7.4. Type system extensions

7.4.1. Data types and type synonyms

7.4.1.1. Data types with no constructors

With the -fglasgow-exts flag, GHC lets you declare a data type with no constructors. For example:

  data S      -- S :: *
  data T a    -- T :: * -> *

Syntactically, the declaration lacks the "= constrs" part. The type can be parameterised over types of any kind, but if the kind is not * then an explicit kind annotation must be used (see Section 7.4.8, “Explicitly-kinded quantification”).

Such data types have only one value, namely bottom. Nevertheless, they can be useful when defining "phantom types".

7.4.1.2. Infix type constructors, classes, and type variables

GHC allows type constructors, classes, and type variables to be operators, and to be written infix, very much like expressions. More specifically:

  • A type constructor or class can be an operator, beginning with a colon; e.g. :*:. The lexical syntax is the same as that for data constructors.

  • Data type and type-synonym declarations can be written infix, parenthesised if you want further arguments. E.g.

      data a :*: b = Foo a b
      type a :+: b = Either a b
      class a :=: b where ...
    
      data (a :**: b) x = Baz a b x
      type (a :++: b) y = Either (a,b) y
    

  • Types, and class constraints, can be written infix. For example

    	x :: Int :*: Bool
            f :: (a :=: b) => a -> b
      

  • A type variable can be an (unqualified) operator e.g. +. The lexical syntax is the same as that for variable operators, excluding "(.)", "(!)", and "(*)". In a binding position, the operator must be parenthesised. For example:

       type T (+) = Int + Int
       f :: T Either
       f = Left 3
     
       liftA2 :: Arrow (~>)
    	  => (a -> b -> c) -> (e ~> a) -> (e ~> b) -> (e ~> c)
       liftA2 = ...
    

  • Back-quotes work as for expressions, both for type constructors and type variables; e.g. Int `Either` Bool, or Int `a` Bool. Similarly, parentheses work the same; e.g. (:*:) Int Bool.

  • Fixities may be declared for type constructors, or classes, just as for data constructors. However, one cannot distinguish between the two in a fixity declaration; a fixity declaration sets the fixity for a data constructor and the corresponding type constructor. For example:

      infixl 7 T, :*:
    

    sets the fixity for both type constructor T and data constructor T, and similarly for :*:. Int `a` Bool.

  • Function arrow is infixr with fixity 0. (This might change; I'm not sure what it should be.)

7.4.1.3. Liberalised type synonyms

Type synonyms are like macros at the type level, and GHC does validity checking on types only after expanding type synonyms. That means that GHC can be very much more liberal about type synonyms than Haskell 98:

  • You can write a forall (including overloading) in a type synonym, thus:

      type Discard a = forall b. Show b => a -> b -> (a, String)
    
      f :: Discard a
      f x y = (x, show y)
    
      g :: Discard Int -> (Int,Bool)    -- A rank-2 type
      g f = f Int True
    

  • You can write an unboxed tuple in a type synonym:

      type Pr = (# Int, Int #)
    
      h :: Int -> Pr
      h x = (# x, x #)
    

  • You can apply a type synonym to a forall type:

      type Foo a = a -> a -> Bool
     
      f :: Foo (forall b. b->b)
    

    After expanding the synonym, f has the legal (in GHC) type:

      f :: (forall b. b->b) -> (forall b. b->b) -> Bool
    

  • You can apply a type synonym to a partially applied type synonym:

      type Generic i o = forall x. i x -> o x
      type Id x = x
      
      foo :: Generic Id []
    

    After expanding the synonym, foo has the legal (in GHC) type:

      foo :: forall x. x -> [x]
    

GHC currently does kind checking before expanding synonyms (though even that could be changed.)

After expanding type synonyms, GHC does validity checking on types, looking for the following mal-formedness which isn't detected simply by kind checking:

  • Type constructor applied to a type involving for-alls.

  • Unboxed tuple on left of an arrow.

  • Partially-applied type synonym.

So, for example, this will be rejected:

  type Pr = (# Int, Int #)

  h :: Pr -> Int
  h x = ...

because GHC does not allow unboxed tuples on the left of a function arrow.

7.4.1.4. Existentially quantified data constructors

The idea of using existential quantification in data type declarations was suggested by Perry, and implemented in Hope+ (Nigel Perry, The Implementation of Practical Functional Programming Languages, PhD Thesis, University of London, 1991). It was later formalised by Laufer and Odersky (Polymorphic type inference and abstract data types, TOPLAS, 16(5), pp1411-1430, 1994). It's been in Lennart Augustsson's hbc Haskell compiler for several years, and proved very useful. Here's the idea. Consider the declaration:

  data Foo = forall a. MkFoo a (a -> Bool)
           | Nil

The data type Foo has two constructors with types:

  MkFoo :: forall a. a -> (a -> Bool) -> Foo
  Nil   :: Foo

Notice that the type variable a in the type of MkFoo does not appear in the data type itself, which is plain Foo. For example, the following expression is fine:

  [MkFoo 3 even, MkFoo 'c' isUpper] :: [Foo]

Here, (MkFoo 3 even) packages an integer with a function even that maps an integer to Bool; and MkFoo 'c' isUpper packages a character with a compatible function. These two things are each of type Foo and can be put in a list.

What can we do with a value of type Foo?. In particular, what happens when we pattern-match on MkFoo?

  f (MkFoo val fn) = ???

Since all we know about val and fn is that they are compatible, the only (useful) thing we can do with them is to apply fn to val to get a boolean. For example:

  f :: Foo -> Bool
  f (MkFoo val fn) = fn val

What this allows us to do is to package heterogenous values together with a bunch of functions that manipulate them, and then treat that collection of packages in a uniform manner. You can express quite a bit of object-oriented-like programming this way.

7.4.1.4.1. Why existential?

What has this to do with existential quantification? Simply that MkFoo has the (nearly) isomorphic type

  MkFoo :: (exists a . (a, a -> Bool)) -> Foo

But Haskell programmers can safely think of the ordinary universally quantified type given above, thereby avoiding adding a new existential quantification construct.

7.4.1.4.2. Type classes

An easy extension (implemented in hbc) is to allow arbitrary contexts before the constructor. For example:

data Baz = forall a. Eq a => Baz1 a a
         | forall b. Show b => Baz2 b (b -> b)

The two constructors have the types you'd expect:

Baz1 :: forall a. Eq a => a -> a -> Baz
Baz2 :: forall b. Show b => b -> (b -> b) -> Baz

But when pattern matching on Baz1 the matched values can be compared for equality, and when pattern matching on Baz2 the first matched value can be converted to a string (as well as applying the function to it). So this program is legal:

  f :: Baz -> String
  f (Baz1 p q) | p == q    = "Yes"
               | otherwise = "No"
  f (Baz2 v fn)            = show (fn v)

Operationally, in a dictionary-passing implementation, the constructors Baz1 and Baz2 must store the dictionaries for Eq and Show respectively, and extract it on pattern matching.

