.. _using-ghc: Using GHC ========= .. index:: single: GHC, using single: using GHC Getting started: compiling programs ----------------------------------- In this chapter you'll find a complete reference to the GHC command-line syntax, including all 400+ flags. It's a large and complex system, and there are lots of details, so it can be quite hard to figure out how to get started. With that in mind, this introductory section provides a quick introduction to the basic usage of GHC for compiling a Haskell program, before the following sections dive into the full syntax. Let's create a Hello World program, and compile and run it. First, create a file :file:`hello.hs` containing the Haskell code: :: main = putStrLn "Hello, World!" To compile the program, use GHC like this: .. code-block:: sh $ ghc hello.hs (where ``$`` represents the prompt: don't type it). GHC will compile the source file :file:`hello.hs`, producing an object file :file:`hello.o` and an interface file :file:`hello.hi`, and then it will link the object file to the libraries that come with GHC to produce an executable called :file:`hello` on Unix/Linux/Mac, or :file:`hello.exe` on Windows. By default GHC will be very quiet about what it is doing, only printing error messages. If you want to see in more detail what's going on behind the scenes, add :ghc-flag:`-v` to the command line. Then we can run the program like this: .. code-block:: sh $ ./hello Hello World! If your program contains multiple modules, then you only need to tell GHC the name of the source file containing the ``Main`` module, and GHC will examine the ``import`` declarations to find the other modules that make up the program and find their source files. This means that, with the exception of the ``Main`` module, every source file should be named after the module name that it contains (with dots replaced by directory separators). For example, the module ``Data.Person`` would be in the file ``Data/Person.hs`` on Unix/Linux/Mac, or ``Data\Person.hs`` on Windows. Options overview ---------------- GHC's behaviour is controlled by options, which for historical reasons are also sometimes referred to as command-line flags or arguments. Options can be specified in three ways: Command-line arguments ~~~~~~~~~~~~~~~~~~~~~~ .. index:: single: structure, command-line single: command-line; arguments single: arguments; command-line An invocation of GHC takes the following form: .. code-block:: none ghc [argument...] Command-line arguments are either options or file names. Command-line options begin with ``-``. They may *not* be grouped: ``-vO`` is different from ``-v -O``. Options need not precede filenames: e.g., ``ghc *.o -o foo``. All options are processed and then applied to all files; you cannot, for example, invoke ``ghc -c -O1 Foo.hs -O2 Bar.hs`` to apply different optimisation levels to the files ``Foo.hs`` and ``Bar.hs``. .. note:: .. index:: single: command-line; order of arguments Note that command-line options are *order-dependent*, with arguments being evaluated from left-to-right. This can have seemingly strange effects in the presence of flag implication. For instance, consider :ghc-flag:`-fno-specialise <-fspecialise>` and :ghc-flag:`-O1` (which implies :ghc-flag:`-fspecialise`). These two command lines mean very different things: ``-fno-specialise -O1`` ``-fspecialise`` will be enabled as the ``-fno-specialise`` is overriden by the ``-O1``. ``-O1 -fno-specialise`` ``-fspecialise`` will not be enabled, since the ``-fno-specialise`` overrides the ``-fspecialise`` implied by ``-O1``. .. _source-file-options: Command line options in source files ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. index:: single: source-file options Sometimes it is useful to make the connection between a source file and the command-line options it requires quite tight. For instance, if a Haskell source file deliberately uses name shadowing, it should be compiled with the ``-Wno-name-shadowing`` option. Rather than maintaining the list of per-file options in a ``Makefile``, it is possible to do this directly in the source file using the ``OPTIONS_GHC`` :ref:`pragma ` :: {-# OPTIONS_GHC -Wno-name-shadowing #-} module X where ... ``OPTIONS_GHC`` is a *file-header pragma* (see :ref:`options-pragma`). Only *dynamic* flags can be used in an ``OPTIONS_GHC`` pragma (see :ref:`static-dynamic-flags`). Note that your command shell does not get to the source file options, they are just included literally in the array of command-line arguments the compiler maintains internally, so you'll be desperately disappointed if you try to glob etc. inside ``OPTIONS_GHC``. .. note:: The