{- (c) The University of Glasgow, 2006 \section[HscTypes]{Types for the per-module compiler} -} {-# LANGUAGE CPP, ScopedTypeVariables #-} {-# LANGUAGE RecordWildCards #-} -- | Types for the per-module compiler module HscTypes ( -- * compilation state HscEnv(..), hscEPS, FinderCache, FindResult(..), InstalledFindResult(..), Target(..), TargetId(..), pprTarget, pprTargetId, HscStatus(..), IServ(..), -- * ModuleGraph ModuleGraph, emptyMG, mkModuleGraph, extendMG, mapMG, mgModSummaries, mgElemModule, mgLookupModule, needsTemplateHaskellOrQQ, mgBootModules, -- * Hsc monad Hsc(..), runHsc, runInteractiveHsc, -- * Information about modules ModDetails(..), emptyModDetails, ModGuts(..), CgGuts(..), ForeignStubs(..), appendStubC, ImportedMods, ImportedBy(..), importedByUser, ImportedModsVal(..), SptEntry(..), ForeignSrcLang(..), ModSummary(..), ms_imps, ms_installed_mod, ms_mod_name, showModMsg, isBootSummary, msHsFilePath, msHiFilePath, msObjFilePath, SourceModified(..), isTemplateHaskellOrQQNonBoot, -- * Information about the module being compiled -- (re-exported from DriverPhases) HscSource(..), isHsBootOrSig, hscSourceString, -- * State relating to modules in this package HomePackageTable, HomeModInfo(..), emptyHomePackageTable, lookupHpt, eltsHpt, filterHpt, allHpt, mapHpt, delFromHpt, addToHpt, addListToHpt, lookupHptDirectly, listToHpt, hptCompleteSigs, hptInstances, hptRules, hptVectInfo, pprHPT, -- * State relating to known packages ExternalPackageState(..), EpsStats(..), addEpsInStats, PackageTypeEnv, PackageIfaceTable, emptyPackageIfaceTable, lookupIfaceByModule, emptyModIface, lookupHptByModule, PackageInstEnv, PackageFamInstEnv, PackageRuleBase, PackageCompleteMatchMap, mkSOName, mkHsSOName, soExt, -- * Metaprogramming MetaRequest(..), MetaResult, -- data constructors not exported to ensure correct response type metaRequestE, metaRequestP, metaRequestT, metaRequestD, metaRequestAW, MetaHook, -- * Annotations prepareAnnotations, -- * Interactive context InteractiveContext(..), emptyInteractiveContext, icPrintUnqual, icInScopeTTs, icExtendGblRdrEnv, extendInteractiveContext, extendInteractiveContextWithIds, substInteractiveContext, setInteractivePrintName, icInteractiveModule, InteractiveImport(..), setInteractivePackage, mkPrintUnqualified, pprModulePrefix, mkQualPackage, mkQualModule, pkgQual, -- * Interfaces ModIface(..), mkIfaceWarnCache, mkIfaceHashCache, mkIfaceFixCache, emptyIfaceWarnCache, mi_boot, mi_fix, mi_semantic_module, mi_free_holes, renameFreeHoles, -- * Fixity FixityEnv, FixItem(..), lookupFixity, emptyFixityEnv, -- * TyThings and type environments TyThing(..), tyThingAvailInfo, tyThingTyCon, tyThingDataCon, tyThingConLike, tyThingId, tyThingCoAxiom, tyThingParent_maybe, tyThingsTyCoVars, implicitTyThings, implicitTyConThings, implicitClassThings, isImplicitTyThing, TypeEnv, lookupType, lookupTypeHscEnv, mkTypeEnv, emptyTypeEnv, typeEnvFromEntities, mkTypeEnvWithImplicits, extendTypeEnv, extendTypeEnvList, extendTypeEnvWithIds, plusTypeEnv, lookupTypeEnv, typeEnvElts, typeEnvTyCons, typeEnvIds, typeEnvPatSyns, typeEnvDataCons, typeEnvCoAxioms, typeEnvClasses, -- * MonadThings MonadThings(..), -- * Information on imports and exports WhetherHasOrphans, IsBootInterface, Usage(..), Dependencies(..), noDependencies, updNameCacheIO, IfaceExport, -- * Warnings Warnings(..), WarningTxt(..), plusWarns, -- * Linker stuff Linkable(..), isObjectLinkable, linkableObjs, Unlinked(..), CompiledByteCode, isObject, nameOfObject, isInterpretable, byteCodeOfObject, -- * Program coverage HpcInfo(..), emptyHpcInfo, isHpcUsed, AnyHpcUsage, -- * Breakpoints ModBreaks (..), emptyModBreaks, -- * Vectorisation information VectInfo(..), IfaceVectInfo(..), noVectInfo, plusVectInfo, noIfaceVectInfo, isNoIfaceVectInfo, -- * Safe Haskell information IfaceTrustInfo, getSafeMode, setSafeMode, noIfaceTrustInfo, trustInfoToNum, numToTrustInfo, IsSafeImport, -- * result of the parser HsParsedModule(..), -- * Compilation errors and warnings SourceError, GhcApiError, mkSrcErr, srcErrorMessages, mkApiErr, throwOneError, handleSourceError, handleFlagWarnings, printOrThrowWarnings, -- * COMPLETE signature CompleteMatch(..), CompleteMatchMap, mkCompleteMatchMap, extendCompleteMatchMap ) where #include "HsVersions.h" import GhcPrelude import ByteCodeTypes import InteractiveEvalTypes ( Resume ) import GHCi.Message ( Pipe ) import GHCi.RemoteTypes import GHC.ForeignSrcLang import UniqFM import HsSyn import RdrName import Avail import Module import InstEnv ( InstEnv, ClsInst, identicalClsInstHead ) import FamInstEnv import CoreSyn ( CoreProgram, RuleBase, CoreRule, CoreVect ) import Name import NameEnv import NameSet import VarEnv import VarSet import Var import Id import IdInfo ( IdDetails(..), RecSelParent(..)) import Type import ApiAnnotation ( ApiAnns ) import Annotations ( Annotation, AnnEnv, mkAnnEnv, plusAnnEnv ) import Class import TyCon import CoAxiom import ConLike import DataCon import PatSyn import PrelNames ( gHC_PRIM, ioTyConName, printName, mkInteractiveModule , eqTyConName ) import TysWiredIn import Packages hiding ( Version(..) ) import CmdLineParser import DynFlags import DriverPhases ( Phase, HscSource(..), isHsBootOrSig, hscSourceString ) import BasicTypes import IfaceSyn import Maybes import Outputable import SrcLoc import Unique import UniqDFM import FastString import StringBuffer ( StringBuffer ) import Fingerprint import MonadUtils import Bag import Binary import ErrUtils import NameCache import Platform import Util import UniqDSet import GHC.Serialized ( Serialized ) import qualified GHC.LanguageExtensions as LangExt import Foreign import Control.Monad ( guard, liftM, ap ) import Data.Foldable ( foldl' ) import Data.IORef import Data.Time import Exception import System.FilePath import Control.Concurrent import System.Process ( ProcessHandle ) -- ----------------------------------------------------------------------------- -- Compilation state -- ----------------------------------------------------------------------------- -- | Status of a compilation to hard-code data HscStatus = HscNotGeneratingCode | HscUpToDate | HscUpdateBoot | HscUpdateSig | HscRecomp CgGuts ModSummary -- ----------------------------------------------------------------------------- -- The Hsc monad: Passing an environment and warning state newtype Hsc a = Hsc (HscEnv -> WarningMessages -> IO (a, WarningMessages)) instance Functor Hsc where fmap = liftM instance Applicative Hsc where pure a = Hsc $ \_ w -> return (a, w) (<*>) = ap instance Monad Hsc where Hsc m >>= k = Hsc $ \e w -> do (a, w1) <- m e w case k a of Hsc k' -> k' e w1 instance MonadIO Hsc where liftIO io = Hsc $ \_ w -> do a <- io; return (a, w) instance HasDynFlags Hsc where getDynFlags = Hsc $ \e w -> return (hsc_dflags e, w) runHsc :: HscEnv -> Hsc a -> IO a runHsc hsc_env (Hsc hsc) = do (a, w) <- hsc hsc_env emptyBag printOrThrowWarnings (hsc_dflags hsc_env) w return a runInteractiveHsc :: HscEnv -> Hsc a -> IO a -- A variant of runHsc that switches in the DynFlags from the -- InteractiveContext before running the Hsc computation. runInteractiveHsc hsc_env = runHsc (hsc_env { hsc_dflags = interactive_dflags }) where interactive_dflags = ic_dflags (hsc_IC hsc_env) -- ----------------------------------------------------------------------------- -- Source Errors -- When the compiler (HscMain) discovers errors, it throws an -- exception in the IO monad. mkSrcErr :: ErrorMessages -> SourceError mkSrcErr = SourceError srcErrorMessages :: SourceError -> ErrorMessages srcErrorMessages (SourceError msgs) = msgs mkApiErr :: DynFlags -> SDoc -> GhcApiError mkApiErr dflags msg = GhcApiError (showSDoc dflags msg) throwOneError :: MonadIO m => ErrMsg -> m ab throwOneError err = liftIO $ throwIO $ mkSrcErr $ unitBag err -- | A source error is an error that is caused by one or more errors in the -- source code. A 'SourceError' is thrown by many functions in the -- compilation pipeline. Inside GHC these errors are merely printed via -- 'log_action', but API clients may treat them differently, for example, -- insert them into a list box. If you want the default behaviour, use the -- idiom: -- -- > handleSourceError printExceptionAndWarnings $ do -- > ... api calls that may fail ... -- -- The 'SourceError's error messages can be accessed via 'srcErrorMessages'. -- This list may be empty if the compiler failed due to @-Werror@ -- ('Opt_WarnIsError'). -- -- See 'printExceptionAndWarnings' for more information on what to take care -- of when writing a custom error handler. newtype SourceError = SourceError ErrorMessages instance Show SourceError where show (SourceError msgs) = unlines . map show . bagToList $ msgs instance Exception SourceError -- | Perform the given action and call the exception handler if the action -- throws a 'SourceError'. See 'SourceError' for more information. handleSourceError :: (ExceptionMonad m) => (SourceError -> m a) -- ^ exception handler -> m a -- ^ action to perform -> m a handleSourceError handler act = gcatch act (\(e :: SourceError) -> handler e) -- | An error thrown if the GHC API is used in an incorrect fashion. newtype GhcApiError = GhcApiError String instance Show GhcApiError where show (GhcApiError msg) = msg instance Exception GhcApiError -- | Given a bag of warnings, turn them into an exception if -- -Werror is enabled, or print them out otherwise. printOrThrowWarnings :: DynFlags -> Bag WarnMsg -> IO () printOrThrowWarnings dflags warns = do let (make_error, warns') = mapAccumBagL (\make_err warn -> case isWarnMsgFatal dflags warn of Nothing -> (make_err, warn) Just err_reason -> (True, warn{ errMsgSeverity = SevError , errMsgReason = ErrReason err_reason })) False warns if make_error then throwIO (mkSrcErr warns') else printBagOfErrors dflags warns handleFlagWarnings :: DynFlags -> [Warn] -> IO () handleFlagWarnings dflags warns = do let warns' = filter (shouldPrintWarning dflags . warnReason) warns -- It would be nicer if warns :: [Located MsgDoc], but that -- has circular import problems. bag = listToBag [ mkPlainWarnMsg dflags loc (text warn) | Warn _ (L loc warn) <- warns' ] printOrThrowWarnings dflags bag -- Given a warn reason, check to see if it's associated -W opt is enabled shouldPrintWarning :: DynFlags -> CmdLineParser.WarnReason -> Bool shouldPrintWarning dflags ReasonDeprecatedFlag = wopt Opt_WarnDeprecatedFlags dflags shouldPrintWarning dflags ReasonUnrecognisedFlag = wopt Opt_WarnUnrecognisedWarningFlags dflags shouldPrintWarning _ _ = True {- ************************************************************************ * * \subsection{HscEnv} * * ************************************************************************ -} -- | HscEnv is like 'Session', except that some of the fields are immutable. -- An HscEnv is used to compile a single module from plain Haskell source -- code (after preprocessing) to either C, assembly or C--. Things like -- the module graph don't change during a single compilation. -- -- Historical note: \"hsc\" used to be the name of the compiler binary, -- when there was a separate driver and compiler. To compile a single -- module, the driver would invoke hsc on the source code... so nowadays -- we think of hsc as the layer of the compiler that deals with compiling -- a single module. data HscEnv = HscEnv { hsc_dflags :: DynFlags, -- ^ The dynamic flag settings hsc_targets :: [Target], -- ^ The targets (or roots) of the current session hsc_mod_graph :: ModuleGraph, -- ^ The module graph of the current session hsc_IC :: InteractiveContext, -- ^ The context for evaluating interactive statements hsc_HPT :: HomePackageTable, -- ^ The home package table describes already-compiled -- home-package modules, /excluding/ the module we -- are compiling right now. -- (In one-shot mode the current module is the only -- home-package module, so hsc_HPT is empty. All other -- modules count as \"external-package\" modules. -- However, even in GHCi mode, hi-boot interfaces are -- demand-loaded into the external-package table.) -- -- 'hsc_HPT' is not mutable because we only demand-load -- external packages; the home package is eagerly -- loaded, module by module, by the compilation manager. -- -- The HPT may contain modules compiled earlier by @--make@ -- but not actually below the current module in the dependency -- graph. -- -- (This changes a previous invariant: changed Jan 05.) hsc_EPS :: {-# UNPACK #-} !(IORef ExternalPackageState), -- ^ Information about the currently loaded external packages. -- This is mutable because packages will be demand-loaded during -- a compilation run as required. hsc_NC :: {-# UNPACK #-} !(IORef NameCache), -- ^ As with 'hsc_EPS', this is side-effected by compiling to -- reflect sucking in interface files. They cache the state of -- external interface files, in effect. hsc_FC :: {-# UNPACK #-} !