Non fatal conditions that may be indicative of an error or problem.

We display these at the normal verbosity level.

Useful status messages.

We display these at the normal verbosity level.

This is for the ordinary helpful status messages that users see. Just enough information to know that things are working but not floods of detail.

More detail on the operation of some action.

We display these messages when the verbosity level is verbose

Detailed internal debugging information

We display these messages when the verbosity level is deafening

A variant of debug that doesn't perform the automatic line wrapping. Produces better output in some cases.

Perform an IO action, catching any IO exceptions and printing an error if one occurs.

Run an IO computation, returning e if it raises a "file does not exist" error.

Run a command and return its output.

The output is assumed to be text in the locale encoding.

Run a command and return its output, errors and exit status. Optionally also supply some input. Also provides control over whether the binary/text mode of the input and output.

Like the Unix xargs program. Useful for when we've got very long command lines that might overflow an OS limit on command line length and so you need to invoke a command multiple times to get all the args in.

Use it with either of the rawSystem variants above. For example:

xargs (32*1024) (rawSystemExit verbosity) prog fixedArgs bigArgs

Look for a program on the path.

Look for a program and try to find it's version number. It can accept either an absolute path or the name of a program binary, in which case we will look for the program on the path.

Same as createDirectoryIfMissing but logs at higher verbosity levels.

Copies a file without copying file permissions. The target file is created with default permissions. Any existing target file is replaced.

At higher verbosity levels it logs an info message.

Copies a bunch of files to a target directory, preserving the directory structure in the target location. The target directories are created if they do not exist.

The files are identified by a pair of base directory and a path relative to that base. It is only the relative part that is preserved in the destination.

For example:

copyFiles normal "dist/src"
   [("", "src/Foo.hs"), ("dist/build/", "src/Bar.hs")]

This would copy "src/Foo.hs" to "dist/src/src/Foo.hs" and copy "dist/build/src/Bar.hs" to "dist/src/src/Bar.hs".

This operation is not atomic. Any IO failure during the copy (including any missing source files) leaves the target in an unknown state so it is best to use it with a freshly created directory so that it can be simply deleted if anything goes wrong.

Given a relative path to a file, copy it to the given directory, preserving the relative path and creating the parent directories if needed.

Install an ordinary file. This is like a file copy but the permissions are set appropriately for an installed file. On Unix it is "-rw-r--r--" while on Windows it uses the default permissions for the target directory.

Install an executable file. This is like a file copy but the permissions are set appropriately for an installed file. On Unix it is "-rwxr-xr-x" while on Windows it uses the default permissions for the target directory.

Install a file that may or not be executable, preserving permissions.

This is like copyFiles but uses installOrdinaryFile.

This is like copyFiles but uses installExecutableFile.

This is like copyFiles but uses installMaybeExecutableFile.

This installs all the files in a directory to a target location, preserving the directory layout. All the files are assumed to be ordinary rather than executable files.

Recursively copy the contents of one directory to another path.

Like doesFileExist, but also checks that the file is executable.

The path name that represents the current directory. In Unix, it's ".", but this is system-specific. (E.g. AmigaOS uses the empty string "" for the current directory.)

Drop the extension if it's one of exeExtensions, or return the path unchanged.

List of possible executable file extensions on the current platform.

Find a file by looking in a search path. The file path must match exactly.

Find a file by looking in a search path with one of a list of possible file extensions. The file base name should be given and it will be tried with each of the extensions in each element of the search path.

Like findFileWithExtension but returns which element of the search path the file was found in, and the file path relative to that base directory.

Find the file corresponding to a Haskell module name.

This is similar to findFileWithExtension' but specialised to a module name. The function fails if the file corresponding to the module is missing.

Finds the files corresponding to a list of Haskell module names.

As findModuleFile but for a list of module names.

List all the files in a directory and all subdirectories.

The order places files in sub-directories after all the files in their parent directories. The list is generated lazily so is not well defined if the source directory structure changes before the list is used.

Is this directory in the system search path?

Compare the modification times of two files to see if the first is newer than the second. The first file must exist but the second need not. The expected use case is when the second file is generated using the first. In this use case, if the result is True then the second file is out of date.

