Cabal-2.0.0.0: A framework for packaging Haskell software

Copyright(c) David Himmelstrup 2005
Bjorn Bringert 2007
Duncan Coutts 2008-2009
Maintainercabal-devel@haskell.org
Portabilityportable
Safe HaskellNone
LanguageHaskell2010

Distribution.Simple.PackageIndex (signature[?])

Contents

Description

An index of packages whose primary key is UnitId. Public libraries are additionally indexed by PackageName and Version. Technically, these are an index of *units* (so we should eventually rename it to UnitIndex); but in the absence of internal libraries or Backpack each unit is equivalent to a package.

PackageIndex is parametric over what it actually records, and it is used in two ways:

  • The InstalledPackageIndex (defined here) contains a graph of InstalledPackageInfos representing the packages in a package database stack. It is used in a variety of ways:

    • The primary use to let Cabal access the same installed package database which is used by GHC during compilation. For example, this data structure is used by 'ghc-pkg' and Cabal to do consistency checks on the database (are the references closed).
    • Given a set of dependencies, we can compute the transitive closure of dependencies. This is to check if the versions of packages are consistent, and also needed by multiple tools (Haddock must be explicitly told about the every transitive package to do cross-package linking; preprocessors must know about the include paths of all transitive dependencies.)
  • The PlanIndex (defined in InstallPlan), contains a graph of GenericPlanPackage. Ignoring its type parameters for a moment, a PlanIndex is an extension of the InstalledPackageIndex to also record nodes for packages which are *planned* to be installed, but not actually installed yet. A PlanIndex containing only PreExisting packages is essentially a PackageIndex.

PlanIndexes actually require some auxiliary information, so most users interact with a GenericInstallPlan. This type is specialized as an ElaboratedInstallPlan (for cabal new-build) or an InstallPlan (for cabal install).

This PackageIndex is NOT to be confused with PackageIndex, which indexes packages only by PackageName (this makes it suitable for indexing source packages, for which we don't know UnitIds.)

Synopsis

Package index data type

type InstalledPackageIndex = PackageIndex InstalledPackageInfo Source #

The default package index which contains InstalledPackageInfo. Normally use this.

data PackageIndex a Source #

The collection of information about packages from one or more PackageDBs. These packages generally should have an instance of PackageInstalled

Packages are uniquely identified in by their UnitId, they can also be efficiently looked up by package name or by name and version.

Instances

Eq a => Eq (PackageIndex a) # 
Read a => Read (PackageIndex a) # 
Show a => Show (PackageIndex a) # 
Generic (PackageIndex a) # 

Associated Types

type Rep (PackageIndex a) :: * -> * Source #

HasUnitId a => Semigroup (PackageIndex a) # 
HasUnitId a => Monoid (PackageIndex a) # 
Binary a => Binary (PackageIndex a) # 
type Rep (PackageIndex a) # 
type Rep (PackageIndex a) = D1 * (MetaData "PackageIndex" "Distribution.Simple.PackageIndex" "Cabal-2.0.0.0" False) (C1 * (MetaCons "PackageIndex" PrefixI True) ((:*:) * (S1 * (MetaSel (Just Symbol "unitIdIndex") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Map UnitId a))) (S1 * (MetaSel (Just Symbol "packageIdIndex") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 * (Map PackageName (Map Version [a]))))))

Creating an index

fromList :: HasUnitId a => [a] -> PackageIndex a Source #

Build an index out of a bunch of packages.

If there are duplicates by UnitId then later ones mask earlier ones.

Updates

merge :: HasUnitId a => PackageIndex a -> PackageIndex a -> PackageIndex a Source #

Merge two indexes.

Packages from the second mask packages from the first if they have the exact same UnitId.

For packages with the same source PackageId, packages from the second are "preferred" over those from the first. Being preferred means they are top result when we do a lookup by source PackageId. This is the mechanism we use to prefer user packages over global packages.

insert :: HasUnitId a => a -> PackageIndex a -> PackageIndex a Source #

Inserts a single package into the index.

This is equivalent to (but slightly quicker than) using mappend or merge with a singleton index.

deleteUnitId :: HasUnitId a => UnitId -> PackageIndex a -> PackageIndex a Source #

Removes a single installed package from the index.

deleteSourcePackageId :: HasUnitId a => PackageId -> PackageIndex a -> PackageIndex a Source #

Removes all packages with this source PackageId from the index.

deletePackageName :: HasUnitId a => PackageName -> PackageIndex a -> PackageIndex a Source #

Removes all packages with this (case-sensitive) name from the index.

Queries

Precise lookups

lookupUnitId :: PackageIndex a -> UnitId -> Maybe a Source #

Does a lookup by unit identifier.