(IORef FinderCache), -- ^ The cached result of performing finding in the file system hsc_type_env_var :: Maybe (Module, IORef TypeEnv) -- ^ Used for one-shot compilation only, to initialise -- the 'IfGblEnv'. See 'TcRnTypes.tcg_type_env_var' for -- 'TcRnTypes.TcGblEnv'. See also Note [hsc_type_env_var hack] , hsc_iserv :: MVar (Maybe IServ) -- ^ interactive server process. Created the first -- time it is needed. } -- Note [hsc_type_env_var hack] -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- hsc_type_env_var is used to initialize tcg_type_env_var, and -- eventually it is the mutable variable that is queried from -- if_rec_types to get a TypeEnv. So, clearly, it's something -- related to knot-tying (see Note [Tying the knot]). -- hsc_type_env_var is used in two places: initTcRn (where -- it initializes tcg_type_env_var) and initIfaceCheck -- (where it initializes if_rec_types). -- -- But why do we need a way to feed a mutable variable in? Why -- can't we just initialize tcg_type_env_var when we start -- typechecking? The problem is we need to knot-tie the -- EPS, and we may start adding things to the EPS before type -- checking starts. -- -- Here is a concrete example. Suppose we are running -- "ghc -c A.hs", and we have this file system state: -- -- A.hs-boot A.hi-boot **up to date** -- B.hs B.hi **up to date** -- A.hs A.hi **stale** -- -- The first thing we do is run checkOldIface on A.hi. -- checkOldIface will call loadInterface on B.hi so it can -- get its hands on the fingerprints, to find out if A.hi -- needs recompilation. But loadInterface also populates -- the EPS! And so if compilation turns out to be necessary, -- as it is in this case, the thunks we put into the EPS for -- B.hi need to have the correct if_rec_types mutable variable -- to query. -- -- If the mutable variable is only allocated WHEN we start -- typechecking, then that's too late: we can't get the -- information to the thunks. So we need to pre-commit -- to a type variable in 'hscIncrementalCompile' BEFORE we -- check the old interface. -- -- This is all a massive hack because arguably checkOldIface -- should not populate the EPS. But that's a refactor for -- another day. data IServ = IServ { iservPipe :: Pipe , iservProcess :: ProcessHandle , iservLookupSymbolCache :: IORef (UniqFM (Ptr ())) , iservPendingFrees :: [HValueRef] } -- | Retrieve the ExternalPackageState cache. hscEPS :: HscEnv -> IO ExternalPackageState hscEPS hsc_env = readIORef (hsc_EPS hsc_env) -- | A compilation target. -- -- A target may be supplied with the actual text of the -- module. If so, use this instead of the file contents (this -- is for use in an IDE where the file hasn't been saved by -- the user yet). data Target = Target { targetId :: TargetId, -- ^ module or filename targetAllowObjCode :: Bool, -- ^ object code allowed? targetContents :: Maybe (StringBuffer,UTCTime) -- ^ in-memory text buffer? } data TargetId = TargetModule ModuleName -- ^ A module name: search for the file | TargetFile FilePath (Maybe Phase) -- ^ A filename: preprocess & parse it to find the module name. -- If specified, the Phase indicates how to compile this file -- (which phase to start from). Nothing indicates the starting phase -- should be determined from the suffix of the filename. deriving Eq pprTarget :: Target -> SDoc pprTarget (Target id obj _) = (if obj then char '*' else empty) <> pprTargetId id instance Outputable Target where ppr = pprTarget pprTargetId :: TargetId -> SDoc pprTargetId (TargetModule m) = ppr m pprTargetId (TargetFile f _) = text f instance Outputable TargetId where ppr = pprTargetId {- ************************************************************************ * * \subsection{Package and Module Tables} * * ************************************************************************ -} -- | Helps us find information about modules in the home package type HomePackageTable = DModuleNameEnv HomeModInfo -- Domain = modules in the home package that have been fully compiled -- "home" unit id cached here for convenience -- | Helps us find information about modules in the imported packages type PackageIfaceTable = ModuleEnv ModIface -- Domain = modules in the imported packages -- | Constructs an empty HomePackageTable emptyHomePackageTable :: HomePackageTable emptyHomePackageTable = emptyUDFM -- | Constructs an empty PackageIfaceTable emptyPackageIfaceTable :: PackageIfaceTable emptyPackageIfaceTable = emptyModuleEnv pprHPT :: HomePackageTable -> SDoc -- A bit arbitrary for now pprHPT hpt = pprUDFM hpt $ \hms -> vcat [ hang (ppr (mi_module (hm_iface hm))) 2 (ppr (md_types (hm_details hm))) | hm <- hms ] lookupHpt :: HomePackageTable -> ModuleName -> Maybe HomeModInfo lookupHpt = lookupUDFM lookupHptDirectly :: HomePackageTable -> Unique -> Maybe HomeModInfo lookupHptDirectly = lookupUDFM_Directly eltsHpt :: HomePackageTable -> [HomeModInfo] eltsHpt = eltsUDFM filterHpt :: (HomeModInfo -> Bool) -> HomePackageTable -> HomePackageTable filterHpt = filterUDFM allHpt :: (HomeModInfo -> Bool) -> HomePackageTable -> Bool allHpt = allUDFM mapHpt :: (HomeModInfo -> HomeModInfo) -> HomePackageTable -> HomePackageTable mapHpt = mapUDFM delFromHpt :: HomePackageTable -> ModuleName -> HomePackageTable delFromHpt = delFromUDFM addToHpt :: HomePackageTable -> ModuleName -> HomeModInfo -> HomePackageTable addToHpt = addToUDFM addListToHpt :: HomePackageTable -> [(ModuleName, HomeModInfo)] -> HomePackageTable addListToHpt = addListToUDFM listToHpt :: [(ModuleName, HomeModInfo)] -> HomePackageTable listToHpt = listToUDFM lookupHptByModule :: HomePackageTable -> Module -> Maybe HomeModInfo -- The HPT is indexed by ModuleName, not Module, -- we must check for a hit on the right Module lookupHptByModule hpt mod = case lookupHpt hpt (moduleName mod) of Just hm | mi_module (hm_iface hm) == mod -> Just hm _otherwise -> Nothing -- | Information about modules in the package being compiled data HomeModInfo = HomeModInfo { hm_iface :: !ModIface, -- ^ The basic loaded interface file: every loaded module has one of -- these, even if it is imported from another package hm_details :: !ModDetails, -- ^ Extra information that has been created from the 'ModIface' for -- the module, typically during typechecking hm_linkable :: !(Maybe Linkable) -- ^ The actual artifact we would like to link to access things in -- this module. -- -- 'hm_linkable' might be Nothing: -- -- 1. If this is an .hs-boot module -- -- 2. Temporarily during compilation if we pruned away -- the old linkable because it was out of date. -- -- After a complete compilation ('GHC.load'), all 'hm_linkable' fields -- in the 'HomePackageTable' will be @Just@. -- -- When re-linking a module ('HscMain.HscNoRecomp'), we construct the -- 'HomeModInfo' by building a new 'ModDetails' from the old -- 'ModIface' (only). } -- | Find the 'ModIface' for a 'Module', searching in both the loaded home -- and external package module information lookupIfaceByModule :: DynFlags -> HomePackageTable -> PackageIfaceTable -> Module -> Maybe ModIface lookupIfaceByModule _dflags hpt pit mod = case lookupHptByModule hpt mod of Just hm -> Just (hm_iface hm) Nothing -> lookupModuleEnv pit mod -- If the module does come from the home package, why do we look in the PIT as well? -- (a) In OneShot mode, even home-package modules accumulate in the PIT -- (b) Even in Batch (--make) mode, there is *one* case where a home-package -- module is in the PIT, namely GHC.Prim when compiling the base package. -- We could eliminate (b) if we wanted, by making GHC.Prim belong to a package -- of its own, but it doesn't seem worth the bother. hptCompleteSigs :: HscEnv -> [CompleteMatch] hptCompleteSigs = hptAllThings (md_complete_sigs . hm_details) -- | Find all the instance declarations (of classes and families) from -- the Home Package Table filtered by the provided predicate function. -- Used in @tcRnImports@, to select the instances that are in the -- transitive closure of imports from the currently compiled module. hptInstances :: HscEnv -> (ModuleName -> Bool) -> ([ClsInst], [FamInst]) hptInstances hsc_env want_this_module = let (insts, famInsts) = unzip $ flip hptAllThings hsc_env $ \mod_info -> do guard (want_this_module (moduleName (mi_module (hm_iface mod_info)))) let details = hm_details mod_info return (md_insts details, md_fam_insts details) in (concat insts, concat famInsts) -- | Get the combined VectInfo of all modules in the home package table. In -- contrast to instances and rules, we don't care whether the modules are -- "below" us in the dependency sense. The VectInfo of those modules not "below" -- us does not affect the compilation of the current module. hptVectInfo :: HscEnv -> VectInfo hptVectInfo = concatVectInfo . hptAllThings ((: []) . md_vect_info . hm_details) -- | Get rules from modules "below" this one (in the dependency sense) hptRules :: HscEnv -> [(ModuleName, IsBootInterface)] -> [CoreRule] hptRules = hptSomeThingsBelowUs (md_rules . hm_details) False -- | Get annotations from modules "below" this one (in the dependency sense) hptAnns :: HscEnv -> Maybe [(ModuleName, IsBootInterface)] -> [Annotation] hptAnns hsc_env (Just deps) = hptSomeThingsBelowUs (md_anns . hm_details) False hsc_env deps hptAnns hsc_env Nothing = hptAllThings (md_anns . hm_details) hsc_env hptAllThings :: (HomeModInfo -> [a]) -> HscEnv -> [a] hptAllThings extract hsc_env = concatMap extract (eltsHpt (hsc_HPT hsc_env)) -- | Get things from modules "below" this one (in the dependency sense) -- C.f Inst.hptInstances hptSomeThingsBelowUs :: (HomeModInfo -> [a]) -> Bool -> HscEnv -> [(ModuleName, IsBootInterface)] -> [a] hptSomeThingsBelowUs extract include_hi_boot hsc_env deps | isOneShot (ghcMode (hsc_dflags hsc_env)) = [] | otherwise = let hpt = hsc_HPT hsc_env in [ thing | -- Find each non-hi-boot module below me (mod, is_boot_mod) <- deps , include_hi_boot || not is_boot_mod -- unsavoury: when compiling the base package with --make, we -- sometimes try to look up RULES etc for GHC.Prim. GHC.Prim won't -- be in the HPT, because we never compile it; it's in the EPT -- instead. ToDo: clean up, and remove this slightly bogus filter: , mod /= moduleName gHC_PRIM -- Look it up in the HPT , let things = case lookupHpt hpt mod of Just info -> extract info Nothing -> pprTrace "WARNING in hptSomeThingsBelowUs" msg [] msg = vcat [text "missing module" <+> ppr mod, text "Probable cause: out-of-date interface files"] -- This really shouldn't happen, but see Trac #962 -- And get its dfuns , thing <- things ] {- ************************************************************************ * * \subsection{Metaprogramming} * * ************************************************************************ -} -- | The supported metaprogramming result types data MetaRequest = MetaE (LHsExpr GhcPs -> MetaResult) | MetaP (LPat GhcPs -> MetaResult) | MetaT (LHsType GhcPs -> MetaResult) | MetaD ([LHsDecl GhcPs] -> MetaResult) | MetaAW (Serialized -> MetaResult) -- | data constructors not exported to ensure correct result type data MetaResult = MetaResE { unMetaResE :: LHsExpr GhcPs } | MetaResP { unMetaResP :: LPat GhcPs } | MetaResT { unMetaResT :: LHsType GhcPs } | MetaResD { unMetaResD :: [LHsDecl GhcPs] } | MetaResAW { unMetaResAW :: Serialized } type MetaHook f = MetaRequest -> LHsExpr GhcTc -> f MetaResult metaRequestE :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LHsExpr GhcPs) metaRequestE h = fmap unMetaResE . h (MetaE MetaResE) metaRequestP :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LPat GhcPs) metaRequestP h = fmap unMetaResP . h (MetaP MetaResP) metaRequestT :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LHsType GhcPs) metaRequestT h = fmap unMetaResT . h (MetaT MetaResT) metaRequestD :: Functor f => MetaHook f -> LHsExpr GhcTc -> f [LHsDecl GhcPs] metaRequestD h = fmap unMetaResD . h (MetaD MetaResD) metaRequestAW :: Functor f => MetaHook f -> LHsExpr GhcTc -> f Serialized metaRequestAW h = fmap unMetaResAW . h (MetaAW MetaResAW) {- ************************************************************************ * * \subsection{Dealing with Annotations} * * ************************************************************************ -} -- | Deal with gathering annotations in from all possible places -- and combining them into a single 'AnnEnv' prepareAnnotations :: HscEnv -> Maybe ModGuts -> IO AnnEnv prepareAnnotations hsc_env mb_guts = do eps <- hscEPS hsc_env let -- Extract annotations from the module being compiled if supplied one mb_this_module_anns = fmap (mkAnnEnv . mg_anns) mb_guts -- Extract dependencies of the module if we are supplied one, -- otherwise load annotations from all home package table -- entries regardless of dependency ordering. home_pkg_anns = (mkAnnEnv . hptAnns hsc_env) $ fmap (dep_mods . mg_deps) mb_guts other_pkg_anns = eps_ann_env eps ann_env = foldl1' plusAnnEnv $ catMaybes [mb_this_module_anns, Just home_pkg_anns, Just other_pkg_anns] return ann_env {- ************************************************************************ * * \subsection{The Finder cache} * * ************************************************************************ -} -- | The 'FinderCache' maps modules to the result of -- searching for that module. It records the results of searching for -- modules along the search path. On @:load@, we flush the entire -- contents of this cache. -- type FinderCache = InstalledModuleEnv InstalledFindResult data InstalledFindResult = InstalledFound ModLocation InstalledModule | InstalledNoPackage InstalledUnitId | InstalledNotFound [FilePath] (Maybe InstalledUnitId) -- | The result of searching for an imported module. -- -- NB: FindResult manages both user source-import lookups -- (which can result in 'Module') as well as direct imports -- for interfaces (which always result in 'InstalledModule'). data FindResult = Found ModLocation Module -- ^ The module was found | NoPackage UnitId -- ^ The requested package was not found | FoundMultiple [(Module, ModuleOrigin)] -- ^ _Error_: both in multiple packages -- | Not found | NotFound { fr_paths :: [FilePath] -- Places where I looked , fr_pkg :: Maybe UnitId -- Just p => module is in this package's -- manifest, but couldn't find -- the .hi file , fr_mods_hidden :: [UnitId] -- Module is in these packages, -- but the *module* is hidden , fr_pkgs_hidden :: [UnitId] -- Module is in these packages, -- but the *package* is hidden , fr_suggestions :: [ModuleSuggestion] -- Possible mis-spelled modules } {- ************************************************************************ * * \subsection{Symbol tables and Module details} * * ************************************************************************ -} -- | A 'ModIface' plus a 'ModDetails' summarises everything we know -- about a compiled module. The 'ModIface' is the stuff *before* linking, -- and can be written out to an interface file. The 'ModDetails is after -- linking and can be completely recovered from just the 'ModIface'. -- -- When we read an interface file, we also construct a 'ModIface' from it, -- except that we explicitly make the 'mi_decls' and a few other fields empty; -- as when reading we consolidate the declarations etc. into a number of indexed -- maps and environments in the 'ExternalPackageState'. data ModIface = ModIface { mi_module :: !Module, -- ^ Name of the module we are for mi_sig_of :: !