Creating a package

Suppose you have a directory hierarchy containing the source files that make up your package. You will need to add two more files to the root directory of the package:

package.cabal

a Unicode UTF-8 text file containing a package description (for details of the syntax of this file, see the section called “Package descriptions”)

Setup.hs or Setup.lhs

a single-module Haskell program to perform various setup tasks (with the interface described in the section called “Building and installing a package”). This module should import only modules that will be present in all Haskell implementations, including modules of the Cabal library. In most cases it will be trivial, calling on the Cabal library to do most of the work.

Once you have these, you can create a source bundle of this directory for distribution. Building of the package is discussed in the section called “Building and installing a package”.

Example 1. A package containing a simple library

The HUnit package contains a file HUnit.cabal containing:

Name:		HUnit
Version:	1.1.1
Cabal-Version:  >= 1.2
License:	BSD3
License-File:	LICENSE
Author:		Dean Herington
Homepage:	http://hunit.sourceforge.net/
Category:	Testing
Synopsis:	A unit testing framework for Haskell

Library
  Build-Depends:	base
  Exposed-modules:
    Test.HUnit.Base, Test.HUnit.Lang, Test.HUnit.Terminal,
    Test.HUnit.Text, Test.HUnit
  Extensions:	CPP

and the following Setup.hs:

import Distribution.Simple
main = defaultMain

Example 2. A package containing executable programs

Name:           TestPackage
Version:        0.0
Cabal-Version:  >= 1.2
License:        BSD3
Author:         Angela Author
Synopsis:       Small package with two programs
Build-Type:     Simple

Executable program1
  Build-Depends:  HUnit
  Main-Is:        Main.hs
  Hs-Source-Dirs: prog1

Executable program2
  Main-Is:        Main.hs
  Build-Depends:  HUnit
  Hs-Source-Dirs: prog2
  Other-Modules:  Utils

with Setup.hs the same as above.


Example 3. A package containing a library and executable programs

Name:            TestPackage
Version:         0.0
Cabal-Version:   >= 1.2
License:         BSD3
Author:          Angela Author
Synopsis:        Package with library and two programs
Build-Type:      Simple

Library
  Build-Depends:   HUnit
  Exposed-Modules: A, B, C

Executable program1
  Main-Is:         Main.hs
  Hs-Source-Dirs:  prog1
  Other-Modules:   A, B

Executable program2
  Main-Is:         Main.hs
  Hs-Source-Dirs:  prog2
  Other-Modules:   A, C, Utils

with Setup.hs the same as above. Note that any library modules required (directly or indirectly) by an executable must be listed again.


The trivial setup script used in these examples uses the simple build infrastructure provided by the Cabal library (see Distribution.Simple). The simplicity lies in its interface rather that its implementation. It automatically handles preprocessing with standard preprocessors, and builds packages for all the Haskell implementations (except nhc98, for now).

The simple build infrastructure can also handle packages where building is governed by system-dependent parameters, if you specify a little more (see the section called “System-dependent parameters”). A few packages require more elaborate solutions (see the section called “More complex packages”).

Package descriptions

The package description file must have a name ending in “.cabal”. It must be a Unicode text file encoded using valid UTF-8. There must be exactly one such file in the directory. The first part of the name is usually the package name, and some of the tools that operate on Cabal packages require this.

In the package description file, lines whose first non-whitespace characters are “--” are treated as comments and ignored.

This file should contain of a number global property descriptions and several sections.

Each section consists of a number of property descriptions in the form of field/value pairs, with a syntax roughly like mail message headers.

  • Case is not significant in field names, but is significant in field values.

  • To continue a field value, indent the next line relative to the field name.

  • Field names may be indented, but all field values in the same section must use the same indentation.

  • Tabs are not allowed as indentation characters due to a missing standard interpretation of tab width.

  • To get a blank line in a field value, use an indented “.