Like moreRecentFile, but also checks that the first file exists.

Advanced options for withTempFile and withTempDirectory.

Use a temporary filename that doesn't already exist.

A version of withTempFile that additionally takes a TempFileOptions argument.

Create and use a temporary directory.

Creates a new temporary directory inside the given directory, making use of the template. The temp directory is deleted after use. For example:

withTempDirectory verbosity "src" "sdist." $ \tmpDir -> do ...

The tmpDir will be a new subdirectory of the given directory, e.g. src/sdist.342.

A version of withTempDirectory that additionally takes a TempFileOptions argument.

Package description file (pkgname.cabal)

Find a package description file in the given directory. Looks for .cabal files.

Like findPackageDesc, but calls die in case of error.

Optional auxiliary package information file (pkgname.buildinfo)

Find auxiliary package information in the given directory. Looks for .buildinfo files.

Gets the contents of a file, but guarantee that it gets closed.

The file is read lazily but if it is not fully consumed by the action then the remaining input is truncated and the file is closed.

Writes a file atomically.

The file is either written successfully or an IO exception is raised and the original file is left unchanged.

On windows it is not possible to delete a file that is open by a process. This case will give an IO exception but the atomic property is not affected.

Write a file but only if it would have new content. If we would be writing the same as the existing content then leave the file as is so that we do not update the file's modification time.

NB: the file is assumed to be ASCII-encoded.

Reads a UTF8 encoded text file as a Unicode String

Reads lazily using ordinary readFile.

Reads a UTF8 encoded text file as a Unicode String

Same behaviour as withFileContents.

Writes a Unicode String as a UTF8 encoded text file.

Uses writeFileAtomic, so provides the same guarantees.

Fix different systems silly line ending conventions

Whether BOM is at the beginning of the input

Check whether a file has Unicode byte order mark (BOM).

Ignore a Unicode byte order mark (BOM) at the beginning of the input

dropWhileEndLE p is equivalent to reverse . dropWhile p . reverse, but quite a bit faster. The difference between "Data.List.dropWhileEnd" and this version is that the one in Data.List is strict in elements, but spine-lazy, while this one is spine-strict but lazy in elements. That's what LE stands for - "lazy in elements".

Example:

> tail $ Data.List.dropWhileEnd (<3) [undefined, 5, 4, 3, 2, 1]
*** Exception: Prelude.undefined
> tail $ dropWhileEndLE (<3) [undefined, 5, 4, 3, 2, 1]
[5,4,3]
> take 3 $ Data.List.dropWhileEnd (<3) [5, 4, 3, 2, 1, undefined]
[5,4,3]
> take 3 $ dropWhileEndLE (<3) [5, 4, 3, 2, 1, undefined]
*** Exception: Prelude.undefined

takeWhileEndLE p is equivalent to reverse . takeWhile p . reverse, but is usually faster (as well as being easier to read).

comparing p x y = compare (p x) (p y)

Useful combinator for use in conjunction with the xxxBy family of functions from Data.List, for example:

  ... sortBy (comparing fst) ...

The isInfixOf function takes two lists and returns True iff the first list is contained, wholly and intact, anywhere within the second.

Example:

isInfixOf "Haskell" "I really like Haskell." == True
isInfixOf "Ial" "I really like Haskell." == False

intercalate xs xss is equivalent to (concat (intersperse xs xss)). It inserts the list xs in between the lists in xss and concatenates the result.

Like "Data.List.union", but has O(n log n) complexity instead of O(n^2).

A right-biased version of listUnion.

Example:

> listUnion [1,2,3,4,3] [2,1,1]
[1,2,3,4,3]
> listUnionRight [1,2,3,4,3] [2,1,1]
[4,3,2,1,1]

Like "Data.List.nub", but has O(n log n) complexity instead of O(n^2). Code for ordNub and listUnion taken from Niklas Hambüchen's ordnub package.

A right-biased version of ordNub.

Example:

> ordNub [1,2,1]
[1,2]
> ordNubRight [1,2,1]
[2,1]

A total variant of tail.

Wraps text to the default line width. Existing newlines are preserved.

Wraps a list of words to a list of lines of words of a particular width.