Notice the way that the syntax fits smoothly with that used for universal quantification earlier.

7.4.1.4.3. Restrictions

There are several restrictions on the ways in which existentially-quantified constructors can be use.

  • When pattern matching, each pattern match introduces a new, distinct, type for each existential type variable. These types cannot be unified with any other type, nor can they escape from the scope of the pattern match. For example, these fragments are incorrect:

    f1 (MkFoo a f) = a
    

    Here, the type bound by MkFoo "escapes", because a is the result of f1. One way to see why this is wrong is to ask what type f1 has:

      f1 :: Foo -> a             -- Weird!
    

    What is this "a" in the result type? Clearly we don't mean this:

      f1 :: forall a. Foo -> a   -- Wrong!
    

    The original program is just plain wrong. Here's another sort of error

      f2 (Baz1 a b) (Baz1 p q) = a==q
    

    It's ok to say a==b or p==q, but a==q is wrong because it equates the two distinct types arising from the two Baz1 constructors.

  • You can't pattern-match on an existentially quantified constructor in a let or where group of bindings. So this is illegal:

      f3 x = a==b where { Baz1 a b = x }
    

    Instead, use a case expression:

      f3 x = case x of Baz1 a b -> a==b
    

    In general, you can only pattern-match on an existentially-quantified constructor in a case expression or in the patterns of a function definition. The reason for this restriction is really an implementation one. Type-checking binding groups is already a nightmare without existentials complicating the picture. Also an existential pattern binding at the top level of a module doesn't make sense, because it's not clear how to prevent the existentially-quantified type "escaping". So for now, there's a simple-to-state restriction. We'll see how annoying it is.

  • You can't use existential quantification for newtype declarations. So this is illegal:

      newtype T = forall a. Ord a => MkT a
    

    Reason: a value of type T must be represented as a pair of a dictionary for Ord t and a value of type t. That contradicts the idea that newtype should have no concrete representation. You can get just the same efficiency and effect by using data instead of newtype. If there is no overloading involved, then there is more of a case for allowing an existentially-quantified newtype, because the data version does carry an implementation cost, but single-field existentially quantified constructors aren't much use. So the simple restriction (no existential stuff on newtype) stands, unless there are convincing reasons to change it.

  • You can't use deriving to define instances of a data type with existentially quantified data constructors. Reason: in most cases it would not make sense. For example:#

    data T = forall a. MkT [a] deriving( Eq )
    

    To derive Eq in the standard way we would need to have equality between the single component of two MkT constructors:

    instance Eq T where
      (MkT a) == (MkT b) = ???
    

    But a and b have distinct types, and so can't be compared. It's just about possible to imagine examples in which the derived instance would make sense, but it seems altogether simpler simply to prohibit such declarations. Define your own instances!

7.4.2. Class declarations

This section documents GHC's implementation of multi-parameter type classes. There's lots of background in the paper Type classes: exploring the design space (Simon Peyton Jones, Mark Jones, Erik Meijer).

There are the following constraints on class declarations:

  1. Multi-parameter type classes are permitted. For example:

      class Collection c a where
        union :: c a -> c a -> c a
        ...etc.
    

  2. The class hierarchy must be acyclic. However, the definition of "acyclic" involves only the superclass relationships. For example, this is OK:

      class C a where {
        op :: D b => a -> b -> b
      }
    
      class C a => D a where { ... }
    

    Here, C is a superclass of D, but it's OK for a class operation op of C to mention D. (It would not be OK for D to be a superclass of C.)

  3. There are no restrictions on the context in a class declaration (which introduces superclasses), except that the class hierarchy must be acyclic. So these class declarations are OK:

      class Functor (m k) => FiniteMap m k where
        ...
    
      class (Monad m, Monad (t m)) => Transform t m where
        lift :: m a -> (t m) a
    

  4. All of the class type variables must be reachable (in the sense mentioned in Section 7.4.3, “Type signatures”) from the free variables of each method type . For example:

      class Coll s a where
        empty  :: s
        insert :: s -> a -> s
    

    is not OK, because the type of empty doesn't mention a. This rule is a consequence of Rule 1(a), above, for types, and has the same motivation. Sometimes, offending class declarations exhibit misunderstandings. For example, Coll might be rewritten

      class Coll s a where
        empty  :: s a
        insert :: s a -> a -> s a
    

    which makes the connection between the type of a collection of a's (namely (s a)) and the element type a. Occasionally this really doesn't work, in which case you can split the class like this:

      class CollE s where
        empty  :: s
    
      class CollE s => Coll s a where
        insert :: s -> a -> s
    

7.4.2.1. Class method types

Haskell 98 prohibits class method types to mention constraints on the class type variable, thus:

  class Seq s a where
    fromList :: [a] -> s a
    elem     :: Eq a => a -> s a -> Bool

The type of elem is illegal in Haskell 98, because it contains the constraint Eq a, constrains only the class type variable (in this case a).

With the -fglasgow-exts GHC lifts this restriction.

7.4.3. Type signatures

7.4.3.1. The context of a type signature

Unlike Haskell 98, constraints in types do not have to be of the form (class type-variable) or (class (type-variable type-variable ...)). Thus, these type signatures are perfectly OK

  g :: Eq [a] => ...
  g :: Ord (T a ()) => ...

GHC imposes the following restrictions on the constraints in a type signature. Consider the type:

  forall tv1..tvn (c1, ...,cn) => type

(Here, we write the "foralls" explicitly, although the Haskell source language omits them; in Haskell 98, all the free type variables of an explicit source-language type signature are universally quantified, except for the class type variables in a class declaration. However, in GHC, you can give the foralls if you want. See Section 7.4.9, “Arbitrary-rank polymorphism ”).

  1. Each universally quantified type variable tvi must be reachable from type. A type variable a is "reachable" if it it appears in the same constraint as either a type variable free in in type, or another reachable type variable. A value with a type that does not obey this reachability restriction cannot be used without introducing ambiguity; that is why the type is rejected. Here, for example, is an illegal type:

      forall a. Eq a => Int
    

    When a value with this type was used, the constraint Eq tv would be introduced where tv is a fresh type variable, and (in the dictionary-translation implementation) the value would be applied to a dictionary for Eq tv. The difficulty is that we can never know which instance of Eq to use because we never get any more information about tv.