The syntax of the value depends on the field. Field types include:

token , filename , directory

Either a sequence of one or more non-space non-comma characters, or a quoted string in Haskell 98 lexical syntax. Unless otherwise stated, relative filenames and directories are interpreted from the package root directory.

freeform , URL , address

An arbitrary, uninterpreted string.

identifier

A letter followed by zero or more alphanumerics or underscores.

Modules and preprocessors

Haskell module names listed in the exposed-modules and other-modules fields may correspond to Haskell source files, i.e. with names ending in “.hs” or “.lhs”, or to inputs for various Haskell preprocessors. The simple build infrastructure understands the extensions “.gc” (greencard), “.chs” (c2hs), “.hsc” (hsc2hs), “.y” and “.ly” (happy), “.x” (alex) and “.cpphs” (cpphs). When building, Cabal will automatically run the appropriate preprocessor and compile the Haskell module it produces.

Some fields take lists of values, which are optionally separated by commas, except for the build-depends field, where the commas are mandatory.

Some fields are marked as required. All others are optional, and unless otherwise specified have empty default values.

Package properties

These fields may occur in the first top-level properties section and describe the package as a whole:

name: package-name (required)

The unique name of the package (see the section called “Packages”), without the version number.

version: numbers (required)

The package version number, usually consisting of a sequence of natural numbers separated by dots.

cabal-version: >, <=, etc. & numbers

The version of Cabal required for this package. Since, with Cabal version 1.2 the syntax of package descriptions has changed, this is now a required field. List the field early in your .cabal file so that it will appear as a syntax error before any others, since old versions of Cabal unfortunately do not recognize this field.

For compatibility, files written in the old syntax are still recognized. Thus if you don't require features introduced with or after Cabal version 1.2, you may write your package description file using the old syntax. Please consult the user's guide of that Cabal version for a description of that syntax.

build-type: identifier

The type of build used by this package. Build types are the constructors of the BuildType type, defaulting to Custom. If this field is given a value other than Custom, some tools such as cabal-install will be able to build the package without using the setup script. So if you are just using the default Setup.hs then set the build type as Simple.

license: identifier (default: AllRightsReserved)

The type of license under which this package is distributed. License names are the constants of the License type.

license-file: filename

The name of a file containing the precise license for this package. It will be installed with the package.

copyright: freeform

The content of a copyright notice, typically the name of the holder of the copyright on the package and the year(s) from which copyright is claimed.

For example: Copyright: (c) 2006-2007 Joe Bloggs

author: freeform

The original author of the package.

maintainer: address

The current maintainer or maintainers of the package. This is an e-mail address to which users should send bug reports, feature requests and patches.

stability: freeform

The stability level of the package, e.g. alpha, experimental, provisional, stable.

homepage: URL

The package homepage.

bug-reports: URL

The URL where users should direct bug reports. This would normally be either:

  • A mailto: URL, eg for a person or a mailing list.

  • An http: (or https:) URL for an online bug tracking system.

For example Cabal itself uses a web-based bug tracking system

bug-reports: http://hackage.haskell.org/trac/hackage/

package-url: URL

The location of a source bundle for the package. The distribution should be a Cabal package.

synopsis: freeform

A very short description of the package, for use in a table of packages. This is your headline, so keep it short (one line) but as informative as possible. Save space by not including the package name or saying it's written in Haskell.

description: freeform

Description of the package. This may be several paragraphs, and should be aimed at a Haskell programmer who has never heard of your package before.

For library packages, this field is used as prologue text by setup haddock (see the section called “setup haddock”), and thus may contain the same markup as haddock documentation comments.

category: freeform

A classification category for future use by the package catalogue Hackage. These categories have not yet been specified, but the upper levels of the module hierarchy make a good start.

tested-with: compiler list

A list of compilers and versions against which the package has been tested (or at least built).

data-files: filename list

A list of files to be installed for run-time use by the package. This is useful for packages that use a large amount of static data, such as tables of values or code templates. For details on how to find these files at run-time, see the section called “Accessing data files from package code”.

