{- (c) The GRASP/AQUA Project, Glasgow University, 1992-1998 ************************************************************************ * * \section[FloatIn]{Floating Inwards pass} * * ************************************************************************ The main purpose of @floatInwards@ is floating into branches of a case, so that we don't allocate things, save them on the stack, and then discover that they aren't needed in the chosen branch. -} {-# LANGUAGE CPP #-} module FloatIn ( floatInwards ) where #include "HsVersions.h" import CoreSyn import MkCore import HscTypes ( ModGuts(..) ) import CoreUtils ( exprIsDupable, exprIsExpandable, exprOkForSideEffects, mkTicks ) import CoreFVs import CoreMonad ( CoreM ) import Id ( isOneShotBndr, idType, isJoinId, isJoinId_maybe ) import Var import Type ( isUnliftedType ) import VarSet import Util import DynFlags import Outputable import Data.List ( mapAccumL ) import BasicTypes ( RecFlag(..), isRec ) {- Top-level interface function, @floatInwards@. Note that we do not actually float any bindings downwards from the top-level. -} floatInwards :: ModGuts -> CoreM ModGuts floatInwards pgm@(ModGuts { mg_binds = binds }) = do { dflags <- getDynFlags ; return (pgm { mg_binds = map (fi_top_bind dflags) binds }) } where fi_top_bind dflags (NonRec binder rhs) = NonRec binder (fiExpr dflags [] (freeVars rhs)) fi_top_bind dflags (Rec pairs) = Rec [ (b, fiExpr dflags [] (freeVars rhs)) | (b, rhs) <- pairs ] {- ************************************************************************ * * \subsection{Mail from Andr\'e [edited]} * * ************************************************************************ {\em Will wrote: What??? I thought the idea was to float as far inwards as possible, no matter what. This is dropping all bindings every time it sees a lambda of any kind. Help! } You are assuming we DO DO full laziness AFTER floating inwards! We have to [not float inside lambdas] if we don't. If we indeed do full laziness after the floating inwards (we could check the compilation flags for that) then I agree we could be more aggressive and do float inwards past lambdas. Actually we are not doing a proper full laziness (see below), which was another reason for not floating inwards past a lambda. This can easily be fixed. The problem is that we float lets outwards, but there are a few expressions which are not let bound, like case scrutinees and case alternatives. After floating inwards the simplifier could decide to inline the let and the laziness would be lost, e.g. \begin{verbatim} let a = expensive ==> \b -> case expensive of ... in \ b -> case a of ... \end{verbatim} The fix is \begin{enumerate} \item to let bind the algebraic case scrutinees (done, I think) and the case alternatives (except the ones with an unboxed type)(not done, I think). This is best done in the SetLevels.hs module, which tags things with their level numbers. \item do the full laziness pass (floating lets outwards). \item simplify. The simplifier inlines the (trivial) lets that were created but were not floated outwards. \end{enumerate} With the fix I think Will's suggestion that we can gain even more from strictness by floating inwards past lambdas makes sense. We still gain even without going past lambdas, as things may be strict in the (new) context of a branch (where it was floated to) or of a let rhs, e.g. \begin{verbatim} let a = something case x of in case x of alt1 -> case something of a -> a + a alt1 -> a + a ==> alt2 -> b alt2 -> b let a = something let b = case something of a -> a + a in let b = a + a ==> in (b,b) in (b,b) \end{verbatim} Also, even if a is not found to be strict in the new context and is still left as a let, if the branch is not taken (or b is not entered) the closure for a is not built. ************************************************************************ * * \subsection{Main floating-inwards