    Note that the reachability condition is weaker than saying that a is functionally dependent on a type variable free in type (see Section 7.4.7, “Functional dependencies ”). The reason for this is there might be a "hidden" dependency, in a superclass perhaps. So "reachable" is a conservative approximation to "functionally dependent". For example, consider:

      class C a b | a -> b where ...
      class C a b => D a b where ...
      f :: forall a b. D a b => a -> a
    

    This is fine, because in fact a does functionally determine b but that is not immediately apparent from f's type.

  2. Every constraint ci must mention at least one of the universally quantified type variables tvi. For example, this type is OK because C a b mentions the universally quantified type variable b:

      forall a. C a b => burble
    

    The next type is illegal because the constraint Eq b does not mention a:

      forall a. Eq b => burble
    

    The reason for this restriction is milder than the other one. The excluded types are never useful or necessary (because the offending context doesn't need to be witnessed at this point; it can be floated out). Furthermore, floating them out increases sharing. Lastly, excluding them is a conservative choice; it leaves a patch of territory free in case we need it later.

7.4.3.2. For-all hoisting

It is often convenient to use generalised type synonyms (see Section 7.4.1.3, “Liberalised type synonyms”) at the right hand end of an arrow, thus:

  type Discard a = forall b. a -> b -> a

  g :: Int -> Discard Int
  g x y z = x+y

Simply expanding the type synonym would give

  g :: Int -> (forall b. Int -> b -> Int)

but GHC "hoists" the forall to give the isomorphic type

  g :: forall b. Int -> Int -> b -> Int

In general, the rule is this: to determine the type specified by any explicit user-written type (e.g. in a type signature), GHC expands type synonyms and then repeatedly performs the transformation:

  type1 -> forall a1..an. context2 => type2
==>
  forall a1..an. context2 => type1 -> type2

(In fact, GHC tries to retain as much synonym information as possible for use in error messages, but that is a usability issue.) This rule applies, of course, whether or not the forall comes from a synonym. For example, here is another valid way to write g's type signature:

  g :: Int -> Int -> forall b. b -> Int

When doing this hoisting operation, GHC eliminates duplicate constraints. For example:

  type Foo a = (?x::Int) => Bool -> a
  g :: Foo (Foo Int)

means

  g :: (?x::Int) => Bool -> Bool -> Int

7.4.4. Instance declarations

7.4.4.1. Overlapping instances

In general, GHC requires that that it be unambiguous which instance declaration should be used to resolve a type-class constraint. This behaviour can be modified by two flags: -fallow-overlapping-instances and -fallow-incoherent-instances , as this section discusses.

When GHC tries to resolve, say, the constraint C Int Bool, it tries to match every instance declaration against the constraint, by instantiating the head of the instance declaration. For example, consider these declarations:

  instance context1 => C Int a     where ...  -- (A)
  instance context2 => C a   Bool  where ...  -- (B)
  instance context3 => C Int [a]   where ...  -- (C)
  instance context4 => C Int [Int] where ...  -- (D)

The instances (A) and (B) match the constraint C Int Bool, but (C) and (D) do not. When matching, GHC takes no account of the context of the instance declaration (context1 etc). GHC's default behaviour is that exactly one instance must match the constraint it is trying to resolve. It is fine for there to be a potential of overlap (by including both declarations (A) and (B), say); an error is only reported if a particular constraint matches more than one.

The -fallow-overlapping-instances flag instructs GHC to allow more than one instance to match, provided there is a most specific one. For example, the constraint C Int [Int] matches instances (A), (C) and (D), but the last is more specific, and hence is chosen. If there is no most-specific match, the program is rejected.

However, GHC is conservative about committing to an overlapping instance. For example:

  f :: [b] -> [b]
  f x = ...

Suppose that from the RHS of f we get the constraint C Int [b]. But GHC does not commit to instance (C), because in a particular call of f, b might be instantiate to Int, in which case instance (D) would be more specific still. So GHC rejects the program. If you add the flag -fallow-incoherent-instances, GHC will instead pick (C), without complaining about the problem of subsequent instantiations.

Because overlaps are checked and reported lazily, as described above, you need the -fallow-overlapping-instances in the module that calls the overloaded function, rather than in the module that defines it.

7.4.4.2. Type synonyms in the instance head

Unlike Haskell 98, instance heads may use type synonyms. (The instance "head" is the bit after the "=>" in an instance decl.) As always, using a type synonym is just shorthand for writing the RHS of the type synonym definition. For example:

  type Point = (Int,Int)
  instance C Point   where ...
  instance C [Point] where ...

is legal. However, if you added

  instance C (Int,Int) where ...

as well, then the compiler will complain about the overlapping (actually, identical) instance declarations. As always, type synonyms must be fully applied. You cannot, for example, write:

  type P a = [[a]]
  instance Monad P where ...

This design decision is independent of all the others, and easily reversed, but it makes sense to me.

7.4.4.3. Undecidable instances

An instance declaration must normally obey the following rules:

  1. At least one of the types in the head of an instance declaration must not be a type variable. For example, these are OK:

      instance C Int a where ...
    
      instance D (Int, Int) where ...
    
      instance E [[a]] where ...
    

    but this is not:

      instance F a where ...
    

    Note that instance heads may contain repeated type variables. For example, this is OK:

      instance Stateful (ST s) (MutVar s) where ...
    

  2. All of the types in the context of an instance declaration must be type variables. Thus

    instance C a b => Eq (a,b) where ...
    

    is OK, but

    instance C Int b => Foo b where ...
    

    is not OK.

These restrictions ensure that context reduction terminates: each reduction step removes one type constructor. For example, the following would make the type checker loop if it wasn't excluded:

  instance C a => C a where ...

There are two situations in which the rule is a bit of a pain. First, if one allows overlapping instance declarations then it's quite convenient to have a "default instance" declaration that applies if something more specific does not:

  instance C a where
    op = ... -- Default

Second, sometimes you might want to use the following to get the effect of a "class synonym":

  class (C1 a, C2 a, C3 a) => C a where { }

  instance (C1 a, C2 a, C3 a) => C a where { }

This allows you to write shorter signatures:

  f :: C a => ...

instead of

  f :: (C1 a, C2 a, C3 a) => ...

Voluminous correspondence on the Haskell mailing list has convinced me that it's worth experimenting with more liberal rules. If you use the experimental flag -fallow-undecidable-instances , you can use arbitrary types in both an instance context and instance head. Termination is ensured by having a fixed-depth recursion stack. If you exceed the stack depth you get a sort of backtrace, and the opportunity to increase the stack depth with -fcontext-stackN.

