# 8. Profiling¶

GHC comes with a time and space profiling system, so that you can answer questions like “why is my program so slow?”, or “why is my program using so much memory?”.

Profiling a program is a three-step process:

1. Re-compile your program for profiling with the -prof option, and probably one of the options for adding automatic annotations: -fprof-auto is the most common [1].

If you are using external packages with cabal, you may need to reinstall these packages with profiling support; typically this is done with cabal install -p package --reinstall.

2. Having compiled the program for profiling, you now need to run it to generate the profile. For example, a simple time profile can be generated by running the program with +RTS -p (see -p), which generates a file named prog.prof where ⟨prog⟩ is the name of your program (without the .exe extension, if you are on Windows).

There are many different kinds of profile that can be generated, selected by different RTS options. We will be describing the various kinds of profile throughout the rest of this chapter. Some profiles require further processing using additional tools after running the program.

3. Examine the generated profiling information, use the information to optimise your program, and repeat as necessary.

## 8.1. Cost centres and cost-centre stacks¶

GHC’s profiling system assigns costs to cost centres. A cost is simply the time or space (memory) required to evaluate an expression. Cost centres are program annotations around expressions; all costs incurred by the annotated expression are assigned to the enclosing cost centre. Furthermore, GHC will remember the stack of enclosing cost centres for any given expression at run-time and generate a call-tree of cost attributions.

Let’s take a look at an example:

main = print (fib 30)
fib n = if n < 2 then 1 else fib (n-1) + fib (n-2)


Compile and run this program as follows:

