I can't
      -- see any reason why it should need to be different for tan.
      hcat [gtab, text "fnstsw %ax"] $$
      hcat [gtab, text "test   $0x400,%eax"] $$
      hcat [gtab, text "jne    " <> ppr l2] $$
      hcat [gtab, text "fstp   %st(1)"] $$
      hcat [gtab, text op] $$
      (ppr l1 <> char ':') $$
      -- Pop the 1.0 tan gave us
      (if isTan then hcat [gtab, text "fstp %st(0)"] else empty) $$
      -- Restore %eax
      hcat [gtab, text "popl %eax;"] $$
      -- And finally make the result the right size
      hcat [gtab, gcoerceto fmt, gpop dst 1]

--------------------------

-- coerce %st(0) to the specified size
gcoerceto :: Format -> SDoc
gcoerceto FF64 = empty
gcoerceto FF32 = empty --text "subl $4,%esp ; fstps (%esp) ; flds (%esp) ; addl $4,%esp ; "
gcoerceto _    = panic "X86.Ppr.gcoerceto: no match"

gpush :: Reg -> RegNo -> SDoc
gpush reg offset
   = hcat [text "fld ", greg reg offset]

gpop :: Reg -> RegNo -> SDoc
gpop reg offset
   = hcat [text "fstp ", greg reg offset]

greg :: Reg -> RegNo -> SDoc
greg reg offset = text "%st(" <> int (gregno reg - firstfake+offset) <> char ')'

gsemi :: SDoc
gsemi = text " ; "

gtab :: SDoc
gtab  = char '\t'

gsp :: SDoc
gsp   = char ' '

gregno :: Reg -> RegNo
gregno (RegReal (RealRegSingle i)) = i
gregno _           = --pprPanic "gregno" (ppr other)
                     999   -- bogus; only needed for debug printing

pprG :: Instr -> SDoc -> SDoc
pprG fake actual
   = (char '#' <> pprGInstr fake) $$ actual


pprGInstr :: Instr -> SDoc
pprGInstr (GMOV src dst)   = pprFormatRegReg (sLit "gmov") FF64 src dst
pprGInstr (GLD fmt src dst) = pprFormatAddrReg (sLit "gld") fmt src dst
pprGInstr (GST fmt src dst) = pprFormatRegAddr (sLit "gst") fmt src dst

pprGInstr (GLDZ dst) = pprFormatReg (sLit "gldz") FF64 dst
pprGInstr (GLD1 dst) = pprFormatReg (sLit "gld1") FF64 dst

pprGInstr (GFTOI src dst) = pprFormatFormatRegReg (sLit "gftoi") FF32 II32 src dst
pprGInstr (GDTOI src dst) = pprFormatFormatRegReg (sLit "gdtoi") FF64 II32 src dst

pprGInstr (GITOF src dst) = pprFormatFormatRegReg (sLit "gitof") II32 FF32 src dst
pprGInstr (GITOD src dst) = pprFormatFormatRegReg (sLit "gitod") II32 FF64 src dst
pprGInstr (GDTOF src dst) = pprFormatFormatRegReg (sLit "gdtof") FF64 FF32 src dst

pprGInstr (GCMP co src dst) = pprCondRegReg (sLit "gcmp_") FF64 co src dst
pprGInstr (GABS fmt src dst) = pprFormatRegReg (sLit "gabs") fmt src dst
pprGInstr (GNEG fmt src dst) = pprFormatRegReg (sLit "gneg") fmt src dst
pprGInstr (GSQRT fmt src dst) = pprFormatRegReg (sLit "gsqrt") fmt src dst
pprGInstr (GSIN fmt _ _ src dst) = pprFormatRegReg (sLit "gsin") fmt src dst
pprGInstr (GCOS fmt _ _ src dst) = pprFormatRegReg (sLit "gcos") fmt src dst
pprGInstr (GTAN fmt _ _ src dst) = pprFormatRegReg (sLit "gtan") fmt src dst

pprGInstr (GADD fmt src1 src2 dst) = pprFormatRegRegReg (sLit "gadd") fmt src1 src2 dst
pprGInstr (GSUB fmt src1 src2 dst) = pprFormatRegRegReg (sLit "gsub") fmt src1 src2 dst
pprGInstr (GMUL fmt src1 src2 dst) = pprFormatRegRegReg (sLit "gmul") fmt src1 src2 dst
pprGInstr (GDIV fmt src1 src2 dst) = pprFormatRegRegReg (sLit "gdiv") fmt src1 src2 dst

pprGInstr _ = panic "X86.Ppr.pprGInstr: no match"

pprDollImm :: Imm -> SDoc
pprDollImm i = text "$" <> pprImm i


pprOperand :: Format -> Operand -> SDoc
pprOperand f (OpReg r)   = pprReg f r
pprOperand _ (OpImm i)   = pprDollImm i
pprOperand _ (OpAddr ea) = pprAddr ea


pprMnemonic_  :: LitString -> SDoc
pprMnemonic_ name =
   char '\t' <> ptext name <> space


pprMnemonic  :: LitString -> Format -> SDoc
pprMnemonic name format =
   char '\t' <> ptext name <> pprFormat format <> space