contents of ``OPTIONS_GHC`` are appended to the command-line options, so options given in the source file override those given on the command-line. It is not recommended to move all the contents of your Makefiles into your source files, but in some circumstances, the ``OPTIONS_GHC`` pragma is the Right Thing. (If you use :ghc-flag:`-keep-hc-file` and have ``OPTION`` flags in your module, the ``OPTIONS_GHC`` will get put into the generated ``.hc`` file). Setting options in GHCi ~~~~~~~~~~~~~~~~~~~~~~~ Options may also be modified from within GHCi, using the :ghci-cmd:`:set` command. .. _static-dynamic-flags: Static, Dynamic, and Mode options --------------------------------- .. index:: single: static; options single: dynamic; options single: mode; options Each of GHC's command line options is classified as static, dynamic or mode: For example, :ghc-flag:`--make` or :ghc-flag:`-E`. There may only be a single mode flag on the command line. The available modes are listed in :ref:`modes`. Most non-mode flags fall into this category. A dynamic flag may be used on the command line, in a ``OPTIONS_GHC`` pragma in a source file, or set using :ghci-cmd:`:set` in GHCi. A few flags are "static", which means they can only be used on the command-line, and remain in force over the entire GHC/GHCi run. The flag reference tables (:ref:`flag-reference`) lists the status of each flag. There are a few flags that are static except that they can also be used with GHCi's :ghci-cmd:`:set` command; these are listed as “static/\ ``:set``\ ” in the table. .. _file-suffixes: Meaningful file suffixes ------------------------ .. index:: single: suffixes, file single: file suffixes for GHC File names with "meaningful" suffixes (e.g., ``.lhs`` or ``.o``) cause the "right thing" to happen to those files. ``.hs`` A Haskell module. ``.lhs`` .. index:: single: lhs file extension A “literate Haskell” module. ``.hspp`` A file created by the preprocessor. ``.hi`` A Haskell interface file, probably compiler-generated. ``.hc`` Intermediate C file produced by the Haskell compiler. ``.c`` A C file not produced by the Haskell compiler. ``.ll`` An llvm-intermediate-language source file, usually produced by the compiler. ``.bc`` An llvm-intermediate-language bitcode file, usually produced by the compiler. ``.s`` An assembly-language source file, usually produced by the compiler. ``.o`` An object file, produced by an assembler. Files with other suffixes (or without suffixes) are passed straight to the linker. .. _modes: Modes of operation ------------------ .. index:: single: help options GHC's behaviour is firstly controlled by a mode flag. Only one of these flags may be given, but it does not necessarily need to be the first option on the command-line. For instance, .. code-block:: none $ ghc Main.hs --make -o my-application If no mode flag is present, then GHC will enter :ghc-flag:`--make` mode (:ref:`make-mode`) if there are any Haskell source files given on the command line, or else it will link the objects named on the command line to produce an executable. The available mode flags are: .. ghc-flag:: --interactive :shortdesc: Interactive mode - normally used by just running ``ghci``; see :ref:`ghci` for details. :type: mode :category: modes .. index:: single: interactive mode single: GHCi Interactive mode, which is also available as :program:`ghci`. Interactive mode is described in more detail in :ref:`ghci`. .. ghc-flag:: --make :shortdesc: Build a multi-module Haskell program, automatically figuring out dependencies. Likely to be much easier, and faster, than using ``make``; see :ref:`make-mode` for details. :type: mode :category: modes .. index:: single: make mode; of GHC In this mode, GHC will build a multi-module Haskell program automatically, figuring out dependencies for itself. If you have a straightforward Haskell program, this is likely to be much easier, and faster, than using :command:`make`. Make mode is described in :ref:`make-mode`. This mode is the default if there are any Haskell source files mentioned on the command line, and in this case the :ghc-flag:`--make` option can be omitted. .. ghc-flag:: -e ⟨expr⟩ :shortdesc: Evaluate ``expr``; see :ref:`eval-mode` for details. :type: mode :category: modes .. index:: single: eval mode; of GHC Expression-evaluation mode. This is very similar to interactive mode, except that there is a single expression to evaluate (⟨expr⟩) which is given on the command line. See :ref:`eval-mode` for more details. .. ghc-flag:: -E :shortdesc: Stop after preprocessing (``.hspp`` file) :type: mode :category: phases Stop after preprocessing (``.hspp`` file) .. ghc-flag:: -C :shortdesc: Stop after generating C (``.hc`` file) :type: mode :category: phases Stop after generating C (``.hc`` file) .. ghc-flag:: -S :shortdesc: Stop after generating assembly (``.s`` file) :type: mode :category: phases Stop after generating assembly (``.s`` file) .. ghc-flag:: -c :shortdesc: Stop after generating object (``.o``) file :type: mode :category: phases Stop after generating object (``.o``) file This is the traditional batch-compiler mode, in which GHC can compile source files one at a time, or link objects together into an executable. See :ref:`options-order`. .. ghc-flag:: -M :shortdesc: generate dependency information suitable for use in a ``Makefile``; see :ref:`makefile-dependencies` for details. :type: mode :category: modes .. index:: single: dependency-generation mode; of GHC Dependency-generation mode. In this mode, GHC can be used to generate dependency information suitable for use in a ``Makefile``. See :ref:`makefile-dependencies`. .. ghc-flag:: --frontend ⟨module⟩ :shortdesc: run GHC with the given frontend plugin; see :ref:`frontend_plugins` for details. :type: mode :category: modes .. index:: single: frontend plugins; using Run GHC using the given frontend plugin. See :ref:`frontend_plugins` for details. .. ghc-flag:: --mk-dll :shortdesc: DLL-creation mode (Windows only) :type: mode :category: modes .. index:: single: DLL-creation mode DLL-creation mode (Windows only). See :ref:`win32-dlls-create`. .. ghc-flag:: --help -? :shortdesc: Display help :type: mode :category: modes Cause GHC to spew a long usage message to standard output and then exit. .. ghc-flag:: --show-iface ⟨file⟩ :shortdesc: display the contents of an interface file. :type: mode :category: modes Read the interface in ⟨file⟩ and dump it as text to ``stdout``. For example ``ghc --show-iface M.hi``. .. ghc-flag:: --supported-extensions --supported-languages :shortdesc: display the supported language extensions :type: mode :category: modes Print the supported language extensions. .. ghc-flag:: --show-options :shortdesc: display the supported command line options :type: mode :category: modes Print the supported command line options. This flag can be used for autocompletion in a shell. .. ghc-flag:: --info :shortdesc: display information about the compiler :type: mode :category: modes Print information about the compiler. .. ghc-flag:: --version -V :shortdesc: display GHC version :type: mode :category: modes Print a one-line string including GHC's version number. .. ghc-flag:: --numeric-version :shortdesc: display GHC version (numeric only) :type: mode :category: modes Print GHC's numeric version number only. .. ghc-flag:: --print-libdir :shortdesc: display GHC library directory :type: mode :category: modes .. index:: single: libdir Print the path to GHC's library directory. This is the top of the directory tree containing GHC's libraries, interfaces, and include files (usually something like ``/usr/local/lib/ghc-5.04`` on Unix). This is the value of ``$libdir`` in the package configuration file (see :ref:`packages`). .. _make-mode: Using ``ghc`` ``--make`` ~~~~~~~~~~~~~~~~~~~~~~~~ .. index:: single: --make; mode of GHC single: separate compilation In this mode, GHC will build a multi-module Haskell program by following dependencies from one or more root modules (usually just ``Main``). For example, if your ``Main`` module is in a file called :file:`Main.hs`, you could compile and link the program like this: .. code-block:: none ghc --make Main.hs In fact, GHC enters make mode automatically if there are any Haskell source files on the command line and no other mode is specified, so in this case we could just type .. code-block:: none ghc Main.hs Any number of source file names or module names may be specified; GHC will figure out all the modules in the program by following the imports from these initial modules. It will then attempt to compile each module which is out of date, and finally, if there is a ``Main`` module, the program will also be linked into an executable. The main advantages to using ``ghc --make`` over traditional ``Makefile``\s are: - GHC doesn't have to be restarted for each compilation, which means it can cache information between compilations. Compiling a multi-module program with ``ghc --make`` can be up to twice as fast as running ``ghc`` individually on each source file. - You don't have to write a ``Makefile``. .. index:: single: Makefiles; avoiding - GHC re-calculates the dependencies each time it is invoked, so the dependencies never get out of sync with the source. - Using the :ghc-flag:`-j[⟨n⟩]` flag, you can compile modules in