$ghc -prof -fprof-auto -rtsopts Main.hs$ ./Main +RTS -p
121393
$ When a GHC-compiled program is run with the -p RTS option, it generates a file called prog.prof. In this case, the file will contain something like this:  Wed Oct 12 16:14 2011 Time and Allocation Profiling Report (Final) Main +RTS -p -RTS total time = 0.68 secs (34 ticks @ 20 ms) total alloc = 204,677,844 bytes (excludes profiling overheads) COST CENTRE MODULE %time %alloc fib Main 100.0 100.0 individual inherited COST CENTRE MODULE no. entries %time %alloc %time %alloc MAIN MAIN 102 0 0.0 0.0 100.0 100.0 CAF GHC.IO.Handle.FD 128 0 0.0 0.0 0.0 0.0 CAF GHC.IO.Encoding.Iconv 120 0 0.0 0.0 0.0 0.0 CAF GHC.Conc.Signal 110 0 0.0 0.0 0.0 0.0 CAF Main 108 0 0.0 0.0 100.0 100.0 main Main 204 1 0.0 0.0 100.0 100.0 fib Main 205 2692537 100.0 100.0 100.0 100.0  The first part of the file gives the program name and options, and the total time and total memory allocation measured during the run of the program (note that the total memory allocation figure isn’t the same as the amount of live memory needed by the program at any one time; the latter can be determined using heap profiling, which we will describe later in Profiling memory usage). The second part of the file is a break-down by cost centre of the most costly functions in the program. In this case, there was only one significant function in the program, namely fib, and it was responsible for 100% of both the time and allocation costs of the program. The third and final section of the file gives a profile break-down by cost-centre stack. This is roughly a call-tree profile of the program. In the example above, it is clear that the costly call to fib came from main. The time and allocation incurred by a given part of the program is displayed in two ways: “individual”, which are the costs incurred by the code covered by this cost centre stack alone, and “inherited”, which includes the costs incurred by all the children of this node. The usefulness of cost-centre stacks is better demonstrated by modifying the example slightly: main = print (f 30 + g 30) where f n = fib n g n = fib (n div 2) fib n = if n < 2 then 1 else fib (n-1) + fib (n-2)  Compile and run this program as before, and take a look at the new profiling results: COST CENTRE MODULE no. entries %time %alloc %time %alloc MAIN MAIN 102 0 0.0 0.0 100.0 100.0 CAF GHC.IO.Handle.FD 128 0 0.0 0.0 0.0 0.0 CAF GHC.IO.Encoding.Iconv 120 0 0.0 0.0 0.0 0.0 CAF GHC.Conc.Signal 110 0 0.0 0.0 0.0 0.0 CAF Main 108 0 0.0 0.0 100.0 100.0 main Main 204 1 0.0 0.0 100.0 100.0 main.g Main 207 1 0.0 0.0 0.0 0.1 fib Main 208 1973 0.0 0.1 0.0 0.1 main.f Main 205 1 0.0 0.0 100.0 99.9 fib Main 206 2692537 100.0 99.9 100.0 99.9  Now although we had two calls to fib in the program, it is immediately clear that it was the call from f which took all the time. The functions f and g which are defined in the where clause in main are given their own cost centres, main.f and main.g respectively. The actual meaning of the various columns in the output is: The number of times this particular point in the call tree was entered. The percentage of the total run time of the program spent at this point in the call tree. The percentage of the total memory allocations (excluding profiling overheads) of the program made by this call. The percentage of the total run time of the program spent below this point in the call tree. The percentage of the total memory allocations (excluding profiling overheads) of the program made by this call and all of its sub-calls. In addition you can use the -P RTS option to get the following additional information: ticks The raw number of time “ticks” which were attributed to this cost-centre; from this, we get the %time figure mentioned above. bytes Number of bytes allocated in the heap while in this cost-centre; again, this is the raw number from which we get the %alloc figure mentioned above. What about recursive functions, and mutually recursive groups of functions? Where are the costs attributed? Well, although GHC does keep information about which groups of functions called each other recursively, this information isn’t displayed in the basic time and allocation profile, instead the call-graph is flattened into a tree as follows: a call to a function that occurs elsewhere on the current stack does not push another entry on the stack, instead the costs for this call are aggregated into the caller [2]. ### 8.1.1. Inserting cost centres by hand¶ Cost centres are just program annotations. When you say -fprof-auto to the compiler, it automatically inserts a cost centre annotation around every binding not marked INLINE in your program, but you are entirely free to add cost centre annotations yourself. The syntax of a cost centre annotation for expressions is {-# SCC "name" #-} <expression>  where "name" is an arbitrary string, that will become the name of your cost centre as it appears in the profiling output, and <expression> is any Haskell expression. An SCC annotation extends as far to the right as possible when parsing, having the same precedence as lambda abstractions, let expressions, and conditionals. Additionally, an annotation may not appear in a position where it would change the grouping of subexpressions: a = 1 / 2 / 2 -- accepted (a=0.25) b = 1 / {-# SCC "name" #-} / 2 / 2 -- rejected (instead of b=1.0)  This restriction is required to maintain the property that inserting a pragma, just like inserting a comment, does not have unintended effects on the semantics of the program, in accordance with GHC Proposal #176. SCC stands for “Set Cost Centre”. The double quotes can be omitted if name is a Haskell identifier starting with a lowercase letter, for example: {-# SCC id #-} <expression>  Cost centre annotations can also appear in the top-level or in a declaration context. In that case you need to pass a function name defined in the same module or scope with the annotation. Example: f x y = ... where g z = ... {-# SCC g #-} {-# SCC f #-}  If you want to give a cost centre different name than the function name, you can pass a string to the annotation f x y = ... {-# SCC f "cost_centre_name" #-}  Here is an example of a program with a couple of SCCs: main :: IO () main = do let xs = [1..1000000] let ys = [1..2000000] print$ {-# SCC last_xs #-} last xs
print ${-# SCC last_init_xs #-} last (init xs) print$ {-# SCC last_ys #-} last ys
print ${-# SCC last_init_ys #-} last (init ys)  which gives this profile when run: COST CENTRE MODULE no. entries %time %alloc %time %alloc MAIN MAIN 102 0 0.0 0.0 100.0 100.0 CAF GHC.IO.Handle.FD 130 0 0.0 0.0 0.0 0.0 CAF GHC.IO.Encoding.Iconv 122 0 0.0 0.0 0.0 0.0 CAF GHC.Conc.Signal 111 0 0.0 0.0 0.0 0.0 CAF Main 108 0 0.0 0.0 100.0 100.0 main Main 204 1 0.0 0.0 100.0 100.0 last_init_ys Main 210 1 25.0 27.4 25.0 27.4 main.ys Main 209 1 25.0 39.2 25.0 39.2 last_ys Main 208 1 12.5 0.0 12.5 0.0 last_init_xs Main 207 1 12.5 13.7 12.5 13.7 main.xs Main 206 1 18.8 19.6 18.8 19.6 last_xs Main 205 1 6.2 0.0 6.2 0.0  ### 8.1.2. Rules for attributing costs¶ While running a program with profiling turned on, GHC maintains a cost-centre stack behind the scenes, and attributes any costs (memory allocation and time) to whatever the current cost-centre stack is at the time the cost is incurred. The mechanism is simple: whenever the program evaluates an expression with an SCC annotation, {-# SCC c -#} E, the cost centre c is pushed on the current stack, and the entry count for this stack is incremented by one. The stack also sometimes has to be saved and restored; in particular when the program creates a thunk (a lazy suspension), the current cost-centre stack is stored in the thunk, and restored when the thunk is evaluated. In this way, the cost-centre stack is independent of the actual evaluation order used by GHC at runtime. At a function call, GHC takes the stack stored in the function being called (which for a top-level function will be empty), and appends it to the current stack, ignoring any prefix that is identical to a prefix of the current stack. We mentioned earlier that lazy computations, i.e. thunks, capture the current stack when they are created, and restore this stack when they are evaluated. What about top-level thunks? They are “created” when the program is compiled, so what stack should we give them? The technical name for a top-level thunk is a CAF (“Constant Applicative Form”). GHC assigns every CAF in a module a stack consisting of the single cost centre M.CAF, where M is the name of the module. It is also possible to give each CAF a different stack, using the option -fprof-cafs. This is especially useful when compiling with -ffull-laziness (as is default with -O and higher), as constants in function bodies will be lifted to the top-level and become CAFs. You will probably need to consult the Core (-ddump-simpl) in order to determine what these CAFs correspond to. ## 8.2. Compiler options for profiling¶ -prof To make use of the profiling system all modules must be compiled and linked with the -prof option. Any SCC annotations you’ve put in your source will spring to life. Without a -prof option, your SCCs are ignored; so you can compile SCC-laden code without changing it. -fno-prof-count-entries Tells GHC not to collect information about how often functions are entered at runtime (the “entries” column of the time profile), for this module. This tends to make the profiled code run faster, and hence closer to the speed of the unprofiled code, because GHC is able to optimise more aggressively if it doesn’t have to maintain correct entry counts. This option can be useful if you aren’t interested in the entry counts (for example, if you only intend to do heap profiling). There are a few other profiling-related compilation options. Use them in addition to -prof. These do not have to be used consistently for all modules in a program. ### 8.2.1. Automatically placing cost-centres¶ GHC has a number of flags for automatically inserting cost-centres into the compiled program. -fprof-callers=⟨name⟩ Automatically enclose all occurrences of the named function in an SCC. Note that these cost-centres are added late in compilation (after simplification) and consequently the names may be slightly different than they appear in the source program (e.g. a call to f may inlined with its wrapper, resulting in an occurrence of its worker, $wf).

In addition to plain module-qualified names (e.g. GHC.Base.map), ⟨name⟩ also accepts a small globbing language using * as a wildcard symbol:

pattern    := <module> '.' <identifier>
module     := '*'
identifier := <ident_char>
ident


For instance, the following are all valid patterns:

• Data.List.map
• *.map
• *.parse*
• *.<\\*>

The * character can be used literally by escaping (e.g. \\*).