I'm on the lookout for a less brutal solution: a simple rule that preserves decidability while allowing these idioms interesting idioms.

7.4.5. Implicit parameters

Implicit parameters are implemented as described in "Implicit parameters: dynamic scoping with static types", J Lewis, MB Shields, E Meijer, J Launchbury, 27th ACM Symposium on Principles of Programming Languages (POPL'00), Boston, Jan 2000.

(Most of the following, stil rather incomplete, documentation is due to Jeff Lewis.)

Implicit parameter support is enabled with the option -fimplicit-params.

A variable is called dynamically bound when it is bound by the calling context of a function and statically bound when bound by the callee's context. In Haskell, all variables are statically bound. Dynamic binding of variables is a notion that goes back to Lisp, but was later discarded in more modern incarnations, such as Scheme. Dynamic binding can be very confusing in an untyped language, and unfortunately, typed languages, in particular Hindley-Milner typed languages like Haskell, only support static scoping of variables.

However, by a simple extension to the type class system of Haskell, we can support dynamic binding. Basically, we express the use of a dynamically bound variable as a constraint on the type. These constraints lead to types of the form (?x::t') => t, which says "this function uses a dynamically-bound variable ?x of type t'". For example, the following expresses the type of a sort function, implicitly parameterized by a comparison function named cmp.

  sort :: (?cmp :: a -> a -> Bool) => [a] -> [a]

The dynamic binding constraints are just a new form of predicate in the type class system.

An implicit parameter occurs in an expression using the special form ?x, where x is any valid identifier (e.g. ord ?x is a valid expression). Use of this construct also introduces a new dynamic-binding constraint in the type of the expression. For example, the following definition shows how we can define an implicitly parameterized sort function in terms of an explicitly parameterized sortBy function:

  sortBy :: (a -> a -> Bool) -> [a] -> [a]

  sort   :: (?cmp :: a -> a -> Bool) => [a] -> [a]
  sort    = sortBy ?cmp

7.4.5.1. Implicit-parameter type constraints

Dynamic binding constraints behave just like other type class constraints in that they are automatically propagated. Thus, when a function is used, its implicit parameters are inherited by the function that called it. For example, our sort function might be used to pick out the least value in a list:

  least   :: (?cmp :: a -> a -> Bool) => [a] -> a
  least xs = fst (sort xs)

Without lifting a finger, the ?cmp parameter is propagated to become a parameter of least as well. With explicit parameters, the default is that parameters must always be explicit propagated. With implicit parameters, the default is to always propagate them.

An implicit-parameter type constraint differs from other type class constraints in the following way: All uses of a particular implicit parameter must have the same type. This means that the type of (?x, ?x) is (?x::a) => (a,a), and not (?x::a, ?x::b) => (a, b), as would be the case for type class constraints.

You can't have an implicit parameter in the context of a class or instance declaration. For example, both these declarations are illegal:

  class (?x::Int) => C a where ...
  instance (?x::a) => Foo [a] where ...

Reason: exactly which implicit parameter you pick up depends on exactly where you invoke a function. But the ``invocation'' of instance declarations is done behind the scenes by the compiler, so it's hard to figure out exactly where it is done. Easiest thing is to outlaw the offending types.

Implicit-parameter constraints do not cause ambiguity. For example, consider:

   f :: (?x :: [a]) => Int -> Int
   f n = n + length ?x

   g :: (Read a, Show a) => String -> String
   g s = show (read s)

Here, g has an ambiguous type, and is rejected, but f is fine. The binding for ?x at f's call site is quite unambiguous, and fixes the type a.

7.4.5.2. Implicit-parameter bindings

An implicit parameter is bound using the standard let or where binding forms. For example, we define the min function by binding cmp.

  min :: [a] -> a
  min  = let ?cmp = (<=) in least

A group of implicit-parameter bindings may occur anywhere a normal group of Haskell bindings can occur, except at top level. That is, they can occur in a let (including in a list comprehension, or do-notation, or pattern guards), or a where clause. Note the following points:

  • An implicit-parameter binding group must be a collection of simple bindings to implicit-style variables (no function-style bindings, and no type signatures); these bindings are neither polymorphic or recursive.

  • You may not mix implicit-parameter bindings with ordinary bindings in a single let expression; use two nested lets instead. (In the case of where you are stuck, since you can't nest where clauses.)

  • You may put multiple implicit-parameter bindings in a single binding group; but they are not treated as a mutually recursive group (as ordinary let bindings are). Instead they are treated as a non-recursive group, simultaneously binding all the implicit parameter. The bindings are not nested, and may be re-ordered without changing the meaning of the program. For example, consider:

      f t = let { ?x = t; ?y = ?x+(1::Int) } in ?x + ?y
    

    The use of ?x in the binding for ?y does not "see" the binding for ?x, so the type of f is

      f :: (?x::Int) => Int -> Int
    

7.4.5.3. Implicit parameters and polymorphic recursion

Consider these two definitions:

  len1 :: [a] -> Int
  len1 xs = let ?acc = 0 in len_acc1 xs

  len_acc1 [] = ?acc
  len_acc1 (x:xs) = let ?acc = ?acc + (1::Int) in len_acc1 xs

  ------------

  len2 :: [a] -> Int
  len2 xs = let ?acc = 0 in len_acc2 xs

  len_acc2 :: (?acc :: Int) => [a] -> Int
  len_acc2 [] = ?acc
  len_acc2 (x:xs) = let ?acc = ?acc + (1::Int) in len_acc2 xs

The only difference between the two groups is that in the second group len_acc is given a type signature. In the former case, len_acc1 is monomorphic in its own right-hand side, so the implicit parameter ?acc is not passed to the recursive call. In the latter case, because len_acc2 has a type signature, the recursive call is made to the polymoprhic version, which takes ?acc as an implicit parameter. So we get the following results in GHCi:

  Prog> len1 "hello"
  0
  Prog> len2 "hello"
  5

Adding a type signature dramatically changes the result! This is a rather counter-intuitive phenomenon, worth watching out for.

7.4.5.4. Implicit parameters and monomorphism

GHC applies the dreaded Monomorphism Restriction (section 4.5.5 of the Haskell Report) to implicit parameters. For example, consider:

 f :: Int -> Int
  f v = let ?x = 0     in
        let y = ?x + v in
        let ?x = 5     in
        y

Since the binding for y falls under the Monomorphism Restriction it is not generalised, so the type of y is simply Int, not (?x::Int) => Int. Hence, (f 9) returns result 9. If you add a type signature for y, then y will get type (?x::Int) => Int, so the occurrence of y in the body of the let will see the inner binding of ?x, so (f 9) will return 14.