A limited form of * wildcards in file names, for example data-files: images/*.png matches all the .png files in the images directory.

The limitation is that * wildcards are only allowed in place of the file name, not in the directory name or file extension. In particular, wildcards do not include directories contents recursively. Furthermore, if a wildcard is used it must be used with an extension, so data-files: data/* is not allowed. When matching a wildcard plus extension, a file's full extension must match exactly, so *.gz matches foo.gz but not foo.tar.gz. A wildcard that does not match any files is an error.

The reason for providing only a very limited form of wildcard is to concisely express the common case of a large number of related files of the same file type without making it too easy to accidentally include unwanted files.

data-dir: directory

The directory where Cabal looks for data files to install, relative to the source directory. By default, Cabal will look in the source directory itself.

extra-source-files: filename list

A list of additional files to be included in source distributions built with setup sdist (see the section called “setup sdist”).

As with data-files it can use a limited form of * wildcards in file names.

extra-tmp-files: filename list

A list of additional files or directories to be removed by setup clean (see the section called “setup clean”). These would typically be additional files created by additional hooks, such as the scheme described in the section called “System-dependent parameters”.

Library

The library section should contain the following fields:

exposed-modules: identifier list (required if this package contains a library)

A list of modules added by this package.

exposed: boolean (default: True)

Some Haskell compilers (notably GHC) support the notion of packages being “exposed” or “hidden” which means the modules they provide can be easily imported without always having to specify which package they come from. However this only works effectively if the modules provided by all exposed packages do not overlap (otherwise a module import would be ambiguous).

Almost all new libraries use hierarchical module names that do not clash, so it is very uncommon to have to use this field. However it may be necessary to set exposed: False for some old libraries that use a flat module namespace or where it is known that the exposed modules would clash with other common modules.

The library section may also contain build information fields (see the section called “Build information”).

Executables

Executable sections (if present) describe executable programs contained in the package and must have an argument after the section label, which defines the name of the executable. This is a freeform argument but may not contain spaces.

The executable may be described using the following fields, as well as build information fields (see the section called “Build information”).

main-is: filename (required)

The name of the .hs or .lhs file containing the Main module. Note that it is the .hs filename that must be listed, even if that file is generated using a preprocessor. The source file must be relative to one of the directories listed in hs-source-dirs.

Build information

The following fields may be optionally present in a library or executable section, and give information for the building of the corresponding library or executable. See also the section called “System-dependent parameters” and the section called “Configurations” for a way to supply system-dependent values for these fields.

build-depends: package list

A list of packages needed to build this one. Each package can be annotated with a version constraint.

Version constraints use the operators ==, >=, >, <, <= and a version number. Multiple constraints can be combined using && or ||. If no version constraint is specified, any version is assumed to be acceptable. For example:

library
  build-depends:
    base >= 2,
    foo >= 1.2 && < 1.3,
    bar

Dependencies like foo >= 1.2 && < 1.3 turn out to be very common because it is recommended practise for package versions to correspond to API versions. There is a special syntax to support this use:

build-depends: foo ==1.2.*

It is only syntactic sugar. It is exactly equivalent to foo >= 1.2 && < 1.3.

other-modules: identifier list

A list of modules used by the component but not exposed to users. For a library component, these would be hidden modules of the library. For an executable, these would be auxiliary modules to be linked with the file named in the main-is field.

Note

Every module in the package must be listed in one of other-modules, exposed-modules or main-is fields.

hs-source-dirs: directory list (default: “.”)

Root directories for the module hierarchy.

For backwards compatibility, the old variant hs-source-dir is also recognized.

extensions: identifier list

A list of Haskell extensions used by every module. Extension names are the constructors of the Extension type. These determine corresponding compiler options. In particular, CPP specifies that Haskell source files are to be preprocessed with a C preprocessor.