code} * * ************************************************************************ -} type FreeVarSet = DIdSet type BoundVarSet = DIdSet data FloatInBind = FB BoundVarSet FreeVarSet FloatBind -- The FreeVarSet is the free variables of the binding. In the case -- of recursive bindings, the set doesn't include the bound -- variables. type FloatInBinds = [FloatInBind] -- In reverse dependency order (innermost binder first) fiExpr :: DynFlags -> FloatInBinds -- Binds we're trying to drop -- as far "inwards" as possible -> CoreExprWithFVs -- Input expr -> CoreExpr -- Result fiExpr _ to_drop (_, AnnLit lit) = ASSERT( null to_drop ) Lit lit fiExpr _ to_drop (_, AnnType ty) = ASSERT( null to_drop ) Type ty fiExpr _ to_drop (_, AnnVar v) = wrapFloats to_drop (Var v) fiExpr _ to_drop (_, AnnCoercion co) = wrapFloats to_drop (Coercion co) fiExpr dflags to_drop (_, AnnCast expr (co_ann, co)) = wrapFloats (drop_here ++ co_drop) $ Cast (fiExpr dflags e_drop expr) co where [drop_here, e_drop, co_drop] = sepBindsByDropPoint dflags False [freeVarsOf expr, freeVarsOfAnn co_ann] (freeVarsOfType expr `unionDVarSet` freeVarsOfTypeAnn co_ann) to_drop {- Applications: we do float inside applications, mainly because we need to get at all the arguments. The next simplifier run will pull out any silly ones. -} fiExpr dflags to_drop ann_expr@(_,AnnApp {}) = mkTicks ticks $ wrapFloats drop_here $ wrapFloats extra_drop $ mkApps (fiExpr dflags fun_drop ann_fun) (zipWith (fiExpr dflags) arg_drops ann_args) where (ann_fun, ann_args, ticks) = collectAnnArgsTicks tickishFloatable ann_expr (extra_fvs0, fun_fvs) | (_, AnnVar _) <- ann_fun = (freeVarsOf ann_fun, emptyDVarSet) -- Don't float the binding for f into f x y z; see Note [Join points] -- for why we *can't* do it when f is a join point. (If f isn't a -- join point, floating it in isn't especially harmful but it's -- useless since the simplifier will immediately float it back out.) | otherwise = (emptyDVarSet, freeVarsOf ann_fun) (extra_fvs, arg_fvs) = mapAccumL mk_arg_fvs extra_fvs0 ann_args mk_arg_fvs :: FreeVarSet -> CoreExprWithFVs -> (FreeVarSet, FreeVarSet) mk_arg_fvs extra_fvs ann_arg | noFloatIntoRhs False NonRecursive ann_arg = (extra_fvs `unionDVarSet` freeVarsOf ann_arg, emptyDVarSet) | otherwise = (extra_fvs, freeVarsOf ann_arg) drop_here : extra_drop : fun_drop : arg_drops = sepBindsByDropPoint dflags False (extra_fvs : fun_fvs : arg_fvs) (freeVarsOfType ann_fun `unionDVarSet` mapUnionDVarSet freeVarsOfType ann_args) to_drop {- Note [Do not destroy the let/app invariant] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Watch out for f (x +# y) We don't want to float bindings into here f (case ... of { x -> x +# y }) because that might destroy the let/app invariant, which requires unlifted function arguments to be ok-for-speculation. Note [Join points] ~~~~~~~~~~~~~~~~~~ Generally, we don't need to worry about join points - there are places we're not allowed to float them, but since they can't have occurrences in those places, we're not tempted. We do need to be careful about jumps, however: joinrec j x y z = ... in jump j a b c Previous versions often floated the definition of a recursive function into its only non-recursive occurrence. But for a join point, this is a disaster: (joinrec j x y z = ... in jump j) a b c -- wrong! Every jump must be exact, so the jump to j must have three arguments. Hence we're careful not to float into the target of a jump (though we can float into the arguments just fine). Note [Floating in past a lambda group] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * We must be careful about floating inside a value lambda. That risks losing laziness. The float-out pass might rescue us, but then again it might not. * We must be careful about type lambdas too. At one time we did, and there is no risk of duplicating work thereby, but we do need to be careful. In