(Maybe Module), -- ^ Are we a sig of another mod? mi_iface_hash :: !Fingerprint, -- ^ Hash of the whole interface mi_mod_hash :: !Fingerprint, -- ^ Hash of the ABI only mi_flag_hash :: !Fingerprint, -- ^ Hash of the important flags -- used when compiling the module, -- excluding optimisation flags mi_opt_hash :: !Fingerprint, -- ^ Hash of optimisation flags mi_hpc_hash :: !Fingerprint, -- ^ Hash of hpc flags mi_orphan :: !WhetherHasOrphans, -- ^ Whether this module has orphans mi_finsts :: !WhetherHasFamInst, -- ^ Whether this module has family instances. -- See Note [The type family instance consistency story]. mi_hsc_src :: !HscSource, -- ^ Boot? Signature? mi_deps :: Dependencies, -- ^ The dependencies of the module. This is -- consulted for directly-imported modules, but not -- for anything else (hence lazy) mi_usages :: [Usage], -- ^ Usages; kept sorted so that it's easy to decide -- whether to write a new iface file (changing usages -- doesn't affect the hash of this module) -- NOT STRICT! we read this field lazily from the interface file -- It is *only* consulted by the recompilation checker mi_exports :: ![IfaceExport], -- ^ Exports -- Kept sorted by (mod,occ), to make version comparisons easier -- Records the modules that are the declaration points for things -- exported by this module, and the 'OccName's of those things mi_exp_hash :: !Fingerprint, -- ^ Hash of export list mi_used_th :: !Bool, -- ^ Module required TH splices when it was compiled. -- This disables recompilation avoidance (see #481). mi_fixities :: [(OccName,Fixity)], -- ^ Fixities -- NOT STRICT! we read this field lazily from the interface file mi_warns :: Warnings, -- ^ Warnings -- NOT STRICT! we read this field lazily from the interface file mi_anns :: [IfaceAnnotation], -- ^ Annotations -- NOT STRICT! we read this field lazily from the interface file mi_decls :: [(Fingerprint,IfaceDecl)], -- ^ Type, class and variable declarations -- The hash of an Id changes if its fixity or deprecations change -- (as well as its type of course) -- Ditto data constructors, class operations, except that -- the hash of the parent class/tycon changes mi_globals :: !(Maybe GlobalRdrEnv), -- ^ Binds all the things defined at the top level in -- the /original source/ code for this module. which -- is NOT the same as mi_exports, nor mi_decls (which -- may contains declarations for things not actually -- defined by the user). Used for GHCi and for inspecting -- the contents of modules via the GHC API only. -- -- (We need the source file to figure out the -- top-level environment, if we didn't compile this module -- from source then this field contains @Nothing@). -- -- Strictly speaking this field should live in the -- 'HomeModInfo', but that leads to more plumbing. -- Instance declarations and rules mi_insts :: [IfaceClsInst], -- ^ Sorted class instance mi_fam_insts :: [IfaceFamInst], -- ^ Sorted family instances mi_rules :: [IfaceRule], -- ^ Sorted rules mi_orphan_hash :: !Fingerprint, -- ^ Hash for orphan rules, class and family -- instances, and vectorise pragmas combined mi_vect_info :: !IfaceVectInfo, -- ^ Vectorisation information -- Cached environments for easy lookup -- These are computed (lazily) from other fields -- and are not put into the interface file mi_warn_fn :: OccName -> Maybe WarningTxt, -- ^ Cached lookup for 'mi_warns' mi_fix_fn :: OccName -> Maybe Fixity, -- ^ Cached lookup for 'mi_fixities' mi_hash_fn :: OccName -> Maybe (OccName, Fingerprint), -- ^ Cached lookup for 'mi_decls'. -- The @Nothing@ in 'mi_hash_fn' means that the thing -- isn't in decls. It's useful to know that when -- seeing if we are up to date wrt. the old interface. -- The 'OccName' is the parent of the name, if it has one. mi_hpc :: !AnyHpcUsage, -- ^ True if this program uses Hpc at any point in the program. mi_trust :: !IfaceTrustInfo, -- ^ Safe Haskell Trust information for this module. mi_trust_pkg :: !Bool, -- ^ Do we require the package this module resides in be trusted -- to trust this module? This is used for the situation where a -- module is Safe (so doesn't require the package be trusted -- itself) but imports some trustworthy modules from its own -- package (which does require its own package be trusted). -- See Note [RnNames . Trust Own Package] mi_complete_sigs :: [IfaceCompleteMatch] } -- | Old-style accessor for whether or not the ModIface came from an hs-boot -- file. mi_boot :: ModIface -> Bool mi_boot iface = mi_hsc_src iface == HsBootFile -- | Lookups up a (possibly cached) fixity from a 'ModIface'. If one cannot be -- found, 'defaultFixity' is returned instead. mi_fix :: ModIface -> OccName -> Fixity mi_fix iface name = mi_fix_fn iface name `orElse` defaultFixity -- | The semantic module for this interface; e.g., if it's a interface -- for a signature, if 'mi_module' is @p[A=<A>]:A@, 'mi_semantic_module' -- will be @<A>@. mi_semantic_module :: ModIface -> Module mi_semantic_module iface = case mi_sig_of iface of Nothing -> mi_module iface Just mod -> mod -- | The "precise" free holes, e.g., the signatures that this -- 'ModIface' depends on. mi_free_holes :: ModIface -> UniqDSet ModuleName mi_free_holes iface = case splitModuleInsts (mi_module iface) of (_, Just indef) -- A mini-hack: we rely on the fact that 'renameFreeHoles' -- drops things that aren't holes. -> renameFreeHoles (mkUniqDSet cands) (indefUnitIdInsts (indefModuleUnitId indef)) _ -> emptyUniqDSet where cands = map fst (dep_mods (mi_deps iface)) -- | Given a set of free holes, and a unit identifier, rename -- the free holes according to the instantiation of the unit -- identifier. For example, if we have A and B free, and -- our unit identity is @p[A=<C>,B=impl:B]@, the renamed free -- holes are just C. renameFreeHoles :: UniqDSet ModuleName -> [(ModuleName, Module)] -> UniqDSet ModuleName renameFreeHoles fhs insts = unionManyUniqDSets (map lookup_impl (uniqDSetToList fhs)) where hmap = listToUFM insts lookup_impl mod_name | Just mod <- lookupUFM hmap mod_name = moduleFreeHoles mod -- It wasn't actually a hole | otherwise = emptyUniqDSet instance Binary ModIface where put_ bh (ModIface { mi_module = mod, mi_sig_of = sig_of, mi_hsc_src = hsc_src, mi_iface_hash= iface_hash, mi_mod_hash = mod_hash, mi_flag_hash = flag_hash, mi_opt_hash = opt_hash, mi_hpc_hash = hpc_hash, mi_orphan = orphan, mi_finsts = hasFamInsts, mi_deps = deps, mi_usages = usages, mi_exports = exports, mi_exp_hash = exp_hash, mi_used_th = used_th, mi_fixities = fixities, mi_warns = warns, mi_anns = anns, mi_decls = decls, mi_insts = insts, mi_fam_insts = fam_insts, mi_rules = rules, mi_orphan_hash = orphan_hash, mi_vect_info = vect_info, mi_hpc = hpc_info, mi_trust = trust, mi_trust_pkg = trust_pkg, mi_complete_sigs = complete_sigs }) = do put_ bh mod put_ bh sig_of put_ bh hsc_src put_ bh iface_hash put_ bh mod_hash put_ bh flag_hash put_ bh opt_hash put_ bh hpc_hash put_ bh orphan put_ bh hasFamInsts lazyPut bh deps lazyPut bh usages put_ bh exports put_ bh exp_hash put_ bh used_th put_ bh fixities lazyPut bh warns lazyPut bh anns put_ bh decls put_ bh insts put_ bh fam_insts lazyPut bh rules put_ bh orphan_hash put_ bh vect_info put_ bh hpc_info put_ bh trust put_ bh trust_pkg put_ bh complete_sigs get bh = do mod <- get bh sig_of <- get bh hsc_src <- get bh iface_hash <- get bh mod_hash <- get bh flag_hash <- get bh opt_hash <- get bh hpc_hash <- get bh orphan <- get bh hasFamInsts <- get bh deps <- lazyGet bh usages <- {-# SCC "bin_usages" #-} lazyGet bh exports <- {-# SCC "bin_exports" #-} get bh exp_hash <- get bh used_th <- get bh fixities <- {-# SCC "bin_fixities" #-} get bh warns <- {-# SCC "bin_warns" #-} lazyGet bh anns <- {-# SCC "bin_anns" #-} lazyGet bh decls <- {-# SCC "bin_tycldecls" #-} get bh insts <- {-# SCC "bin_insts" #-} get bh fam_insts <- {-# SCC "bin_fam_insts" #-} get bh rules <- {-# SCC "bin_rules" #-} lazyGet bh orphan_hash <- get bh vect_info <- get bh hpc_info <- get bh trust <- get bh trust_pkg <- get bh complete_sigs <- get bh return (ModIface { mi_module = mod, mi_sig_of = sig_of, mi_hsc_src = hsc_src, mi_iface_hash = iface_hash, mi_mod_hash = mod_hash, mi_flag_hash = flag_hash, mi_opt_hash = opt_hash, mi_hpc_hash = hpc_hash, mi_orphan = orphan, mi_finsts = hasFamInsts, mi_deps = deps, mi_usages = usages, mi_exports = exports, mi_exp_hash = exp_hash, mi_used_th = used_th, mi_anns = anns, mi_fixities = fixities, mi_warns = warns, mi_decls = decls, mi_globals = Nothing, mi_insts = insts, mi_fam_insts = fam_insts, mi_rules = rules, mi_orphan_hash = orphan_hash, mi_vect_info = vect_info, mi_hpc = hpc_info, mi_trust = trust, mi_trust_pkg = trust_pkg, -- And build the cached values mi_warn_fn = mkIfaceWarnCache warns, mi_fix_fn = mkIfaceFixCache fixities, mi_hash_fn = mkIfaceHashCache decls, mi_complete_sigs = complete_sigs }) -- | The original names declared of a certain module that are exported type IfaceExport = AvailInfo -- | Constructs an empty ModIface emptyModIface :: Module -> ModIface emptyModIface mod = ModIface { mi_module = mod, mi_sig_of = Nothing, mi_iface_hash = fingerprint0, mi_mod_hash = fingerprint0, mi_flag_hash = fingerprint0, mi_opt_hash = fingerprint0, mi_hpc_hash = fingerprint0, mi_orphan = False, mi_finsts = False, mi_hsc_src = HsSrcFile, mi_deps = noDependencies, mi_usages = [], mi_exports = [], mi_exp_hash = fingerprint0, mi_used_th = False, mi_fixities = [], mi_warns = NoWarnings, mi_anns = [], mi_insts = [], mi_fam_insts = [], mi_rules = [], mi_decls = [], mi_globals = Nothing, mi_orphan_hash = fingerprint0, mi_vect_info = noIfaceVectInfo, mi_warn_fn = emptyIfaceWarnCache, mi_fix_fn = emptyIfaceFixCache, mi_hash_fn = emptyIfaceHashCache, mi_hpc = False, mi_trust = noIfaceTrustInfo, mi_trust_pkg = False, mi_complete_sigs = [] } -- | Constructs cache for the 'mi_hash_fn' field of a 'ModIface' mkIfaceHashCache :: [(Fingerprint,IfaceDecl)] -> (OccName -> Maybe (OccName, Fingerprint)) mkIfaceHashCache pairs = \occ -> lookupOccEnv env occ where env = foldl' add_decl emptyOccEnv pairs add_decl env0 (v,d) = foldl' add env0 (ifaceDeclFingerprints v d) where add env0 (occ,hash) = extendOccEnv env0 occ (occ,hash) emptyIfaceHashCache :: OccName -> Maybe (OccName, Fingerprint) emptyIfaceHashCache _occ = Nothing -- | The 'ModDetails' is essentially a cache for information in the 'ModIface' -- for home modules only. Information relating to packages will be loaded into -- global environments in 'ExternalPackageState'. data ModDetails = ModDetails { -- The next two fields are created by the typechecker md_exports :: [AvailInfo], md_types :: !TypeEnv, -- ^ Local type environment for this particular module -- Includes Ids, TyCons, PatSyns md_insts :: ![ClsInst], -- ^ 'DFunId's for the instances in this module md_fam_insts :: ![FamInst], md_rules :: ![CoreRule], -- ^ Domain may include 'Id's from other modules md_anns :: ![Annotation], -- ^ Annotations present in this module: currently -- they only annotate things also declared in this module md_vect_info :: !VectInfo, -- ^ Module vectorisation information md_complete_sigs :: [CompleteMatch] -- ^ Complete match pragmas for this module } -- | Constructs an empty ModDetails emptyModDetails :: ModDetails emptyModDetails = ModDetails { md_types = emptyTypeEnv, md_exports = [], md_insts = [], md_rules = [], md_fam_insts = [], md_anns = [], md_vect_info = noVectInfo, md_complete_sigs = [] } -- | Records the modules directly imported by a module for extracting e.g. -- usage information, and also to give better error message type ImportedMods = ModuleEnv [ImportedBy] -- | If a module was "imported" by the user, we associate it with -- more detailed usage information 'ImportedModsVal'; a module -- imported by the system only gets used for usage information. data ImportedBy = ImportedByUser ImportedModsVal | ImportedBySystem importedByUser :: [ImportedBy] -> [ImportedModsVal] importedByUser (ImportedByUser imv : bys) = imv : importedByUser bys importedByUser (ImportedBySystem : bys) = importedByUser bys importedByUser [] = [] data ImportedModsVal = ImportedModsVal { imv_name :: ModuleName, -- ^ The name the module is imported with imv_span :: SrcSpan, -- ^ the source span of the whole import imv_is_safe :: IsSafeImport, -- ^ whether this is a safe import imv_is_hiding :: Bool, -- ^ whether this is an "hiding" import imv_all_exports :: GlobalRdrEnv, -- ^ all the things the module could provide imv_qualified :: Bool -- ^ whether this is a qualified import } -- | A ModGuts is carried through the compiler, accumulating stuff as it goes -- There is only one ModGuts at any time, the one for the module -- being compiled right now. Once it is compiled, a 'ModIface' and -- 'ModDetails' are extracted and the ModGuts is discarded. data ModGuts = ModGuts { mg_module :: !Module, -- ^ Module being compiled mg_hsc_src :: HscSource, -- ^ Whether it's an hs-boot module mg_loc :: SrcSpan, -- ^ For error messages from inner passes mg_exports :: ![AvailInfo], -- ^ What it exports mg_deps :: !Dependencies, -- ^ What it depends on, directly or -- otherwise mg_usages :: ![Usage], -- ^ What was used? Used for interfaces. mg_used_th :: !Bool, -- ^ Did we run a TH splice? mg_rdr_env :: !GlobalRdrEnv, -- ^ Top-level lexical environment -- These fields all describe the things **declared in this module** mg_fix_env :: !FixityEnv, -- ^ Fixities declared in this module. -- Used for creating interface files. mg_tcs :: ![TyCon], -- ^ TyCons declared in this module -- (includes TyCons for classes) mg_insts :: ![ClsInst], -- ^ Class instances declared in this module mg_fam_insts :: ![FamInst], -- ^ Family instances declared in this module mg_patsyns :: ![PatSyn], -- ^ Pattern synonyms declared in this module mg_rules :: ![CoreRule], -- ^ Before the core pipeline starts, contains -- See Note [Overall plumbing for rules] in Rules.hs mg_binds :: !CoreProgram, -- ^ Bindings for this module mg_foreign :: !ForeignStubs, -- ^ Foreign exports declared in this module mg_foreign_files :: ![(ForeignSrcLang, String)], -- ^ Files to be compiled with the C compiler mg_warns :: !Warnings, -- ^ Warnings declared in the module mg_anns :: [Annotation], -- ^ Annotations declared in this module mg_complete_sigs :: [CompleteMatch], -- ^ Complete Matches mg_hpc_info :: !HpcInfo, -- ^ Coverage tick boxes in the module mg_modBreaks :: !