Extensions used only by one module may be specified by placing a LANGUAGE pragma in the source file affected, e.g.:

{-# LANGUAGE CPP, MultiParamTypeClasses #-}

Note

GHC versions prior to 6.6 do not support the LANGUAGE pragma.

build-tools: program list

A list of programs, possibly annotated with versions, needed to build this package, e.g. c2hs > 0.15, cpphs. If no version constraint is specified, any version is assumed to be acceptable.

buildable: boolean (default: True)

Is the component buildable? Like some of the other fields below, this field is more useful with the slightly more elaborate form of the simple build infrastructure described in the section called “System-dependent parameters”.

ghc-options: token list

Additional options for GHC. You can often achieve the same effect using the extensions field, which is preferred.

Options required only by one module may be specified by placing an OPTIONS_GHC pragma in the source file affected.

ghc-prof-options: token list

Additional options for GHC when the package is built with profiling enabled.

ghc-shared-options: token list

Additional options for GHC when the package is built as shared library.

hugs-options: token list

Additional options for Hugs. You can often achieve the same effect using the extensions field, which is preferred.

Options required only by one module may be specified by placing an OPTIONS_HUGS pragma in the source file affected.

nhc98-options: token list

Additional options for nhc98. You can often achieve the same effect using the extensions field, which is preferred.

Options required only by one module may be specified by placing an OPTIONS_NHC98 pragma in the source file affected.

Warning: Cabal does not currently support building libraries or executables with nhc98 anyway.

includes: filename list

A list of header files to be included in any compilations via C. This field applies to both header files that are already installed on the system and to those coming with the package to be installed. These files typically contain function prototypes for foreign imports used by the package.

install-includes: filename list

A list of header files from this package to be installed into $libdir/includes when the package is installed. Files listed in install-includes: should be found in relative to the top of the source tree or relative to one of the directories listed in include-dirs.

install-includes is typically used to name header files that contain prototypes for foreign imports used in Haskell code in this package, for which the C implementations are also provided with the package. Note that to include them when compiling the package itself, they need to be listed in the includes: field as well.

include-dirs: directory list

A list of directories to search for header files, when preprocessing with c2hs, hsc2hs, ffihugs, cpphs or the C preprocessor, and also when compiling via C.

c-sources: filename list

A list of C source files to be compiled and linked with the Haskell files.

If you use this field, you should also name the C files in CFILES pragmas in the Haskell source files that use them, e.g.:

{-# CFILES dir/file1.c dir/file2.c #-}

These are ignored by the compilers, but needed by Hugs.

extra-libraries: token list

A list of extra libraries to link with.

extra-lib-dirs: directory list

A list of directories to search for libraries.

cc-options: token list

Command-line arguments to be passed to the C compiler. Since the arguments are compiler-dependent, this field is more useful with the setup described in the section called “System-dependent parameters”.

ld-options: token list

Command-line arguments to be passed to the linker. Since the arguments are compiler-dependent, this field is more useful with the setup described in the section called “System-dependent parameters”.

pkgconfig-depends: package list

A list of pkg-config packages, needed to build this package. They can be annotated with versions, e.g. gtk+-2.0 >= 2.10, cairo >= 1.0. If no version constraint is specified, any version is assumed to be acceptable. Cabal uses pkg-config to find if the packages are available on the system and to find the extra compilation and linker options needed to use the packages.

If you need to bind to a C library that supports pkg-config (use pkg-config --list-all to find out if it is supported) then it is much preferable to use this field rather than hard code options into the other fields.

frameworks: token list

On Darwin/MacOS X, a list of frameworks to link to. See Apple's developer documentation for more details on frameworks. This entry is ignored on all other platforms.

Configurations

Library and executable sections may include conditional blocks, which test for various system parameters and configuration flags. The flags mechanism is rather generic, but most of the time a flag represents certain feature, that can be switched on or off by the package user.