7.4.6. Linear implicit parameters

Linear implicit parameters are an idea developed by Koen Claessen, Mark Shields, and Simon PJ. They address the long-standing problem that monads seem over-kill for certain sorts of problem, notably:

  • distributing a supply of unique names

  • distributing a supply of random numbers

  • distributing an oracle (as in QuickCheck)

Linear implicit parameters are just like ordinary implicit parameters, except that they are "linear" -- that is, they cannot be copied, and must be explicitly "split" instead. Linear implicit parameters are written '%x' instead of '?x'. (The '/' in the '%' suggests the split!)

For example:

    import GHC.Exts( Splittable )

    data NameSupply = ...
    
    splitNS :: NameSupply -> (NameSupply, NameSupply)
    newName :: NameSupply -> Name

    instance Splittable NameSupply where
	split = splitNS


    f :: (%ns :: NameSupply) => Env -> Expr -> Expr
    f env (Lam x e) = Lam x' (f env e)
		    where
		      x'   = newName %ns
		      env' = extend env x x'
    ...more equations for f...

Notice that the implicit parameter %ns is consumed

  • once by the call to newName

  • once by the recursive call to f

So the translation done by the type checker makes the parameter explicit:

    f :: NameSupply -> Env -> Expr -> Expr
    f ns env (Lam x e) = Lam x' (f ns1 env e)
		       where
	 		 (ns1,ns2) = splitNS ns
			 x' = newName ns2
			 env = extend env x x'

Notice the call to 'split' introduced by the type checker. How did it know to use 'splitNS'? Because what it really did was to introduce a call to the overloaded function 'split', defined by the class Splittable:

	class Splittable a where
	  split :: a -> (a,a)

The instance for Splittable NameSupply tells GHC how to implement split for name supplies. But we can simply write

	g x = (x, %ns, %ns)

and GHC will infer

	g :: (Splittable a, %ns :: a) => b -> (b,a,a)

The Splittable class is built into GHC. It's exported by module GHC.Exts.

Other points:

  • '?x' and '%x' are entirely distinct implicit parameters: you can use them together and they won't intefere with each other.

  • You can bind linear implicit parameters in 'with' clauses.

  • You cannot have implicit parameters (whether linear or not) in the context of a class or instance declaration.

7.4.6.1. Warnings

The monomorphism restriction is even more important than usual. Consider the example above:

    f :: (%ns :: NameSupply) => Env -> Expr -> Expr
    f env (Lam x e) = Lam x' (f env e)
		    where
		      x'   = newName %ns
		      env' = extend env x x'

If we replaced the two occurrences of x' by (newName %ns), which is usually a harmless thing to do, we get:

    f :: (%ns :: NameSupply) => Env -> Expr -> Expr
    f env (Lam x e) = Lam (newName %ns) (f env e)
		    where
		      env' = extend env x (newName %ns)

But now the name supply is consumed in three places (the two calls to newName,and the recursive call to f), so the result is utterly different. Urk! We don't even have the beta rule.

Well, this is an experimental change. With implicit parameters we have already lost beta reduction anyway, and (as John Launchbury puts it) we can't sensibly reason about Haskell programs without knowing their typing.

7.4.6.2. Recursive functions

Linear implicit parameters can be particularly tricky when you have a recursive function Consider

        foo :: %x::T => Int -> [Int]
        foo 0 = []
        foo n = %x : foo (n-1)

where T is some type in class Splittable.

Do you get a list of all the same T's or all different T's (assuming that split gives two distinct T's back)?

If you supply the type signature, taking advantage of polymorphic recursion, you get what you'd probably expect. Here's the translated term, where the implicit param is made explicit:

        foo x 0 = []
        foo x n = let (x1,x2) = split x
                  in x1 : foo x2 (n-1)

But if you don't supply a type signature, GHC uses the Hindley Milner trick of using a single monomorphic instance of the function for the recursive calls. That is what makes Hindley Milner type inference work. So the translation becomes

        foo x = let
                  foom 0 = []
                  foom n = x : foom (n-1)
                in
                foom

Result: 'x' is not split, and you get a list of identical T's. So the semantics of the program depends on whether or not foo has a type signature. Yikes!

You may say that this is a good reason to dislike linear implicit parameters and you'd be right. That is why they are an experimental feature.

7.4.7. Functional dependencies

Functional dependencies are implemented as described by Mark Jones in “Type Classes with Functional Dependencies”, Mark P. Jones, In Proceedings of the 9th European Symposium on Programming, ESOP 2000, Berlin, Germany, March 2000, Springer-Verlag LNCS 1782, .

Functional dependencies are introduced by a vertical bar in the syntax of a class declaration; e.g.

  class (Monad m) => MonadState s m | m -> s where ...

  class Foo a b c | a b -> c where ...

There should be more documentation, but there isn't (yet). Yell if you need it.

7.4.8. Explicitly-kinded quantification

Haskell infers the kind of each type variable. Sometimes it is nice to be able to give the kind explicitly as (machine-checked) documentation, just as it is nice to give a type signature for a function. On some occasions, it is essential to do so. For example, in his paper "Restricted Data Types in Haskell" (Haskell Workshop 1999) John Hughes had to define the data type:

     data Set cxt a = Set [a]
                    | Unused (cxt a -> ())

The only use for the Unused constructor was to force the correct kind for the type variable cxt.

GHC now instead allows you to specify the kind of a type variable directly, wherever a type variable is explicitly bound. Namely:

  • data declarations:

      data Set (cxt :: * -> *) a = Set [a]
    
  • type declarations:

      type T (f :: * -> *) = f Int
    
  • class declarations:

      class (Eq a) => C (f :: * -> *) a where ...
    
  • forall's in type signatures:

      f :: forall (cxt :: * -> *). Set cxt Int
    

The parentheses are required. Some of the spaces are required too, to separate the lexemes. If you write (f::*->*) you will get a parse error, because "::*->*" is a single lexeme in Haskell.

As part of the same extension, you can put kind annotations in types as well. Thus:

   f :: (Int :: *) -> Int
   g :: forall a. a -> (a :: *)

The syntax is

   atype ::= '(' ctype '::' kind ')

The parentheses are required.

7.4.9. Arbitrary-rank polymorphism

Haskell type signatures are implicitly quantified. The new keyword forall allows us to say exactly what this means. For example:

        g :: b -> b

means this:

        g :: forall b. (b -> b)

The two are treated identically.