(Maybe ModBreaks), -- ^ Breakpoints for the module mg_vect_decls:: ![CoreVect], -- ^ Vectorisation declarations in this module -- (produced by desugarer & consumed by vectoriser) mg_vect_info :: !VectInfo, -- ^ Pool of vectorised declarations in the module -- The next two fields are unusual, because they give instance -- environments for *all* modules in the home package, including -- this module, rather than for *just* this module. -- Reason: when looking up an instance we don't want to have to -- look at each module in the home package in turn mg_inst_env :: InstEnv, -- ^ Class instance environment for -- /home-package/ modules (including this -- one); c.f. 'tcg_inst_env' mg_fam_inst_env :: FamInstEnv, -- ^ Type-family instance environment for -- /home-package/ modules (including this -- one); c.f. 'tcg_fam_inst_env' mg_safe_haskell :: SafeHaskellMode, -- ^ Safe Haskell mode mg_trust_pkg :: Bool -- ^ Do we need to trust our -- own package for Safe Haskell? -- See Note [RnNames . Trust Own Package] } -- The ModGuts takes on several slightly different forms: -- -- After simplification, the following fields change slightly: -- mg_rules Orphan rules only (local ones now attached to binds) -- mg_binds With rules attached --------------------------------------------------------- -- The Tidy pass forks the information about this module: -- * one lot goes to interface file generation (ModIface) -- and later compilations (ModDetails) -- * the other lot goes to code generation (CgGuts) -- | A restricted form of 'ModGuts' for code generation purposes data CgGuts = CgGuts { cg_module :: !Module, -- ^ Module being compiled cg_tycons :: [TyCon], -- ^ Algebraic data types (including ones that started -- life as classes); generate constructors and info -- tables. Includes newtypes, just for the benefit of -- External Core cg_binds :: CoreProgram, -- ^ The tidied main bindings, including -- previously-implicit bindings for record and class -- selectors, and data constructor wrappers. But *not* -- data constructor workers; reason: we we regard them -- as part of the code-gen of tycons cg_foreign :: !ForeignStubs, -- ^ Foreign export stubs cg_foreign_files :: ![(ForeignSrcLang, String)], cg_dep_pkgs :: ![InstalledUnitId], -- ^ Dependent packages, used to -- generate #includes for C code gen cg_hpc_info :: !HpcInfo, -- ^ Program coverage tick box information cg_modBreaks :: !(Maybe ModBreaks), -- ^ Module breakpoints cg_spt_entries :: [SptEntry] -- ^ Static pointer table entries for static forms defined in -- the module. -- See Note [Grand plan for static forms] in StaticPtrTable } ----------------------------------- -- | Foreign export stubs data ForeignStubs = NoStubs -- ^ We don't have any stubs | ForeignStubs SDoc SDoc -- ^ There are some stubs. Parameters: -- -- 1) Header file prototypes for -- "foreign exported" functions -- -- 2) C stubs to use when calling -- "foreign exported" functions appendStubC :: ForeignStubs -> SDoc -> ForeignStubs appendStubC NoStubs c_code = ForeignStubs empty c_code appendStubC (ForeignStubs h c) c_code = ForeignStubs h (c $$ c_code) -- | An entry to be inserted into a module's static pointer table. -- See Note [Grand plan for static forms] in StaticPtrTable. data SptEntry = SptEntry Id Fingerprint instance Outputable SptEntry where ppr (SptEntry id fpr) = ppr id <> colon <+> ppr fpr {- ************************************************************************ * * The interactive context * * ************************************************************************ Note [The interactive package] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Type, class, and value declarations at the command prompt are treated as if they were defined in modules interactive:Ghci1 interactive:Ghci2 ...etc... with each bunch of declarations using a new module, all sharing a common package 'interactive' (see Module.interactiveUnitId, and PrelNames.mkInteractiveModule). This scheme deals well with shadowing. For example: ghci> data T = A ghci> data T = B ghci> :i A data Ghci1.T = A -- Defined at <interactive>:2:10 Here we must display info about constructor A, but its type T has been shadowed by the second declaration. But it has a respectable qualified name (Ghci1.T), and its source location says where it was defined. So the main invariant continues to hold, that in any session an original name M.T only refers to one unique thing. (In a previous iteration both the T's above were called :Interactive.T, albeit with different uniques, which gave rise to all sorts of trouble.) The details are a bit tricky though: * The field ic_mod_index counts which Ghci module we've got up to. It is incremented when extending ic_tythings * ic_tythings contains only things from the 'interactive' package. * Module from the 'interactive' package (Ghci1, Ghci2 etc) never go in the Home Package Table (HPT). When you say :load, that's when we extend the HPT. * The 'thisPackage' field of DynFlags is *not* set to 'interactive'. It stays as 'main' (or whatever -this-unit-id says), and is the package to which :load'ed modules are added to. * So how do we arrange that declarations at the command prompt get to be in the 'interactive' package? Simply by setting the tcg_mod field of the TcGblEnv to "interactive:Ghci1". This is done by the call to initTc in initTcInteractive, which in turn get the module from it 'icInteractiveModule' field of the interactive context. The 'thisPackage' field stays as 'main' (or whatever -this-unit-id says. * The main trickiness is that the type environment (tcg_type_env) and fixity envt (tcg_fix_env), now contain entities from all the interactive-package modules (Ghci1, Ghci2, ...) together, rather than just a single module as is usually the case. So you can't use "nameIsLocalOrFrom" to decide whether to look in the TcGblEnv vs the HPT/PTE. This is a change, but not a problem provided you know. * However, the tcg_binds, tcg_sigs, tcg_insts, tcg_fam_insts, etc fields of the TcGblEnv, which collect "things defined in this module", all refer to stuff define in a single GHCi command, *not* all the commands so far. In contrast, tcg_inst_env, tcg_fam_inst_env, have instances from all GhciN modules, which makes sense -- they are all "home package" modules. Note [Interactively-bound Ids in GHCi] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The Ids bound by previous Stmts in GHCi are currently a) GlobalIds, with b) An External Name, like Ghci4.foo See Note [The interactive package] above c) A tidied type (a) They must be GlobalIds (not LocalIds) otherwise when we come to compile an expression using these ids later, the byte code generator will consider the occurrences to be free rather than global. (b) Having an External Name is important because of Note [GlobalRdrEnv shadowing] in RdrName (c) Their types are tidied. This is important, because :info may ask to look at them, and :info expects the things it looks up to have tidy types Where do interactively-bound Ids come from? - GHCi REPL Stmts e.g. ghci> let foo x = x+1 These start with an Internal Name because a Stmt is a local construct, so the renamer naturally builds an Internal name for each of its binders. Then in tcRnStmt they are externalised via TcRnDriver.externaliseAndTidyId, so they get Names like Ghic4.foo. - Ids bound by the debugger etc have Names constructed by IfaceEnv.newInteractiveBinder; at the call sites it is followed by mkVanillaGlobal or mkVanillaGlobalWithInfo. So again, they are all Global, External. - TyCons, Classes, and Ids bound by other top-level declarations in GHCi (eg foreign import, record selectors) also get External Names, with Ghci9 (or 8, or 7, etc) as the module name. Note [ic_tythings] ~~~~~~~~~~~~~~~~~~ The ic_tythings field contains * The TyThings declared by the user at the command prompt (eg Ids, TyCons, Classes) * The user-visible Ids that arise from such things, which *don't* come from 'implicitTyThings', notably: - record selectors - class ops The implicitTyThings are readily obtained from the TyThings but record selectors etc are not It does *not* contain * DFunIds (they can be gotten from ic_instances) * CoAxioms (ditto) See also Note [Interactively-bound Ids in GHCi] Note [Override identical instances in GHCi] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you declare a new instance in GHCi that is identical to a previous one, we simply override the previous one; we don't regard it as overlapping. e.g. Prelude> data T = A | B Prelude> instance Eq T where ... Prelude> instance Eq T where ... -- This one overrides It's exactly the same for type-family instances. See Trac #7102 -} -- | Interactive context, recording information about the state of the -- context in which statements are executed in a GHC session. data InteractiveContext = InteractiveContext { ic_dflags :: DynFlags, -- ^ The 'DynFlags' used to evaluate interative expressions -- and statements. ic_mod_index :: Int, -- ^ Each GHCi stmt or declaration brings some new things into -- scope. We give them names like interactive:Ghci9.T, -- where the ic_index is the '9'. The ic_mod_index is -- incremented whenever we add something to ic_tythings -- See Note [The interactive package] ic_imports :: [InteractiveImport], -- ^ The GHCi top-level scope (ic_rn_gbl_env) is extended with -- these imports -- -- This field is only stored here so that the client -- can retrieve it with GHC.getContext. GHC itself doesn't -- use it, but does reset it to empty sometimes (such -- as before a GHC.load). The context is set with GHC.setContext. ic_tythings :: [TyThing], -- ^ TyThings defined by the user, in reverse order of -- definition (ie most recent at the front) -- See Note [ic_tythings] ic_rn_gbl_env :: GlobalRdrEnv, -- ^ The cached 'GlobalRdrEnv', built by -- 'InteractiveEval.setContext' and updated regularly -- It contains everything in scope at the command line, -- including everything in ic_tythings ic_instances :: ([ClsInst], [FamInst]), -- ^ All instances and family instances created during -- this session. These are grabbed en masse after each -- update to be sure that proper overlapping is retained. -- That is, rather than re-check the overlapping each -- time we update the context, we just take the results -- from the instance code that already does that. ic_fix_env :: FixityEnv, -- ^ Fixities declared in let statements ic_default :: Maybe [Type], -- ^ The current default types, set by a 'default' declaration ic_resume :: [Resume], -- ^ The stack of breakpoint contexts ic_monad :: Name, -- ^ The monad that GHCi is executing in ic_int_print :: Name, -- ^ The function that is used for printing results -- of expressions in ghci and -e mode. ic_cwd :: Maybe FilePath -- virtual CWD of the program } data InteractiveImport = IIDecl (ImportDecl GhcPs) -- ^ Bring the exports of a particular module -- (filtered by an import decl) into scope | IIModule ModuleName -- ^ Bring into scope the entire top-level envt of -- of this module, including the things imported -- into it. -- | Constructs an empty InteractiveContext. emptyInteractiveContext :: DynFlags -> InteractiveContext emptyInteractiveContext dflags = InteractiveContext { ic_dflags = dflags, ic_imports = [], ic_rn_gbl_env = emptyGlobalRdrEnv, ic_mod_index = 1, ic_tythings = [], ic_instances = ([],[]), ic_fix_env = emptyNameEnv, ic_monad = ioTyConName, -- IO monad by default ic_int_print = printName, -- System.IO.print by default ic_default = Nothing, ic_resume = [], ic_cwd = Nothing } icInteractiveModule :: InteractiveContext -> Module icInteractiveModule (InteractiveContext { ic_mod_index = index }) = mkInteractiveModule index -- | This function returns the list of visible TyThings (useful for -- e.g. showBindings) icInScopeTTs :: InteractiveContext -> [TyThing] icInScopeTTs = ic_tythings -- | Get the PrintUnqualified function based on the flags and this InteractiveContext icPrintUnqual :: DynFlags -> InteractiveContext -> PrintUnqualified icPrintUnqual dflags InteractiveContext{ ic_rn_gbl_env = grenv } = mkPrintUnqualified dflags grenv -- | extendInteractiveContext is called with new TyThings recently defined to update the -- InteractiveContext to include them. Ids are easily removed when shadowed, -- but Classes and TyCons are not. Some work could be done to determine -- whether they are entirely shadowed, but as you could still have references -- to them (e.g. instances for classes or values of the type for TyCons), it's -- not clear whether removing them is even the appropriate behavior. extendInteractiveContext :: InteractiveContext -> [TyThing] -> [ClsInst] -> [FamInst] -> Maybe [Type] -> FixityEnv -> InteractiveContext extendInteractiveContext ictxt new_tythings new_cls_insts new_fam_insts