Here is an example package description file using configurations:

Example 4. A package containing a library and executable programs

Name: Test1
Version: 0.0.1
Cabal-Version: >= 1.2
License: BSD3
Author:  Jane Doe
Synopsis: Test package to test configurations
Category: Example

Flag Debug
  Description: Enable debug support
  Default:     False

Flag WebFrontend
  Description: Include API for web frontend.
  -- Cabal checks if the configuration is possible, first
  -- with this flag set to True and if not it tries with False

Library
  Build-Depends:   base
  Exposed-Modules: Testing.Test1
  Extensions:      CPP

  if flag(debug)
    GHC-Options: -DDEBUG
    if !os(windows)
      CC-Options: "-DDEBUG"
    else
      CC-Options: "-DNDEBUG"

  if flag(webfrontend)
    Build-Depends: cgi > 0.42
    Other-Modules: Testing.WebStuff

Executable test1
  Main-is: T1.hs
  Other-Modules: Testing.Test1
  Build-Depends: base

  if flag(debug)
    CC-Options: "-DDEBUG"
    GHC-Options: -DDEBUG

Layout

Flags, conditionals, library and executable sections use layout to indicate structure. This is very similar to the Haskell layout rule. Entries in a section have to all be indented to the same level which must be more than the section header. Tabs are not allowed to be used for indentation.

As an alternative to using layout you can also use explicit braces {}. In this case the indentation of entries in a section does not matter, though different fields within a block must be on different lines. Here is a bit of the above example again, using braces:

Example 5. Using explicit braces rather than indentation for layout

Name: Test1
Version: 0.0.1
Cabal-Version: >= 1.2
License: BSD3
Author:  Jane Doe
Synopsis: Test package to test configurations
Category: Example

Flag Debug {
  Description: Enable debug support
  Default:     False
}

Library {
  Build-Depends:   base
  Exposed-Modules: Testing.Test1
  Extensions:      CPP
  if flag(debug) {
    GHC-Options: -DDEBUG
    if !os(windows) {
      CC-Options: "-DDEBUG"
    } else {
      CC-Options: "-DNDEBUG"
    }
  }
}

Configuration Flags

A flag section takes the flag name as an argument and may contain the following fields.

description: freeform

The description of this flag.

default: boolean (default: True)

The default value of this flag.

Note that this value may be overridden in several ways (see the section called “Controlling Flag Assignments”). The rationale for having flags default to True is that users usually want new features as soon as they are available. Flags representing features that are not (yet) recommended for most users (such as experimental features or debugging support) should therefore explicitly override the default to False.

Conditional Blocks

Conditional blocks may appear anywhere inside a library or executable section. They have to follow rather strict formatting rules.

Conditional blocks must always be of the shape


    if condition
         property-descriptions-or-conditionals*
    

or


    if condition
         property-descriptions-or-conditionals*
    else
         property-descriptions-or-conditionals*
  

Note that the if and the condition have to be all on the same line.

Conditions

Conditions can be formed using boolean tests and the boolean operators || (disjunction / logical "or"), && (conjunction / logical "and"), or ! (negation / logical "not"). The unary ! takes highest precedence, || takes lowest. Precedence levels may be overridden through the use of parentheses. For example, os(darwin) && !arch(i386) || os(freebsd) is equivalent to (os(darwin) && !(arch(i386))) || os(freebsd).

The following tests are currently supported.

os( name )

Tests if the current operating system is name. The argument is tested against System.Info.os on the target system. There is unfortunately some disagreement between Haskell implementations about the standard values of System.Info.os. Cabal canonicalises it so that in particular os(windows) works on all implementations. If the canonicalised os names match, this test evaluates to true, otherwise false. The match is case-insensitive.

arch( name )

Tests if the current architecture is name. The argument is matched against System.Info.arch on the target system. If the arch names match, this test evaluates to true, otherwise false. The match is case-insensitive.

impl( compiler )

Tests for the configured Haskell implementation. An optional version constraint may be specified (for example impl(ghc >= 6.6.1)). If the configured implementation is of the right type and matches the version constraint, then this evaluates to true, otherwise false. The match is case-insensitive.

flag( name )

Evaluates to the current assignment of the flag of the given name. Flag names are case insensitive. Testing for flags that have not been introduced with a flag section is an error.

true

Constant value true.

false

Constant value false.