However, GHC's type system supports arbitrary-rank explicit universal quantification in types. For example, all the following types are legal:

    f1 :: forall a b. a -> b -> a
    g1 :: forall a b. (Ord a, Eq  b) => a -> b -> a

    f2 :: (forall a. a->a) -> Int -> Int
    g2 :: (forall a. Eq a => [a] -> a -> Bool) -> Int -> Int

    f3 :: ((forall a. a->a) -> Int) -> Bool -> Bool

Here, f1 and g1 are rank-1 types, and can be written in standard Haskell (e.g. f1 :: a->b->a). The forall makes explicit the universal quantification that is implicitly added by Haskell.

The functions f2 and g2 have rank-2 types; the forall is on the left of a function arrow. As g2 shows, the polymorphic type on the left of the function arrow can be overloaded.

The function f3 has a rank-3 type; it has rank-2 types on the left of a function arrow.

GHC allows types of arbitrary rank; you can nest foralls arbitrarily deep in function arrows. (GHC used to be restricted to rank 2, but that restriction has now been lifted.) In particular, a forall-type (also called a "type scheme"), including an operational type class context, is legal:

There is one place you cannot put a forall: you cannot instantiate a type variable with a forall-type. So you cannot make a forall-type the argument of a type constructor. So these types are illegal:

    x1 :: [forall a. a->a]
    x2 :: (forall a. a->a, Int)
    x3 :: Maybe (forall a. a->a)

Of course forall becomes a keyword; you can't use forall as a type variable any more!

7.4.9.1. Examples

In a data or newtype declaration one can quantify the types of the constructor arguments. Here are several examples:

data T a = T1 (forall b. b -> b -> b) a

data MonadT m = MkMonad { return :: forall a. a -> m a,
                          bind   :: forall a b. m a -> (a -> m b) -> m b
                        }

newtype Swizzle = MkSwizzle (Ord a => [a] -> [a])

The constructors have rank-2 types:

T1 :: forall a. (forall b. b -> b -> b) -> a -> T a
MkMonad :: forall m. (forall a. a -> m a)
                  -> (forall a b. m a -> (a -> m b) -> m b)
                  -> MonadT m
MkSwizzle :: (Ord a => [a] -> [a]) -> Swizzle

Notice that you don't need to use a forall if there's an explicit context. For example in the first argument of the constructor MkSwizzle, an implicit "forall a." is prefixed to the argument type. The implicit forall quantifies all type variables that are not already in scope, and are mentioned in the type quantified over.

As for type signatures, implicit quantification happens for non-overloaded types too. So if you write this:

  data T a = MkT (Either a b) (b -> b)

it's just as if you had written this:

  data T a = MkT (forall b. Either a b) (forall b. b -> b)

That is, since the type variable b isn't in scope, it's implicitly universally quantified. (Arguably, it would be better to require explicit quantification on constructor arguments where that is what is wanted. Feedback welcomed.)

You construct values of types T1, MonadT, Swizzle by applying the constructor to suitable values, just as usual. For example,

    a1 :: T Int
    a1 = T1 (\xy->x) 3
    
    a2, a3 :: Swizzle
    a2 = MkSwizzle sort
    a3 = MkSwizzle reverse
    
    a4 :: MonadT Maybe
    a4 = let r x = Just x
	     b m k = case m of
		       Just y -> k y
		       Nothing -> Nothing
         in
         MkMonad r b

    mkTs :: (forall b. b -> b -> b) -> a -> [T a]
    mkTs f x y = [T1 f x, T1 f y]

The type of the argument can, as usual, be more general than the type required, as (MkSwizzle reverse) shows. (reverse does not need the Ord constraint.)

When you use pattern matching, the bound variables may now have polymorphic types. For example:

    f :: T a -> a -> (a, Char)
    f (T1 w k) x = (w k x, w 'c' 'd')

    g :: (Ord a, Ord b) => Swizzle -> [a] -> (a -> b) -> [b]
    g (MkSwizzle s) xs f = s (map f (s xs))

    h :: MonadT m -> [m a] -> m [a]
    h m [] = return m []
    h m (x:xs) = bind m x          $ \y ->
                 bind m (h m xs)   $ \ys ->
                 return m (y:ys)

In the function h we use the record selectors return and bind to extract the polymorphic bind and return functions from the MonadT data structure, rather than using pattern matching.

7.4.9.2. Type inference

In general, type inference for arbitrary-rank types is undecidable. GHC uses an algorithm proposed by Odersky and Laufer ("Putting type annotations to work", POPL'96) to get a decidable algorithm by requiring some help from the programmer. We do not yet have a formal specification of "some help" but the rule is this:

For a lambda-bound or case-bound variable, x, either the programmer provides an explicit polymorphic type for x, or GHC's type inference will assume that x's type has no foralls in it.

What does it mean to "provide" an explicit type for x? You can do that by giving a type signature for x directly, using a pattern type signature (Section 7.4.10, “Scoped type variables ”), thus:

     \ f :: (forall a. a->a) -> (f True, f 'c')

Alternatively, you can give a type signature to the enclosing context, which GHC can "push down" to find the type for the variable:

     (\ f -> (f True, f 'c')) :: (forall a. a->a) -> (Bool,Char)

Here the type signature on the expression can be pushed inwards to give a type signature for f. Similarly, and more commonly, one can give a type signature for the function itself:

     h :: (forall a. a->a) -> (Bool,Char)
     h f = (f True, f 'c')

You don't need to give a type signature if the lambda bound variable is a constructor argument. Here is an example we saw earlier:

    f :: T a -> a -> (a, Char)
    f (T1 w k) x = (w k x, w 'c' 'd')

Here we do not need to give a type signature to w, because it is an argument of constructor T1 and that tells GHC all it needs to know.

7.4.9.3. Implicit quantification

GHC performs implicit quantification as follows. At the top level (only) of user-written types, if and only if there is no explicit forall, GHC finds all the type variables mentioned in the type that are not already in scope, and universally quantifies them. For example, the following pairs are equivalent:

  f :: a -> a
  f :: forall a. a -> a

  g (x::a) = let
                h :: a -> b -> b
                h x y = y
             in ...
  g (x::a) = let
                h :: forall b. a -> b -> b
                h x y = y
             in ...

Notice that GHC does not find the innermost possible quantification point. For example:

  f :: (a -> a) -> Int
           -- MEANS
  f :: forall a. (a -> a) -> Int
           -- NOT
  f :: (forall a. a -> a) -> Int


  g :: (Ord a => a -> a) -> Int
           -- MEANS the illegal type
  g :: forall a. (Ord a => a -> a) -> Int
           -- NOT
  g :: (forall a. Ord a => a -> a) -> Int

The latter produces an illegal type, which you might think is silly, but at least the rule is simple. If you want the latter type, you can write your for-alls explicitly. Indeed, doing so is strongly advised for rank-2 types.