parallel. Specify ``-j ⟨n⟩`` to compile ⟨n⟩ jobs in parallel. If ⟨n⟩ is omitted, then it defaults to the number of processors. Any of the command-line options described in the rest of this chapter can be used with ``--make``, but note that any options you give on the command line will apply to all the source files compiled, so if you want any options to apply to a single source file only, you'll need to use an ``OPTIONS_GHC`` pragma (see :ref:`source-file-options`). If the program needs to be linked with additional objects (say, some auxiliary C code), then the object files can be given on the command line and GHC will include them when linking the executable. For backward compatibility with existing make scripts, when used in combination with :ghc-flag:`-c`, the linking phase is omitted (same as ``--make -no-link``). Note that GHC can only follow dependencies if it has the source file available, so if your program includes a module for which there is no source file, even if you have an object and an interface file for the module, then GHC will complain. The exception to this rule is for package modules, which may or may not have source files. The source files for the program don't all need to be in the same directory; the :ghc-flag:`-i` option can be used to add directories to the search path (see :ref:`search-path`). .. ghc-flag:: -j[⟨n⟩] :shortdesc: When compiling with :ghc-flag:`--make`, compile ⟨n⟩ modules in parallel. :type: dynamic :category: misc Perform compilation in parallel when possible. GHC will use up to ⟨N⟩ threads during compilation. If N is omitted, then it defaults to the number of processors. Note that compilation of a module may not begin until its dependencies have been built. .. _eval-mode: Expression evaluation mode ~~~~~~~~~~~~~~~~~~~~~~~~~~ This mode is very similar to interactive mode, except that there is a single expression to evaluate which is specified on the command line as an argument to the ``-e`` option: .. code-block:: none ghc -e expr Haskell source files may be named on the command line, and they will be loaded exactly as in interactive mode. The expression is evaluated in the context of the loaded modules. For example, to load and run a Haskell program containing a module ``Main``, we might say: .. code-block:: none ghc -e Main.main Main.hs or we can just use this mode to evaluate expressions in the context of the ``Prelude``: .. code-block:: none $ ghc -e "interact (unlines.map reverse.lines)" hello olleh .. _options-order: Batch compiler mode ~~~~~~~~~~~~~~~~~~~ In *batch mode*, GHC will compile one or more source files given on the command line. The first phase to run is determined by each input-file suffix, and the last phase is determined by a flag. If no relevant flag is present, then go all the way through to linking. This table summarises: +-----------------------------------+------------------------------+----------------------------+---------------------------+ | Phase of the compilation system | Suffix saying “start here” | Flag saying “stop after” | (suffix of) output file | +===================================+==============================+============================+===========================+ | literate pre-processor | ``.lhs`` | | ``.hs`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ | C pre-processor (opt.) | ``.hs`` (with ``-cpp``) | ``-E`` | ``.hspp`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ | Haskell compiler | ``.hs`` | ``-C``, ``-S`` | ``.hc``, ``.s`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ | C compiler (opt.) | ``.hc`` or ``.c`` | ``-S`` | ``.s`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ | assembler | ``.s`` | ``-c`` | ``.o`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ | linker | ⟨other⟩ | | ``a.out`` | +-----------------------------------+------------------------------+----------------------------+---------------------------+ .. index:: single: -C single: -E single: -S single: -c Thus, a common invocation would be: .. code-block:: none ghc -c Foo.hs to compile the Haskell source file ``Foo.hs`` to an object file ``Foo.o``. .. note:: What the Haskell compiler proper produces depends on what backend code generator is used. See :ref:`code-generators` for more details. .. note:: Pre-processing is optional, the :ghc-flag:`-cpp` flag turns it on. See :ref:`c-pre-processor` for more details. .. note:: The option :ghc-flag:`-E` runs just the pre-processing passes of the compiler, dumping the result in a file. .. note:: The option :ghc-flag:`-C` is only available when GHC is built in unregisterised mode. See :ref:`unreg` for more details. .. _overriding-suffixes: Overriding