Resolution of Conditions and Flags

If a package descriptions specifies configuration flags the package user can control these in several ways (see the section called “Controlling Flag Assignments”). If the user does not fix the value of a flag, Cabal will try to find a flag assignment in the following way.

  • For each flag specified, it will assign its default value, evaluate all conditions with this flag assignment, and check if all dependencies can be satisfied. If this check succeeded, the package will be configured with those flag assignments.

  • If dependencies were missing, the last flag (as by the order in which the flags were introduced in the package description) is tried with its alternative value and so on. This continues until either an assignment is found where all dependencies can be satisfied, or all possible flag assignments have been tried.

To put it another way, Cabal does a complete backtracking search to find a satisfiable package configuration. It is only the dependencies specified in the build-depends field in conditional blocks that determine if a particular flag assignment is satisfiable (build-tools are not considered). The order of the declaration and the default value of the flags determines the search order. Flags overridden on the command line fix the assignment of that flag, so no backtracking will be tried for that flag.

If no suitable flag assignment could be found, the configuration phase will fail and a list of missing dependencies will be printed. Note that this resolution process is exponential in the worst case (i.e., in the case where dependencies cannot be satisfied). There are some optimizations applied internally, but the overall complexity remains unchanged.

Meaning of field values when using conditionals

During the configuration phase, a flag assignment is chosen, all conditionals are evaluated, and the package description is combined into a flat package descriptions. If the same field both inside a conditional and outside then they are combined using the following rules.

  • Boolean fields are combined using conjunction (logical "and").

  • List fields are combined by appending the inner items to the outer items, for example

    Extensions: CPP
    if impl(ghc) || impl(hugs)
      Extensions: MultiParamTypeClasses
    

    when compiled using Hugs or GHC will be combined to

    Extensions: CPP, MultiParamTypeClasses

    Similarly, if two conditional sections appear at the same nesting level, properties specified in the latter will come after properties specified in the former.

  • All other fields must not be specified in ambiguous ways. For example

    Main-is: Main.hs
    if flag(useothermain)
      Main-is: OtherMain.hs
    

    will lead to an error. Instead use

    if flag(useothermain)
      Main-is: OtherMain.hs
    else
      Main-is: Main.hs
    

Source Repositories

It is often useful to be able to specify a source revision control repository for a package. Cabal lets you specifying this information in a relatively structured form which enables other tools to interpret and make effective use of the information. For example the information should be sufficient for an automatic tool to checkout the sources.

Cabal supports specifying different information for various common source control systems. Obviously not all automated tools will support all source control systems.

Cabal supports specifying repositories for different use cases. By declaring which case we mean automated tools can be more useful. There are currently two kinds defined:

  • The head kind refers to the latest development branch of the package. This may be used for example to track activity of a project or as an indication to outside developers what sources to get for making new contributions.

  • The this kind refers to the branch and tag of a repository that contains the sources for this version or release of a package. For most source control systems this involves specifying a tag, id or hash of some form and perhaps a branch. The purpose is to be able to reconstruct the sources corresponding to a particular package version. This might be used to indicate what sources to get if someone needs to fix a bug in an older branch that is no longer an active head branch.

You can specify one kind or the other or both. As an example here are the repositories for the Cabal library. Note that the this kind of repo specifies a tag.

source-repository head
  type:     darcs
  location: http://darcs.haskell.org/cabal/

source-repository this
  type:     darcs
  location: http://darcs.haskell.org/cabal-branches/cabal-1.6/
  tag:      1.6.1

The exact fields are as follows:

type: token

The name of the source control system used for this repository. The currently recognised types are:

  • darcs

  • git

  • svn

  • cvs

  • mercurial (or alias hg)

  • bazaar (or alias bzr)

  • arch

  • monotone

This field is required.

location: URL

The location of the repository. The exact form of this field depends on the repository type. For example:

  • for darcs: http://code.haskell.org/foo/

  • for git: git://github.com/foo/bar.git

  • for CVS: anoncvs@cvs.foo.org:/cvs

This field is required.

module: token

CVS requires a named module, as each CVS server can host multiple named repositories.

