Portability	non-portable (GHC extensions)
Stability	internal
Maintainer	cvs-ghc@haskell.org
Safe Haskell	Safe-Infered

GHC.Prim

Contents

The word size story.
Char#
Int#
Word#
Narrowings
Int64#
Word64#
Double#
Float#
Arrays
Byte Arrays
Arrays of arrays
Addr#
Mutable variables
Exceptions
STM-accessible Mutable Variables
Synchronized Mutable Variables
Delay/wait operations
Concurrency primitives
Weak pointers
Stable pointers and names
Unsafe pointer equality
Parallelism
Tag to enum stuff
Bytecode operations
Misc
Etc

Description

GHC's primitive types and operations. Use GHC.Exts from the base package instead of importing this module directly.

Synopsis

The word size story.

Haskell98 specifies that signed integers (type Int) must contain at least 30 bits. GHC always implements Int using the primitive type Int#, whose size equals the MachDeps.h constant WORD_SIZE_IN_BITS. This is normally set based on the config.h parameter SIZEOF_HSWORD, i.e., 32 bits on 32-bit machines, 64 bits on 64-bit machines. However, it can also be explicitly set to a smaller number, e.g., 31 bits, to allow the possibility of using tag bits. Currently GHC itself has only 32-bit and 64-bit variants, but 30 or 31-bit code can be exported as an external core file for use in other back ends.

GHC also implements a primitive unsigned integer type Word# which always has the same number of bits as Int#.

In addition, GHC supports families of explicit-sized integers and words at 8, 16, 32, and 64 bits, with the usual arithmetic operations, comparisons, and a range of conversions. The 8-bit and 16-bit sizes are always represented as Int# and Word#, and the operations implemented in terms of the the primops on these types, with suitable range restrictions on the results (using the narrow$n$Int# and narrow$n$Word# families of primops. The 32-bit sizes are represented using Int# and Word# when WORD_SIZE_IN_BITS $geq$ 32; otherwise, these are represented using distinct primitive types Int32# and Word32#. These (when needed) have a complete set of corresponding operations; however, nearly all of these are implemented as external C functions rather than as primops. Exactly the same story applies to the 64-bit sizes. All of these details are hidden under the PrelInt and PrelWord modules, which use #if-defs to invoke the appropriate types and operators.

Word size also matters for the families of primops for indexing/reading/writing fixed-size quantities at offsets from an array base, address, or foreign pointer. Here, a slightly different approach is taken. The names of these primops are fixed, but their types vary according to the value of WORD_SIZE_IN_BITS. For example, if word size is at least 32 bits then an operator like indexInt32Array# has type ByteArray# -> Int# -> Int#; otherwise it has type ByteArray# -> Int# -> Int32#. This approach confines the necessary #if-defs to this file; no conditional compilation is needed in the files that expose these primops.

Finally, there are strongly deprecated primops for coercing between Addr#, the primitive type of machine addresses, and Int#. These are pretty bogus anyway, but will work on existing 32-bit and 64-bit GHC targets; they are completely bogus when tag bits are used in Int#, so are not available in this case.

Char#

Operations on 31-bit characters.

data Char# Source

gtChar# :: Char# -> Char# -> Bool Source

geChar# :: Char# -> Char# -> Bool Source

eqChar# :: Char# -> Char# -> Bool Source

neChar# :: Char# -> Char# -> Bool Source

ltChar# :: Char# -> Char# -> Bool Source

leChar# :: Char# -> Char# -> Bool Source

ord# :: Char# -> Int#Source

Int#

Operations on native-size integers (30+ bits).

data Int# Source

(+#) :: Int# -> Int# -> Int#Source

(-#) :: Int# -> Int# -> Int#Source

(*#) :: Int# -> Int# -> Int#Source

Low word of signed integer multiply.

mulIntMayOflo# :: Int# -> Int# -> Int#Source

Return non-zero if there is any possibility that the upper word of a signed integer multiply might contain useful information. Return zero only if you are completely sure that no overflow can occur. On a 32-bit platform, the recommmended implementation is to do a 32 x 32 -> 64 signed multiply, and subtract result[63:32] from (result[31] >>signed 31). If this is zero, meaning that the upper word is merely a sign extension of the lower one, no overflow can occur.

On a 64-bit platform it is not always possible to acquire the top 64 bits of the result. Therefore, a recommended implementation is to take the absolute value of both operands, and return 0 iff bits[63:31] of them are zero, since that means that their magnitudes fit within 31 bits, so the magnitude of the product must fit into 62 bits.

If in doubt, return non-zero, but do make an effort to create the correct answer for small args, since otherwise the performance of (*) :: Integer -> Integer -> Integer will be poor.

quotInt# :: Int# -> Int# -> Int#Source

Rounds towards zero.

remInt# :: Int# -> Int# -> Int#Source

Satisfies (quotInt# x y) *# y +# (remInt# x y) == x.

negateInt# :: Int# -> Int#Source

addIntC# :: Int# -> Int# -> (#Int#, Int##)Source

Add with carry. First member of result is (wrapped) sum; second member is 0 iff no overflow occured.

subIntC# :: Int# -> Int# -> (#Int#, Int##)Source

Subtract with carry. First member of result is (wrapped) difference; second member is 0 iff no overflow occured.

