Computation openFile file mode allocates and returns a new, open handle to manage the file file. It manages input if mode is ReadMode, output if mode is WriteMode or AppendMode, and both input and output if mode is ReadWriteMode.

If the file does not exist and it is opened for output, it should be created as a new file. If mode is WriteMode and the file already exists, then it should be truncated to zero length. Some operating systems delete empty files, so there is no guarantee that the file will exist following an openFile with mode WriteMode unless it is subsequently written to successfully. The handle is positioned at the end of the file if mode is AppendMode, and otherwise at the beginning (in which case its internal position is 0). The initial buffer mode is implementation-dependent.

This operation may fail with:

• isAlreadyInUseError if the file is already open and cannot be reopened;
• isDoesNotExistError if the file does not exist; or
• isPermissionError if the user does not have permission to open the file.

Note: if you will be working with files containing binary data, you'll want to be using openBinaryFile.

The computation appendFile file str function appends the string str, to the file file.

Note that writeFile and appendFile write a literal string to a file. To write a value of any printable type, as with print, use the show function to convert the value to a string first.

 main = appendFile "squares" (show [(x,x*x) | x <- [0,0.1..2]])

Implementations should enforce as far as possible, at least locally to the Haskell process, multiple-reader single-writer locking on files. That is, /there may either be many handles on the same file which manage input, or just one handle on the file which manages output/. If any open or semi-closed handle is managing a file for output, no new handle can be allocated for that file. If any open or semi-closed handle is managing a file for input, new handles can only be allocated if they do not manage output. Whether two files are the same is implementation-dependent, but they should normally be the same if they have the same absolute path name and neither has been renamed, for example.

Warning: the readFile operation holds a semi-closed handle on the file until the entire contents of the file have been consumed. It follows that an attempt to write to a file (using writeFile, for example) that was earlier opened by readFile will usually result in failure with System.IO.Error.isAlreadyInUseError.

For a readable handle hdl, hIsEOF hdl returns True if no further input can be taken from hdl or for a physical file, if the current I/O position is equal to the length of the file. Otherwise, it returns False.

NOTE: hIsEOF may block, because it has to attempt to read from the stream to determine whether there is any more data to be read.

Computation hSetBuffering hdl mode sets the mode of buffering for handle hdl on subsequent reads and writes.

If the buffer mode is changed from BlockBuffering or LineBuffering to NoBuffering, then

• if hdl is writable, the buffer is flushed as for hFlush;
• if hdl is not writable, the contents of the buffer is discarded.

This operation may fail with:

• isPermissionError if the handle has already been used for reading or writing and the implementation does not allow the buffering mode to be changed.

The action hFlush hdl causes any items buffered for output in handle hdl to be sent immediately to the operating system.

This operation may fail with:

• isFullError if the device is full;
• isPermissionError if a system resource limit would be exceeded. It is unspecified whether the characters in the buffer are discarded or retained under these circumstances.

If a call to hGetPosn hdl returns a position p, then computation hSetPosn p sets the position of hdl to the position it held at the time of the call to hGetPosn.

This operation may fail with:

• isPermissionError if a system resource limit would be exceeded.

Computation hSeek hdl mode i sets the position of handle hdl depending on mode. The offset i is given in terms of 8-bit bytes.

If hdl is block- or line-buffered, then seeking to a position which is not in the current buffer will first cause any items in the output buffer to be written to the device, and then cause the input buffer to be discarded. Some handles may not be seekable (see hIsSeekable), or only support a subset of the possible positioning operations (for instance, it may only be possible to seek to the end of a tape, or to a positive offset from the beginning or current position). It is not possible to set a negative I/O position, or for a physical file, an I/O position beyond the current end-of-file.

This operation may fail with:

• isPermissionError if a system resource limit would be exceeded.

Computation hWaitForInput hdl t waits until input is available on handle hdl. It returns True as soon as input is available on hdl, or False if no input is available within t milliseconds.

If t is less than zero, then hWaitForInput waits indefinitely.

This operation may fail with:

• isEOFError if the end of file has been reached.

NOTE for GHC users: unless you use the -threaded flag, hWaitForInput t where t >= 0 will block all other Haskell threads for the duration of the call. It behaves like a safe foreign call in this respect.