This field is required for the CVS repo type and should not be used otherwise.

branch: token

Many source control systems support the notion of a branch, as a distinct concept from having repositories in separate locations. For example CVS, SVN and git use branches while for darcs uses different locations for different branches. If you need to specify a branch to identify a your repository then specify it in this field.

This field is optional.

tag: token

A tag identifies a particular state of a source repository. The tag can be used with a this repo kind to identify the state of a repo corresponding to a particular package version or release. The exact form of the tag depends on the repository type.

This field is required for the this repo kind.

subdir: directory

Some projects put the sources for multiple packages under a single source repository. This field lets you specify the relative path from the root of the repository to the top directory for the package, ie the directory containing the package's .cabal file.

This field is optional. It default to empty which corresponds to the root directory of the repository.

Accessing data files from package code

The placement on the target system of files listed in the data-files field varies between systems, and in some cases one can even move packages around after installation (see the section called “Prefix-independence”). To enable packages to find these files in a portable way, Cabal generates a module called Paths_pkgname (with any hyphens in pkgname replaced by underscores) during building, so that it may be imported by modules of the package. This module defines a function

getDataFileName :: FilePath -> IO FilePath

If the argument is a filename listed in the data-files field, the result is the name of the corresponding file on the system on which the program is running.

Note

If you decide to import the Paths_pkgname module then it must be listed in the other-modules field just like any other module in your package.

The Paths_pkgname module is not platform independent so it does not get included in the source tarballs generated by sdist.

System-dependent parameters

For some packages, especially those interfacing with C libraries, implementation details and the build procedure depend on the build environment. A variant of the simple build infrastructure (the build-type Configure) handles many such situations using a slightly longer Setup.hs:

import Distribution.Simple
main = defaultMainWithHooks defaultUserHooks

This program differs from defaultMain in two ways:

  1. If the package root directory contains a file called configure, the configure step will run that. This configure program may be a script produced by the autoconf system, or may be hand-written. This program typically discovers information about the system and records it for later steps, e.g. by generating system-dependent header files for inclusion in C source files and preprocessed Haskell source files. (Clearly this won't work for Windows without MSYS or Cygwin: other ideas are needed.)

  2. If the package root directory contains a file called package.buildinfo after the configuration step, subsequent steps will read it to obtain additional settings for build information fields (see the section called “Build information”), to be merged with the ones given in the .cabal file. In particular, this file may be generated by the configure script mentioned above, allowing these settings to vary depending on the build environment.

    The build information file should have the following structure:

    buildinfo
    
    executable: name
    buildinfo
    
    executable: name
    buildinfo
    
    ...

    where each buildinfo consists of settings of fields listed in the section called “Build information”. The first one (if present) relates to the library, while each of the others relate to the named executable. (The names must match the package description, but you don't have to have entries for all of them.)

Neither of these files is required. If they are absent, this setup script is equivalent to defaultMain.

Example 6. Using autoconf

(This example is for people familiar with the autoconf tools.)