particular, here is a bad case (it happened in the cichelli benchmark: let v = ... in let f = /\t -> \a -> ... ==> let f = /\t -> let v = ... in \a -> ... This is bad as now f is an updatable closure (update PAP) and has arity 0. * Hack alert! We only float in through one-shot lambdas, not (as you might guess) through lone big lambdas. Reason: we float *out* past big lambdas (see the test in the Lam case of FloatOut.floatExpr) and we don't want to float straight back in again. It *is* important to float into one-shot lambdas, however; see the remarks with noFloatIntoRhs. So we treat lambda in groups, using the following rule: Float in if (a) there is at least one Id, and (b) there are no non-one-shot Ids Otherwise drop all the bindings outside the group. This is what the 'go' function in the AnnLam case is doing. (Join points are handled similarly: a join point is considered one-shot iff it's non-recursive, so we float only into non-recursive join points.) Urk! if all are tyvars, and we don't float in, we may miss an opportunity to float inside a nested case branch -} fiExpr dflags to_drop lam@(_, AnnLam _ _) | okToFloatInside bndrs -- Float in -- NB: Must line up with noFloatIntoRhs (AnnLam...); see Trac #7088 = mkLams bndrs (fiExpr dflags to_drop body) | otherwise -- Dump it all here = wrapFloats to_drop (mkLams bndrs (fiExpr dflags [] body)) where (bndrs, body) = collectAnnBndrs lam {- We don't float lets inwards past an SCC. ToDo: keep info on current cc, and when passing one, if it is not the same, annotate all lets in binds with current cc, change current cc to the new one and float binds into expr. -} fiExpr dflags to_drop (_, AnnTick tickish expr) | tickish `tickishScopesLike` SoftScope = Tick tickish (fiExpr dflags to_drop expr) | otherwise -- Wimp out for now - we could push values in = wrapFloats to_drop (Tick tickish (fiExpr dflags [] expr)) {- For @Lets@, the possible ``drop points'' for the \tr{to_drop} bindings are: (a)~in the body, (b1)~in the RHS of a NonRec binding, or~(b2), in each of the RHSs of the pairs of a @Rec@. Note that we do {\em weird things} with this let's binding. Consider: \begin{verbatim} let w = ... in { let v = ... w ... in ... v .. w ... } \end{verbatim} Look at the inner \tr{let}. As \tr{w} is used in both the bind and body of the inner let, we could panic and leave \tr{w}'s binding where it is. But \tr{v} is floatable further into the body of the inner let, and {\em then} \tr{w} will also be only in the body of that inner let. So: rather than drop \tr{w}'s binding here, we add it onto the list of things to drop in the outer let's body, and let nature take its course. Note [extra_fvs (1): avoid floating into RHS] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Consider let x=\y....t... in body. We do not necessarily want to float a binding for t into the RHS, because it'll immediately be floated out again. (It won't go inside the lambda else we risk losing work.) In letrec, we need to be more careful still. We don't want to transform let x# = y# +# 1# in letrec f = \z. ...x#...f... in ... into letrec f = let x# = y# +# 1# in \z. ...x#...f... in ... because now we can't float the let out again, because a letrec can't have unboxed bindings. So we make "extra_fvs" which is the rhs_fvs of such bindings, and arrange to dump bindings that bind extra_fvs before the entire let. Note [extra_fvs (2): free variables of rules] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Consider let x{rule mentioning y} = rhs in body Here y is not free in rhs or body; but we still want to dump bindings that bind y outside the let. So we augment extra_fvs with the idRuleAndUnfoldingVars of x. No need for type variables, hence not using idFreeVars. -} fiExpr dflags to_drop (_,AnnLet bind body) = fiExpr dflags (after ++ new_float : before) body -- to_drop is in reverse dependency order where (before, new_float, after) = fiBind dflags to_drop bind body_fvs body_ty_fvs body_fvs = freeVarsOf body body_ty_fvs = freeVarsOfType body {- For @Case@, the possible ``drop points'' for the \tr{to_drop} bindings are: (a)~inside the scrutinee, (b)~inside one of the alternatives/default [default FVs always {\em first}!]