-fprof-auto

All bindings not marked INLINE, whether exported or not, top level or nested, will be given automatic SCC annotations. Functions marked INLINE must be given a cost centre manually.

-fprof-auto-top

GHC will automatically add SCC annotations for all top-level bindings not marked INLINE. If you want a cost centre on an INLINE function, you have to add it manually.

-fprof-auto-exported

GHC will automatically add SCC annotations for all exported functions not marked INLINE. If you want a cost centre on an INLINE function, you have to add it manually.

-fprof-auto-calls

Adds an automatic SCC annotation to all call sites. This is particularly useful when using profiling for the purposes of generating stack traces; see the function Debug.Trace.traceShow, or the -xc RTS flag (RTS options for hackers, debuggers, and over-interested souls) for more details.

-fprof-cafs

The costs of all CAFs in a module are usually attributed to one “big” CAF cost-centre. With this option, all CAFs get their own cost-centre. An “if all else fails” option…

-auto-all

Deprecated alias for -fprof-auto

-auto

Deprecated alias for -fprof-auto-exported

-caf-all

Deprecated alias for -fprof-cafs

-no-auto-all

Deprecated alias for -fno-prof-auto

-no-auto

Deprecated alias for -fno-prof-auto

-no-caf-all

Deprecated alias for -fno-prof-cafs

## 8.3. Time and allocation profiling¶

To generate a time and allocation profile, give one of the following RTS options to the compiled program when you run it (RTS options should be enclosed between +RTS ... -RTS as usual):

-p
-P
-pa

The -p option produces a standard time profile report. It is written into the file <stem>.prof; the stem is taken to be the program name by default, but can be overridden by the -po ⟨stem⟩ flag.

The -P option produces a more detailed report containing the actual time and allocation data as well. (Not used much.)

The -pa option produces the most detailed report containing all cost centres in addition to the actual time and allocation data.

-pj

The -pj option produces a time/allocation profile report in JSON format written into the file <program>.prof.

-po ⟨stem⟩

The -po ⟨stem⟩ option overrides the stem used to form the output file paths for the cost-centre profiler (see -p and -pj flags above) and heap profiler (see -h).

For instance, running a program with +RTS -h -p -pohello-world would produce a heap profile named hello-world.hp and a cost-centre profile named hello-world.prof.

-V ⟨secs⟩
 Default: 0.02

Sets the interval that the RTS clock ticks at, which is also the sampling interval of the time and allocation profile. The default is 0.02 seconds. The runtime uses a single timer signal to count ticks; this timer signal is used to control the context switch timer (Using Concurrent Haskell) and the heap profiling timer RTS options for heap profiling. Also, the time profiler uses the RTS timer signal directly to record time profiling samples.

Normally, setting the -V ⟨secs⟩ option directly is not necessary: the resolution of the RTS timer is adjusted automatically if a short interval is requested with the -C ⟨s⟩ or -i ⟨secs⟩ options. However, setting -V ⟨secs⟩ is required in order to increase the resolution of the time profiler.

Using a value of zero disables the RTS clock completely, and has the effect of disabling timers that depend on it: the context switch timer and the heap profiling timer. Context switches will still happen, but deterministically and at a rate much faster than normal. Disabling the interval timer is useful for debugging, because it eliminates a source of non-determinism at runtime.

-xc

This option causes the runtime to print out the current cost-centre stack whenever an exception is raised. This can be particularly useful for debugging the location of exceptions, such as the notorious Prelude.head: empty list error. See RTS options for hackers, debuggers, and over-interested souls.

### 8.3.1. JSON profile format¶

When invoked with the -pj flag the runtime will emit the cost-centre profile in a machine-readable JSON format. The top-level object of this format has the following properties,

program (string)
The name of the program
arguments (list of strings)
The command line arguments passed to the program
rts_arguments (list of strings)
The command line arguments passed to the runtime system
initial_capabilities (integral number)
How many capabilities the program was started with (e.g. using the -N ⟨x⟩ option). Note that the number of capabilities may change during execution due to the setNumCapabilities function.
total_time (number)
The total wall time of the program’s execution in seconds.
total_ticks (integral number)
How many profiler “ticks” elapsed over the course of the program’s execution.
end_time (number)
The approximate time when the program finished execution as a UNIX epoch timestamp.
tick_interval (float)
How much time between profiler ticks.
total_alloc (integer)
The cumulative allocations of the program in bytes.
cost_centres (list of objects)
A list of the program’s cost centres
profile (object)
The profile tree itself

Each entry in cost_centres is an object describing a cost-centre of the program having the following properties,

id (integral number)
A unique identifier used to refer to the cost-centre
is_caf (boolean)
Whether the cost-centre is a Constant Applicative Form (CAF)
label (string)
A descriptive string roughly identifying the cost-centre.
src_loc (string)
A string describing the source span enclosing the cost-centre.

The profile data itself is described by the profile field, which contains a tree-like object (which we’ll call a “cost-centre stack” here) with the following properties,

id (integral number)
The id of a cost-centre listed in the cost_centres list.
entries (integral number)
ticks (integral number)
How many ticks was the program’s execution inside of this cost-centre? This does not include child cost-centres.
alloc (integral number)
How many bytes did the program allocate while inside of this cost-centre? This does not include allocations while in child cost-centres.
children (list)
A list containing child cost-centre stacks.

