3. Release notes for version 8.8.1¶

The significant changes to the various parts of the compiler are listed in the following sections. There have also been numerous bug fixes and performance improvements over the 8.6.1 release.

3.1. Highlights¶

The highlights, since the 8.6.1 release, are:

GHC now supports visible type applications at the type level.
Type variables in type family instances and rewrite rules can now be explicitly forall-bound.
A new code layout algorithm for x86.
The final phase of the MonadFail proposal has been implemented.
Many, many bug fixes.

3.2. Full details¶

3.2.1. Language¶

GHC now supports visible kind applications, as described in GHC proposal #15. This extends the existing visible type applications feature to permit type applications at the type level (e.g., f :: Proxy ('Just @Bool 'True)) in addition to the term level (e.g., g = Just @Bool True).

GHC now allows explicitly binding type variables in type family instances and rewrite rules, as described in GHC proposal #7. For instance:

type family G a b where
  forall x y. G [x] (Proxy y) = Double
  forall z.   G z   z         = Bool
{-# RULES "example" forall a. forall (x :: a). id x = x #-}

ScopedTypeVariables: The type variable that a type signature on a pattern can bring into scope can now stand for arbitrary types. Previously, they could only stand in for other type variables, but this restriction was deemed unnecessary in GHC proposal #29. Also see Issue #15050.
The pattern-match coverage checker now checks for cases that are unreachable due to constructors have strict argument types. For instance, in the following example:
```
data K = K1 | K2 !Void

f :: K -> ()
f K1 = ()
```
K2 cannot be matched on in f, since it is impossible to construct a terminating value of type Void. Accordingly, GHC will not warn about K2 (whereas previous versions of GHC would).
(!) and (.) are now valid type operators:
```
type family a ! b
type family a . b
```
forall is now always a keyword in types to provide more helpful error messages when -XExplicitForall is off.

An existential context no longer requires parenthesization:

class a + b
data D1 = forall a b. (a + b) => D1 a b
data D2 = forall a b.  a + b  => D2 a b -- now allowed

{-# UNPACK #-} annotation no longer requires parenthesization:

data T = MkT1 { a :: {-# UNPACK #-} (Maybe Int && Bool) }
       | MkT2 { a :: {-# UNPACK #-}  Maybe Int && Bool  } -- now allowed

data G where
  MkG1 :: {-# UNPACK #-} (Maybe Int && Bool) -> G
  MkG2 :: {-# UNPACK #-}  Maybe Int && Bool  -> G  -- now allowed

The requirement that kind signatures always be parenthesized has been relaxed. For instance, it is now permissible to write Proxy '(a :: A, b :: B) (previous GHC versions required extra parens: Proxy '((a :: A), (b :: B))).
-Woverflowed-literals checks all literals. Previously, it would only inspect boxed expression literals.
-Wempty-enumerations now also works for Numeric.Natural.

3.2.2. Compiler¶

The final phase of the MonadFail proposal has been implemented. Accordingly, the MonadFailDesugaring language extension is now deprecated, as its effects are always enabled. Similarly, the -Wnoncanonical-monadfail-instances flag is also deprecated, as there is no longer any way to define a “non-canonical” Monad or MonadFail instance.
New -keep-hscpp-files to keep the output of the CPP pre-processor.
The -Wcompat warning group now includes -Wstar-is-type.
The -fllvm-pass-vectors-in-regs flag is now deprecated as vector arguments are now passed in registers by default.
The -fblock-layout-cfg flag enables a new code layout algorithm on x86. This is enabled by default at -O and -O2.
The deprecated ghc-flag -Wamp has been removed.
Add new -Wmissing-deriving-strategies flag that warns users when they are not taking advantage of DerivingStrategies. The warning is supplied at each deriving site.
When loading modules that use UnboxedTuples into GHCi, it will now automatically enable -fobject-code for these modules and all modules they depend on. Before this change, attempting to load these modules into the interpreter would just fail, and the only convenient workaround was to enable -fobject-code for all modules.
Add support for generating a new type of output: extended interfaces files. Generation of these files, which sport a .hie suffix, is enabled via the -fwrite-ide-info flag. See Options related to extended interface files for more information.

3.2.3. LLVM backend¶

The LLVM backend of this release is compatible with LLVM 7.

3.2.4. Runtime system¶

Add and document new FFI functions hs_lock_stable_ptr_table and hs_unlock_stable_ptr_table. These replace the undocumented functions hs_lock_stable_tables and hs_unlock_stable_tables, respectively. The latter should now be considered deprecated.
Document the heretofore undocumented FFI function hs_free_stable_ptr_unsafe, used in conjunction with manual locking and unlocking.
The runtime linker on Windows has been overhauled to properly handle section alignment, lower the amount of wasted memory and lower the amount of in use memory. See Issue #13617. Note that committed memory may be slightly higher.
The output filename used for eventlog output can now be specified with the -ol flag.