defaults fix_env = ictxt { ic_mod_index = ic_mod_index ictxt + 1 -- Always bump this; even instances should create -- a new mod_index (Trac #9426) , ic_tythings = new_tythings ++ ic_tythings ictxt , ic_rn_gbl_env = ic_rn_gbl_env ictxt `icExtendGblRdrEnv` new_tythings , ic_instances = ( new_cls_insts ++ old_cls_insts , new_fam_insts ++ fam_insts ) -- we don't shadow old family instances (#7102), -- so don't need to remove them here , ic_default = defaults , ic_fix_env = fix_env -- See Note [Fixity declarations in GHCi] } where -- Discard old instances that have been fully overridden -- See Note [Override identical instances in GHCi] (cls_insts, fam_insts) = ic_instances ictxt old_cls_insts = filterOut (\i -> any (identicalClsInstHead i) new_cls_insts) cls_insts extendInteractiveContextWithIds :: InteractiveContext -> [Id] -> InteractiveContext -- Just a specialised version extendInteractiveContextWithIds ictxt new_ids | null new_ids = ictxt | otherwise = ictxt { ic_mod_index = ic_mod_index ictxt + 1 , ic_tythings = new_tythings ++ ic_tythings ictxt , ic_rn_gbl_env = ic_rn_gbl_env ictxt `icExtendGblRdrEnv` new_tythings } where new_tythings = map AnId new_ids setInteractivePackage :: HscEnv -> HscEnv -- Set the 'thisPackage' DynFlag to 'interactive' setInteractivePackage hsc_env = hsc_env { hsc_dflags = (hsc_dflags hsc_env) { thisInstalledUnitId = toInstalledUnitId interactiveUnitId } } setInteractivePrintName :: InteractiveContext -> Name -> InteractiveContext setInteractivePrintName ic n = ic{ic_int_print = n} -- ToDo: should not add Ids to the gbl env here -- | Add TyThings to the GlobalRdrEnv, earlier ones in the list shadowing -- later ones, and shadowing existing entries in the GlobalRdrEnv. icExtendGblRdrEnv :: GlobalRdrEnv -> [TyThing] -> GlobalRdrEnv icExtendGblRdrEnv env tythings = foldr add env tythings -- Foldr makes things in the front of -- the list shadow things at the back where -- One at a time, to ensure each shadows the previous ones add thing env | is_sub_bndr thing = env | otherwise = foldl extendGlobalRdrEnv env1 (concatMap localGREsFromAvail avail) where env1 = shadowNames env (concatMap availNames avail) avail = tyThingAvailInfo thing -- Ugh! The new_tythings may include record selectors, since they -- are not implicit-ids, and must appear in the TypeEnv. But they -- will also be brought into scope by the corresponding (ATyCon -- tc). And we want the latter, because that has the correct -- parent (Trac #10520) is_sub_bndr (AnId f) = case idDetails f of RecSelId {} -> True ClassOpId {} -> True _ -> False is_sub_bndr _ = False substInteractiveContext :: InteractiveContext -> TCvSubst -> InteractiveContext substInteractiveContext ictxt@InteractiveContext{ ic_tythings = tts } subst | isEmptyTCvSubst subst = ictxt | otherwise = ictxt { ic_tythings = map subst_ty tts } where subst_ty (AnId id) = AnId $ id `setIdType` substTyUnchecked subst (idType id) subst_ty tt = tt instance Outputable InteractiveImport where ppr (IIModule m) = char '*' <> ppr m ppr (IIDecl d) = ppr d {- ************************************************************************ * * Building a PrintUnqualified * * ************************************************************************ Note [Printing original names] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Deciding how to print names is pretty tricky. We are given a name P:M.T, where P is the package name, M is the defining module, and T is the occurrence name, and we have to decide in which form to display the name given a GlobalRdrEnv describing the current scope. Ideally we want to display the name in the form in which it is in scope. However, the name might not be in scope at all, and that's where it gets tricky. Here are the cases: 1. T uniquely maps to P:M.T ---> "T" NameUnqual 2. There is an X for which X.T uniquely maps to P:M.T ---> "X.T" NameQual X 3. There is no binding for "M.T" ---> "M.T" NameNotInScope1 4. Otherwise ---> "P:M.T" NameNotInScope2 (3) and (4) apply when the entity P:M.T is not in the GlobalRdrEnv at all. In these cases we still want to refer to the name as "M.T", *but* "M.T" might mean something else in the current scope (e.g. if there's an "import X as M"), so to avoid confusion we avoid using "M.T" if there's already a binding for it. Instead we write P:M.T. There's one further subtlety: in case (3), what if there are two things around, P1:M.T and P2:M.T? Then we don't want to print both of them as M.T! However only one of the modules P1:M and P2:M can be exposed (say P2), so we use M.T for that, and P1:M.T for the other one. This is handled by the qual_mod component of PrintUnqualified, inside the (ppr mod) of case (3), in Name.pprModulePrefix Note [Printing unit ids] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In the old days, original names were tied to PackageIds, which directly corresponded to the entities that users wrote in Cabal files, and were perfectly suitable for printing when we need to disambiguate packages. However, with UnitId, the situation can be different: if the key is instantiated with some holes, we should try to give the user some more useful information. -} -- | Creates some functions that work out the best ways to format -- names for the user according to a set of heuristics. mkPrintUnqualified :: DynFlags -> GlobalRdrEnv -> PrintUnqualified mkPrintUnqualified dflags env = QueryQualify qual_name (mkQualModule dflags) (mkQualPackage dflags) where qual_name mod occ | [gre] <- unqual_gres , right_name gre = NameUnqual -- If there's a unique entity that's in scope -- unqualified with 'occ' AND that entity is -- the right one, then we can use the unqualified name | [] <- unqual_gres , any is_name forceUnqualNames , not (isDerivedOccName occ) = NameUnqual -- Don't qualify names that come from modules -- that come with GHC, often appear in error messages, -- but aren't typically in scope. Doing this does not -- cause ambiguity, and it reduces the amount of -- qualification in error messages thus improving -- readability. -- -- A motivating example is 'Constraint'. It's often not -- in scope, but printing GHC.Prim.Constraint seems -- overkill. | [gre] <- qual_gres = NameQual (greQualModName gre) | null qual_gres = if null (lookupGRE_RdrName (mkRdrQual (moduleName mod) occ) env) then NameNotInScope1 else NameNotInScope2 | otherwise = NameNotInScope1 -- Can happen if 'f' is bound twice in the module -- Eg f = True; g = 0; f = False where is_name :: Name -> Bool is_name name = ASSERT2( isExternalName name, ppr name ) nameModule name == mod && nameOccName name == occ forceUnqualNames :: [Name] forceUnqualNames = map tyConName [ constraintKindTyCon, heqTyCon, coercibleTyCon , starKindTyCon, unicodeStarKindTyCon ] ++ [ eqTyConName ] right_name gre = nameModule_maybe (gre_name gre) == Just mod unqual_gres = lookupGRE_RdrName (mkRdrUnqual occ) env qual_gres = filter right_name (lookupGlobalRdrEnv env occ) -- we can mention a module P:M without the P: qualifier iff -- "import M" would resolve unambiguously to P:M. (if P is the -- current package we can just assume it is unqualified). -- | Creates a function for formatting modules based on two heuristics: -- (1) if the module is the current module, don't qualify, and (2) if there -- is only one exposed package which exports this module, don't qualify. mkQualModule :: DynFlags -> QueryQualifyModule mkQualModule dflags mod | moduleUnitId mod == thisPackage dflags = False | [(_, pkgconfig)] <- lookup, packageConfigId pkgconfig == moduleUnitId mod -- this says: we are given a module P:M, is there just one exposed package -- that exposes a module M, and is it package P? = False | otherwise = True where lookup = lookupModuleInAllPackages dflags (moduleName mod) -- | Creates a function for formatting packages based on two heuristics: -- (1) don't qualify if the package in question is "main", and (2) only qualify -- with a unit id if the package ID would be ambiguous. mkQualPackage :: DynFlags -> QueryQualifyPackage mkQualPackage dflags pkg_key | pkg_key == mainUnitId || pkg_key == interactiveUnitId -- Skip the lookup if it's main, since it won't be in the package -- database! = False | Just pkgid <- mb_pkgid , searchPackageId dflags pkgid `lengthIs` 1 -- this says: we are given a package pkg-0.1@MMM, are there only one -- exposed packages whose package ID is pkg-0.1? = False | otherwise = True where mb_pkgid = fmap sourcePackageId (lookupPackage dflags pkg_key) -- | A function which only qualifies package names if necessary; but -- qualifies all other identifiers. pkgQual :: DynFlags -> PrintUnqualified pkgQual dflags = alwaysQualify { queryQualifyPackage = mkQualPackage dflags } {- ************************************************************************ * * Implicit TyThings * * ************************************************************************ Note [Implicit TyThings] ~~~~~~~~~~~~~~~~~~~~~~~~ DEFINITION: An "implicit" TyThing is one that does not have its own IfaceDecl in an interface file. Instead, its binding in the type environment is created as part of typechecking the IfaceDecl for some other thing. Examples: * All DataCons are implicit, because they are generated from the IfaceDecl for the data/newtype. Ditto class methods. * Record selectors are *not* implicit, because they get their own free-standing IfaceDecl. * Associated data/type families are implicit because they are included in the IfaceDecl of the parent class. (NB: the IfaceClass decl happens to use IfaceDecl recursively for the associated types, but that's irrelevant here.) * Dictionary function Ids are not implicit. * Axioms for newtypes are implicit (same as above), but axioms for data/type family instances are *not* implicit (like DFunIds). -} -- | Determine the 'TyThing's brought into scope by another 'TyThing' -- /other/ than itself. For example, Id's don't have any implicit TyThings -- as they just bring themselves into scope, but classes bring their -- dictionary datatype, type constructor and some selector functions into -- scope, just for a start! -- N.B. the set of TyThings returned here *must* match the set of -- names returned by LoadIface.ifaceDeclImplicitBndrs, in the sense that -- TyThing.getOccName should define a bijection between the two lists. -- This invariant is used in LoadIface.loadDecl (see note [Tricky iface loop]) -- The order of the list does not matter. implicitTyThings :: TyThing -> [TyThing] implicitTyThings (AnId _) = [] implicitTyThings (ACoAxiom _cc) = [] implicitTyThings (ATyCon tc) = implicitTyConThings tc implicitTyThings (AConLike cl) = implicitConLikeThings cl implicitConLikeThings :: ConLike -> [TyThing] implicitConLikeThings (RealDataCon dc) = dataConImplicitTyThings dc implicitConLikeThings (PatSynCon {}) = [] -- Pattern synonyms have no implicit Ids; the wrapper and matcher -- are not "implicit"; they are simply new top-level bindings, -- and they have their own declaration in an interface file -- Unless a record pat syn when there are implicit selectors -- They are still not included here as `implicitConLikeThings` is -- used by `tcTyClsDecls` whilst pattern synonyms are typed checked -- by `tcTopValBinds`. implicitClassThings :: Class -> [TyThing] implicitClassThings cl = -- Does not include default methods, because those Ids may have -- their own pragmas, unfoldings etc, not derived from the Class object -- associated types -- No recursive call for the classATs, because they -- are only the family decls; they have no implicit things map ATyCon (classATs cl) ++ -- superclass and operation selectors map AnId (classAllSelIds cl) implicitTyConThings :: TyCon -> [TyThing] implicitTyConThings tc = class_stuff ++ -- fields (names of selectors) -- (possibly) implicit newtype axioms -- or type family axioms implicitCoTyCon tc ++ -- for each data constructor in order, -- the constructor, worker, and (possibly) wrapper [ thing | dc <- tyConDataCons tc , thing <- AConLike (RealDataCon dc) : dataConImplicitTyThings dc ] -- NB. record selectors are *not* implicit, they have fully-fledged -- bindings that pass through the compilation pipeline as normal. where class_stuff = case tyConClass_maybe tc of Nothing -> [] Just cl -> implicitClassThings cl -- For newtypes and closed type families (only) add the implicit coercion tycon implicitCoTyCon :: TyCon -> [TyThing] implicitCoTyCon tc | Just co <- newTyConCo_maybe tc = [ACoAxiom $ toBranchedAxiom co] | Just co <- isClosedSynFamilyTyConWithAxiom_maybe tc = [ACoAxiom co] | otherwise = [] -- | Returns @True@ if there should be no interface-file declaration -- for this thing on its own: either it is built-in, or it is part -- of some other declaration, or it is generated implicitly by some -- other declaration. isImplicitTyThing :: TyThing -> Bool isImplicitTyThing (AConLike cl) = case cl of RealDataCon {} -> True PatSynCon {} -> False isImplicitTyThing (AnId id) = isImplicitId id isImplicitTyThing (ATyCon tc) = isImplicitTyCon tc isImplicitTyThing (ACoAxiom ax) = isImplicitCoAxiom ax -- | tyThingParent_maybe x returns (Just p) -- when pprTyThingInContext should print a declaration for p -- (albeit with some "..." in it) when asked to show x -- It returns the *immediate* parent. So a datacon returns its tycon -- but the tycon could be the associated type of a class, so it in turn -- might have a parent. tyThingParent_maybe :: TyThing -> Maybe TyThing tyThingParent_maybe (AConLike cl) = case cl of RealDataCon dc -> Just (ATyCon (dataConTyCon dc)) PatSynCon{} -> Nothing tyThingParent_maybe (ATyCon tc) = case tyConAssoc_maybe tc of Just cls -> Just (ATyCon (classTyCon cls)) Nothing -> Nothing tyThingParent_maybe (AnId id) = case idDetails id of RecSelId { sel_tycon = RecSelData tc } -> Just (ATyCon tc) ClassOpId cls -> Just (ATyCon (classTyCon cls)) _other -> Nothing tyThingParent_maybe _other = Nothing tyThingsTyCoVars :: [TyThing] -> TyCoVarSet tyThingsTyCoVars tts = unionVarSets $ map ttToVarSet tts where ttToVarSet (AnId id) = tyCoVarsOfType $ idType id ttToVarSet (AConLike cl) = case cl of RealDataCon dc -> tyCoVarsOfType $ dataConRepType dc PatSynCon{} -> emptyVarSet ttToVarSet (ATyCon tc) = case tyConClass_maybe tc of Just cls -> (mkVarSet . fst . classTvsFds) cls Nothing -> tyCoVarsOfType $ tyConKind tc ttToVarSet (ACoAxiom _) = emptyVarSet -- | The Names that a TyThing should bring into scope. Used to build -- the GlobalRdrEnv for the InteractiveContext. tyThingAvailInfo :: TyThing -> [AvailInfo] tyThingAvailInfo (ATyCon t) = case tyConClass_maybe t of Just c -> [AvailTC n (n : map getName (classMethods c) ++ map getName (classATs c)) [] ] where n = getName c Nothing -> [AvailTC n (n : map getName dcs) flds] where n = getName t dcs = tyConDataCons t flds = tyConFieldLabels t tyThingAvailInfo (AConLike (PatSynCon p)) = map avail ((getName p) : map flSelector (patSynFieldLabels p)) tyThingAvailInfo t = [avail (getName t)] {- ************************************************************************ * * TypeEnv * * ************************************************************************ -} -- | A map from 'Name's to 'TyThing's, constructed by typechecking -- local declarations or interface files type TypeEnv = NameEnv TyThing emptyTypeEnv :: TypeEnv typeEnvElts :: TypeEnv -> [TyThing] typeEnvTyCons :: TypeEnv -> [TyCon] typeEnvCoAxioms :: TypeEnv -> [CoAxiom Branched] typeEnvIds :: TypeEnv -> [Id] typeEnvPatSyns :: TypeEnv -> [PatSyn] typeEnvDataCons :: TypeEnv -> [DataCon] typeEnvClasses :: TypeEnv -> [Class] lookupTypeEnv :: TypeEnv -> Name -> Maybe TyThing emptyTypeEnv = emptyNameEnv typeEnvElts env = nameEnvElts env typeEnvTyCons env = [tc | ATyCon tc <- typeEnvElts env] typeEnvCoAxioms env = [ax | ACoAxiom ax <- typeEnvElts env] typeEnvIds env = [id | AnId id <- typeEnvElts env] typeEnvPatSyns env = [ps | AConLike (PatSynCon ps) <- typeEnvElts env] typeEnvDataCons env = [dc | AConLike (RealDataCon dc) <- typeEnvElts env] typeEnvClasses env = [cl | tc <- typeEnvTyCons env, Just cl <- [tyConClass_maybe tc]] mkTypeEnv :: [TyThing] -> TypeEnv mkTypeEnv things = extendTypeEnvList emptyTypeEnv things mkTypeEnvWithImplicits :: [TyThing] -> TypeEnv mkTypeEnvWithImplicits things = mkTypeEnv things `plusNameEnv` mkTypeEnv (concatMap implicitTyThings things) typeEnvFromEntities :: [Id] -> [TyCon] -> [FamInst] -> TypeEnv typeEnvFromEntities ids tcs famInsts = mkTypeEnv ( map AnId ids ++ map ATyCon all_tcs ++ concatMap implicitTyConThings all_tcs ++ map (ACoAxiom . toBranchedAxiom . famInstAxiom) famInsts ) where all_tcs = tcs ++ famInstsRepTyCons famInsts lookupTypeEnv = lookupNameEnv -- Extend the type environment extendTypeEnv :: TypeEnv -> TyThing -> TypeEnv extendTypeEnv env thing = extendNameEnv env (getName thing) thing extendTypeEnvList :: TypeEnv -> [TyThing] -> TypeEnv extendTypeEnvList env things = foldl extendTypeEnv env things extendTypeEnvWithIds :: TypeEnv -> [Id] -> TypeEnv extendTypeEnvWithIds env ids = extendNameEnvList env [(getName id, AnId id) | id <- ids] plusTypeEnv :: TypeEnv -> TypeEnv -> TypeEnv plusTypeEnv env1 env2 = plusNameEnv env1 env2 -- | Find the 'TyThing' for the given 'Name' by using all the resources -- at our disposal: the compiled modules in the 'HomePackageTable' and the -- compiled modules in other packages that live in 'PackageTypeEnv'. Note -- that this does NOT look up the 'TyThing' in the module being compiled: you -- have to do that yourself, if desired lookupType :: DynFlags -> HomePackageTable -> PackageTypeEnv -> Name -> Maybe TyThing lookupType dflags hpt pte name | isOneShot (ghcMode dflags) -- in one-shot, we don't use the HPT = lookupNameEnv pte name | otherwise = case lookupHptByModule hpt mod of Just hm -> lookupNameEnv (md_types (hm_details hm)) name Nothing -> lookupNameEnv pte name where mod = ASSERT2( isExternalName name, ppr name ) if isHoleName name then mkModule (thisPackage dflags) (moduleName (nameModule name)) else nameModule name -- | As 'lookupType', but with a marginally easier-to-use interface -- if you have a 'HscEnv' lookupTypeHscEnv :: HscEnv -> Name -> IO (Maybe TyThing) lookupTypeHscEnv hsc_env name = do eps <- readIORef (hsc_EPS hsc_env) return $! lookupType dflags hpt (eps_PTE eps) name where dflags = hsc_dflags hsc_env hpt = hsc_HPT hsc_env -- | Get the 'TyCon' from a 'TyThing' if it is a type constructor thing. Panics otherwise tyThingTyCon :: TyThing -> TyCon tyThingTyCon (ATyCon tc) = tc tyThingTyCon other = pprPanic "tyThingTyCon" (ppr other) -- | Get the 'CoAxiom' from a 'TyThing' if it is a coercion axiom thing. Panics otherwise tyThingCoAxiom :: TyThing -> CoAxiom Branched tyThingCoAxiom (ACoAxiom ax) = ax tyThingCoAxiom other = pprPanic "tyThingCoAxiom" (ppr other) -- | Get the 'DataCon' from a 'TyThing' if it is a data constructor thing. Panics otherwise tyThingDataCon :: TyThing -> DataCon tyThingDataCon (AConLike (RealDataCon dc)) = dc tyThingDataCon other = pprPanic "tyThingDataCon" (ppr other) -- | Get the 'ConLike' from a 'TyThing' if it is a data constructor thing. -- Panics otherwise tyThingConLike :: TyThing -> ConLike tyThingConLike (AConLike dc) = dc tyThingConLike other = pprPanic "tyThingConLike" (ppr other) -- | Get the 'Id' from a 'TyThing' if it is a id *or* data constructor thing. Panics otherwise tyThingId :: TyThing -> Id tyThingId (AnId id) = id tyThingId (AConLike (RealDataCon dc)) = dataConWrapId dc tyThingId other = pprPanic "tyThingId" (ppr other) {- ************************************************************************ * * \subsection{MonadThings and friends} * * ************************************************************************ -} -- | Class that abstracts out the common ability of the monads in GHC -- to lookup a 'TyThing' in the monadic environment by 'Name'. Provides -- a number of related convenience functions for accessing particular -- kinds of 'TyThing' class Monad m => MonadThings m where lookupThing :: Name -> m TyThing lookupId :: Name -> m Id lookupId = liftM tyThingId . lookupThing lookupDataCon :: Name -> m DataCon lookupDataCon = liftM tyThingDataCon . lookupThing lookupTyCon :: Name -> m TyCon lookupTyCon = liftM tyThingTyCon . lookupThing {- ************************************************************************ * * \subsection{Auxiliary types} * * ************************************************************************ These types are defined here because they are mentioned in ModDetails, but they are mostly elaborated elsewhere -} ------------------ Warnings ------------------------- -- | Warning information for a module data Warnings = NoWarnings -- ^ Nothing deprecated | WarnAll WarningTxt -- ^ Whole module deprecated | WarnSome [(OccName,WarningTxt)] -- ^ Some specific things deprecated -- Only an OccName is needed because -- (1) a deprecation always applies to a binding -- defined in the module in which the deprecation appears. -- (2) deprecations are only reported outside the defining module. -- this is important because, otherwise, if we saw something like -- -- {-# DEPRECATED f "" #-} -- f = ... -- h = f -- g = let f = undefined in f -- -- we'd need more information than an OccName to know to say something -- about the use of f in h but not the use of the locally bound f in g -- -- however, because we only report about deprecations from the outside, -- and a module can only export one value called f, -- an OccName suffices. -- -- this is in contrast with fixity declarations, where we need to map -- a Name to its fixity declaration. deriving( Eq ) instance Binary Warnings where put_ bh NoWarnings = putByte bh 0 put_ bh (WarnAll t) = do putByte bh 1 put_ bh t put_ bh (WarnSome ts) = do putByte bh 2 put_ bh ts get bh = do h <- getByte bh case h of 0 -> return NoWarnings 1 -> do aa <- get bh return (WarnAll aa) _ -> do aa <- get bh return (WarnSome aa) -- | Constructs the cache for the 'mi_warn_fn' field of a 'ModIface' mkIfaceWarnCache :: Warnings -> OccName -> Maybe WarningTxt mkIfaceWarnCache NoWarnings = \_ -> Nothing mkIfaceWarnCache (WarnAll t) = \_ -> Just t mkIfaceWarnCache (WarnSome pairs) = lookupOccEnv (mkOccEnv pairs) emptyIfaceWarnCache :: OccName -> Maybe WarningTxt emptyIfaceWarnCache _ = Nothing plusWarns :: Warnings -> Warnings -> Warnings plusWarns d NoWarnings = d plusWarns NoWarnings d = d plusWarns _ (WarnAll t) = WarnAll t plusWarns (WarnAll t) _ = WarnAll t plusWarns (WarnSome v1) (WarnSome v2) = WarnSome (v1 ++ v2) -- | Creates cached lookup for the 'mi_fix_fn' field of 'ModIface' mkIfaceFixCache :: [(OccName, Fixity)] -> OccName -> Maybe Fixity mkIfaceFixCache pairs = \n -> lookupOccEnv env n where env = mkOccEnv pairs emptyIfaceFixCache :: OccName -> Maybe Fixity emptyIfaceFixCache _ = Nothing -- | Fixity environment mapping names to their fixities type FixityEnv = NameEnv FixItem -- | Fixity information for an 'Name'. We keep the OccName in the range -- so that we can generate an interface from it data FixItem = FixItem OccName Fixity instance Outputable FixItem where ppr (FixItem occ fix) = ppr fix <+> ppr occ emptyFixityEnv :: FixityEnv emptyFixityEnv = emptyNameEnv lookupFixity :: FixityEnv -> Name -> Fixity lookupFixity env n = case lookupNameEnv env n of Just (FixItem _ fix) -> fix Nothing -> defaultFixity {- ************************************************************************ * * \subsection{WhatsImported} * * ************************************************************************ -} -- | Records whether a module has orphans. An \"orphan\" is one of: -- -- * An instance declaration in a module other than the definition -- module for one of the type constructors or classes in the instance head -- -- * A transformation rule in a module other than the one defining -- the function in the head of the rule -- -- * A vectorisation pragma type WhetherHasOrphans = Bool -- | Does this module define family instances? type WhetherHasFamInst = Bool -- | Did this module originate from a *-boot file? type IsBootInterface = Bool -- | Dependency information about ALL modules and packages below this one -- in the import hierarchy. -- -- Invariant: the dependencies of a module @M@ never includes @M@. -- -- Invariant: none of the lists contain duplicates. data Dependencies = Deps { dep_mods :: [(ModuleName, IsBootInterface)] -- ^ All home-package modules transitively below this one -- I.e. modules that this one imports, or that are in the -- dep_mods of those directly-imported modules , dep_pkgs :: [(InstalledUnitId, Bool)] -- ^ All packages transitively below this module -- I.e. packages to which this module's direct imports belong, -- or that are in the dep_pkgs of those modules -- The bool indicates if the package is required to be -- trusted when the module is imported as a safe import -- (Safe Haskell). See Note [RnNames . Tracking Trust Transitively] , dep_orphs :: [Module] -- ^ Transitive closure of orphan modules (whether -- home or external pkg). -- -- (Possible optimization: don't include family -- instance orphans as they are anyway included in -- 'dep_finsts'. But then be careful about code -- which relies on dep_orphs having the complete list!) -- This does NOT include us, unlike 'imp_orphs'. , dep_finsts :: [Module] -- ^ Transitive closure of depended upon modules which -- contain family instances (whether home or external). -- This is used by 'checkFamInstConsistency'. This -- does NOT include us, unlike 'imp_finsts'. See Note -- [The type family instance consistency story]. } deriving( Eq ) -- Equality used only for old/new comparison in MkIface.addFingerprints -- See 'TcRnTypes.ImportAvails' for details on dependencies. instance Binary Dependencies where put_ bh deps = do put_ bh (dep_mods deps) put_ bh (dep_pkgs deps) put_ bh (dep_orphs deps) put_ bh (dep_finsts deps) get bh = do ms <- get bh ps <- get bh os <- get bh fis <- get bh return (Deps { dep_mods = ms, dep_pkgs = ps, dep_orphs = os, dep_finsts = fis }) noDependencies :: Dependencies noDependencies = Deps [] [] [] [] -- | Records modules for which changes may force recompilation of this module -- See wiki: http://ghc.haskell.org/trac/ghc/wiki/Commentary/Compiler/RecompilationAvoidance -- -- This differs from Dependencies. A module X may be in the dep_mods of this -- module (via an import chain) but if we don't use anything from X it won't -- appear in our Usage data Usage -- | Module from another package = UsagePackageModule { usg_mod :: Module, -- ^ External package module depended on usg_mod_hash :: Fingerprint, -- ^ Cached module fingerprint usg_safe :: IsSafeImport -- ^ Was this module imported as a safe import } -- | Module from the current package | UsageHomeModule { usg_mod_name :: ModuleName, -- ^ Name of the module usg_mod_hash :: Fingerprint, -- ^ Cached module fingerprint usg_entities :: [(OccName,Fingerprint)], -- ^ Entities we depend on, sorted by occurrence name and fingerprinted. -- NB: usages are for parent names only, e.g. type constructors -- but not the associated data constructors. usg_exports :: Maybe Fingerprint, -- ^ Fingerprint for the export list of this module, -- if we directly imported it (and hence we depend on its export list) usg_safe :: IsSafeImport -- ^ Was this module imported as a safe import } -- ^ Module from the current package -- | A file upon which the module depends, e.g. a CPP #include, or using TH's -- 'addDependentFile' | UsageFile { usg_file_path :: FilePath, -- ^ External file dependency. From a CPP #include or TH -- addDependentFile. Should be absolute. usg_file_hash :: Fingerprint -- ^ 'Fingerprint' of the file contents. -- Note: We don't consider things like modification timestamps -- here, because there's no reason to recompile if the actual -- contents