For instance, a simple profile might look like this,

{
"program": "Main",
"arguments": [
"nofib/shootout/n-body/Main",
"50000"
],
"rts_arguments": [
"-pj",
"-hy"
],
"end_time": "Thu Feb 23 17:15 2017",
"initial_capabilities": 0,
"total_time": 1.7,
"total_ticks": 1700,
"tick_interval": 1000,
"total_alloc": 3770785728,
"cost_centres": [
{
"id": 168,
"label": "IDLE",
"module": "IDLE",
"src_loc": "<built-in>",
"is_caf": false
},
{
"id": 156,
"label": "CAF",
"module": "GHC.Integer.Logarithms.Internals",
"src_loc": "<entire-module>",
"is_caf": true
},
{
"id": 155,
"label": "CAF",
"module": "GHC.Integer.Logarithms",
"src_loc": "<entire-module>",
"is_caf": true
},
{
"id": 154,
"label": "CAF",
"module": "GHC.Event.Array",
"src_loc": "<entire-module>",
"is_caf": true
}
],
"profile": {
"id": 162,
"entries": 0,
"alloc": 688,
"ticks": 0,
"children": [
{
"id": 1,
"entries": 0,
"alloc": 208,
"ticks": 0,
"children": [
{
"id": 22,
"entries": 1,
"alloc": 80,
"ticks": 0,
"children": []
}
]
},
{
"id": 42,
"entries": 1,
"alloc": 1632,
"ticks": 0,
"children": []
}
]
}
}


## 8.4. Profiling memory usage¶

In addition to profiling the time and allocation behaviour of your program, you can also generate a graph of its memory usage over time. This is useful for detecting the causes of space leaks, when your program holds on to more memory at run-time that it needs to. Space leaks lead to slower execution due to heavy garbage collector activity, and may even cause the program to run out of memory altogether.

To generate a heap profile from your program:

1. Compile the program for profiling (Compiler options for profiling).

2. Run it with one of the heap profiling options described below (eg. -hc for a basic producer profile). This generates the file prog.hp.

If the event log is enabled (with the -l ⟨flags⟩ runtime system flag) heap samples will additionally be emitted to the GHC event log (see Heap profiler event log output for details about event format).

3. Run hp2ps to produce a Postscript file, prog.ps. The hp2ps utility is described in detail in hp2ps – Rendering heap profiles to PostScript.

4. Display the heap profile using a postscript viewer such as Ghostview, or print it out on a Postscript-capable printer.

For example, here is a heap profile produced for the sphere program from GHC’s nofib benchmark suite,

You might also want to take a look at hp2any, a more advanced suite of tools (not distributed with GHC) for displaying heap profiles.

### 8.4.1. RTS options for heap profiling¶

There are several different kinds of heap profile that can be generated. All the different profile types yield a graph of live heap against time, but they differ in how the live heap is broken down into bands. The following RTS options select which break-down to use:

-hT

Breaks down the graph by heap closure type.

-hc
-h

Requires -prof. Breaks down the graph by the cost-centre stack which produced the data.

Note

The meaning of the shortened -h is dependent on whether your program was compiled for profiling. When compiled for profiling, -h is equivalent to -hc, but otherwise is equivalent to -hT (see RTS options for profiling). The -h is deprecated and will be removed in a future release.

-hm

Requires -prof. Break down the live heap by the module containing the code which produced the data.

-hd

Requires -prof. Breaks down the graph by closure description. For actual data, the description is just the constructor name, for other closures it is a compiler-generated string identifying the closure.

-hy

Requires -prof. Breaks down the graph by type. For closures which have function type or unknown/polymorphic type, the string will represent an approximation to the actual type.

-hr

Requires -prof. Break down the graph by retainer set. Retainer profiling is described in more detail below (Retainer Profiling).

-hb

Requires -prof. Break down the graph by biography. Biographical profiling is described in more detail below (Biographical Profiling).

-hi

Break down the graph by the address of the info table of a closure. For this to produce useful output the program must have been compiled with -finfo-table-map.

-l

Emit profile samples to the GHC event log. This format is both more expressive than the old .hp format and can be correlated with other events over the program’s runtime. See Heap profiler event log output for details on the produced event structure.

In addition, the profile can be restricted to heap data which satisfies certain criteria - for example, you might want to display a profile by type but only for data produced by a certain module, or a profile by retainer for a certain type of data. Restrictions are specified as follows:

-hc ⟨name⟩

Restrict the profile to closures produced by cost-centre stacks with one of the specified cost centres at the top.

-hC ⟨name⟩

Restrict the profile to closures produced by cost-centre stacks with one of the specified cost centres anywhere in the stack.

-hm ⟨module⟩

Restrict the profile to closures produced by the specified modules.

-hd ⟨desc⟩

Restrict the profile to closures with the specified description strings.

-hy ⟨type⟩

Restrict the profile to closures with the specified types.

-hr ⟨cc⟩

Restrict the profile to closures with retainer sets containing cost-centre stacks with one of the specified cost centres at the top.

-hb ⟨bio⟩

Restrict the profile to closures with one of the specified biographies, where ⟨bio⟩ is one of lag, drag, void, or use.

For example, the following options will generate a retainer profile restricted to Branch and Leaf constructors:

prog +RTS -hr -hdBranch,Leaf


There can only be one “break-down” option (eg. -hr in the example above), but there is no limit on the number of further restrictions that may be applied. All the options may be combined, with one exception: GHC doesn’t currently support mixing the -hr and -hb options.

There are three more options which relate to heap profiling:

-i ⟨secs⟩

Set the profiling (sampling) interval to ⟨secs⟩ seconds (the default is 0.1 second). Fractions are allowed: for example -i0.2 will get 5 samples per second. This only affects heap profiling; time profiles are always sampled with the frequency of the RTS clock. See Time and allocation profiling for changing that.

--no-automatic-heap-samples
Since: 9.2.1

Don’t start heap profiling from the start of program execution. If this option is enabled, it’s expected that the user will manually start heap profiling or request specific samples using functions from GHC.Profiling.

-L ⟨num⟩

Sets the maximum length of a cost-centre stack name in a heap profile. Defaults to 25.

### 8.4.2. Retainer Profiling¶

Retainer profiling is designed to help answer questions like “why is this data being retained?”. We start by defining what we mean by a retainer:

A retainer is either the system stack, an unevaluated closure (thunk), or an explicitly mutable object.