7.4.10. Scoped type variables

A lexically scoped type variable can be bound by:

For example:

f (xs::[a]) = ys ++ ys
           where
              ys :: [a]
              ys = reverse xs

The pattern (xs::[a]) includes a type signature for xs. This brings the type variable a into scope; it scopes over all the patterns and right hand sides for this equation for f. In particular, it is in scope at the type signature for y.

At ordinary type signatures, such as that for ys, any type variables mentioned in the type signature that are not in scope are implicitly universally quantified. (If there are no type variables in scope, all type variables mentioned in the signature are universally quantified, which is just as in Haskell 98.) In this case, since a is in scope, it is not universally quantified, so the type of ys is the same as that of xs. In Haskell 98 it is not possible to declare a type for ys; a major benefit of scoped type variables is that it becomes possible to do so.

Scoped type variables are implemented in both GHC and Hugs. Where the implementations differ from the specification below, those differences are noted.

So much for the basic idea. Here are the details.

7.4.10.1. What a scoped type variable means

A lexically-scoped type variable is simply the name for a type. The restriction it expresses is that all occurrences of the same name mean the same type. For example:

  f :: [Int] -> Int -> Int
  f (xs::[a]) (y::a) = (head xs + y) :: a

The pattern type signatures on the left hand side of f express the fact that xs must be a list of things of some type a; and that y must have this same type. The type signature on the expression (head xs) specifies that this expression must have the same type a. There is no requirement that the type named by "a" is in fact a type variable. Indeed, in this case, the type named by "a" is Int. (This is a slight liberalisation from the original rather complex rules, which specified that a pattern-bound type variable should be universally quantified.) For example, all of these are legal:

  t (x::a) (y::a) = x+y*2

  f (x::a) (y::b) = [x,y]       -- a unifies with b

  g (x::a) = x + 1::Int         -- a unifies with Int

  h x = let k (y::a) = [x,y]    -- a is free in the
        in k x                  -- environment

  k (x::a) True    = ...        -- a unifies with Int
  k (x::Int) False = ...

  w :: [b] -> [b]
  w (x::a) = x                  -- a unifies with [b]

7.4.10.2. Scope and implicit quantification

  • All the type variables mentioned in a pattern, that are not already in scope, are brought into scope by the pattern. We describe this set as the type variables bound by the pattern. For example:

      f (x::a) = let g (y::(a,b)) = fst y
                 in
                 g (x,True)
    

    The pattern (x::a) brings the type variable a into scope, as well as the term variable x. The pattern (y::(a,b)) contains an occurrence of the already-in-scope type variable a, and brings into scope the type variable b.

  • The type variable(s) bound by the pattern have the same scope as the term variable(s) bound by the pattern. For example:

      let
        f (x::a) = <...rhs of f...>
        (p::b, q::b) = (1,2)
      in <...body of let...>
    

    Here, the type variable a scopes over the right hand side of f, just like x does; while the type variable b scopes over the body of the let, and all the other definitions in the let, just like p and q do. Indeed, the newly bound type variables also scope over any ordinary, separate type signatures in the let group.

  • The type variables bound by the pattern may be mentioned in ordinary type signatures or pattern type signatures anywhere within their scope.

  • In ordinary type signatures, any type variable mentioned in the signature that is in scope is not universally quantified.

  • Ordinary type signatures do not bring any new type variables into scope (except in the type signature itself!). So this is illegal:

      f :: a -> a
      f x = x::a
    

    It's illegal because a is not in scope in the body of f, so the ordinary signature x::a is equivalent to x::forall a.a; and that is an incorrect typing.

  • The pattern type signature is a monotype:

    • A pattern type signature cannot contain any explicit forall quantification.

    • The type variables bound by a pattern type signature can only be instantiated to monotypes, not to type schemes.

    • There is no implicit universal quantification on pattern type signatures (in contrast to ordinary type signatures).

  • The type variables in the head of a class or instance declaration scope over the methods defined in the where part. For example:

      class C a where
        op :: [a] -> a
    
        op xs = let ys::[a]
                    ys = reverse xs
                in
                head ys
    

    (Not implemented in Hugs yet, Dec 98).

7.4.10.3. Declaration type signatures

A declaration type signature that has explicit quantification (using forall) brings into scope the explicitly-quantified type variables, in the definition of the named function(s). For example:

  f :: forall a. [a] -> [a]
  f (x:xs) = xs ++ [ x :: a ]

The "forall a" brings "a" into scope in the definition of "f".

This only happens if the quantification in f's type signature is explicit. For example:

  g :: [a] -> [a]
  g (x:xs) = xs ++ [ x :: a ]

This program will be rejected, because "a" does not scope over the definition of "f", so "x::a" means "x::forall a. a" by Haskell's usual implicit quantification rules.

7.4.10.4. Where a pattern type signature can occur

A pattern type signature can occur in any pattern. For example:

  • A pattern type signature can be on an arbitrary sub-pattern, not just on a variable:

      f ((x,y)::(a,b)) = (y,x) :: (b,a)
    

  • Pattern type signatures, including the result part, can be used in lambda abstractions:

      (\ (x::a, y) :: a -> x)
    

  • Pattern type signatures, including the result part, can be used in case expressions:

      case e of { ((x::a, y) :: (a,b)) -> x }
    

    Note that the -> symbol in a case alternative leads to difficulties when parsing a type signature in the pattern: in the absence of the extra parentheses in the example above, the parser would try to interpret the -> as a function arrow and give a parse error later.

  • To avoid ambiguity, the type after the “::” in a result pattern signature on a lambda or case must be atomic (i.e. a single token or a parenthesised type of some sort). To see why, consider how one would parse this:

      \ x :: a -> b -> x
    

  • Pattern type signatures can bind existential type variables. For example:

      data T = forall a. MkT [a]
    
      f :: T -> T
      f (MkT [t::a]) = MkT t3
                     where
                       t3::[a] = [t,t,t]
    

  • Pattern type signatures can be used in pattern bindings:

      f x = let (y, z::a) = x in ...
      f1 x                = let (y, z::Int) = x in ...
      f2 (x::(Int,a))     = let (y, z::a)   = x in ...
      f3 :: (b->b)        = \x -> x
    

    In all such cases, the binding is not generalised over the pattern-bound type variables. Thus f3 is monomorphic; f3 has type b -> b for some type b, and not forall b. b -> b. In contrast, the binding

      f4 :: b->b
      f4 = \x -> x
    

    makes a polymorphic function, but b is not in scope anywhere in f4's scope.

