Copyright | Isaac Jones 2003-2004 Duncan Coutts 2007 |
---|---|
Maintainer | cabal-devel@haskell.org |
Portability | portable |
Safe Haskell | None |
Language | Haskell98 |
This is a big module, but not very complicated. The code is very regular
and repetitive. It defines the command line interface for all the Cabal
commands. For each command (like configure
, build
etc) it defines a type
that holds all the flags, the default set of flags and a CommandUI
that
maps command line flags to and from the corresponding flags type.
All the flags types are instances of Monoid
, see
http://www.haskell.org/pipermail/cabal-devel/2007-December/001509.html
for an explanation.
The types defined here get used in the front end and especially in
cabal-install
which has to do quite a bit of manipulating sets of command
line flags.
This is actually relatively nice, it works quite well. The main change it needs is to unify it with the code for managing sets of fields that can be read and written from files. This would allow us to save configure flags in config files.
- data GlobalFlags = GlobalFlags {}
- emptyGlobalFlags :: GlobalFlags
- defaultGlobalFlags :: GlobalFlags
- globalCommand :: CommandUI GlobalFlags
- data ConfigFlags = ConfigFlags {
- configPrograms :: ProgramConfiguration
- configProgramPaths :: [(String, FilePath)]
- configProgramArgs :: [(String, [String])]
- configProgramPathExtra :: [FilePath]
- configHcFlavor :: Flag CompilerFlavor
- configHcPath :: Flag FilePath
- configHcPkg :: Flag FilePath
- configVanillaLib :: Flag Bool
- configProfLib :: Flag Bool
- configSharedLib :: Flag Bool
- configDynExe :: Flag Bool
- configProfExe :: Flag Bool
- configConfigureArgs :: [String]
- configOptimization :: Flag OptimisationLevel
- configProgPrefix :: Flag PathTemplate
- configProgSuffix :: Flag PathTemplate
- configInstallDirs :: InstallDirs (Flag PathTemplate)
- configScratchDir :: Flag FilePath
- configExtraLibDirs :: [FilePath]
- configExtraIncludeDirs :: [FilePath]
- configDistPref :: Flag FilePath
- configVerbosity :: Flag Verbosity
- configUserInstall :: Flag Bool
- configPackageDBs :: [Maybe PackageDB]
- configGHCiLib :: Flag Bool
- configSplitObjs :: Flag Bool
- configStripExes :: Flag Bool
- configConstraints :: [Dependency]
- configConfigurationsFlags :: FlagAssignment
- configTests :: Flag Bool
- configBenchmarks :: Flag Bool
- configLibCoverage :: Flag Bool
- emptyConfigFlags :: ConfigFlags
- defaultConfigFlags :: ProgramConfiguration -> ConfigFlags
- configureCommand :: ProgramConfiguration -> CommandUI ConfigFlags
- configAbsolutePaths :: ConfigFlags -> IO ConfigFlags
- data CopyFlags = CopyFlags {}
- emptyCopyFlags :: CopyFlags
- defaultCopyFlags :: CopyFlags
- copyCommand :: CommandUI CopyFlags
- data InstallFlags = InstallFlags {}
- emptyInstallFlags :: InstallFlags
- defaultInstallFlags :: InstallFlags
- installCommand :: CommandUI InstallFlags
- data HaddockFlags = HaddockFlags {
- haddockProgramPaths :: [(String, FilePath)]
- haddockProgramArgs :: [(String, [String])]
- haddockHoogle :: Flag Bool
- haddockHtml :: Flag Bool
- haddockHtmlLocation :: Flag String
- haddockExecutables :: Flag Bool
- haddockTestSuites :: Flag Bool
- haddockBenchmarks :: Flag Bool
- haddockInternal :: Flag Bool
- haddockCss :: Flag FilePath
- haddockHscolour :: Flag Bool
- haddockHscolourCss :: Flag FilePath
- haddockContents :: Flag PathTemplate
- haddockDistPref :: Flag FilePath
- haddockKeepTempFiles :: Flag Bool
- haddockVerbosity :: Flag Verbosity
- emptyHaddockFlags :: HaddockFlags
- defaultHaddockFlags :: HaddockFlags
- haddockCommand :: CommandUI HaddockFlags
- data HscolourFlags = HscolourFlags {}
- emptyHscolourFlags :: HscolourFlags
- defaultHscolourFlags :: HscolourFlags
- hscolourCommand :: CommandUI HscolourFlags
- data BuildFlags = BuildFlags {
- buildProgramPaths :: [(String, FilePath)]
- buildProgramArgs :: [(String, [String])]
- buildDistPref :: Flag FilePath
- buildVerbosity :: Flag Verbosity
- buildArgs :: [String]
- emptyBuildFlags :: BuildFlags
- defaultBuildFlags :: BuildFlags
- buildCommand :: ProgramConfiguration -> CommandUI BuildFlags
- buildVerbose :: BuildFlags -> Verbosity
- data ReplFlags = ReplFlags {
- replProgramPaths :: [(String, FilePath)]
- replProgramArgs :: [(String, [String])]
- replDistPref :: Flag FilePath
- replVerbosity :: Flag Verbosity
- replReload :: Flag Bool
- defaultReplFlags :: ReplFlags
- replCommand :: ProgramConfiguration -> CommandUI ReplFlags
- data CleanFlags = CleanFlags {}