. Floating case expressions inward was added to fix Trac #5658: strict bindings not floated in. In particular, this change allows array indexing operations, which have a single DEFAULT alternative without any binders, to be floated inward. SIMD primops for unpacking SIMD vectors into an unboxed tuple of unboxed scalars also need to be floated inward, but unpacks have a single non-DEFAULT alternative that binds the elements of the tuple. We now therefore also support floating in cases with a single alternative that may bind values. -} fiExpr dflags to_drop (_, AnnCase scrut case_bndr _ [(con,alt_bndrs,rhs)]) | isUnliftedType (idType case_bndr) , exprOkForSideEffects (deAnnotate scrut) -- See PrimOp, Note [PrimOp can_fail and has_side_effects] = wrapFloats shared_binds $ fiExpr dflags (case_float : rhs_binds) rhs where case_float = FB (mkDVarSet (case_bndr : alt_bndrs)) scrut_fvs (FloatCase scrut' case_bndr con alt_bndrs) scrut' = fiExpr dflags scrut_binds scrut [shared_binds, scrut_binds, rhs_binds] = sepBindsByDropPoint dflags False [scrut_fvs, rhs_fvs] (freeVarsOfType scrut `unionDVarSet` rhs_ty_fvs) to_drop rhs_fvs = freeVarsOf rhs `delDVarSetList` (case_bndr : alt_bndrs) rhs_ty_fvs = freeVarsOfType rhs `delDVarSetList` (case_bndr : alt_bndrs) scrut_fvs = freeVarsOf scrut fiExpr dflags to_drop (_, AnnCase scrut case_bndr ty alts) = wrapFloats drop_here1 $ wrapFloats drop_here2 $ Case (fiExpr dflags scrut_drops scrut) case_bndr ty (zipWith fi_alt alts_drops_s alts) where -- Float into the scrut and alts-considered-together just like App [drop_here1, scrut_drops, alts_drops] = sepBindsByDropPoint dflags False [scrut_fvs, all_alts_fvs] (freeVarsOfType scrut `unionDVarSet` all_alts_ty_fvs) to_drop -- Float into the alts with the is_case flag set (drop_here2 : alts_drops_s) = sepBindsByDropPoint dflags True alts_fvs all_alts_ty_fvs alts_drops scrut_fvs = freeVarsOf scrut alts_fvs = map alt_fvs alts all_alts_fvs = unionDVarSets alts_fvs alts_ty_fvs = map alt_ty_fvs alts all_alts_ty_fvs = unionDVarSets alts_ty_fvs alt_fvs (_con, args, rhs) = foldl delDVarSet (freeVarsOf rhs) (case_bndr:args) alt_ty_fvs (_con, args, rhs) = foldl delDVarSet (freeVarsOfType rhs) (case_bndr:args) -- Delete case_bndr and args from free vars of rhs -- to get free vars of alt fi_alt to_drop (con, args, rhs) = (con, args, fiExpr dflags to_drop rhs) ------------------ fiBind :: DynFlags -> FloatInBinds -- Binds we're trying to drop -- as far "inwards" as possible -> CoreBindWithFVs -- Input binding -> DVarSet -- Free in scope of binding -> DVarSet -- Free in type of body of binding -> ( FloatInBinds -- Land these before , FloatInBind -- The binding itself , FloatInBinds) -- Land these after fiBind dflags to_drop (AnnNonRec id rhs) body_fvs body_ty_fvs = ( extra_binds ++ shared_binds -- Land these before -- See Note [extra_fvs (1,2)] , FB (unitDVarSet id) rhs_fvs' -- The new binding itself (FloatLet (NonRec id rhs')) , body_binds ) -- Land these after where body_fvs2 = body_fvs `delDVarSet` id rhs_fvs = freeVarsOf rhs rule_fvs = idRuleAndUnfoldingVarsDSet id -- See Note [extra_fvs (2): free variables of rules] extra_fvs | noFloatIntoRhs (isJoinId id) NonRecursive rhs = rule_fvs `unionDVarSet` freeVarsOf rhs | otherwise = rule_fvs -- See Note [extra_fvs (1): avoid floating into RHS] -- No point in floating in only to float straight out again -- We *can't* float into ok-for-speculation unlifted RHSs -- But do float into join points [shared_binds, extra_binds, rhs_binds, body_binds] = sepBindsByDropPoint dflags False [extra_fvs, rhs_fvs, body_fvs2] (freeVarsOfType