In particular, constructors are not retainers.

An object B retains object A if (i) B is a retainer object and (ii) object A can be reached by recursively following pointers starting from object B, but not meeting any other retainer objects on the way. Each live object is retained by one or more retainer objects, collectively called its retainer set, or its retainer set, or its retainers.

When retainer profiling is requested by giving the program the -hr option, a graph is generated which is broken down by retainer set. A retainer set is displayed as a set of cost-centre stacks; because this is usually too large to fit on the profile graph, each retainer set is numbered and shown abbreviated on the graph along with its number, and the full list of retainer sets is dumped into the file prog.prof.

Retainer profiling requires multiple passes over the live heap in order to discover the full retainer set for each object, which can be quite slow. So we set a limit on the maximum size of a retainer set, where all retainer sets larger than the maximum retainer set size are replaced by the special set MANY. The maximum set size defaults to 8 and can be altered with the -R ⟨size⟩ RTS option:

-R ⟨size⟩

Restrict the number of elements in a retainer set to ⟨size⟩ (default 8).

#### 8.4.2.1. Hints for using retainer profiling¶

The definition of retainers is designed to reflect a common cause of space leaks: a large structure is retained by an unevaluated computation, and will be released once the computation is forced. A good example is looking up a value in a finite map, where unless the lookup is forced in a timely manner the unevaluated lookup will cause the whole mapping to be retained. These kind of space leaks can often be eliminated by forcing the relevant computations to be performed eagerly, using seq or strictness annotations on data constructor fields.

Often a particular data structure is being retained by a chain of unevaluated closures, only the nearest of which will be reported by retainer profiling - for example A retains B, B retains C, and C retains a large structure. There might be a large number of Bs but only a single A, so A is really the one we’re interested in eliminating. However, retainer profiling will in this case report B as the retainer of the large structure. To move further up the chain of retainers, we can ask for another retainer profile but this time restrict the profile to B objects, so we get a profile of the retainers of B:

prog +RTS -hr -hcB


This trick isn’t foolproof, because there might be other B closures in the heap which aren’t the retainers we are interested in, but we’ve found this to be a useful technique in most cases.

### 8.4.3. Biographical Profiling¶

A typical heap object may be in one of the following four states at each point in its lifetime:

• The lag stage, which is the time between creation and the first use of the object,
• the use stage, which lasts from the first use until the last use of the object, and
• The drag stage, which lasts from the final use until the last reference to the object is dropped.
• An object which is never used is said to be in the void state for its whole lifetime.

A biographical heap profile displays the portion of the live heap in each of the four states listed above. Usually the most interesting states are the void and drag states: live heap in these states is more likely to be wasted space than heap in the lag or use states.

It is also possible to break down the heap in one or more of these states by a different criteria, by restricting a profile by biography. For example, to show the portion of the heap in the drag or void state by producer:

prog +RTS -hc -hbdrag,void


Once you know the producer or the type of the heap in the drag or void states, the next step is usually to find the retainer(s):

prog +RTS -hr -hccc...


Note

This two stage process is required because GHC cannot currently profile using both biographical and retainer information simultaneously.

### 8.4.4. Actual memory residency¶

How does the heap residency reported by the heap profiler relate to the actual memory residency of your program when you run it? You might see a large discrepancy between the residency reported by the heap profiler, and the residency reported by tools on your system (eg. ps or top on Unix, or the Task Manager on Windows). There are several reasons for this:

• There is an overhead of profiling itself, which is subtracted from the residency figures by the profiler. This overhead goes away when compiling without profiling support, of course. The space overhead is currently 2 extra words per heap object, which probably results in about a 30% overhead.
• Garbage collection requires more memory than the actual residency. The factor depends on the kind of garbage collection algorithm in use: a major GC in the standard generation copying collector will usually require $$3L$$ bytes of memory, where $$L$$ is the amount of live data. This is because by default (see the RTS -F ⟨factor⟩ option) we allow the old generation to grow to twice its size ($$2L$$) before collecting it, and we require additionally $$L$$ bytes to copy the live data into. When using compacting collection (see the -c option), this is reduced to $$2L$$, and can further be reduced by tweaking the -F ⟨factor⟩ option. Also add the size of the allocation area (see -A ⟨size⟩).
• The program text itself, the C stack, any non-heap data (e.g. data allocated by foreign libraries, and data allocated by the RTS), and mmap()‘d memory are not counted in the heap profile.

## 8.5. hp2ps – Rendering heap profiles to PostScript¶

Usage:

hp2ps [flags] [<file>[.hp]]


The program hp2ps program converts a .hp file produced by the -h<break-down> runtime option into a PostScript graph of the heap profile. By convention, the file to be processed by hp2ps has a .hp extension. The PostScript output is written to file@.ps. If <file> is omitted entirely, then the program behaves as a filter.

hp2ps is distributed in ghc/utils/hp2ps in a GHC source distribution. It was originally developed by Dave Wakeling as part of the HBC/LML heap profiler.

The flags are:

-d

In order to make graphs more readable, hp2ps sorts the shaded bands for each identifier. The default sort ordering is for the bands with the largest area to be stacked on top of the smaller ones. The -d option causes rougher bands (those representing series of values with the largest standard deviations) to be stacked on top of smoother ones.

-b

Normally, hp2ps puts the title of the graph in a small box at the top of the page. However, if the JOB string is too long to fit in a small box (more than 35 characters), then hp2ps will choose to use a big box instead. The -b option forces hp2ps to use a big box.

-e⟨float⟩[in|mm|pt]

Generate encapsulated PostScript suitable for inclusion in LaTeX documents. Usually, the PostScript graph is drawn in landscape mode in an area 9 inches wide by 6 inches high, and hp2ps arranges for this area to be approximately centred on a sheet of a4 paper. This format is convenient of studying the graph in detail, but it is unsuitable for inclusion in LaTeX documents. The -e option causes the graph to be drawn in portrait mode, with float specifying the width in inches, millimetres or points (the default). The resulting PostScript file conforms to the Encapsulated PostScript (EPS) convention, and it can be included in a LaTeX document using Rokicki’s dvi-to-PostScript converter dvips.