Since multiple package DBs mask each other by UnitId, then we get back at most one package.

lookupComponentId :: PackageIndex a -> ComponentId -> Maybe a Source #

Does a lookup by component identifier. In the absence of Backpack, this is just a lookupUnitId.

lookupSourcePackageId :: PackageIndex a -> PackageId -> [a] Source #

Does a lookup by source package id (name & version).

There can be multiple installed packages with the same source PackageId but different UnitId. They are returned in order of preference, with the most preferred first.

lookupPackageId :: PackageIndex a -> PackageId -> Maybe a Source #

Convenient alias of lookupSourcePackageId, but assuming only one package per package ID.

lookupPackageName :: PackageIndex a -> PackageName -> [(Version, [a])] Source #

Does a lookup by source package name.

lookupDependency :: InstalledPackageIndex -> Dependency -> [(Version, [InstalledPackageInfo])] Source #

Does a lookup by source package name and a range of versions.

We get back any number of versions of the specified package name, all satisfying the version range constraint.

INVARIANT: List of eligible InstalledPackageInfo is non-empty.

Case-insensitive searches

searchByName :: PackageIndex a -> String -> SearchResult [a] Source #

Does a case-insensitive search by package name.

If there is only one package that compares case-insensitively to this name then the search is unambiguous and we get back all versions of that package. If several match case-insensitively but one matches exactly then it is also unambiguous.

If however several match case-insensitively and none match exactly then we have an ambiguous result, and we get back all the versions of all the packages. The list of ambiguous results is split by exact package name. So it is a non-empty list of non-empty lists.

data SearchResult a Source #

Constructors

None 
Unambiguous a 
Ambiguous [a] 

searchByNameSubstring :: PackageIndex a -> String -> [a] Source #

Does a case-insensitive substring search by package name.

That is, all packages that contain the given string in their name.

Bulk queries

allPackages :: PackageIndex a -> [a] Source #

Get all the packages from the index.

allPackagesByName :: PackageIndex a -> [(PackageName, [a])] Source #

Get all the packages from the index.

They are grouped by package name (case-sensitively).

allPackagesBySourcePackageId :: HasUnitId a => PackageIndex a -> [(PackageId, [a])] Source #

Get all the packages from the index.

They are grouped by source package id (package name and version).

Special queries

brokenPackages :: PackageInstalled a => PackageIndex a -> [(a, [UnitId])] Source #

All packages that have immediate dependencies that are not in the index.

Returns such packages along with the dependencies that they're missing.

dependencyClosure :: PackageInstalled a => PackageIndex a -> [UnitId] -> Either (PackageIndex a) [(a, [UnitId])] Source #

Tries to take the transitive closure of the package dependencies.

If the transitive closure is complete then it returns that subset of the index. Otherwise it returns the broken packages as in brokenPackages.

  • Note that if the result is Right [] it is because at least one of the original given PackageIds do not occur in the index.

reverseDependencyClosure :: PackageInstalled a => PackageIndex a -> [UnitId] -> [a] Source #

Takes the transitive closure of the packages reverse dependencies.

dependencyInconsistencies :: InstalledPackageIndex -> [(DepUniqueKey, [(UnitId, [InstalledPackageInfo])])] Source #

Given a package index where we assume we want to use all the packages (use dependencyClosure if you need to get such a index subset) find out if the dependencies within it use consistent versions of each package. Return all cases where multiple packages depend on different versions of some other package.

Each element in the result is a package name along with the packages that depend on it and the versions they require. These are guaranteed to be distinct.

dependencyCycles :: PackageInstalled a => PackageIndex a -> [[a]] Source #

Find if there are any cycles in the dependency graph. If there are no cycles the result is [].

This actually computes the strongly connected components. So it gives us a list of groups of packages where within each group they all depend on each other, directly or indirectly.

dependencyGraph :: PackageInstalled a => PackageIndex a -> (Graph, Vertex -> a, UnitId -> Maybe Vertex) Source #

Builds a graph of the package dependencies.

Dependencies on other packages that are not in the index are discarded. You can check if there are any such dependencies with brokenPackages.

moduleNameIndex :: InstalledPackageIndex -> Map ModuleName [InstalledPackageInfo] Source #

A rough approximation of GHC's module finder, takes a InstalledPackageIndex and turns it into a map from module names to their source packages. It's used to initialize the build-deps field in cabal init.

Backwards compatibility

deleteInstalledPackageId :: HasUnitId a => UnitId -> PackageIndex a -> PackageIndex a Source #

Deprecated: Use deleteUnitId instead

Backwards compatibility wrapper for Cabal pre-1.24.

lookupInstalledPackageId :: PackageIndex a -> UnitId -> Maybe a Source #

Deprecated: Use lookupUnitId instead

Backwards compatibility for Cabal pre-1.24.