rhs `unionDVarSet` body_ty_fvs) to_drop -- Push rhs_binds into the right hand side of the binding rhs' = fiRhs dflags rhs_binds id rhs rhs_fvs' = rhs_fvs `unionDVarSet` floatedBindsFVs rhs_binds `unionDVarSet` rule_fvs -- Don't forget the rule_fvs; the binding mentions them! fiBind dflags to_drop (AnnRec bindings) body_fvs body_ty_fvs = ( extra_binds ++ shared_binds , FB (mkDVarSet ids) rhs_fvs' (FloatLet (Rec (fi_bind rhss_binds bindings))) , body_binds ) where (ids, rhss) = unzip bindings rhss_fvs = map freeVarsOf rhss -- See Note [extra_fvs (1,2)] rule_fvs = mapUnionDVarSet idRuleAndUnfoldingVarsDSet ids extra_fvs = rule_fvs `unionDVarSet` unionDVarSets [ freeVarsOf rhs | (bndr, rhs) <- bindings , noFloatIntoRhs (isJoinId bndr) Recursive rhs ] (shared_binds:extra_binds:body_binds:rhss_binds) = sepBindsByDropPoint dflags False (extra_fvs:body_fvs:rhss_fvs) (body_ty_fvs `unionDVarSet` mapUnionDVarSet freeVarsOfType rhss) to_drop rhs_fvs' = unionDVarSets rhss_fvs `unionDVarSet` unionDVarSets (map floatedBindsFVs rhss_binds) `unionDVarSet` rule_fvs -- Don't forget the rule variables! -- Push rhs_binds into the right hand side of the binding fi_bind :: [FloatInBinds] -- one per "drop pt" conjured w/ fvs_of_rhss -> [(Id, CoreExprWithFVs)] -> [(Id, CoreExpr)] fi_bind to_drops pairs = [ (binder, fiRhs dflags to_drop binder rhs) | ((binder, rhs), to_drop) <- zipEqual "fi_bind" pairs to_drops ] ------------------ fiRhs :: DynFlags -> FloatInBinds -> CoreBndr -> CoreExprWithFVs -> CoreExpr fiRhs dflags to_drop bndr rhs | Just join_arity <- isJoinId_maybe bndr , let (bndrs, body) = collectNAnnBndrs join_arity rhs = mkLams bndrs (fiExpr dflags to_drop body) | otherwise = fiExpr dflags to_drop rhs ------------------ okToFloatInside :: [Var] -> Bool okToFloatInside bndrs = all ok bndrs where ok b = not (isId b) || isOneShotBndr b -- Push the floats inside there are no non-one-shot value binders noFloatIntoRhs :: Bool -> RecFlag -> CoreExprWithFVs -> Bool -- ^ True if it's a bad idea to float bindings into this RHS -- Preconditio: rhs :: rhs_ty noFloatIntoRhs is_join is_rec rhs@(_, rhs') | is_join = isRec is_rec -- Joins are one-shot iff non-recursive | otherwise = isUnliftedType rhs_ty -- See Note [Do not destroy the let/app invariant] || noFloatIntoExpr rhs' where rhs_ty = exprTypeFV rhs noFloatIntoExpr :: CoreExprWithFVs' -> Bool noFloatIntoExpr (AnnLam bndr e) = not (okToFloatInside (bndr:bndrs)) -- NB: Must line up with fiExpr (AnnLam...); see Trac #7088 where (bndrs, _) = collectAnnBndrs e -- IMPORTANT: don't say 'True' for a RHS with a one-shot lambda at the top. -- This makes a big difference for things like -- f x# = let x = I# x# -- in let j = \() -> ...x... -- in if <condition> then normal-path else j () -- If x is used only in the error case join point, j, we must float the -- boxing constructor into it, else we box it every time which is very bad -- news indeed. noFloatIntoExpr rhs = exprIsExpandable (deAnnotate' rhs) -- We'd just float right back out again... -- Should match the test in SimplEnv.doFloatFromRhs {- ************************************************************************ * * \subsection{@sepBindsByDropPoint@} * * ************************************************************************ This is the crucial function. The idea is: We have a wad of bindings that we'd like to distribute inside a collection of {\em drop points}; insides the alternatives of a \tr{case} would be one example of some drop points; the RHS and body of a non-recursive \tr{let} binding would be another (2-element) collection. So: We're given a list of sets-of-free-variables, one per drop point, and a list of floating-inwards bindings. If a binding can go into only one drop point (without suddenly making something out-of-scope), in it goes. If a binding is used inside {\em multiple} drop points, then it has to go in a