-g

Create output suitable for the gs PostScript previewer (or similar). In this case the graph is printed in portrait mode without scaling. The output is unsuitable for a laser printer.

-l

Normally a profile is limited to 20 bands with additional identifiers being grouped into an OTHER band. The -l flag removes this 20 band and limit, producing as many bands as necessary. No key is produced as it won’t fit!. It is useful for creation time profiles with many bands.

-m⟨int⟩

Normally a profile is limited to 20 bands with additional identifiers being grouped into an OTHER band. The -m flag specifies an alternative band limit (the maximum is 20).

-m0 requests the band limit to be removed. As many bands as necessary are produced. However no key is produced as it won’t fit! It is useful for displaying creation time profiles with many bands.

-p

Use previous parameters. By default, the PostScript graph is automatically scaled both horizontally and vertically so that it fills the page. However, when preparing a series of graphs for use in a presentation, it is often useful to draw a new graph using the same scale, shading and ordering as a previous one. The -p flag causes the graph to be drawn using the parameters determined by a previous run of hp2ps on file. These are extracted from file@.aux.

-s

Use a small box for the title.

-t⟨float⟩

Normally trace elements which sum to a total of less than 1% of the profile are removed from the profile. The -t option allows this percentage to be modified (maximum 5%).

-t0 requests no trace elements to be removed from the profile, ensuring that all the data will be displayed.

-c

Generate colour output.

-y

Ignore marks.

-?

Print out usage information.

### 8.5.1. Manipulating the hp file¶

(Notes kindly offered by Jan-Willem Maessen.)

The FOO.hp file produced when you ask for the heap profile of a program FOO is a text file with a particularly simple structure. Here’s a representative example, with much of the actual data omitted:

JOB "FOO -hC"
DATE "Thu Dec 26 18:17 2002"
SAMPLE_UNIT "seconds"
VALUE_UNIT "bytes"
BEGIN_SAMPLE 0.00
END_SAMPLE 0.00
BEGIN_SAMPLE 15.07
... sample data ...
END_SAMPLE 15.07
BEGIN_SAMPLE 30.23
... sample data ...
END_SAMPLE 30.23
... etc.
BEGIN_SAMPLE 11695.47
END_SAMPLE 11695.47


The first four lines (JOB, DATE, SAMPLE_UNIT, VALUE_UNIT) form a header. Each block of lines starting with BEGIN_SAMPLE and ending with END_SAMPLE forms a single sample (you can think of this as a vertical slice of your heap profile). The hp2ps utility should accept any input with a properly-formatted header followed by a series of complete samples.

### 8.5.2. Zooming in on regions of your profile¶

You can look at particular regions of your profile simply by loading a copy of the .hp file into a text editor and deleting the unwanted samples. The resulting .hp file can be run through hp2ps and viewed or printed.

### 8.5.3. Viewing the heap profile of a running program¶

The .hp file is generated incrementally as your program runs. In principle, running hp2ps on the incomplete file should produce a snapshot of your program’s heap usage. However, the last sample in the file may be incomplete, causing hp2ps to fail. If you are using a machine with UNIX utilities installed, it’s not too hard to work around this problem (though the resulting command line looks rather Byzantine):

head -fgrep -n END_SAMPLE FOO.hp | tail -1 | cut -d : -f 1 FOO.hp \
| hp2ps > FOO.ps


The command fgrep -n END_SAMPLE FOO.hp finds the end of every complete sample in FOO.hp, and labels each sample with its ending line number. We then select the line number of the last complete sample using tail and cut. This is used as a parameter to head; the result is as if we deleted the final incomplete sample from FOO.hp. This results in a properly-formatted .hp file which we feed directly to hp2ps.

### 8.5.4. Viewing a heap profile in real time¶

The gv and ghostview programs have a “watch file” option can be used to view an up-to-date heap profile of your program as it runs. Simply generate an incremental heap profile as described in the previous section. Run gv on your profile:

gv -watch -orientation=seascape FOO.ps


If you forget the -watch flag you can still select “Watch file” from the “State” menu. Now each time you generate a new profile FOO.ps the view will update automatically.

This can all be encapsulated in a little script:

#!/bin/sh
head -fgrep -n END_SAMPLE FOO.hp | tail -1 | cut -d : -f 1 FOO.hp \
| hp2ps > FOO.ps
gv -watch -orientation=seascape FOO.ps &
while [ 1 ] ; do
sleep 10 # We generate a new profile every 10 seconds.
head -fgrep -n END_SAMPLE FOO.hp | tail -1 | cut -d : -f 1 FOO.hp \
| hp2ps > FOO.ps
done


Occasionally gv will choke as it tries to read an incomplete copy of FOO.ps (because hp2ps is still running as an update occurs). A slightly more complicated script works around this problem, by using the fact that sending a SIGHUP to gv will cause it to re-read its input file:

#!/bin/sh
head -fgrep -n END_SAMPLE FOO.hp | tail -1 | cut -d : -f 1 FOO.hp \
| hp2ps > FOO.ps
gv FOO.ps &
gvpsnum=$! while [ 1 ] ; do sleep 10 head -fgrep -n END_SAMPLE FOO.hp | tail -1 | cut -d : -f 1 FOO.hp \ | hp2ps > FOO.ps kill -HUP$gvpsnum
done


## 8.6. Profiling Parallel and Concurrent Programs¶

Combining -threaded and -prof is perfectly fine, and indeed it is possible to profile a program running on multiple processors with the RTS -N ⟨x⟩ option. [3]

Some caveats apply, however. In the current implementation, a profiled program is likely to scale much less well than the unprofiled program, because the profiling implementation uses some shared data structures which require locking in the runtime system. Furthermore, the memory allocation statistics collected by the profiled program are stored in shared memory but not locked (for speed), which means that these figures might be inaccurate for parallel programs.