(>#) :: Int# -> Int# -> Bool Source

(>=#) :: Int# -> Int# -> Bool Source

(==#) :: Int# -> Int# -> Bool Source

(/=#) :: Int# -> Int# -> Bool Source

(<#) :: Int# -> Int# -> Bool Source

(<=#) :: Int# -> Int# -> Bool Source

chr# :: Int# -> Char#Source

int2Word# :: Int# -> Word#Source

int2Float# :: Int# -> Float#Source

int2Double# :: Int# -> Double#Source

uncheckedIShiftL# :: Int# -> Int# -> Int#Source

Shift left. Result undefined if shift amount is not in the range 0 to word size - 1 inclusive.

uncheckedIShiftRA# :: Int# -> Int# -> Int#Source

Shift right arithmetic. Result undefined if shift amount is not in the range 0 to word size - 1 inclusive.

uncheckedIShiftRL# :: Int# -> Int# -> Int#Source

Shift right logical. Result undefined if shift amount is not in the range 0 to word size - 1 inclusive.

Word#

Operations on native-sized unsigned words (30+ bits).

data Word# Source

plusWord# :: Word# -> Word# -> Word#Source

minusWord# :: Word# -> Word# -> Word#Source

timesWord# :: Word# -> Word# -> Word#Source

quotWord# :: Word# -> Word# -> Word#Source

remWord# :: Word# -> Word# -> Word#Source

and# :: Word# -> Word# -> Word#Source

or# :: Word# -> Word# -> Word#Source

xor# :: Word# -> Word# -> Word#Source

not# :: Word# -> Word#Source

uncheckedShiftL# :: Word# -> Int# -> Word#Source

Shift left logical. Result undefined if shift amount is not in the range 0 to word size - 1 inclusive.

uncheckedShiftRL# :: Word# -> Int# -> Word#Source

Shift right logical. Result undefined if shift amount is not in the range 0 to word size - 1 inclusive.

word2Int# :: Word# -> Int#Source

gtWord# :: Word# -> Word# -> Bool Source

geWord# :: Word# -> Word# -> Bool Source

eqWord# :: Word# -> Word# -> Bool Source

neWord# :: Word# -> Word# -> Bool Source

ltWord# :: Word# -> Word# -> Bool Source

leWord# :: Word# -> Word# -> Bool Source

popCnt8# :: Word# -> Word#Source

Count the number of set bits in the lower 8 bits of a word.

popCnt16# :: Word# -> Word#Source

Count the number of set bits in the lower 16 bits of a word.

popCnt32# :: Word# -> Word#Source

Count the number of set bits in the lower 32 bits of a word.

popCnt64# :: Word64# -> Word#Source

Count the number of set bits in a 64-bit word.

popCnt# :: Word# -> Word#Source

Count the number of set bits in a word.

Narrowings

Explicit narrowing of native-sized ints or words.

narrow8Int# :: Int# -> Int#Source

narrow16Int# :: Int# -> Int#Source

narrow32Int# :: Int# -> Int#Source

narrow8Word# :: Word# -> Word#Source

narrow16Word# :: Word# -> Word#Source

narrow32Word# :: Word# -> Word#Source

Int64#

Operations on 64-bit unsigned words. This type is only used if plain Int# has less than 64 bits. In any case, the operations are not primops; they are implemented (if needed) as ccalls instead.

data Int64# Source

Word64#

Operations on 64-bit unsigned words. This type is only used if plain Word# has less than 64 bits. In any case, the operations are not primops; they are implemented (if needed) as ccalls instead.

data Word64# Source

Double#

Operations on double-precision (64 bit) floating-point numbers.

data Double# Source

(>##) :: Double# -> Double# -> Bool Source

(>=##) :: Double# -> Double# -> Bool Source

(==##) :: Double# -> Double# -> Bool Source

(/=##) :: Double# -> Double# -> Bool Source

(<##) :: Double# -> Double# -> Bool Source

(<=##) :: Double# -> Double# -> Bool Source

(+##) :: Double# -> Double# -> Double#Source

(-##) :: Double# -> Double# -> Double#Source

(*##) :: Double# -> Double# -> Double#Source

(/##) :: Double# -> Double# -> Double#Source

negateDouble# :: Double# -> Double#Source

double2Int# :: Double# -> Int#Source

Truncates a Double. Results are undefined if the truncation if truncation yields a value outside the range of Int#.

double2Float# :: Double# -> Float#Source

expDouble# :: Double# -> Double#Source

logDouble# :: Double# -> Double#Source

sqrtDouble# :: Double# -> Double#Source

sinDouble# :: Double# -> Double#Source

cosDouble# :: Double# -> Double#Source

tanDouble# :: Double# -> Double#Source

asinDouble# :: Double# -> Double#Source

acosDouble# :: Double# -> Double#Source

atanDouble# :: Double# -> Double#Source

sinhDouble# :: Double# -> Double#Source

coshDouble# :: Double# -> Double#Source

tanhDouble# :: Double# -> Double#Source

(**##) :: Double# -> Double# -> Double#Source

Exponentiation.

decodeDouble_2Int# :: Double# -> (#Int#, Word#, Word#, Int##)Source

Convert to integer. First component of the result is -1 or 1, indicating the sign of the mantissa. The next two are the high and low 32 bits of the mantissa respectively, and the last is the exponent.