you-must-drop-it-above-all-these-drop-points point. But, with coercions appearing in types, there is a complication: we might be floating in a "strict let" -- that is, a case. Case expressions mention their return type. We absolutely can't float a coercion binding inward to the point that the type of the expression it's about to wrap mentions the coercion. So we include the union of the sets of free variables of the types of all the drop points involved. If any of the floaters bind a coercion variable mentioned in any of the types, that binder must be dropped right away. We have to maintain the order on these drop-point-related lists. -} sepBindsByDropPoint :: DynFlags -> Bool -- True <=> is case expression -> [FreeVarSet] -- One set of FVs per drop point -> FreeVarSet -- Vars free in all the types of the drop points -> FloatInBinds -- Candidate floaters -> [FloatInBinds] -- FIRST one is bindings which must not be floated -- inside any drop point; the rest correspond -- one-to-one with the input list of FV sets -- Every input floater is returned somewhere in the result; -- none are dropped, not even ones which don't seem to be -- free in *any* of the drop-point fvs. Why? Because, for example, -- a binding (let x = E in B) might have a specialised version of -- x (say x') stored inside x, but x' isn't free in E or B. type DropBox = (FreeVarSet, FloatInBinds) sepBindsByDropPoint _ _is_case drop_pts _ty_fvs [] = [] : [[] | _ <- drop_pts] -- cut to the chase scene; it happens sepBindsByDropPoint dflags is_case drop_pts ty_fvs floaters = go floaters (map (\fvs -> (fvs, [])) (emptyDVarSet : drop_pts)) where go :: FloatInBinds -> [DropBox] -> [FloatInBinds] -- The *first* one in the argument list is the drop_here set -- The FloatInBinds in the lists are in the reverse of -- the normal FloatInBinds order; that is, they are the right way round! go [] drop_boxes = map (reverse . snd) drop_boxes go (bind_w_fvs@(FB bndrs bind_fvs bind) : binds) drop_boxes@(here_box : fork_boxes) = go binds new_boxes where -- "here" means the group of bindings dropped at the top of the fork (used_here : used_in_flags) = [ fvs `intersectsDVarSet` bndrs | (fvs, _) <- drop_boxes] used_in_ty = ty_fvs `intersectsDVarSet` bndrs drop_here = used_here || not can_push || used_in_ty -- For case expressions we duplicate the binding if it is -- reasonably small, and if it is not used in all the RHSs -- This is good for situations like -- let x = I# y in -- case e of -- C -> error x -- D -> error x -- E -> ...not mentioning x... n_alts = length used_in_flags n_used_alts = count id used_in_flags -- returns number of Trues in list. can_push = n_used_alts == 1 -- Used in just one branch || (is_case && -- We are looking at case alternatives n_used_alts > 1 && -- It's used in more than one n_used_alts < n_alts && -- ...but not all floatIsDupable dflags bind) -- and we can duplicate the binding new_boxes | drop_here = (insert here_box : fork_boxes) | otherwise = (here_box : new_fork_boxes) new_fork_boxes = zipWithEqual "FloatIn.sepBinds" insert_maybe fork_boxes used_in_flags insert :: DropBox -> DropBox insert (fvs,drops) = (fvs `unionDVarSet` bind_fvs, bind_w_fvs:drops) insert_maybe box True = insert box insert_maybe box False = box go _ _ = panic "sepBindsByDropPoint/go" floatedBindsFVs :: FloatInBinds -> FreeVarSet floatedBindsFVs binds = mapUnionDVarSet fbFVs binds fbFVs :: FloatInBind -> DVarSet fbFVs (FB _ fvs _) = fvs wrapFloats :: FloatInBinds -> CoreExpr -> CoreExpr -- Remember FloatInBinds is in *reverse* dependency order wrapFloats [] e = e wrapFloats (FB _ _ fl : bs) e = wrapFloats bs (wrapFloat fl e) floatIsDupable :: DynFlags -> FloatBind -> Bool floatIsDupable dflags (FloatCase scrut _ _ _) = exprIsDupable dflags scrut floatIsDupable dflags (FloatLet (Rec prs)) = all (exprIsDupable dflags . snd) prs floatIsDupable dflags (FloatLet (NonRec _ r)) = exprIsDupable dflags r