In the X11 package, the file configure.ac contains:

AC_INIT([Haskell X11 package], [1.1], [libraries@haskell.org], [X11])

# Safety check: Ensure that we are in the correct source directory.
AC_CONFIG_SRCDIR([X11.cabal])

# Header file to place defines in
AC_CONFIG_HEADERS([include/HsX11Config.h])

# Check for X11 include paths and libraries
AC_PATH_XTRA
AC_TRY_CPP([#include <X11/Xlib.h>],,[no_x=yes])

# Build the package if we found X11 stuff
if test "$no_x" = yes
then BUILD_PACKAGE_BOOL=False
else BUILD_PACKAGE_BOOL=True
fi
AC_SUBST([BUILD_PACKAGE_BOOL])

AC_CONFIG_FILES([X11.buildinfo])
AC_OUTPUT

Then the setup script will run the configure script, which checks for the presence of the X11 libraries and substitutes for variables in the file X11.buildinfo.in:

buildable: @BUILD_PACKAGE_BOOL@
cc-options: @X_CFLAGS@
ld-options: @X_LIBS@

This generates a file X11.buildinfo supplying the parameters needed by later stages:

buildable: True
cc-options:  -I/usr/X11R6/include
ld-options:  -L/usr/X11R6/lib

The configure script also generates a header file include/HsX11Config.h containing C preprocessor defines recording the results of various tests. This file may be included by C source files and preprocessed Haskell source files in the package.


Note

Packages using these features will also need to list additional files such as configure, templates for .buildinfo files, files named only in .buildinfo files, header files and so on in the extra-source-files field, to ensure that they are included in source distributions. They should also list files and directories generated by configure in the extra-tmp-files field to ensure that they are removed by setup clean.

Conditional compilation

Sometimes you want to write code that works with more than one version of a dependency. You can specify a range of versions for the depenency in the build-depends, but how do you then write the code that can use different versions of the API?

Haskell lets you preprocess your code using the C preprocessor (either the real C preprocessor, or cpphs). To enable this, add extensions: CPP to your package description. When using CPP, Cabal provides some pre-defined macros to let you test the version of dependent packages; for example, suppose your package works with either version 3 or version 4 of the base package, you could select the available version in your Haskell modules like this:

#if MIN_VERSION_base(4,0,0)
... code that works with base-4 ...
#else
... code that works with base-3 ...
#endif

In general, Cabal supplies a macro MIN_VERSION_package(A,B,C) for each package depended on via build-depends. This macro is true if the actual version of the package in use is greater than or equal to A.B.C (using the conventional ordering on version numbers, which is lexicographic on the sequence, but numeric on each component, so for example 1.2.0 is greater than 1.0.3).

Cabal places the definitions of these macros into an automatically-generated header file, which is included when preprocessing Haskell source code by passing options to the C preprocessor.

More complex packages

For packages that don't fit the simple schemes described above, you have a few options:

  • You can customize the simple build infrastructure using hooks. These allow you to perform additional actions before and after each command is run, and also to specify additional preprocessors. See UserHooks in Distribution.Simple for the details, but note that this interface is experimental, and likely to change in future releases.

  • You could delegate all the work to make, though this is unlikely to be very portable. Cabal supports this with the build-type Make and a trivial setup library Distribution.Make, which simply parses the command line arguments and invokes make. Here Setup.hs looks like

    import Distribution.Make
    main = defaultMain

    The root directory of the package should contain a configure script, and, after that has run, a Makefile with a default target that builds the package, plus targets install, register, unregister, clean, dist and docs. Some options to commands are passed through as follows:

    • The --with-hc-pkg, --prefix, --bindir, --libdir, --datadir and --libexecdir options to the configure command are passed on to the configure script. In addition the value of the --with-compiler option is passed in a --with-hc option and all options specified with --configure-option= are passed on.

    • the --destdir option to the copy command becomes a setting of a destdir variable on the invocation of make copy. The supplied Makefile should provide a copy target, which will probably look like this:

      copy :
              $(MAKE) install prefix=$(destdir)/$(prefix) \
                              bindir=$(destdir)/$(bindir) \
                              libdir=$(destdir)/$(libdir) \
                              datadir=$(destdir)/$(datadir) \
                              libexecdir=$(destdir)/$(libexecdir)

  • You can write your own setup script conforming to the interface of the section called “Building and installing a package”, possibly using the Cabal library for part of the work. One option is to copy the source of Distribution.Simple, and alter it for your needs. Good luck.