Computation hReady hdl indicates whether at least one item is available for input from handle hdl.

This operation may fail with:

• System.IO.Error.isEOFError if the end of file has been reached.

Computation hGetChar hdl reads a character from the file or channel managed by hdl, blocking until a character is available.

This operation may fail with:

• isEOFError if the end of file has been reached.

Computation hGetLine hdl reads a line from the file or channel managed by hdl.

This operation may fail with:

• isEOFError if the end of file is encountered when reading the first character of the line.

If hGetLine encounters end-of-file at any other point while reading in a line, it is treated as a line terminator and the (partial) line is returned.

Computation hLookAhead returns the next character from the handle without removing it from the input buffer, blocking until a character is available.

This operation may fail with:

• isEOFError if the end of file has been reached.

Computation hGetContents hdl returns the list of characters corresponding to the unread portion of the channel or file managed by hdl, which is put into an intermediate state, semi-closed. In this state, hdl is effectively closed, but items are read from hdl on demand and accumulated in a special list returned by hGetContents hdl.

Any operation that fails because a handle is closed, also fails if a handle is semi-closed. The only exception is hClose. A semi-closed handle becomes closed:

• if hClose is applied to it;
• if an I/O error occurs when reading an item from the handle;
• or once the entire contents of the handle has been read.

Once a semi-closed handle becomes closed, the contents of the associated list becomes fixed. The contents of this final list is only partially specified: it will contain at least all the items of the stream that were evaluated prior to the handle becoming closed.

Any I/O errors encountered while a handle is semi-closed are simply discarded.

This operation may fail with:

• isEOFError if the end of file has been reached.

Computation hPutChar hdl ch writes the character ch to the file or channel managed by hdl. Characters may be buffered if buffering is enabled for hdl.

This operation may fail with:

• isFullError if the device is full; or
• isPermissionError if another system resource limit would be exceeded.

Computation hPutStr hdl s writes the string s to the file or channel managed by hdl.

This operation may fail with:

• isFullError if the device is full; or
• isPermissionError if another system resource limit would be exceeded.

Computation hPrint hdl t writes the string representation of t given by the shows function to the file or channel managed by hdl and appends a newline.

This operation may fail with:

• System.IO.Error.isFullError if the device is full; or
• System.IO.Error.isPermissionError if another system resource limit would be exceeded.

The print function outputs a value of any printable type to the standard output device. Printable types are those that are instances of class Show; print converts values to strings for output using the show operation and adds a newline.

For example, a program to print the first 20 integers and their powers of 2 could be written as:

 main = print ([(n, 2^n) | n <- [0..19]])

Select binary mode (True) or text mode (False) on a open handle. (See also openBinaryFile.)

This has the same effect as calling hSetEncoding with latin1, together with hSetNewlineMode with noNewlineTranslation.

hPutBuf hdl buf count writes count 8-bit bytes from the buffer buf to the handle hdl. It returns ().

hPutBuf ignores any text encoding that applies to the Handle, writing the bytes directly to the underlying file or device.

hPutBuf ignores the prevailing TextEncoding and NewlineMode on the Handle, and writes bytes directly.

This operation may fail with:

• ResourceVanished if the handle is a pipe or socket, and the reading end is closed. (If this is a POSIX system, and the program has not asked to ignore SIGPIPE, then a SIGPIPE may be delivered instead, whose default action is to terminate the program).

hGetBuf hdl buf count reads data from the handle hdl into the buffer buf until either EOF is reached or count 8-bit bytes have been read. It returns the number of bytes actually read. This may be zero if EOF was reached before any data was read (or if count is zero).

hGetBuf ignores whatever TextEncoding the Handle is currently using, and reads bytes directly from the underlying IO device.

hGetBuf never raises an EOF exception, instead it returns a value smaller than count.