Float#

Operations on single-precision (32-bit) floating-point numbers.

data Float# Source

gtFloat# :: Float# -> Float# -> Bool Source

geFloat# :: Float# -> Float# -> Bool Source

eqFloat# :: Float# -> Float# -> Bool Source

neFloat# :: Float# -> Float# -> Bool Source

ltFloat# :: Float# -> Float# -> Bool Source

leFloat# :: Float# -> Float# -> Bool Source

plusFloat# :: Float# -> Float# -> Float#Source

minusFloat# :: Float# -> Float# -> Float#Source

timesFloat# :: Float# -> Float# -> Float#Source

divideFloat# :: Float# -> Float# -> Float#Source

negateFloat# :: Float# -> Float#Source

float2Int# :: Float# -> Int#Source

Truncates a Float. Results are undefined if the truncation if truncation yields a value outside the range of Int#.

expFloat# :: Float# -> Float#Source

logFloat# :: Float# -> Float#Source

sqrtFloat# :: Float# -> Float#Source

sinFloat# :: Float# -> Float#Source

cosFloat# :: Float# -> Float#Source

tanFloat# :: Float# -> Float#Source

asinFloat# :: Float# -> Float#Source

acosFloat# :: Float# -> Float#Source

atanFloat# :: Float# -> Float#Source

sinhFloat# :: Float# -> Float#Source

coshFloat# :: Float# -> Float#Source

tanhFloat# :: Float# -> Float#Source

powerFloat# :: Float# -> Float# -> Float#Source

float2Double# :: Float# -> Double#Source

decodeFloat_Int# :: Float# -> (#Int#, Int##)Source

Convert to integers. First Int# in result is the mantissa; second is the exponent.

Arrays

Operations on Array#.

data Array# a Source

data MutableArray# s a Source

newArray# :: Int# -> a -> State# s -> (#State# s, MutableArray# s a#)Source

Create a new mutable array with the specified number of elements, in the specified state thread, with each element containing the specified initial value.

sameMutableArray# :: MutableArray# s a -> MutableArray# s a -> Bool Source

readArray# :: MutableArray# s a -> Int# -> State# s -> (#State# s, a#)Source

Read from specified index of mutable array. Result is not yet evaluated.

writeArray# :: MutableArray# s a -> Int# -> a -> State# s -> State# sSource

Write to specified index of mutable array.

sizeofArray# :: Array# a -> Int#Source

Return the number of elements in the array.

sizeofMutableArray# :: MutableArray# s a -> Int#Source

Return the number of elements in the array.

indexArray# :: Array# a -> Int# -> (#a#)Source

Read from specified index of immutable array. Result is packaged into an unboxed singleton; the result itself is not yet evaluated.

unsafeFreezeArray# :: MutableArray# s a -> State# s -> (#State# s, Array# a#)Source

Make a mutable array immutable, without copying.

unsafeThawArray# :: Array# a -> State# s -> (#State# s, MutableArray# s a#)Source

Make an immutable array mutable, without copying.

copyArray# :: Array# a -> Int# -> MutableArray# s a -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the Array. Both arrays must fully contain the specified ranges, but this is not checked. The two arrays must not be the same array in different states, but this is not checked either.

copyMutableArray# :: MutableArray# s a -> Int# -> MutableArray# s a -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the first MutableArray. Both arrays must fully contain the specified ranges, but this is not checked.

cloneArray# :: Array# a -> Int# -> Int# -> Array# aSource

Return a newly allocated Array. The provided Arrays, but this is not checked.

cloneMutableArray# :: MutableArray# s a -> Int# -> Int# -> State# s -> (#State# s, MutableArray# s a#)Source

Return a newly allocated Array. The provided MutableArrays, but this is not checked.

freezeArray# :: MutableArray# s a -> Int# -> Int# -> State# s -> (#State# s, Array# a#)Source

Return a newly allocated Array. The provided MutableArrays, but this is not checked.

thawArray# :: Array# a -> Int# -> Int# -> State# s -> (#State# s, MutableArray# s a#)Source

Return a newly allocated Array. The provided Arrays, but this is not checked.