Pattern type signatures are completely orthogonal to ordinary, separate type signatures. The two can be used independently or together.

7.4.10.5. Result type signatures

The result type of a function can be given a signature, thus:

  f (x::a) :: [a] = [x,x,x]

The final :: [a] after all the patterns gives a signature to the result type. Sometimes this is the only way of naming the type variable you want:

  f :: Int -> [a] -> [a]
  f n :: ([a] -> [a]) = let g (x::a, y::a) = (y,x)
                        in \xs -> map g (reverse xs `zip` xs)

The type variables bound in a result type signature scope over the right hand side of the definition. However, consider this corner-case:

  rev1 :: [a] -> [a] = \xs -> reverse xs

  foo ys = rev (ys::[a])

The signature on rev1 is considered a pattern type signature, not a result type signature, and the type variables it binds have the same scope as rev1 itself (i.e. the right-hand side of rev1 and the rest of the module too). In particular, the expression (ys::[a]) is OK, because the type variable a is in scope (otherwise it would mean (ys::forall a.[a]), which would be rejected).

As mentioned above, rev1 is made monomorphic by this scoping rule. For example, the following program would be rejected, because it claims that rev1 is polymorphic:

  rev1 :: [b] -> [b]
  rev1 :: [a] -> [a] = \xs -> reverse xs

Result type signatures are not yet implemented in Hugs.

7.4.11. Deriving clause for classes Typeable and Data

Haskell 98 allows the programmer to add "deriving( Eq, Ord )" to a data type declaration, to generate a standard instance declaration for classes specified in the deriving clause. In Haskell 98, the only classes that may appear in the deriving clause are the standard classes Eq, Ord, Enum, Ix, Bounded, Read, and Show.

GHC extends this list with two more classes that may be automatically derived (provided the -fglasgow-exts flag is specified): Typeable, and Data. These classes are defined in the library modules Data.Typeable and Data.Generics respectively, and the appropriate class must be in scope before it can be mentioned in the deriving clause.

7.4.12. Generalised derived instances for newtypes

When you define an abstract type using newtype, you may want the new type to inherit some instances from its representation. In Haskell 98, you can inherit instances of Eq, Ord, Enum and Bounded by deriving them, but for any other classes you have to write an explicit instance declaration. For example, if you define

 
  newtype Dollars = Dollars Int 

and you want to use arithmetic on Dollars, you have to explicitly define an instance of Num:

 
  instance Num Dollars where
    Dollars a + Dollars b = Dollars (a+b)
    ...

All the instance does is apply and remove the newtype constructor. It is particularly galling that, since the constructor doesn't appear at run-time, this instance declaration defines a dictionary which is wholly equivalent to the Int dictionary, only slower!

7.4.12.1.  Generalising the deriving clause

GHC now permits such instances to be derived instead, so one can write

 
  newtype Dollars = Dollars Int deriving (Eq,Show,Num)

and the implementation uses the same Num dictionary for Dollars as for Int. Notionally, the compiler derives an instance declaration of the form

 
  instance Num Int => Num Dollars

which just adds or removes the newtype constructor according to the type.

We can also derive instances of constructor classes in a similar way. For example, suppose we have implemented state and failure monad transformers, such that

 
  instance Monad m => Monad (State s m) 
  instance Monad m => Monad (Failure m)

In Haskell 98, we can define a parsing monad by

 
  type Parser tok m a = State [tok] (Failure m) a

which is automatically a monad thanks to the instance declarations above. With the extension, we can make the parser type abstract, without needing to write an instance of class Monad, via

 
  newtype Parser tok m a = Parser (State [tok] (Failure m) a)
                         deriving Monad

In this case the derived instance declaration is of the form

 
  instance Monad (State [tok] (Failure m)) => Monad (Parser tok m) 

Notice that, since Monad is a constructor class, the instance is a partial application of the new type, not the entire left hand side. We can imagine that the type declaration is ``eta-converted'' to generate the context of the instance declaration.

We can even derive instances of multi-parameter classes, provided the newtype is the last class parameter. In this case, a ``partial application'' of the class appears in the deriving clause. For example, given the class

 
  class StateMonad s m | m -> s where ... 
  instance Monad m => StateMonad s (State s m) where ... 

then we can derive an instance of StateMonad for Parsers by

 
  newtype Parser tok m a = Parser (State [tok] (Failure m) a)
                         deriving (Monad, StateMonad [tok])

The derived instance is obtained by completing the application of the class to the new type:

 
  instance StateMonad [tok] (State [tok] (Failure m)) =>
           StateMonad [tok] (Parser tok m)

As a result of this extension, all derived instances in newtype declarations are treated uniformly (and implemented just by reusing the dictionary for the representation type), except Show and Read, which really behave differently for the newtype and its representation.

7.4.12.2.  A more precise specification

Derived instance declarations are constructed as follows. Consider the declaration (after expansion of any type synonyms)

 
  newtype T v1...vn = T' (S t1...tk vk+1...vn) deriving (c1...cm) 

where

  • S is a type constructor,

  • The t1...tk are types,

  • The vk+1...vn are type variables which do not occur in any of the ti, and

  • The ci are partial applications of classes of the form C t1'...tj', where the arity of C is exactly j+1. That is, C lacks exactly one type argument.

  • None of the ci is Read, Show, Typeable, or Data. These classes should not "look through" the type or its constructor. You can still derive these classes for a newtype, but it happens in the usual way, not via this new mechanism.

Then, for each ci, the derived instance declaration is:

 
  instance ci (S t1...tk vk+1...v) => ci (T v1...vp)

where p is chosen so that T v1...vp is of the right kind for the last parameter of class Ci.

As an example which does not work, consider

 
  newtype NonMonad m s = NonMonad (State s m s) deriving Monad 

Here we cannot derive the instance

 
  instance Monad (State s m) => Monad (NonMonad m) 

because the type variable s occurs in State s m, and so cannot be "eta-converted" away. It is a good thing that this deriving clause is rejected, because NonMonad m is not, in fact, a monad --- for the same reason. Try defining >>= with the correct type: you won't be able to.

Notice also that the order of class parameters becomes important, since we can only derive instances for the last one. If the StateMonad class above were instead defined as

 
  class StateMonad m s | m -> s where ... 

then we would not have been able to derive an instance for the Parser type above. We hypothesise that multi-parameter classes usually have one "main" parameter for which deriving new instances is most interesting.

Lastly, all of this applies only for classes other than Read, Show, Typeable, and Data, for which the built-in derivation applies (section 4.3.3. of the Haskell Report). (For the standard classes Eq, Ord, Ix, and Bounded it is immaterial whether the standard method is used or the one described here.)