If the handle is a pipe or socket, and the writing end is closed, hGetBuf will behave as if EOF was reached.

hGetBuf ignores the prevailing TextEncoding and NewlineMode on the Handle, and reads bytes directly.

hGetBufNonBlocking hdl buf count reads data from the handle hdl into the buffer buf until either EOF is reached, or count 8-bit bytes have been read, or there is no more data available to read immediately.

hGetBufNonBlocking is identical to hGetBuf, except that it will never block waiting for data to become available, instead it returns only whatever data is available. To wait for data to arrive before calling hGetBufNonBlocking, use hWaitForInput.

hGetBufNonBlocking ignores whatever TextEncoding the Handle is currently using, and reads bytes directly from the underlying IO device.

If the handle is a pipe or socket, and the writing end is closed, hGetBufNonBlocking will behave as if EOF was reached.

hGetBufNonBlocking ignores the prevailing TextEncoding and NewlineMode on the Handle, and reads bytes directly.

A text-mode Handle has an associated TextEncoding, which is used to decode bytes into Unicode characters when reading, and encode Unicode characters into bytes when writing.

The default TextEncoding is the same as the default encoding on your system, which is also available as localeEncoding. (GHC note: on Windows, we currently do not support double-byte encodings; if the console's code page is unsupported, then localeEncoding will be latin1.)

Encoding and decoding errors are always detected and reported, except during lazy I/O (hGetContents, getContents, and readFile), where a decoding error merely results in termination of the character stream, as with other I/O errors.

The action hSetEncoding hdl encoding changes the text encoding for the handle hdl to encoding. The default encoding when a Handle is created is localeEncoding, namely the default encoding for the current locale.

To create a Handle with no encoding at all, use openBinaryFile. To stop further encoding or decoding on an existing Handle, use hSetBinaryMode.

hSetEncoding may need to flush buffered data in order to change the encoding.

Return the current TextEncoding for the specified Handle, or Nothing if the Handle is in binary mode.

Note that the TextEncoding remembers nothing about the state of the encoder/decoder in use on this Handle. For example, if the encoding in use is UTF-16, then using hGetEncoding and hSetEncoding to save and restore the encoding may result in an extra byte-order-mark being written to the file.

The UTF-8 Unicode encoding, with a byte-order-mark (BOM; the byte sequence 0xEF 0xBB 0xBF). This encoding behaves like utf8, except that on input, the BOM sequence is ignored at the beginning of the stream, and on output, the BOM sequence is prepended.

The byte-order-mark is strictly unnecessary in UTF-8, but is sometimes used to identify the encoding of a file.

Look up the named Unicode encoding. May fail with

• isDoesNotExistError if the encoding is unknown

The set of known encodings is system-dependent, but includes at least:

• UTF-8

• UTF-16, UTF-16BE, UTF-16LE
• UTF-32, UTF-32BE, UTF-32LE

On systems using GNU iconv (e.g. Linux), there is additional notation for specifying how illegal characters are handled:

• a suffix of //IGNORE, e.g. UTF-8//IGNORE, will cause all illegal sequences on input to be ignored, and on output will drop all code points that have no representation in the target encoding.
• a suffix of //TRANSLIT will choose a replacement character for illegal sequences or code points.

On Windows, you can access supported code pages with the prefix CP; for example, "CP1250".

In Haskell, a newline is always represented by the character '\n'. However, in files and external character streams, a newline may be represented by another character sequence, such as '\r\n'.

A text-mode Handle has an associated NewlineMode that specifies how to transate newline characters. The NewlineMode specifies the input and output translation separately, so that for instance you can translate '\r\n' to '\n' on input, but leave newlines as '\n' on output.

The default NewlineMode for a Handle is nativeNewlineMode, which does no translation on Unix systems, but translates '\r\n' to '\n' and back on Windows.

Binary-mode Handles do no newline translation at all.

Do no newline translation at all.

 noNewlineTranslation  = NewlineMode { inputNL  = LF, outputNL = LF }

Map '\r\n' into '\n' on input, and '\n' to the native newline represetnation on output. This mode can be used on any platform, and works with text files using any newline convention. The downside is that readFile >>= writeFile might yield a different file.

 universalNewlineMode  = NewlineMode { inputNL  = CRLF, 
                                       outputNL = nativeNewline }

Use the native newline representation on both input and output

 nativeNewlineMode  = NewlineMode { inputNL  = nativeNewline
                                    outputNL = nativeNewline }