Byte Arrays

Operations on ByteArray#. A ByteArray# is a just a region of raw memory in the garbage-collected heap, which is not scanned for pointers. It carries its own size (in bytes). There are three sets of operations for accessing byte array contents: index for reading from immutable byte arrays, and read/write for mutable byte arrays. Each set contains operations for a range of useful primitive data types. Each operation takes an offset measured in terms of the size of the primitive type being read or written.

data ByteArray# Source

data MutableByteArray# s Source

newByteArray# :: Int# -> State# s -> (#State# s, MutableByteArray# s#)Source

Create a new mutable byte array of specified size (in bytes), in the specified state thread.

newPinnedByteArray# :: Int# -> State# s -> (#State# s, MutableByteArray# s#)Source

Create a mutable byte array that the GC guarantees not to move.

newAlignedPinnedByteArray# :: Int# -> Int# -> State# s -> (#State# s, MutableByteArray# s#)Source

Create a mutable byte array, aligned by the specified amount, that the GC guarantees not to move.

byteArrayContents# :: ByteArray# -> Addr#Source

Intended for use with pinned arrays; otherwise very unsafe!

sameMutableByteArray# :: MutableByteArray# s -> MutableByteArray# s -> Bool Source

unsafeFreezeByteArray# :: MutableByteArray# s -> State# s -> (#State# s, ByteArray##)Source

Make a mutable byte array immutable, without copying.

sizeofByteArray# :: ByteArray# -> Int#Source

Return the size of the array in bytes.

sizeofMutableByteArray# :: MutableByteArray# s -> Int#Source

Return the size of the array in bytes.

indexCharArray# :: ByteArray# -> Int# -> Char#Source

Read 8-bit character; offset in bytes.

indexWideCharArray# :: ByteArray# -> Int# -> Char#Source

Read 31-bit character; offset in 4-byte words.

indexIntArray# :: ByteArray# -> Int# -> Int#Source

indexWordArray# :: ByteArray# -> Int# -> Word#Source

indexAddrArray# :: ByteArray# -> Int# -> Addr#Source

indexFloatArray# :: ByteArray# -> Int# -> Float#Source

indexDoubleArray# :: ByteArray# -> Int# -> Double#Source

indexStablePtrArray# :: ByteArray# -> Int# -> StablePtr# aSource

indexInt8Array# :: ByteArray# -> Int# -> Int#Source

indexInt16Array# :: ByteArray# -> Int# -> Int#Source

indexInt32Array# :: ByteArray# -> Int# -> Int#Source

indexInt64Array# :: ByteArray# -> Int# -> Int64#Source

indexWord8Array# :: ByteArray# -> Int# -> Word#Source

indexWord16Array# :: ByteArray# -> Int# -> Word#Source

indexWord32Array# :: ByteArray# -> Int# -> Word#Source

indexWord64Array# :: ByteArray# -> Int# -> Word64#Source

readCharArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Char##)Source

Read 8-bit character; offset in bytes.

readWideCharArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Char##)Source

Read 31-bit character; offset in 4-byte words.

readIntArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Int##)Source

readWordArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Word##)Source

readAddrArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Addr##)Source

readFloatArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Float##)Source

readDoubleArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Double##)Source

readStablePtrArray# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, StablePtr# a#)Source

readInt8Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Int##)Source

readInt16Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Int##)Source

readInt32Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Int##)Source

readInt64Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Int64##)Source

readWord8Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Word##)Source

readWord16Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Word##)Source

readWord32Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Word##)Source

readWord64Array# :: MutableByteArray# s -> Int# -> State# s -> (#State# s, Word64##)Source

writeCharArray# :: MutableByteArray# s -> Int# -> Char# -> State# s -> State# sSource

Write 8-bit character; offset in bytes.

writeWideCharArray# :: MutableByteArray# s -> Int# -> Char# -> State# s -> State# sSource

Write 31-bit character; offset in 4-byte words.

writeIntArray# :: MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

writeWordArray# :: MutableByteArray# s -> Int# -> Word# -> State# s -> State# sSource

writeAddrArray# :: MutableByteArray# s -> Int# -> Addr# -> State# s -> State# sSource

writeFloatArray# :: MutableByteArray# s -> Int# -> Float# -> State# s -> State# sSource

writeDoubleArray# :: MutableByteArray# s -> Int# -> Double# -> State# s -> State# sSource

writeStablePtrArray# :: MutableByteArray# s -> Int# -> StablePtr# a -> State# s -> State# sSource

writeInt8Array# :: MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

writeInt16Array# :: MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

writeInt32Array# :: MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

writeInt64Array# :: MutableByteArray# s -> Int# -> Int64# -> State# s -> State# sSource

writeWord8Array# :: MutableByteArray# s -> Int# -> Word# -> State# s -> State# sSource

writeWord16Array# :: MutableByteArray# s -> Int# -> Word# -> State# s -> State# sSource

writeWord32Array# :: MutableByteArray# s -> Int# -> Word# -> State# s -> State# sSource

writeWord64Array# :: MutableByteArray# s -> Int# -> Word64# -> State# s -> State# sSource

copyByteArray# :: ByteArray# -> Int# -> MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the ByteArray. Both arrays must fully contain the specified ranges, but this is not checked. The two arrays must not be the same array in different states, but this is not checked either.

copyMutableByteArray# :: MutableByteArray# s -> Int# -> MutableByteArray# s -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the first MutableByteArray. Both arrays must fully contain the specified ranges, but this is not checked.