don't change. This previously lead to odd -- recompilation behaviors; see #8114 } -- | A requirement which was merged into this one. | UsageMergedRequirement { usg_mod :: Module, usg_mod_hash :: Fingerprint } deriving( Eq ) -- The export list field is (Just v) if we depend on the export list: -- i.e. we imported the module directly, whether or not we -- enumerated the things we imported, or just imported -- everything -- We need to recompile if M's exports change, because -- if the import was import M, we might now have a name clash -- in the importing module. -- if the import was import M(x) M might no longer export x -- The only way we don't depend on the export list is if we have -- import M() -- And of course, for modules that aren't imported directly we don't -- depend on their export lists instance Binary Usage where put_ bh usg@UsagePackageModule{} = do putByte bh 0 put_ bh (usg_mod usg) put_ bh (usg_mod_hash usg) put_ bh (usg_safe usg) put_ bh usg@UsageHomeModule{} = do putByte bh 1 put_ bh (usg_mod_name usg) put_ bh (usg_mod_hash usg) put_ bh (usg_exports usg) put_ bh (usg_entities usg) put_ bh (usg_safe usg) put_ bh usg@UsageFile{} = do putByte bh 2 put_ bh (usg_file_path usg) put_ bh (usg_file_hash usg) put_ bh usg@UsageMergedRequirement{} = do putByte bh 3 put_ bh (usg_mod usg) put_ bh (usg_mod_hash usg) get bh = do h <- getByte bh case h of 0 -> do nm <- get bh mod <- get bh safe <- get bh return UsagePackageModule { usg_mod = nm, usg_mod_hash = mod, usg_safe = safe } 1 -> do nm <- get bh mod <- get bh exps <- get bh ents <- get bh safe <- get bh return UsageHomeModule { usg_mod_name = nm, usg_mod_hash = mod, usg_exports = exps, usg_entities = ents, usg_safe = safe } 2 -> do fp <- get bh hash <- get bh return UsageFile { usg_file_path = fp, usg_file_hash = hash } 3 -> do mod <- get bh hash <- get bh return UsageMergedRequirement { usg_mod = mod, usg_mod_hash = hash } i -> error ("Binary.get(Usage): " ++ show i) {- ************************************************************************ * * The External Package State * * ************************************************************************ -} type PackageTypeEnv = TypeEnv type PackageRuleBase = RuleBase type PackageInstEnv = InstEnv type PackageFamInstEnv = FamInstEnv type PackageVectInfo = VectInfo type PackageAnnEnv = AnnEnv type PackageCompleteMatchMap = CompleteMatchMap -- | Information about other packages that we have slurped in by reading -- their interface files data ExternalPackageState = EPS { eps_is_boot :: !(ModuleNameEnv (ModuleName, IsBootInterface)), -- ^ In OneShot mode (only), home-package modules -- accumulate in the external package state, and are -- sucked in lazily. For these home-pkg modules -- (only) we need to record which are boot modules. -- We set this field after loading all the -- explicitly-imported interfaces, but before doing -- anything else -- -- The 'ModuleName' part is not necessary, but it's useful for -- debug prints, and it's convenient because this field comes -- direct from 'TcRnTypes.imp_dep_mods' eps_PIT :: !PackageIfaceTable, -- ^ The 'ModIface's for modules in external packages -- whose interfaces we have opened. -- The declarations in these interface files are held in the -- 'eps_decls', 'eps_inst_env', 'eps_fam_inst_env' and 'eps_rules' -- fields of this record, not in the 'mi_decls' fields of the -- interface we have sucked in. -- -- What /is/ in the PIT is: -- -- * The Module -- -- * Fingerprint info -- -- * Its exports -- -- * Fixities -- -- * Deprecations and warnings eps_free_holes :: InstalledModuleEnv (UniqDSet ModuleName), -- ^ Cache for 'mi_free_holes'. Ordinarily, we can rely on -- the 'eps_PIT' for this information, EXCEPT that when -- we do dependency analysis, we need to look at the -- 'Dependencies' of our imports to determine what their -- precise free holes are ('moduleFreeHolesPrecise'). We -- don't want to repeatedly reread in the interface -- for every import, so cache it here. When the PIT -- gets filled in we can drop these entries. eps_PTE :: !PackageTypeEnv, -- ^ Result of typechecking all the external package -- interface files we have sucked in. The domain of -- the mapping is external-package modules eps_inst_env :: !PackageInstEnv, -- ^ The total 'InstEnv' accumulated -- from all the external-package modules eps_fam_inst_env :: !PackageFamInstEnv,-- ^ The total 'FamInstEnv' accumulated -- from all the external-package modules eps_rule_base :: !PackageRuleBase, -- ^ The total 'RuleEnv' accumulated -- from all the external-package modules eps_vect_info :: !PackageVectInfo, -- ^ The total 'VectInfo' accumulated -- from all the external-package modules eps_ann_env :: !PackageAnnEnv, -- ^ The total 'AnnEnv' accumulated -- from all the external-package modules eps_complete_matches :: !PackageCompleteMatchMap, -- ^ The total 'CompleteMatchMap' accumulated -- from all the external-package modules eps_mod_fam_inst_env :: !(ModuleEnv FamInstEnv), -- ^ The family instances accumulated from external -- packages, keyed off the module that declared them eps_stats :: !EpsStats -- ^ Stastics about what was loaded from external packages } -- | Accumulated statistics about what we are putting into the 'ExternalPackageState'. -- \"In\" means stuff that is just /read/ from interface files, -- \"Out\" means actually sucked in and type-checked data EpsStats = EpsStats { n_ifaces_in , n_decls_in, n_decls_out , n_rules_in, n_rules_out , n_insts_in, n_insts_out :: !Int } addEpsInStats :: EpsStats -> Int -> Int -> Int -> EpsStats -- ^ Add stats for one newly-read interface addEpsInStats stats n_decls n_insts n_rules = stats { n_ifaces_in = n_ifaces_in stats + 1 , n_decls_in = n_decls_in stats + n_decls , n_insts_in = n_insts_in stats + n_insts , n_rules_in = n_rules_in stats + n_rules } {- Names in a NameCache are always stored as a Global, and have the SrcLoc of their binding locations. Actually that's not quite right. When we first encounter the original name, we might not be at its binding site (e.g. we are reading an interface file); so we give it 'noSrcLoc' then. Later, when we find its binding site, we fix it up. -} updNameCacheIO :: HscEnv -> (NameCache -> (NameCache, c)) -- The updating function -> IO c updNameCacheIO hsc_env upd_fn = atomicModifyIORef' (hsc_NC hsc_env) upd_fn mkSOName :: Platform -> FilePath -> FilePath mkSOName platform root = case platformOS platform of OSMinGW32 -> root <.> soExt platform _ -> ("lib" ++ root) <.> soExt platform mkHsSOName :: Platform -> FilePath -> FilePath mkHsSOName platform root = ("lib" ++ root) <.> soExt platform soExt :: Platform -> FilePath soExt platform = case platformOS platform of OSDarwin -> "dylib" OSMinGW32 -> "dll" _ -> "so" {- ************************************************************************ * * The module graph and ModSummary type A ModSummary is a node in the compilation manager's dependency graph, and it's also passed to hscMain * * ************************************************************************ -} -- | A ModuleGraph contains all the nodes from the home package (only). -- There will be a node for each source module, plus a node for each hi-boot -- module. -- -- The graph is not necessarily stored in topologically-sorted order. Use -- 'GHC.topSortModuleGraph' and 'Digraph.flattenSCC' to achieve this. data ModuleGraph = ModuleGraph { mg_mss :: [ModSummary] , mg_non_boot :: ModuleEnv ModSummary -- a map of all non-boot ModSummaries keyed by Modules , mg_boot :: ModuleSet -- a set of boot Modules , mg_needs_th_or_qq :: !Bool -- does any of the modules in mg_mss require TemplateHaskell or -- QuasiQuotes? } -- | Determines whether a set of modules requires Template Haskell or -- Quasi Quotes -- -- Note that if the session's 'DynFlags' enabled Template Haskell when -- 'depanal' was called, then each module in the returned module graph will -- have Template Haskell enabled whether it is actually needed or not. needsTemplateHaskellOrQQ :: ModuleGraph -> Bool needsTemplateHaskellOrQQ mg = mg_needs_th_or_qq mg -- | Map a function 'f' over all the 'ModSummaries'. -- To preserve invariants 'f' can't change the isBoot status. mapMG :: (ModSummary -> ModSummary) -> ModuleGraph -> ModuleGraph mapMG f mg@ModuleGraph{..} = mg { mg_mss = map f mg_mss , mg_non_boot = mapModuleEnv f mg_non_boot } mgBootModules :: ModuleGraph -> ModuleSet mgBootModules ModuleGraph{..} = mg_boot mgModSummaries :: ModuleGraph -> [ModSummary] mgModSummaries = mg_mss mgElemModule :: ModuleGraph -> Module -> Bool mgElemModule ModuleGraph{..} m = elemModuleEnv m mg_non_boot -- | Look up a ModSummary in the ModuleGraph mgLookupModule :: ModuleGraph -> Module -> Maybe ModSummary mgLookupModule ModuleGraph{..} m = lookupModuleEnv mg_non_boot m emptyMG :: ModuleGraph emptyMG = ModuleGraph [] emptyModuleEnv emptyModuleSet False isTemplateHaskellOrQQNonBoot :: ModSummary -> Bool isTemplateHaskellOrQQNonBoot ms = (xopt LangExt.TemplateHaskell (ms_hspp_opts ms) || xopt LangExt.QuasiQuotes (ms_hspp_opts ms)) && not (isBootSummary ms) -- | Add a ModSummary to ModuleGraph. Assumes that the new ModSummary is -- not an element of the ModuleGraph. extendMG :: ModuleGraph -> ModSummary -> ModuleGraph extendMG ModuleGraph{..} ms = ModuleGraph { mg_mss = ms:mg_mss , mg_non_boot = if isBootSummary ms then mg_non_boot else extendModuleEnv mg_non_boot (ms_mod ms) ms , mg_boot = if isBootSummary ms then extendModuleSet mg_boot (ms_mod ms) else mg_boot , mg_needs_th_or_qq = mg_needs_th_or_qq || isTemplateHaskellOrQQNonBoot ms } mkModuleGraph :: [ModSummary] -> ModuleGraph mkModuleGraph = foldr (flip extendMG) emptyMG -- | A single node in a 'ModuleGraph'. The nodes of the module graph -- are one of: -- -- * A regular Haskell source module -- * A hi-boot source module -- data ModSummary = ModSummary { ms_mod :: Module, -- ^ Identity of the module ms_hsc_src :: HscSource, -- ^ The module source either plain Haskell or hs-boot ms_location :: ModLocation, -- ^ Location of the various files belonging to the module ms_hs_date :: UTCTime, -- ^ Timestamp of source file ms_obj_date :: Maybe UTCTime, -- ^ Timestamp of object, if we have one ms_iface_date :: Maybe UTCTime, -- ^ Timestamp of hi file, if we *only* are typechecking (it is -- 'Nothing' otherwise. -- See Note [Recompilation checking in -fno-code mode] and #9243 ms_srcimps :: [(Maybe FastString, Located ModuleName)], -- ^ Source imports of the module ms_textual_imps :: [(Maybe FastString, Located ModuleName)], -- ^ Non-source imports of the module from the module *text* ms_parsed_mod :: Maybe HsParsedModule, -- ^ The parsed, nonrenamed source, if we have it. This is also -- used to support "inline module syntax" in Backpack files. ms_hspp_file :: FilePath, -- ^ Filename of preprocessed source file ms_hspp_opts :: DynFlags, -- ^ Cached flags from @OPTIONS@, @INCLUDE@ and @LANGUAGE@ -- pragmas in the modules source code ms_hspp_buf :: Maybe StringBuffer -- ^ The actual preprocessed source, if we have it } ms_installed_mod :: ModSummary -> InstalledModule ms_installed_mod = fst . splitModuleInsts . ms_mod ms_mod_name :: ModSummary -> ModuleName ms_mod_name = moduleName . ms_mod ms_imps :: ModSummary -> [(Maybe FastString, Located ModuleName)] ms_imps ms = ms_textual_imps ms ++ map mk_additional_import (dynFlagDependencies (ms_hspp_opts ms)) where mk_additional_import mod_nm = (Nothing, noLoc mod_nm) -- The ModLocation contains both the original source filename and the -- filename of the cleaned-up source file after all preprocessing has been -- done. The point is that the summariser will have to cpp/unlit/whatever -- all files anyway, and there's no point in doing this twice -- just -- park the result in a temp file, put the name of it in the location, -- and let @compile@ read from that file on the way back up. -- The ModLocation is stable over successive up-sweeps in GHCi, wheres -- the ms_hs_date and imports can, of course, change msHsFilePath, msHiFilePath, msObjFilePath :: ModSummary -> FilePath msHsFilePath ms = expectJust "msHsFilePath" (ml_hs_file (ms_location ms)) msHiFilePath ms = ml_hi_file (ms_location ms) msObjFilePath ms = ml_obj_file (ms_location ms) -- | Did this 'ModSummary' originate from a hs-boot file? isBootSummary :: ModSummary -> Bool isBootSummary ms = ms_hsc_src ms == HsBootFile instance Outputable ModSummary where ppr ms = sep [text "ModSummary {", nest 3 (sep [text "ms_hs_date = " <> text (show (ms_hs_date ms)), text "ms_mod =" <+> ppr (ms_mod ms) <> text (hscSourceString (ms_hsc_src ms)) <> comma, text "ms_textual_imps =" <+> ppr (ms_textual_imps ms), text "ms_srcimps =" <+> ppr (ms_srcimps ms)]), char '}' ] showModMsg :: DynFlags -> HscTarget -> Bool -> ModSummary -> String showModMsg dflags target recomp mod_summary = showSDoc dflags $ if gopt Opt_HideSourcePaths dflags then text mod_str else hsep [ text (mod_str ++ replicate (max 0 (16 - length mod_str)) ' ') , char '(' , text (op $ msHsFilePath mod_summary) <> char ',' , case target of HscInterpreted | recomp -> text "interpreted" HscNothing -> text "nothing" _ -> text (op $ msObjFilePath mod_summary) , char ')' ] where op = normalise mod = moduleName (ms_mod mod_summary) mod_str = showPpr dflags mod ++ hscSourceString (ms_hsc_src mod_summary) {- ************************************************************************ * * \subsection{Recmpilation} * * ************************************************************************ -} -- | Indicates whether a given module's source has been modified since it -- was last compiled. data SourceModified = SourceModified -- ^ the source has been modified | SourceUnmodified -- ^ the source has not been modified. Compilation may or may -- not be necessary, depending on whether any dependencies have -- changed since we last compiled. | SourceUnmodifiedAndStable -- ^ the source has not been modified, and furthermore all of -- its (transitive) dependencies are up to date; it definitely -- does not need to be recompiled. This is important for two -- reasons: (a) we can omit the version check in checkOldIface, -- and (b) if the module used TH splices we don't need to force -- recompilation. {- ************************************************************************ * * \subsection{Hpc Support} * * ************************************************************************ -} -- | Information about a modules use of Haskell Program Coverage data HpcInfo = HpcInfo { hpcInfoTickCount :: Int , hpcInfoHash :: Int } | NoHpcInfo { hpcUsed :: AnyHpcUsage -- ^ Is hpc used anywhere on the module \*tree\*? } -- | This is used to signal if one of my imports used HPC instrumentation -- even if there is no module-local HPC usage type AnyHpcUsage = Bool emptyHpcInfo :: AnyHpcUsage -> HpcInfo emptyHpcInfo = NoHpcInfo -- | Find out if HPC is used by this module or any of the modules -- it depends upon isHpcUsed :: HpcInfo -> AnyHpcUsage isHpcUsed (HpcInfo {}) = True isHpcUsed (NoHpcInfo { hpcUsed = used }) = used {- ************************************************************************ * * \subsection{Vectorisation Support} * * ************************************************************************ The following information is generated and consumed by the vectorisation subsystem. It communicates the vectorisation status of declarations from one module to another. Why do we need both f and f_v in the ModGuts/ModDetails/EPS version VectInfo below? We need to know `f' when converting to IfaceVectInfo. However, during vectorisation, we need to know `f_v', whose `Var' we cannot lookup based on just the OccName easily in a Core pass. -} -- |Vectorisation information for 'ModGuts', 'ModDetails' and 'ExternalPackageState'; see also -- documentation at 'Vectorise.Env.GlobalEnv'. -- -- NB: The following tables may also include 'Var's, 'TyCon's and 'DataCon's from imported modules, -- which have been subsequently vectorised in the current module. -- data VectInfo = VectInfo { vectInfoVar :: DVarEnv (Var , Var ) -- ^ @(f, f_v)@ keyed on @f@ , vectInfoTyCon :: NameEnv (TyCon , TyCon) -- ^ @(T, T_v)@ keyed on @T@ , vectInfoDataCon :: NameEnv (DataCon, DataCon) -- ^ @(C, C_v)@ keyed on @C@ , vectInfoParallelVars :: DVarSet -- ^ set of parallel variables , vectInfoParallelTyCons :: NameSet -- ^ set of parallel type constructors } -- |Vectorisation information for 'ModIface'; i.e, the vectorisation information propagated -- across module boundaries. -- -- NB: The field 'ifaceVectInfoVar' explicitly contains the workers of data constructors as well as -- class selectors — i.e., their mappings are /not/ implicitly generated from the data types. -- Moreover, whether the worker of a data constructor is in 'ifaceVectInfoVar' determines -- whether that data constructor was vectorised (or is part of an abstractly vectorised type -- constructor). -- data IfaceVectInfo = IfaceVectInfo { ifaceVectInfoVar :: [Name] -- ^ All variables in here have a vectorised variant , ifaceVectInfoTyCon :: [Name] -- ^ All 'TyCon's in here have a vectorised variant; -- the name of the vectorised variant and those of its -- data constructors are determined by -- 'OccName.mkVectTyConOcc' and -- 'OccName.mkVectDataConOcc'; the names of the -- isomorphisms are determined by 'OccName.mkVectIsoOcc' , ifaceVectInfoTyConReuse :: [Name] -- ^ The vectorised form of all the 'TyCon's in here -- coincides with the unconverted form; the name of the -- isomorphisms is determined by 'OccName.mkVectIsoOcc' , ifaceVectInfoParallelVars :: [Name] -- iface version of 'vectInfoParallelVar' , ifaceVectInfoParallelTyCons :: [Name] -- iface version of 'vectInfoParallelTyCon' } noVectInfo :: VectInfo noVectInfo = VectInfo emptyDVarEnv emptyNameEnv emptyNameEnv emptyDVarSet emptyNameSet plusVectInfo :: VectInfo -> VectInfo -> VectInfo plusVectInfo vi1 vi2 = VectInfo (vectInfoVar vi1 `plusDVarEnv` vectInfoVar vi2) (vectInfoTyCon vi1 `plusNameEnv` vectInfoTyCon vi2) (vectInfoDataCon vi1 `plusNameEnv` vectInfoDataCon vi2) (vectInfoParallelVars vi1 `unionDVarSet` vectInfoParallelVars vi2) (vectInfoParallelTyCons vi1 `unionNameSet` vectInfoParallelTyCons vi2) concatVectInfo :: [VectInfo] -> VectInfo concatVectInfo = foldr plusVectInfo noVectInfo noIfaceVectInfo :: IfaceVectInfo noIfaceVectInfo = IfaceVectInfo [] [] [] [] [] isNoIfaceVectInfo :: IfaceVectInfo -> Bool isNoIfaceVectInfo (IfaceVectInfo l1 l2 l3 l4 l5) = null l1 && null l2 && null l3 && null l4 && null l5 instance Outputable VectInfo where ppr info = vcat [ text "variables :" <+> ppr (vectInfoVar info) , text "tycons :" <+> ppr (vectInfoTyCon info) , text "datacons :" <+> ppr (vectInfoDataCon info) , text "parallel vars :" <+> ppr (vectInfoParallelVars info) , text "parallel tycons :" <+> ppr (vectInfoParallelTyCons info) ] instance Outputable IfaceVectInfo where ppr info = vcat [ text "variables :" <+> ppr (ifaceVectInfoVar info) , text "tycons :" <+> ppr (ifaceVectInfoTyCon info) , text "tycons reuse :" <+> ppr (ifaceVectInfoTyConReuse info) , text "parallel vars :" <+> ppr (ifaceVectInfoParallelVars info) , text "parallel tycons :" <+> ppr (ifaceVectInfoParallelTyCons info) ] instance Binary IfaceVectInfo where put_ bh (IfaceVectInfo a1 a2 a3 a4 a5) = do put_ bh a1 put_ bh a2 put_ bh a3 put_ bh a4 put_ bh a5 get bh = do a1 <- get bh a2 <- get bh a3 <- get bh a4 <- get bh a5 <- get bh return (IfaceVectInfo a1 a2 a3 a4 a5) {- ************************************************************************ * * \subsection{Safe Haskell Support} * * ************************************************************************ This stuff here is related to supporting the Safe Haskell extension, primarily about storing under what trust type a module has been compiled. -} -- | Is an import a safe import? type IsSafeImport = Bool -- | Safe Haskell information for 'ModIface' -- Simply a wrapper around SafeHaskellMode to sepperate iface and flags newtype IfaceTrustInfo = TrustInfo SafeHaskellMode getSafeMode :: IfaceTrustInfo -> SafeHaskellMode getSafeMode (TrustInfo x) = x setSafeMode :: SafeHaskellMode -> IfaceTrustInfo setSafeMode = TrustInfo noIfaceTrustInfo :: IfaceTrustInfo noIfaceTrustInfo = setSafeMode Sf_None trustInfoToNum :: IfaceTrustInfo -> Word8 trustInfoToNum it = case getSafeMode it of Sf_None -> 0 Sf_Unsafe -> 1 Sf_Trustworthy -> 2 Sf_Safe -> 3 numToTrustInfo :: Word8 -> IfaceTrustInfo numToTrustInfo 0 = setSafeMode Sf_None numToTrustInfo 1 = setSafeMode Sf_Unsafe numToTrustInfo 2 = setSafeMode Sf_Trustworthy numToTrustInfo 3 = setSafeMode Sf_Safe numToTrustInfo 4 = setSafeMode Sf_Safe -- retained for backwards compat, used -- to be Sf_SafeInfered but we no longer -- differentiate. numToTrustInfo n = error $ "numToTrustInfo: bad input number! (" ++ show n ++ ")" instance Outputable IfaceTrustInfo where ppr (TrustInfo Sf_None) = text "none" ppr (TrustInfo Sf_Unsafe) = text "unsafe" ppr (TrustInfo Sf_Trustworthy) = text "trustworthy" ppr (TrustInfo Sf_Safe) = text "safe" instance Binary IfaceTrustInfo where put_ bh iftrust = putByte bh $ trustInfoToNum iftrust get bh = getByte bh >>= (return . numToTrustInfo) {- ************************************************************************ * * \subsection{Parser result} * * ************************************************************************ -} data HsParsedModule = HsParsedModule { hpm_module :: Located (HsModule GhcPs), hpm_src_files :: [FilePath], -- ^ extra source files (e.g. from #includes). The lexer collects -- these from '# <file> <line>' pragmas, which the C preprocessor -- leaves behind. These files and their timestamps are stored in -- the .hi file, so that we can force recompilation if any of -- them change (#3589) hpm_annotations :: ApiAnns -- See note [Api annotations] in ApiAnnotation.hs } {- ************************************************************************ * * \subsection{Linkable stuff} * * ************************************************************************ This stuff is in here, rather than (say) in Linker.hs, because the Linker.hs stuff is the *dynamic* linker, and isn't present in a stage-1 compiler -} -- | Information we can use to dynamically link modules into the compiler data Linkable = LM { linkableTime :: UTCTime, -- ^ Time at which this linkable was built -- (i.e. when the bytecodes were produced, -- or the mod date on the files) linkableModule :: Module, -- ^ The linkable module itself linkableUnlinked :: [Unlinked] -- ^ Those files and chunks of code we have yet to link. -- -- INVARIANT: A valid linkable always has at least one 'Unlinked' item. -- If this list is empty, the Linkable represents a fake linkable, which -- is generated in HscNothing mode to avoid recompiling modules. -- -- ToDo: Do items get removed from this list when they get linked? } isObjectLinkable :: Linkable -> Bool isObjectLinkable l = not (null unlinked) && all isObject unlinked where unlinked = linkableUnlinked l -- A linkable with no Unlinked's is treated as a BCO. We can -- generate a linkable with no Unlinked's as a result of -- compiling a module in HscNothing mode, and this choice -- happens to work well with checkStability in module GHC. linkableObjs :: Linkable -> [FilePath] linkableObjs l = [ f | DotO f <- linkableUnlinked l ] instance Outputable Linkable where ppr (LM when_made mod unlinkeds) = (text "LinkableM" <+> parens (text (show when_made)) <+> ppr mod) $$ nest 3 (ppr unlinkeds) ------------------------------------------- -- | Objects which have yet to be linked by the compiler data Unlinked = DotO FilePath -- ^ An object file (.o) | DotA FilePath -- ^ Static archive file (.a) | DotDLL FilePath -- ^ Dynamically linked library file (.so, .dll, .dylib) | BCOs CompiledByteCode [SptEntry] -- ^ A byte-code object, lives only in memory. Also -- carries some static pointer table entries which -- should be loaded along with the BCOs. -- See Note [Grant plan for static forms] in -- StaticPtrTable. instance Outputable Unlinked where ppr (DotO path) = text "DotO" <+> text path ppr (DotA path) = text "DotA" <+> text path ppr (DotDLL path) = text "DotDLL" <+> text path ppr (BCOs bcos spt) = text "BCOs" <+> ppr bcos <+> ppr spt -- | Is this an actual file on disk we can link in somehow? isObject :: Unlinked -> Bool isObject (DotO _) = True isObject (DotA _) = True isObject (DotDLL _) = True isObject _ = False -- | Is this a bytecode linkable with no file on disk? isInterpretable :: Unlinked -> Bool isInterpretable = not . isObject -- | Retrieve the filename of the linkable if possible. Panic if it is a byte-code object nameOfObject :: Unlinked -> FilePath nameOfObject (DotO fn) = fn nameOfObject (DotA fn) = fn nameOfObject (DotDLL fn) = fn nameOfObject other = pprPanic "nameOfObject" (ppr other) -- | Retrieve the compiled byte-code if possible. Panic if it is a file-based linkable byteCodeOfObject :: Unlinked -> CompiledByteCode byteCodeOfObject (BCOs bc _) = bc byteCodeOfObject other = pprPanic "byteCodeOfObject" (ppr other) ------------------------------------------- -- | A list of conlikes which represents a complete pattern match. -- These arise from @COMPLETE@ signatures. -- See Note [Implementation of COMPLETE signatures] data CompleteMatch = CompleteMatch { completeMatchConLikes :: [Name] -- ^ The ConLikes that form a covering family -- (e.g. Nothing, Just) , completeMatchTyCon :: Name -- ^ The TyCon that they cover (e.g. Maybe) } instance Outputable CompleteMatch where ppr (CompleteMatch cl ty) = text "CompleteMatch:" <+> ppr cl <+> dcolon <+> ppr ty -- | A map keyed by the 'completeMatchTyCon'. -- See Note [Implementation of COMPLETE signatures] type CompleteMatchMap = UniqFM [CompleteMatch] mkCompleteMatchMap :: [CompleteMatch] -> CompleteMatchMap mkCompleteMatchMap = extendCompleteMatchMap emptyUFM extendCompleteMatchMap :: CompleteMatchMap -> [CompleteMatch] -> CompleteMatchMap extendCompleteMatchMap = foldl' insertMatch where insertMatch :: CompleteMatchMap -> CompleteMatch -> CompleteMatchMap insertMatch ufm c@(CompleteMatch _ t) = addToUFM_C (++) ufm t [c] {- Note [Implementation of COMPLETE signatures] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A COMPLETE signature represents a set of conlikes (i.e., constructors or pattern synonyms) such that if they are all pattern-matched against in a function, it gives rise to a total function. An example is: newtype Boolean = Boolean Int pattern F, T :: Boolean pattern F = Boolean 0 pattern T = Boolean 1 {-# COMPLETE F, T #-} -- This is a total function booleanToInt :: Boolean -> Int booleanToInt F = 0 booleanToInt T = 1 COMPLETE sets are represented internally in GHC with the CompleteMatch data type. For example, {-# COMPLETE F, T #-} would be represented as: CompleteMatch { complateMatchConLikes = [F, T] , completeMatchTyCon = Boolean } Note that GHC was able to infer the completeMatchTyCon (Boolean), but for the cases in which it's ambiguous, you can also explicitly specify it in the source language by writing this: {-# COMPLETE F, T :: Boolean #-} For efficiency purposes, GHC collects all of the CompleteMatches that it knows about into a CompleteMatchMap, which is a map that is keyed by the completeMatchTyCon. In other words, you could have a multiple COMPLETE sets for the same TyCon: {-# COMPLETE F, T1 :: Boolean #-} {-# COMPLETE F, T2 :: Boolean #-} And looking up the values in the CompleteMatchMap associated with Boolean would give you [CompleteMatch [F, T1] Boolean, CompleteMatch [F, T2] Boolean]. dsGetCompleteMatches in DsMeta accomplishes this lookup. Also see Note [Typechecking Complete Matches] in TcBinds for a more detailed explanation for how GHC ensures that all the conlikes in a COMPLETE set are consistent. -}