the default behaviour for a file ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ As described above, the way in which a file is processed by GHC depends on its suffix. This behaviour can be overridden using the :ghc-flag:`-x ⟨suffix⟩` option: .. ghc-flag:: -x ⟨suffix⟩ :shortdesc: Override default behaviour for source files :type: dynamic :category: phases Causes all files following this option on the command line to be processed as if they had the suffix ⟨suffix⟩. For example, to compile a Haskell module in the file ``M.my-hs``, use ``ghc -c -x hs M.my-hs``. .. _options-help: Verbosity options ----------------- .. index:: single: verbosity options See also the ``--help``, ``--version``, ``--numeric-version``, and ``--print-libdir`` modes in :ref:`modes`. .. ghc-flag:: -v :shortdesc: verbose mode (equivalent to ``-v3``) :type: dynamic :category: verbosity The :ghc-flag:`-v` option makes GHC *verbose*: it reports its version number and shows (on stderr) exactly how it invokes each phase of the compilation system. Moreover, it passes the ``-v`` flag to most phases; each reports its version number (and possibly some other information). Please, oh please, use the ``-v`` option when reporting bugs! Knowing that you ran the right bits in the right order is always the first thing we want to verify. .. ghc-flag:: -v⟨n⟩ :shortdesc: set verbosity level :type: dynamic :category: verbosity To provide more control over the compiler's verbosity, the ``-v`` flag takes an optional numeric argument. Specifying ``-v`` on its own is equivalent to ``-v3``, and the other levels have the following meanings: ``-v0`` Disable all non-essential messages (this is the default). ``-v1`` Minimal verbosity: print one line per compilation (this is the default when :ghc-flag:`--make` or :ghc-flag:`--interactive` is on). ``-v2`` Print the name of each compilation phase as it is executed. (equivalent to :ghc-flag:`-dshow-passes`). ``-v3`` The same as ``-v2``, except that in addition the full command line (if appropriate) for each compilation phase is also printed. ``-v4`` The same as ``-v3`` except that the intermediate program representation after each compilation phase is also printed (excluding preprocessed and C/assembly files). .. ghc-flag:: -fprint-potential-instances :shortdesc: display all available instances in type error messages :type: dynamic :reverse: -fno-print-potential-instances :category: verbosity When GHC can't find an instance for a class, it displays a short list of some in the instances it knows about. With this flag it prints *all* the instances it knows about. .. ghc-flag:: -fhide-source-paths :shortdesc: hide module source and object paths :type: dynamic :category: verbosity Starting with minimal verbosity (``-v1``, see :ghc-flag:`-v`), GHC displays the name, the source path and the target path of each compiled module. This flag can be used to reduce GHC's output by hiding source paths and target paths. The following flags control the way in which GHC displays types in error messages and in GHCi: .. ghc-flag:: -fprint-unicode-syntax :shortdesc: Use unicode syntax when printing expressions, types and kinds. See also :ghc-flag:`-XUnicodeSyntax` :type: dynamic :reverse: -fno-print-unicode-syntax :category: verbosity When enabled GHC prints type signatures using the unicode symbols from the :ghc-flag:`-XUnicodeSyntax` extension. For instance, .. code-block:: none ghci> :set -fprint-unicode-syntax ghci> :t +v (>>) (>>) ∷ Monad m ⇒ ∀ a b. m a → m b → m b .. _pretty-printing-types: .. ghc-flag:: -fprint-explicit-foralls :shortdesc: Print explicit ``forall`` quantification in types. See also :ghc-flag:`-XExplicitForAll` :type: dynamic :reverse: -fno-print-explicit-foralls :category: verbosity Using :ghc-flag:`-fprint-explicit-foralls` makes GHC print explicit ``forall`` quantification at the top level of a type; normally this is suppressed. For example, in GHCi: .. code-block:: none ghci> let f x = x ghci> :t f f :: a -> a ghci> :set -fprint-explicit-foralls ghci> :t f f :: forall a. a -> a However, regardless of the flag setting, the quantifiers are printed under these circumstances: - For nested ``foralls``, e.g. .. code-block:: none ghci> :t GHC.ST.runST GHC.ST.runST :: (forall s. GHC.ST.ST s a) -> a - If any of the quantified type variables has a kind that mentions a kind variable, e.g. .. code-block:: none ghci> :i Data.Type.Equality.sym Data.Type.Equality.sym :: forall (k :: BOX) (a :: k) (b :: k). (a Data.Type.Equality.:~: b) -> b Data.Type.Equality.:~: a -- Defined in Data.Type.Equality .. ghc-flag:: -fprint-explicit-kinds :shortdesc: Print explicit kind foralls and