Arrays of arrays

Operations on ArrayArray#. An ArrayArray# contains references to {em unpointed} arrays, such as ByteArray#s. Hence, it is not parameterised by the element types, just like a ByteArray#, but it needs to be scanned during GC, just like an Array#. We represent an ArrayArray# exactly as a Array#, but provide element-type-specific indexing, reading, and writing.

data ArrayArray# Source

data MutableArrayArray# s Source

newArrayArray# :: Int# -> State# s -> (#State# s, MutableArrayArray# s#)Source

Create a new mutable array of arrays with the specified number of elements, in the specified state thread, with each element recursively referring to the newly created array.

sameMutableArrayArray# :: MutableArrayArray# s -> MutableArrayArray# s -> Bool Source

unsafeFreezeArrayArray# :: MutableArrayArray# s -> State# s -> (#State# s, ArrayArray##)Source

Make a mutable array of arrays immutable, without copying.

sizeofArrayArray# :: ArrayArray# -> Int#Source

Return the number of elements in the array.

sizeofMutableArrayArray# :: MutableArrayArray# s -> Int#Source

Return the number of elements in the array.

indexByteArrayArray# :: ArrayArray# -> Int# -> ByteArray#Source

indexArrayArrayArray# :: ArrayArray# -> Int# -> ArrayArray#Source

readByteArrayArray# :: MutableArrayArray# s -> Int# -> State# s -> (#State# s, ByteArray##)Source

readMutableByteArrayArray# :: MutableArrayArray# s -> Int# -> State# s -> (#State# s, MutableByteArray# s#)Source

readArrayArrayArray# :: MutableArrayArray# s -> Int# -> State# s -> (#State# s, ArrayArray##)Source

readMutableArrayArrayArray# :: MutableArrayArray# s -> Int# -> State# s -> (#State# s, MutableArrayArray# s#)Source

writeByteArrayArray# :: MutableArrayArray# s -> Int# -> ByteArray# -> State# s -> State# sSource

writeMutableByteArrayArray# :: MutableArrayArray# s -> Int# -> MutableByteArray# s -> State# s -> State# sSource

writeArrayArrayArray# :: MutableArrayArray# s -> Int# -> ArrayArray# -> State# s -> State# sSource

writeMutableArrayArrayArray# :: MutableArrayArray# s -> Int# -> MutableArrayArray# s -> State# s -> State# sSource

copyArrayArray# :: ArrayArray# -> Int# -> MutableArrayArray# s -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the ArrayArray. Both arrays must fully contain the specified ranges, but this is not checked. The two arrays must not be the same array in different states, but this is not checked either.

copyMutableArrayArray# :: MutableArrayArray# s -> Int# -> MutableArrayArray# s -> Int# -> Int# -> State# s -> State# sSource

Copy a range of the first MutableArrayArray# to the specified region in the second MutableArrayArray#. Both arrays must fully contain the specified ranges, but this is not checked.

Addr#

data Addr# Source

An arbitrary machine address assumed to point outside the garbage-collected heap.

nullAddr# :: Addr#Source

The null address.

plusAddr# :: Addr# -> Int# -> Addr#Source

minusAddr# :: Addr# -> Addr# -> Int#Source

Result is meaningless if two Addr#s are so far apart that their difference doesn't fit in an Int#.

remAddr# :: Addr# -> Int# -> Int#Source

Return the remainder when the Addr# arg, treated like an Int#, is divided by the Int# arg.

addr2Int# :: Addr# -> Int#Source

Coerce directly from address to int. Strongly deprecated.

int2Addr# :: Int# -> Addr#Source

Coerce directly from int to address. Strongly deprecated.

gtAddr# :: Addr# -> Addr# -> Bool Source

geAddr# :: Addr# -> Addr# -> Bool Source

eqAddr# :: Addr# -> Addr# -> Bool Source

neAddr# :: Addr# -> Addr# -> Bool Source

ltAddr# :: Addr# -> Addr# -> Bool Source

leAddr# :: Addr# -> Addr# -> Bool Source

indexCharOffAddr# :: Addr# -> Int# -> Char#Source

Reads 8-bit character; offset in bytes.

indexWideCharOffAddr# :: Addr# -> Int# -> Char#Source

Reads 31-bit character; offset in 4-byte words.

indexIntOffAddr# :: Addr# -> Int# -> Int#Source

indexWordOffAddr# :: Addr# -> Int# -> Word#Source

indexAddrOffAddr# :: Addr# -> Int# -> Addr#Source

indexFloatOffAddr# :: Addr# -> Int# -> Float#Source

indexDoubleOffAddr# :: Addr# -> Int# -> Double#Source

indexStablePtrOffAddr# :: Addr# -> Int# -> StablePtr# aSource

indexInt8OffAddr# :: Addr# -> Int# -> Int#Source

indexInt16OffAddr# :: Addr# -> Int# -> Int#Source

indexInt32OffAddr# :: Addr# -> Int# -> Int#Source

indexInt64OffAddr# :: Addr# -> Int# -> Int64#Source

indexWord8OffAddr# :: Addr# -> Int# -> Word#Source

indexWord16OffAddr# :: Addr# -> Int# -> Word#Source

indexWord32OffAddr# :: Addr# -> Int# -> Word#Source

indexWord64OffAddr# :: Addr# -> Int# -> Word64#Source

readCharOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Char##)Source

Reads 8-bit character; offset in bytes.

readWideCharOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Char##)Source

Reads 31-bit character; offset in 4-byte words.

readIntOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Int##)Source

readWordOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Word##)Source

readAddrOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Addr##)Source

readFloatOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Float##)Source

readDoubleOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Double##)Source

readStablePtrOffAddr# :: Addr# -> Int# -> State# s -> (#State# s, StablePtr# a#)Source

readInt8OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Int##)Source

readInt16OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Int##)Source

readInt32OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Int##)Source

readInt64OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Int64##)Source

readWord8OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Word##)Source

readWord16OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Word##)Source

readWord32OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Word##)Source

readWord64OffAddr# :: Addr# -> Int# -> State# s -> (#State# s, Word64##)Source

writeCharOffAddr# :: Addr# -> Int# -> Char# -> State# s -> State# sSource

writeWideCharOffAddr# :: Addr# -> Int# -> Char# -> State# s -> State# sSource

writeIntOffAddr# :: Addr# -> Int# -> Int# -> State# s -> State# sSource

writeWordOffAddr# :: Addr# -> Int# -> Word# -> State# s -> State# sSource

writeAddrOffAddr# :: Addr# -> Int# -> Addr# -> State# s -> State# sSource

writeFloatOffAddr# :: Addr# -> Int# -> Float# -> State# s -> State# sSource

writeDoubleOffAddr# :: Addr# -> Int# -> Double# -> State# s -> State# sSource

writeStablePtrOffAddr# :: Addr# -> Int# -> StablePtr# a -> State# s -> State# sSource

writeInt8OffAddr# :: Addr# -> Int# -> Int# -> State# s -> State# sSource

writeInt16OffAddr# :: Addr# -> Int# -> Int# -> State# s -> State# sSource

writeInt32OffAddr# :: Addr# -> Int# -> Int# -> State# s -> State# sSource

writeInt64OffAddr# :: Addr# -> Int# -> Int64# -> State# s -> State# sSource

writeWord8OffAddr# :: Addr# -> Int# -> Word# -> State# s -> State# sSource

writeWord16OffAddr# :: Addr# -> Int# -> Word# -> State# s -> State# sSource

writeWord32OffAddr# :: Addr# -> Int# -> Word# -> State# s -> State# sSource

writeWord64OffAddr# :: Addr# -> Int# -> Word64# -> State# s -> State# sSource

Mutable variables

Operations on MutVar#s.

data MutVar# s a Source

A MutVar# behaves like a single-element mutable array.

newMutVar# :: a -> State# s -> (#State# s, MutVar# s a#)Source

Create MutVar# with specified initial value in specified state thread.

readMutVar# :: MutVar# s a -> State# s -> (#State# s, a#)Source

Read contents of MutVar#. Result is not yet evaluated.

writeMutVar# :: MutVar# s a -> a -> State# s -> State# sSource

Write contents of MutVar#.

sameMutVar# :: MutVar# s a -> MutVar# s a -> Bool Source

atomicModifyMutVar# :: MutVar# s a -> (a -> b) -> State# s -> (#State# s, c#)Source

casMutVar# :: MutVar# s a -> a -> a -> State# s -> (#State# s, Int#, a#)Source

Exceptions

catch# :: (State# RealWorld -> (#State# RealWorld, a#)) -> (b -> State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

raise# :: a -> bSource

raiseIO# :: a -> State# RealWorld -> (#State# RealWorld, b#)Source

maskAsyncExceptions# :: (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

maskUninterruptible# :: (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

unmaskAsyncExceptions# :: (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

getMaskingState# :: State# RealWorld -> (#State# RealWorld, Int##)Source

STM-accessible Mutable Variables

data TVar# s a Source

atomically# :: (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

retry# :: State# RealWorld -> (#State# RealWorld, a#)Source

catchRetry# :: (State# RealWorld -> (#State# RealWorld, a#)) -> (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

catchSTM# :: (State# RealWorld -> (#State# RealWorld, a#)) -> (b -> State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, a#)Source

check# :: (State# RealWorld -> (#State# RealWorld, a#)) -> State# RealWorld -> (#State# RealWorld, ()#)Source

newTVar# :: a -> State# s -> (#State# s, TVar# s a#)Source

Create a new TVar# holding a specified initial value.

readTVar# :: TVar# s a -> State# s -> (#State# s, a#)Source

Read contents of TVar#. Result is not yet evaluated.

readTVarIO# :: TVar# s a -> State# s -> (#State# s, a#)Source

Read contents of TVar# outside an STM transaction

writeTVar# :: TVar# s a -> a -> State# s -> State# sSource

Write contents of TVar#.

sameTVar# :: TVar# s a -> TVar# s a -> Bool Source

Synchronized Mutable Variables

Operations on MVar#s.

data MVar# s a Source

A shared mutable variable (not the same as a MutVar#!). (Note: in a non-concurrent implementation, (MVar# a) can be represented by (MutVar# (Maybe a)).)

newMVar# :: State# s -> (#State# s, MVar# s a#)Source

Create new MVar#; initially empty.

takeMVar# :: MVar# s a -> State# s -> (#State# s, a#)Source

If MVar# is empty, block until it becomes full. Then remove and return its contents, and set it empty.