- emptyCleanFlags :: CleanFlags
- defaultCleanFlags :: CleanFlags
- cleanCommand :: CommandUI CleanFlags
- data RegisterFlags = RegisterFlags {}
- emptyRegisterFlags :: RegisterFlags
- defaultRegisterFlags :: RegisterFlags
- registerCommand :: CommandUI RegisterFlags
- unregisterCommand :: CommandUI RegisterFlags
- data SDistFlags = SDistFlags {}
- emptySDistFlags :: SDistFlags
- defaultSDistFlags :: SDistFlags
- sdistCommand :: CommandUI SDistFlags
- data TestFlags = TestFlags {}
- emptyTestFlags :: TestFlags
- defaultTestFlags :: TestFlags
- testCommand :: CommandUI TestFlags
- data TestShowDetails
- data BenchmarkFlags = BenchmarkFlags {}
- emptyBenchmarkFlags :: BenchmarkFlags
- defaultBenchmarkFlags :: BenchmarkFlags
- benchmarkCommand :: CommandUI BenchmarkFlags
- data CopyDest
- configureArgs :: Bool -> ConfigFlags -> [String]
- configureOptions :: ShowOrParseArgs -> [OptionField ConfigFlags]
- configureCCompiler :: Verbosity -> ProgramConfiguration -> IO (FilePath, [String])
- configureLinker :: Verbosity -> ProgramConfiguration -> IO (FilePath, [String])
- buildOptions :: ProgramConfiguration -> ShowOrParseArgs -> [OptionField BuildFlags]
- installDirsOptions :: [OptionField (InstallDirs (Flag PathTemplate))]
- programConfigurationOptions :: ProgramConfiguration -> ShowOrParseArgs -> (flags -> [(String, [String])]) -> ([(String, [String])] -> flags -> flags) -> [OptionField flags]
- programConfigurationPaths' :: (String -> String) -> ProgramConfiguration -> ShowOrParseArgs -> (flags -> [(String, FilePath)]) -> ([(String, FilePath)] -> flags -> flags) -> [OptionField flags]
- defaultDistPref :: FilePath
- data Flag a
- toFlag :: a -> Flag a
- fromFlag :: Flag a -> a
- fromFlagOrDefault :: a -> Flag a -> a
- flagToMaybe :: Flag a -> Maybe a
- flagToList :: Flag a -> [a]
- boolOpt :: SFlags -> SFlags -> MkOptDescr (a -> Flag Bool) (Flag Bool -> a -> a) a
- boolOpt' :: OptFlags -> OptFlags -> MkOptDescr (a -> Flag Bool) (Flag Bool -> a -> a) a
- trueArg :: SFlags -> LFlags -> Description -> (b -> Flag Bool) -> (Flag Bool -> b -> b) -> OptDescr b
- falseArg :: SFlags -> LFlags -> Description -> (b -> Flag Bool) -> (Flag Bool -> b -> b) -> OptDescr b
- optionVerbosity :: (flags -> Flag Verbosity) -> (Flag Verbosity -> flags -> flags) -> OptionField flags
Documentation
data GlobalFlagsSource
Flags that apply at the top level, not to any sub-command.
data ConfigFlagsSource
Flags to configure
command
ConfigFlags | |
|
Flags to copy
: (destdir, copy-prefix (backwards compat), verbosity)
data HaddockFlagsSource
data BuildFlagsSource
BuildFlags | |
|
buildVerbose :: BuildFlags -> VerbositySource
Deprecated: Use buildVerbosity instead
ReplFlags | |
|
data RegisterFlagsSource
Flags to register
and unregister
: (user package, gen-script,
in-place, verbosity)
RegisterFlags | |
|
The location prefix for the copy command.
configureArgs :: Bool -> ConfigFlags -> [String]Source
Arguments to pass to a configure
script, e.g. generated by
autoconf
.
configureCCompiler :: Verbosity -> ProgramConfiguration -> IO (FilePath, [String])Source
configureLinker :: Verbosity -> ProgramConfiguration -> IO (FilePath, [String])Source
programConfigurationOptions :: ProgramConfiguration -> ShowOrParseArgs -> (flags -> [(String, [String])]) -> ([(String, [String])] -> flags -> flags) -> [OptionField flags]Source
For each known program PROG
in progConf
, produce a PROG-options
OptionField
.
programConfigurationPaths' :: (String -> String) -> ProgramConfiguration -> ShowOrParseArgs -> (flags -> [(String, FilePath)]) -> ([(String, FilePath)] -> flags -> flags) -> [OptionField flags]Source
Like programConfigurationPaths
, but allows to customise the option name.
All flags are monoids, they come in two flavours:
- list flags eg
--ghc-option=foo --ghc-option=bar
gives us all the values ["foo", "bar"]
- singular value flags, eg:
--enable-foo --disable-foo
gives us Just False
So this Flag type is for the latter singular kind of flag.
Its monoid instance gives us the behaviour where it starts out as
NoFlag
and later flags override earlier ones.
fromFlagOrDefault :: a -> Flag a -> aSource
flagToMaybe :: Flag a -> Maybe aSource
flagToList :: Flag a -> [a]Source
trueArg :: SFlags -> LFlags -> Description -> (b -> Flag Bool) -> (Flag Bool -> b -> b) -> OptDescr bSource
falseArg :: SFlags -> LFlags -> Description -> (b -> Flag Bool) -> (Flag Bool -> b -> b) -> OptDescr bSource
optionVerbosity :: (flags -> Flag Verbosity) -> (Flag Verbosity -> flags -> flags) -> OptionField flagsSource