3.2.5. Template Haskell¶

Reifying type classes no longer shows redundant class type variables and contexts in the type signature of each class method. For instance, reifying the following class:
```
class C a where
  method :: a
```
Used to produce the following:
```
class C a where
  method :: forall a. C a => a
```
Where the forall a. C a => part is entirely redundant. This part is no longer included when reifying C. It’s possible that this may break some code which assumes the existence of forall a. C a =>.
Template Haskell has been updated to support visible kind applications and explicit foralls in type family instances and RULES. These required a couple of backwards-incompatible changes to the template-haskell API. Please refer to the GHC 8.8 Migration Guide for more details.
Template Haskell now supports implicit parameters and recursive do.
Template Haskell splices can now embed assembler source (Issue #16180)

3.2.6. `ghc-prim` library¶

GHC now exposes a new primop, traceBinaryEvent#. This primop writes eventlog events similar to traceEvent# but allows the user to pass the event payload as a binary blob instead of a zero-terminated ByteString.
The StableName# type parameter now has a phantom role instead of a representational one. There is really no reason to care about the type of the underlying object.

3.2.7. `ghc` library¶

Continued refinemnt of Trees That Grow AST representation.

3.2.8. `base` library¶

The final phase of the MonadFail proposal has been implemented. As a result of this change:
- The fail method of Monad has been removed in favor of the method of the same name in the MonadFail class.
- MonadFail(fail) is now re-exported from the Prelude and Control.Monad modules.
These are breaking changes that may require you to update your code. Please refer to the GHC 8.8 Migration Guide for more details.
Support the characters from recent versions of Unicode (up to v. 12) in literals
(see Issue #5518).
The StableName type parameter now has a phantom role instead of a representational one. There is really no reason to care about the type of the underlying object.
The functions zipWith3 and zip3 in Prelude can now fuse, together with zipWith4 to zipWith7 as well as their tuple counterparts in Data.List.

3.2.9. Build system¶

Configure: Add ALEX and HAPPY variables to explicitly set the alex and happy programs to use.
Configure: Deprecate –with-ghc=ARG in favour of the GHC variable.

3.3. Included libraries¶

The package database provided with this distribution also contains a number of packages other than GHC itself. See the changelogs provided with these packages for further change information.

Package	Version	Reason for inclusion
ghc	8.8.4	The compiler itself
Cabal	3.0.1.0	Dependency of `ghc-pkg` utility
Win32	2.6.1.0	Dependency of `ghc` library
array	0.5.4.0	Dependency of `ghc` library
base	4.13.0.0	Core library
binary	0.8.7.0	Dependency of `ghc` library
bytestring	0.10.10.1	Dependency of `ghc` library
containers	0.6.2.1	Dependency of `ghc` library
deepseq	1.4.4.0	Dependency of `ghc` library
directory	1.3.6.0	Dependency of `ghc` library
filepath	1.4.2.1	Dependency of `ghc` library
ghc-boot-th	8.8.4	Internal compiler library
ghc-boot	8.8.4	Internal compiler library
ghc-compact	0.1.0.0	Core library
ghc-heap	8.8.4	GHC heap-walking library
ghc-prim	0.5.3	Core library
ghci	8.8.4	The REPL interface
haskeline	0.7.5.0	Dependency of `ghci` executable
hpc	0.6.0.3	Dependency of `hpc` executable
integer-gmp	1.0.2.0	Core library
libiserv	8.8.4	Internal compiler library
mtl	2.2.2	Dependency of `Cabal` library
parsec	3.1.14.0	Dependency of `Cabal` library
pretty	1.1.3.6	Dependency of `ghc` library
process	1.6.9.0	Dependency of `ghc` library
stm	2.5.0.0	Dependency of `haskeline` library
template-haskell	2.15.0.0	Core library
terminfo	0.4.1.4	Dependency of `haskeline` library
text	1.2.4.0	Dependency of `Cabal` library
time	1.9.3	Dependency of `ghc` library
transformers	0.5.6.2	Dependency of `ghc` library
unix	2.7.2.2	Dependency of `ghc` library
xhtml	3000.2.2.1	Dependency of `haddock` executable

Glasgow Haskell Compiler User's Guide

Table of Contents

Previous topic

Next topic

This Page

3. Release notes for version 8.8.1¶

3.1. Highlights¶

3.2. Full details¶

3.2.1. Language¶

3.2.2. Compiler¶

3.2.3. LLVM backend¶

3.2.4. Runtime system¶

3.2.5. Template Haskell¶

3.2.6. `ghc-prim` library¶

3.2.7. `ghc` library¶

3.2.8. `base` library¶

3.2.9. Build system¶

3.3. Included libraries¶

Glasgow Haskell Compiler User's Guide

3. Release notes for version 8.8.1¶

3.1. Highlights¶

3.2. Full details¶

3.2.1. Language¶

3.2.2. Compiler¶

3.2.3. LLVM backend¶

3.2.4. Runtime system¶

3.2.5. Template Haskell¶

3.2.6. ghc-prim library¶

3.2.7. ghc library¶

3.2.8. base library¶

3.2.9. Build system¶

3.3. Included libraries¶

3.2.6. `ghc-prim` library¶

3.2.7. `ghc` library¶

3.2.8. `base` library¶