tryTakeMVar# :: MVar# s a -> State# s -> (#State# s, Int#, a#)Source

If MVar# is empty, immediately return with integer 0 and value undefined. Otherwise, return with integer 1 and contents of MVar#, and set MVar# empty.

putMVar# :: MVar# s a -> a -> State# s -> State# sSource

If MVar# is full, block until it becomes empty. Then store value arg as its new contents.

tryPutMVar# :: MVar# s a -> a -> State# s -> (#State# s, Int##)Source

If MVar# is full, immediately return with integer 0. Otherwise, store value arg as MVar#'s new contents, and return with integer 1.

sameMVar# :: MVar# s a -> MVar# s a -> Bool Source

isEmptyMVar# :: MVar# s a -> State# s -> (#State# s, Int##)Source

Return 1 if MVar# is empty; 0 otherwise.

Delay/wait operations

delay# :: Int# -> State# s -> State# sSource

Sleep specified number of microseconds.

waitRead# :: Int# -> State# s -> State# sSource

Block until input is available on specified file descriptor.

waitWrite# :: Int# -> State# s -> State# sSource

Block until output is possible on specified file descriptor.

Concurrency primitives

data State# s Source

State# is the primitive, unlifted type of states. It has one type parameter, thus State# RealWorld, or State# s, where s is a type variable. The only purpose of the type parameter is to keep different state threads separate. It is represented by nothing at all.

data RealWorld Source

RealWorld is deeply magical. It is primitive, but it is not unlifted (hence ptrArg). We never manipulate values of type RealWorld; it's only used in the type system, to parameterise State#.

data ThreadId# Source

(In a non-concurrent implementation, this can be a singleton type, whose (unique) value is returned by myThreadId#. The other operations can be omitted.)

fork# :: a -> State# RealWorld -> (#State# RealWorld, ThreadId##)Source

forkOn# :: Int# -> a -> State# RealWorld -> (#State# RealWorld, ThreadId##)Source

killThread# :: ThreadId# -> a -> State# RealWorld -> State# RealWorld Source

yield# :: State# RealWorld -> State# RealWorld Source

myThreadId# :: State# RealWorld -> (#State# RealWorld, ThreadId##)Source

labelThread# :: ThreadId# -> Addr# -> State# RealWorld -> State# RealWorld Source

isCurrentThreadBound# :: State# RealWorld -> (#State# RealWorld, Int##)Source

noDuplicate# :: State# RealWorld -> State# RealWorld Source

threadStatus# :: ThreadId# -> State# RealWorld -> (#State# RealWorld, Int#, Int#, Int##)Source

Weak pointers

data Weak# b Source

mkWeak# :: o -> b -> c -> State# RealWorld -> (#State# RealWorld, Weak# b#)Source

mkWeakForeignEnv# :: o -> b -> Addr# -> Addr# -> Int# -> Addr# -> State# RealWorld -> (#State# RealWorld, Weak# b#)Source

deRefWeak# :: Weak# a -> State# RealWorld -> (#State# RealWorld, Int#, a#)Source

finalizeWeak# :: Weak# a -> State# RealWorld -> (#State# RealWorld, Int#, State# RealWorld -> (#State# RealWorld, ()#)#)Source

touch# :: o -> State# RealWorld -> State# RealWorld Source

Stable pointers and names

data StablePtr# a Source

data StableName# a Source

makeStablePtr# :: a -> State# RealWorld -> (#State# RealWorld, StablePtr# a#)Source

deRefStablePtr# :: StablePtr# a -> State# RealWorld -> (#State# RealWorld, a#)Source

eqStablePtr# :: StablePtr# a -> StablePtr# a -> Int#Source

makeStableName# :: a -> State# RealWorld -> (#State# RealWorld, StableName# a#)Source

eqStableName# :: StableName# a -> StableName# a -> Int#Source

stableNameToInt# :: StableName# a -> Int#Source

Unsafe pointer equality

reallyUnsafePtrEquality# :: a -> a -> Int#Source

Parallelism

par# :: a -> Int#Source

spark# :: a -> State# s -> (#State# s, a#)Source

seq# :: a -> State# s -> (#State# s, a#)Source

getSpark# :: State# s -> (#State# s, Int#, a#)Source

numSparks# :: State# s -> (#State# s, Int##)Source

Returns the number of sparks in the local spark pool.

parGlobal# :: a -> Int# -> Int# -> Int# -> Int# -> b -> Int#Source

parLocal# :: a -> Int# -> Int# -> Int# -> Int# -> b -> Int#Source

parAt# :: b -> a -> Int# -> Int# -> Int# -> Int# -> c -> Int#Source

parAtAbs# :: a -> Int# -> Int# -> Int# -> Int# -> Int# -> b -> Int#Source

parAtRel# :: a -> Int# -> Int# -> Int# -> Int# -> Int# -> b -> Int#Source

parAtForNow# :: b -> a -> Int# -> Int# -> Int# -> Int# -> c -> Int#Source

Tag to enum stuff

Convert back and forth between values of enumerated types and small integers.

dataToTag# :: a -> Int#Source

tagToEnum# :: Int# -> aSource

Bytecode operations

Support for the bytecode interpreter and linker.