We strongly recommend that you use -fno-prof-count-entries when compiling a program to be profiled on multiple cores, because the entry counts are also stored in shared memory, and continuously updating them on multiple cores is extremely slow.

We also recommend using ThreadScope for profiling parallel programs; it offers a GUI for visualising parallel execution, and is complementary to the time and space profiling features provided with GHC.

## 8.7. Observing Code Coverage¶

Code coverage tools allow a programmer to determine what parts of their code have been actually executed, and which parts have never actually been invoked. GHC has an option for generating instrumented code that records code coverage as part of the Haskell Program Coverage (HPC) toolkit, which is included with GHC. HPC tools can be used to render the generated code coverage information into human understandable format.

Correctly instrumented code provides coverage information of two kinds: source coverage and boolean-control coverage. Source coverage is the extent to which every part of the program was used, measured at three different levels: declarations (both top-level and local), alternatives (among several equations or case branches) and expressions (at every level). Boolean coverage is the extent to which each of the values True and False is obtained in every syntactic boolean context (ie. guard, condition, qualifier).

HPC displays both kinds of information in two primary ways: textual reports with summary statistics (hpc report) and sources with color mark-up (hpc markup). For boolean coverage, there are four possible outcomes for each guard, condition or qualifier: both True and False values occur; only True; only False; never evaluated. In hpc-markup output, highlighting with a yellow background indicates a part of the program that was never evaluated; a green background indicates an always-True expression and a red background indicates an always-False one.

### 8.7.1. A small example: Reciprocation¶

For an example we have a program, called Recip.hs, which computes exact decimal representations of reciprocals, with recurring parts indicated in brackets.

reciprocal :: Int -> (String, Int)
reciprocal n | n > 1 = ('0' : '.' : digits, recur)
| otherwise = error
"attempting to compute reciprocal of number <= 1"
where
(digits, recur) = divide n 1 []
divide :: Int -> Int -> [Int] -> (String, Int)
divide n c cs | c elem cs = ([], position c cs)
| r == 0      = (show q, 0)
| r /= 0      = (show q ++ digits, recur)
where
(q, r) = (c*10) quotRem n
(digits, recur) = divide n r (c:cs)

position :: Int -> [Int] -> Int
position n (x:xs) | n==x      = 1
| otherwise = 1 + position n xs

showRecip :: Int -> String
showRecip n =
"1/" ++ show n ++ " = " ++
if r==0 then d else take p d ++ "(" ++ drop p d ++ ")"
where
p = length d - r
(d, r) = reciprocal n

main = do
putStrLn (showRecip number)
main


HPC instrumentation is enabled with the -fhpc flag:

$ghc -fhpc Recip.hs  GHC creates a subdirectory .hpc in the current directory, and puts HPC index (.mix) files in there, one for each module compiled. You don’t need to worry about these files: they contain information needed by the hpc tool to generate the coverage data for compiled modules after the program is run. $ ./Recip
1/3
= 0.(3)


Running the program generates a file with the .tix suffix, in this case Recip.tix, which contains the coverage data for this run of the program. The program may be run multiple times (e.g. with different test data), and the coverage data from the separate runs is accumulated in the .tix file. To reset the coverage data and start again, just remove the .tix file. You can control where the .tix file is generated using the environment variable HPCTIXFILE.

HPCTIXFILE

Set the HPC .tix file output path.

Having run the program, we can generate a textual summary of coverage:

$hpc report Recip 80% expressions used (81/101) 12% boolean coverage (1/8) 14% guards (1/7), 3 always True, 1 always False, 2 unevaluated 0% 'if' conditions (0/1), 1 always False 100% qualifiers (0/0) 55% alternatives used (5/9) 100% local declarations used (9/9) 100% top-level declarations used (5/5)  We can also generate a marked-up version of the source. $ hpc markup Recip
writing Recip.hs.html


This generates one file per Haskell module, and 4 index files, hpc_index.html, hpc_index_alt.html, hpc_index_exp.html, hpc_index_fun.html.

### 8.7.2. Options for instrumenting code for coverage¶

-fhpc

Enable code coverage for the current module or modules being compiled.

Modules compiled with this option can be freely mixed with modules compiled without it; indeed, most libraries will typically be compiled without -fhpc. When the program is run, coverage data will only be generated for those modules that were compiled with -fhpc, and the hpc tool will only show information about those modules.

### 8.7.3. The hpc toolkit¶

The hpc command has several sub-commands:

$hpc Usage: hpc COMMAND ... Commands: help Display help for hpc or a single command Reporting Coverage: report Output textual report about program coverage markup Markup Haskell source with program coverage Processing Coverage files: sum Sum multiple .tix files in a single .tix file combine Combine two .tix files in a single .tix file map Map a function over a single .tix file Coverage Overlays: overlay Generate a .tix file from an overlay file draft Generate draft overlay that provides 100% coverage Others: show Show .tix file in readable, verbose format version Display version for hpc  In general, these options act on a .tix file after an instrumented binary has generated it. The hpc tool assumes you are in the top-level directory of the location where you built your application, and the .tix file is in the same top-level directory. You can use the flag --srcdir to use hpc for any other directory, and use --srcdir multiple times to analyse programs compiled from difference locations, as is typical for packages. We now explain in more details the major modes of hpc. #### 8.7.3.1. hpc report¶ hpc report gives a textual report of coverage. By default, all modules and packages are considered in generating report, unless include or exclude are used. The report is a summary unless the --per-module flag is used. The --xml-output option allows for tools to use hpc to glean coverage. $ hpc help report
Usage: hpc report [OPTION] .. <TIX_FILE> [<MODULE> [<MODULE> ..]]