kind arguments in types. See also :ghc-flag:`-XKindSignatures` :type: dynamic :reverse: -fno-print-explicit-kinds :category: verbosity Using :ghc-flag:`-fprint-explicit-kinds` makes GHC print kind arguments in types, which are normally suppressed. This can be important when you are using kind polymorphism. For example: .. code-block:: none ghci> :set -XPolyKinds ghci> data T a = MkT ghci> :t MkT MkT :: forall (k :: BOX) (a :: k). T a ghci> :set -fprint-explicit-foralls ghci> :t MkT MkT :: forall (k :: BOX) (a :: k). T k a .. ghc-flag:: -fprint-explicit-runtime-reps :shortdesc: Print ``RuntimeRep`` variables in types which are runtime-representation polymorphic. :type: dynamic :reverse: -fno-print-explicit-runtime-reps :category: verbosity When :ghc-flag:`-fprint-explicit-runtime-reps` is enabled, GHC prints ``RuntimeRep`` type variables for levity-polymorphic types. Otherwise GHC will default these to ``LiftedRep``. For example, .. code-block:: none ghci> :t ($) ($) :: (a -> b) -> a -> b ghci> :set -fprint-explicit-runtime-reps ghci> :t ($) ($) :: forall (r :: GHC.Types.RuntimeRep) a (b :: TYPE r). (a -> b) -> a -> b .. ghc-flag:: -fprint-explicit-coercions :shortdesc: Print coercions in types :type: dynamic :reverse: -fno-print-explicit-coercions :category: verbosity Using :ghc-flag:`-fprint-explicit-coercions` makes GHC print coercions in types. When trying to prove the equality between types of different kinds, GHC uses type-level coercions. Users will rarely need to see these, as they are meant to be internal. .. ghc-flag:: -fprint-equality-relations :shortdesc: Distinguish between equality relations when printing :type: dynamic :reverse: -fno-print-equality-relations :category: verbosity Using :ghc-flag:`-fprint-equality-relations` tells GHC to distinguish between its equality relations when printing. For example, ``~`` is homogeneous lifted equality (the kinds of its arguments are the same) while ``~~`` is heterogeneous lifted equality (the kinds of its arguments might be different) and ``~#`` is heterogeneous unlifted equality, the internal equality relation used in GHC's solver. Generally, users should not need to worry about the subtleties here; ``~`` is probably what you want. Without :ghc-flag:`-fprint-equality-relations`, GHC prints all of these as ``~``. See also :ref:`equality-constraints`. .. ghc-flag:: -fprint-expanded-synonyms :shortdesc: In type errors, also print type-synonym-expanded types. :type: dynamic :reverse: -fno-print-expanded-synonyms :category: verbosity When enabled, GHC also prints type-synonym-expanded types in type errors. For example, with this type synonyms: :: type Foo = Int type Bar = Bool type MyBarST s = ST s Bar This error message: .. code-block:: none Couldn't match type 'Int' with 'Bool' Expected type: ST s Foo Actual type: MyBarST s Becomes this: .. code-block:: none Couldn't match type 'Int' with 'Bool' Expected type: ST s Foo Actual type: MyBarST s Type synonyms expanded: Expected type: ST s Int Actual type: ST s Bool .. ghc-flag:: -fprint-typechecker-elaboration :shortdesc: Print extra information from typechecker. :type: dynamic :reverse: -fno-print-typechecker-elaboration :category: verbosity When enabled, GHC also prints extra information from the typechecker in warnings. For example: :: main :: IO () main = do return $ let a = "hello" in a return () This warning message: .. code-block:: none A do-notation statement discarded a result of type ‘[Char]’ Suppress this warning by saying ‘_ <- ($) return let a = "hello" in a’ or by using the flag -fno-warn-unused-do-bind Becomes this: .. code-block:: none A do-notation statement discarded a result of type ‘[Char]’ Suppress this warning by saying ‘_ <- ($) return let AbsBinds [] [] {Exports: [a <= a <>] Exported types: a :: [Char] [LclId, Str=DmdType] Binds: a = "hello"} in a’ or by using the flag -fno-warn-unused-do-bind .. ghc-flag:: -fdiagnostics-color=⟨always|auto|never⟩ :shortdesc: Use colors in error messages :type: dynamic :category: verbosity Causes GHC to display error messages with colors. To do this, the terminal must have support for ANSI color codes, or else garbled text will appear. The default value is ``auto``, which means GHC will make an attempt to detect whether terminal supports colors and choose accordingly. The precise color scheme is controlled by the environment variable ``GHC_COLORS`` (or ``GHC_COLOURS``). This can be set to colon-separated list of ``key=value`` pairs. These are the default settings: .. code-block:: none header=:message=1:warning=1;35:error=1;31:fatal=1;31:margin=1;34 Each value is expected to be a `Select Graphic Rendition (SGR) substring `_. The formatting of each element can inherit from parent elements. For example, if ``header`` is left empty, it will inherit the formatting of ``message``. Alternatively if ``header`` is set to ``1`` (bold), it will be bolded but still inherits the color of ``message``. Currently, in the primary message, the following inheritance tree is in place: - ``message`` - ``header`` - ``warning`` - ``error`` - ``fatal`` In the caret diagnostics, there is currently no inheritance at all between ``margin``, ``warning``, ``error``, and ``fatal``. The environment variable can also be set to the magical values ``never`` or ``always``, which is equivalent to setting the corresponding ``-fdiagnostics-color`` flag but with lower precedence. .. ghc-flag:: -fdiagnostics-show-caret :shortdesc: Whether to show snippets of original source code :type: dynamic :reverse: -fno-diagnostics-show-caret :category: verbosity Controls whether GHC displays a line of the original source code where the error was detected. This also affects the associated caret symbol that points at the region of code at fault. The flag is on by default. .. ghc-flag:: -ferror-spans :shortdesc: Output full span in error messages :type: dynamic :category: verbosity Causes GHC to emit the full source span of the syntactic entity relating to an error message. Normally, GHC emits the source location of the start of the syntactic entity only. For example: .. code-block:: none test.hs:3:6: parse error on input `where' becomes: .. code-block:: none test296.hs:3:6-10: parse error on input `where' And multi-line spans are possible too: .. code-block:: none test.hs:(5,4)-(6,7): Conflicting definitions for `a' Bound at: test.hs:5:4 test.hs:6:7 In the binding group for: a, b, a Note that line numbers start counting at one, but column numbers start at zero. This choice was made to follow existing convention (i.e. this is how Emacs does it). .. ghc-flag:: -H ⟨size⟩ :shortdesc: Set the minimum size of the heap to ⟨size⟩ :type: dynamic :category: misc Set the minimum size of the heap to ⟨size⟩. This option is equivalent to ``+RTS -Hsize``, see :ref:`rts-options-gc`. .. ghc-flag:: -Rghc-timing :shortdesc: Summarise timing stats for GHC (same as ``+RTS -tstderr``). :type: dynamic :category: verbosity Prints a one-line summary of timing statistics for the GHC run. This option is equivalent to ``+RTS -tstderr``, see :ref:`rts-options-gc`. .. _options-platform: Platform-specific Flags ----------------------- .. index:: single: -m\* options single: platform-specific options single: machine-specific options Some flags only make sense for particular target platforms. .. ghc-flag:: -msse2 :shortdesc: (x86 only) Use SSE2 for floating-point operations :type: dynamic :category: platform-options (x86 only, added in GHC 7.0.1) Use the SSE2 registers and instruction set to implement floating point operations when using the :ref:`native code generator `. This gives a substantial performance improvement for floating point, but the resulting compiled code will only run on processors that support SSE2 (Intel Pentium 4 and later, or AMD Athlon 64 and later). The :ref:`LLVM backend ` will also use SSE2 if your processor supports it but detects this automatically so no flag is required. SSE2 is unconditionally used on x86-64 platforms. .. ghc-flag:: -msse4.2 :shortdesc: (x86 only) Use SSE4.2 for floating-point operations :type: dynamic :category: platform-options (x86 only, added in GHC 7.4.1) Use the SSE4.2 instruction set to implement some floating point and bit operations when using the :ref:`native code generator `. The resulting compiled code will only run on processors that support SSE4.2 (Intel Core i7 and later). The :ref:`LLVM backend ` will also use SSE4.2 if your processor supports it but detects this automatically so no flag is required. Miscellaneous flags ------------------- .. index:: single: miscellaneous flags Some flags only make sense for a particular use case. .. ghc-flag:: -ghcversion-file ⟨path to ghcversion.h⟩ :shortdesc: (GHC as a C compiler only) Use this ``ghcversion.h`` file :type: dynamic :category: misc When GHC is used to compile C files, GHC adds package include paths and includes ``ghcversion.h`` directly. The compiler will lookup the path for the ``ghcversion.h`` file from the ``rts`` package in the package database. In some cases, the compiler's package database does not contain the ``rts`` package, or one wants to specify a specific ``ghcversions.h`` to be included. This option can be used to specify the path to the ``ghcversions.h`` file to be included. This is primarily intended to be used by GHC's build system.