data BCO# Source

Primitive bytecode type.

addrToAny# :: Addr# -> (#a#)Source

Convert an Addr# to a followable Any type.

mkApUpd0# :: BCO# -> (#a#)Source

newBCO# :: ByteArray# -> ByteArray# -> Array# a -> Int# -> ByteArray# -> State# s -> (#State# s, BCO##)Source

unpackClosure# :: a -> (#Addr#, Array# b, ByteArray##)Source

getApStackVal# :: a -> Int# -> (#Int#, b#)Source

Misc

These aren't nearly as wired in as Etc...

getCCSOf# :: a -> State# s -> (#State# s, Addr##)Source

getCurrentCCS# :: a -> State# s -> (#State# s, Addr##)Source

Returns the current CostCentreStack (value is NULL if not profiling). Takes a dummy argument which can be used to avoid the call to getCCCS# being floated out by the simplifier, which would result in an uninformative stack ("CAF").

Etc

Miscellaneous built-ins

seq :: a -> b -> bSource

Evaluates its first argument to head normal form, and then returns its second argument as the result.

inline :: a -> aSource

The call (inline f) arranges that f is inlined, regardless of its size. More precisely, the call (inline f) rewrites to the right-hand side of f's definition. This allows the programmer to control inlining from a particular call site rather than the definition site of the function (c.f. INLINE pragmas in User's Guide, Section 7.10.3, "INLINE and NOINLINE pragmas").

This inlining occurs regardless of the argument to the call or the size of f's definition; it is unconditional. The main caveat is that f's definition must be visible to the compiler. That is, f must be let-bound in the current scope. If no inlining takes place, the inline function expands to the identity function in Phase zero; so its use imposes no overhead.

It is good practice to mark the function with an INLINABLE pragma at its definition, (a) so that GHC guarantees to expose its unfolding regardless of size, and (b) so that you have control over exactly what is inlined.

lazy :: a -> aSource

The lazy function restrains strictness analysis a little. The call (lazy e) means the same as e, but lazy has a magical property so far as strictness analysis is concerned: it is lazy in its first argument, even though its semantics is strict. After strictness analysis has run, calls to lazy are inlined to be the identity function.

This behaviour is occasionally useful when controlling evaluation order. Notably, lazy is used in the library definition of Control.Parallel.par:

par :: a -> b -> b

par x y = case (par# x) of _ -> lazy y

If lazy were not lazy, par would look strict in y which would defeat the whole purpose of par.

Like seq, the argument of lazy can have an unboxed type.

data Any k Source

The type constructor Any is type to which you can unsafely coerce any lifted type, and back.

It is lifted, and hence represented by a pointer
It does not claim to be a data type, and that's important for the code generator, because the code gen may enter a data value but never enters a function value.

It's also used to instantiate un-constrained type variables after type checking. For example, length has type

length :: forall a. [a] -> Int

and the list datacon for the empty list has type

[] :: forall a. [a]

In order to compose these two terms as length [] a type application is required, but there is no constraint on the choice. In this situation GHC uses Any:

length (Any *) ([] (Any *))

Note that Any is kind polymorphic, and takes a kind k as its first argument. The kind of Any is thus forall k. k -> k.

data AnyK Source

The kind AnyK is the kind level counterpart to Any. In a kind polymorphic setting, a similar example to the length of the empty list can be given at the type level:

type family Length (l :: [k]) :: Nat type instance Length [] = Zero

When Length is applied to the empty (promoted) list it will have the kind Length AnyK [].

AnyK is currently not exported and cannot be used directly, but you might see it in debug output from the compiler.

unsafeCoerce# :: a -> bSource

The function unsafeCoerce# allows you to side-step the typechecker entirely. That is, it allows you to coerce any type into any other type. If you use this function, you had better get it right, otherwise segmentation faults await. It is generally used when you want to write a program that you know is well-typed, but where Haskell's type system is not expressive enough to prove that it is well typed.

The following uses of unsafeCoerce# are supposed to work (i.e. not lead to spurious compile-time or run-time crashes):

Casting any lifted type to Any
Casting Any back to the real type
Casting an unboxed type to another unboxed type of the same size (but not coercions between floating-point and integral types)
Casting between two types that have the same runtime representation. One case is when the two types differ only in "phantom" type parameters, for example Ptr Int to Ptr Float, or [Int] to [Float] when the list is known to be empty. Also, a newtype of a type T has the same representation at runtime as T.

Other uses of unsafeCoerce# are undefined. In particular, you should not use unsafeCoerce# to cast a T to an algebraic data type D, unless T is also an algebraic data type. For example, do not cast Int->Int to Bool, even if you later cast that Bool back to Int->Int before applying it. The reasons have to do with GHC's internal representation details (for the congnoscenti, data values can be entered but function closures cannot). If you want a safe type to cast things to, use Any, which is not an algebraic data type.

traceEvent# :: Addr# -> State# s -> State# sSource

Emits an event via the RTS tracing framework. The contents of the event is the zero-terminated byte string passed as the first argument. The event will be emitted either to the .eventlog file, or to stderr, depending on the runtime RTS flags.