pprFormatImmOp :: LitString -> Format -> Imm -> Operand -> SDoc
pprFormatImmOp name format imm op1
  = hcat [
        pprMnemonic name format,
        char '$',
        pprImm imm,
        comma,
        pprOperand format op1
    ]


pprFormatOp_ :: LitString -> Format -> Operand -> SDoc
pprFormatOp_ name format op1
  = hcat [
        pprMnemonic_ name ,
        pprOperand format op1
    ]

pprFormatOp :: LitString -> Format -> Operand -> SDoc
pprFormatOp name format op1
  = hcat [
        pprMnemonic name format,
        pprOperand format op1
    ]


pprFormatOpOp :: LitString -> Format -> Operand -> Operand -> SDoc
pprFormatOpOp name format op1 op2
  = hcat [
        pprMnemonic name format,
        pprOperand format op1,
        comma,
        pprOperand format op2
    ]


pprOpOp :: LitString -> Format -> Operand -> Operand -> SDoc
pprOpOp name format op1 op2
  = hcat [
        pprMnemonic_ name,
        pprOperand format op1,
        comma,
        pprOperand format op2
    ]


pprFormatReg :: LitString -> Format -> Reg -> SDoc
pprFormatReg name format reg1
  = hcat [
        pprMnemonic name format,
        pprReg format reg1
    ]


pprFormatRegReg :: LitString -> Format -> Reg -> Reg -> SDoc
pprFormatRegReg name format reg1 reg2
  = hcat [
        pprMnemonic name format,
        pprReg format reg1,
        comma,
        pprReg format reg2
    ]


pprRegReg :: LitString -> Reg -> Reg -> SDoc
pprRegReg name reg1 reg2
  = sdocWithPlatform $ \platform ->
    hcat [
        pprMnemonic_ name,
        pprReg (archWordFormat (target32Bit platform)) reg1,
        comma,
        pprReg (archWordFormat (target32Bit platform)) reg2
    ]


pprFormatOpReg :: LitString -> Format -> Operand -> Reg -> SDoc
pprFormatOpReg name format op1 reg2
  = sdocWithPlatform $ \platform ->
    hcat [
        pprMnemonic name format,
        pprOperand format op1,
        comma,
        pprReg (archWordFormat (target32Bit platform)) reg2
    ]

pprCondOpReg :: LitString -> Format -> Cond -> Operand -> Reg -> SDoc
pprCondOpReg name format cond op1 reg2
  = hcat [
        char '\t',
        ptext name,
        pprCond cond,
        space,
        pprOperand format op1,
        comma,
        pprReg format reg2
    ]

pprCondRegReg :: LitString -> Format -> Cond -> Reg -> Reg -> SDoc
pprCondRegReg name format cond reg1 reg2
  = hcat [
        char '\t',
        ptext name,
        pprCond cond,
        space,
        pprReg format reg1,
        comma,
        pprReg format reg2
    ]

pprFormatFormatRegReg :: LitString -> Format -> Format -> Reg -> Reg -> SDoc
pprFormatFormatRegReg name format1 format2 reg1 reg2
  = hcat [
        char '\t',
        ptext name,
        pprFormat format1,
        pprFormat format2,
        space,
        pprReg format1 reg1,
        comma,
        pprReg format2 reg2
    ]

pprFormatFormatOpReg :: LitString -> Format -> Format -> Operand -> Reg -> SDoc
pprFormatFormatOpReg name format1 format2 op1 reg2
  = hcat [
        pprMnemonic name format2,
        pprOperand format1 op1,
        comma,
        pprReg format2 reg2
    ]

pprFormatRegRegReg :: LitString -> Format -> Reg -> Reg -> Reg -> SDoc
pprFormatRegRegReg name format reg1 reg2 reg3
  = hcat [
        pprMnemonic name format,
        pprReg format reg1,
        comma,
        pprReg format reg2,
        comma,
        pprReg format reg3
    ]


pprFormatAddrReg :: LitString -> Format -> AddrMode -> Reg -> SDoc
pprFormatAddrReg name format op dst
  = hcat [
        pprMnemonic name format,
        pprAddr op,
        comma,
        pprReg format dst
    ]


pprFormatRegAddr :: LitString -> Format -> Reg -> AddrMode -> SDoc
pprFormatRegAddr name format src op
  = hcat [
        pprMnemonic name format,
        pprReg format src,
        comma,
        pprAddr op
    ]


pprShift :: LitString -> Format -> Operand -> Operand -> SDoc
pprShift name format src dest
  = hcat [
        pprMnemonic name format,
        pprOperand II8 src,  -- src is 8-bit sized
        comma,
        pprOperand format dest
    ]


pprFormatOpOpCoerce :: LitString -> Format -> Format -> Operand -> Operand -> SDoc
pprFormatOpOpCoerce name format1 format2 op1 op2
  = hcat [ char '\t', ptext name, pprFormat format1, pprFormat format2, space,
        pprOperand format1 op1,
        comma,
        pprOperand format2 op2
    ]


pprCondInstr :: LitString -> Cond -> SDoc -> SDoc
pprCondInstr name cond arg
  = hcat [ char '\t', ptext name, pprCond cond, space, arg]