Options:

--per-module                  show module level detail
--decl-list                   show unused decls
--exclude=[PACKAGE:][MODULE]  exclude MODULE and/or PACKAGE
--include=[PACKAGE:][MODULE]  include MODULE and/or PACKAGE
--srcdir=DIR                  path to source directory of .hs files
multi-use of srcdir possible
--hpcdir=DIR                  append sub-directory that contains .mix files
default .hpc [rarely used]
--reset-hpcdirs               empty the list of hpcdir's
[rarely used]
--xml-output                  show output in XML


#### 8.7.3.2. hpc markup¶

hpc markup marks up source files into colored html.

$hpc help markup Usage: hpc markup [OPTION] .. <TIX_FILE> [<MODULE> [<MODULE> ..]] Options: --exclude=[PACKAGE:][MODULE] exclude MODULE and/or PACKAGE --include=[PACKAGE:][MODULE] include MODULE and/or PACKAGE --srcdir=DIR path to source directory of .hs files multi-use of srcdir possible --hpcdir=DIR append sub-directory that contains .mix files default .hpc [rarely used] --reset-hpcdirs empty the list of hpcdir's [rarely used] --fun-entry-count show top-level function entry counts --highlight-covered highlight covered code, rather that code gaps --destdir=DIR path to write output to  #### 8.7.3.3. hpc sum¶ hpc sum adds together any number of .tix files into a single .tix file. hpc sum does not change the original .tix file; it generates a new .tix file. $ hpc help sum
Usage: hpc sum [OPTION] .. <TIX_FILE> [<TIX_FILE> [<TIX_FILE> ..]]
Sum multiple .tix files in a single .tix file

Options:

--exclude=[PACKAGE:][MODULE]  exclude MODULE and/or PACKAGE
--include=[PACKAGE:][MODULE]  include MODULE and/or PACKAGE
--output=FILE                 output FILE
--union                       use the union of the module namespace (default is intersection)


#### 8.7.3.4. hpc combine¶

hpc combine is the swiss army knife of hpc. It can be used to take the difference between .tix files, to subtract one .tix file from another, or to add two .tix files. hpc combine does not change the original .tix file; it generates a new .tix file.

$hpc help combine Usage: hpc combine [OPTION] .. <TIX_FILE> <TIX_FILE> Combine two .tix files in a single .tix file Options: --exclude=[PACKAGE:][MODULE] exclude MODULE and/or PACKAGE --include=[PACKAGE:][MODULE] include MODULE and/or PACKAGE --output=FILE output FILE --function=FUNCTION combine .tix files with join function, default = ADD FUNCTION = ADD | DIFF | SUB --union use the union of the module namespace (default is intersection)  #### 8.7.3.5. hpc map¶ hpc map inverts or zeros a .tix file. hpc map does not change the original .tix file; it generates a new .tix file. $ hpc help map
Usage: hpc map [OPTION] .. <TIX_FILE>
Map a function over a single .tix file

Options:

--exclude=[PACKAGE:][MODULE]  exclude MODULE and/or PACKAGE
--include=[PACKAGE:][MODULE]  include MODULE and/or PACKAGE
--output=FILE                 output FILE
--function=FUNCTION           apply function to .tix files, default = ID
FUNCTION = ID | INV | ZERO
--union                       use the union of the module namespace (default is intersection)


#### 8.7.3.6. hpc overlay and hpc draft¶

Overlays are an experimental feature of HPC, a textual description of coverage. hpc draft is used to generate a draft overlay from a .tix file, and hpc overlay generates a .tix files from an overlay.

% hpc help overlay
Usage: hpc overlay [OPTION] .. <OVERLAY_FILE> [<OVERLAY_FILE> [...]]

Options:

--srcdir=DIR   path to source directory of .hs files
multi-use of srcdir possible
--hpcdir=DIR                  append sub-directory that contains .mix files
default .hpc [rarely used]
--reset-hpcdirs               empty the list of hpcdir's
[rarely used]
--output=FILE  output FILE
% hpc help draft
Usage: hpc draft [OPTION] .. <TIX_FILE>

Options:

--exclude=[PACKAGE:][MODULE]  exclude MODULE and/or PACKAGE
--include=[PACKAGE:][MODULE]  include MODULE and/or PACKAGE
--srcdir=DIR                  path to source directory of .hs files
multi-use of srcdir possible
--hpcdir=DIR                  append sub-directory that contains .mix files
default .hpc [rarely used]
--reset-hpcdirs               empty the list of hpcdir's
[rarely used]
--output=FILE                 output FILE


### 8.7.4. Caveats and Shortcomings of Haskell Program Coverage¶

HPC does not attempt to lock the .tix file, so multiple concurrently running binaries in the same directory will exhibit a race condition. At compile time, there is no way to change the name of the .tix file generated; at runtime, the name of the generated .tix file can be changed using HPCTIXFILE; the name of the .tix file will also change if you rename the binary. HPC does not work with GHCi.

## 8.8. Using “ticky-ticky” profiling (for implementors)¶

-ticky

Enable ticky-ticky profiling. By default this only tracks the allocations by each closure type. See -ticky-allocd to keep track of allocations of each closure type as well.

-ticky-allocd

Keep track of how much each closure type is allocated.

-ticky-dyn-thunk

Track allocations of dynamic thunks.

Because ticky-ticky profiling requires a certain familiarity with GHC internals, we have moved the documentation to the GHC developers wiki. Take a look at its overview of the profiling options, which includes a link to the ticky-ticky profiling page.

 [1] -fprof-auto was known as -auto-all prior to GHC 7.4.1.
 [2] Note that this policy has changed slightly in GHC 7.4.1 relative to earlier versions, and may yet change further, feedback is welcome.
 [3] This feature was added in GHC 7.4.1.