Copyright	Isaac Jones 2006, Duncan Coutts 2007-2009
Maintainer	cabal-devel@haskell.org
Portability	portable
Safe Haskell	None
Language	Haskell98

Distribution.Simple.Program

Contents

Program and functions for constructing them
Configured program and related functions
Program invocations
The collection of unconfigured and configured programs
The collection of configured programs we can run
Programs that Cabal knows about
deprecated

Description

This provides an abstraction which deals with configuring and running programs. A Program is a static notion of a known program. A ConfiguredProgram is a Program that has been found on the current machine and is ready to be run (possibly with some user-supplied default args). Configuring a program involves finding its location and if necessary finding its version. There is also a ProgramConfiguration type which holds configured and not-yet configured programs. It is the parameter to lots of actions elsewhere in Cabal that need to look up and run programs. If we had a Cabal monad, the ProgramConfiguration would probably be a reader or state component of it.

The module also defines all the known built-in Programs and the defaultProgramConfiguration which contains them all.

One nice thing about using it is that any program that is registered with Cabal will get some "configure" and ".cabal" helpers like --with-foo-args --foo-path= and extra-foo-args.

There's also good default behavior for trying to find "foo" in PATH, being able to override its location, etc.

There's also a hook for adding programs in a Setup.lhs script. See hookedPrograms in UserHooks. This gives a hook user the ability to get the above flags and such so that they don't have to write all the PATH logic inside Setup.lhs.

Synopsis

Program and functions for constructing them

data Program Source #

Represents a program which can be configured.

Note: rather than constructing this directly, start with simpleProgram and override any extra fields.

Constructors

Program

Fields

programName :: String
The simple name of the program, eg. ghc
programFindLocation :: Verbosity -> ProgramSearchPath -> IO (Maybe (FilePath, [FilePath]))
A function to search for the program if its location was not specified by the user. Usually this will just be a call to findProgramOnSearchPath.
It is supplied with the prevailing search path which will typically just be used as-is, but can be extended or ignored as needed.
For the purpose of change monitoring, in addition to the location where the program was found, it returns all the other places that were tried.
programFindVersion :: Verbosity -> FilePath -> IO (Maybe Version)
Try to find the version of the program. For many programs this is not possible or is not necessary so it's OK to return Nothing.
programPostConf :: Verbosity -> ConfiguredProgram -> IO ConfiguredProgram
A function to do any additional configuration after we have located the program (and perhaps identified its version). For example it could add args, or environment vars.

type ProgramSearchPath = [ProgramSearchPathEntry] Source #

A search path to use when locating executables. This is analogous to the unix $PATH or win32 %PATH% but with the ability to use the system default method for finding executables (findExecutable which on unix is simply looking on the $PATH but on win32 is a bit more complicated).

The default to use is [ProgSearchPathDefault] but you can add extra dirs either before, after or instead of the default, e.g. here we add an extra dir to search after the usual ones.

['ProgramSearchPathDefault', 'ProgramSearchPathDir' dir]

data ProgramSearchPathEntry Source #

Constructors

ProgramSearchPathDir FilePath	A specific dir
ProgramSearchPathDefault	The system default

Instances

Eq ProgramSearchPathEntry #
Methods (==) :: ProgramSearchPathEntry -> ProgramSearchPathEntry -> Bool # (/=) :: ProgramSearchPathEntry -> ProgramSearchPathEntry -> Bool #
Generic ProgramSearchPathEntry #
Associated Types type Rep ProgramSearchPathEntry :: * -> * Source # Methods from :: ProgramSearchPathEntry -> Rep ProgramSearchPathEntry x Source # to :: Rep ProgramSearchPathEntry x -> ProgramSearchPathEntry Source #
Binary ProgramSearchPathEntry #
Methods put :: ProgramSearchPathEntry -> Put Source # get :: Get ProgramSearchPathEntry Source # putList :: [ProgramSearchPathEntry] -> Put Source #
type Rep ProgramSearchPathEntry #
type Rep ProgramSearchPathEntry = D1 (MetaData "ProgramSearchPathEntry" "Distribution.Simple.Program.Find" "Cabal-1.24.0.0" False) ((:+:) (C1 (MetaCons "ProgramSearchPathDir" PrefixI False) (S1 (MetaSel (Nothing Symbol) NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 FilePath))) (C1 (MetaCons "ProgramSearchPathDefault" PrefixI False) U1))

simpleProgram :: String -> Program Source #

Make a simple named program.

By default we'll just search for it in the path and not try to find the version name. You can override these behaviours if necessary, eg:

simpleProgram "foo" { programFindLocation = ... , programFindVersion ... }

findProgramOnSearchPath :: Verbosity -> ProgramSearchPath -> FilePath -> IO (Maybe (FilePath, [FilePath])) Source #

defaultProgramSearchPath :: ProgramSearchPath Source #

findProgramVersion Source #

Arguments

:: String	version args
-> (String -> String)	function to select version number from program output
-> Verbosity
-> FilePath	location
-> IO (Maybe Version)

Look for a program and try to find it's version number. It can accept either an absolute path or the name of a program binary, in which case we will look for the program on the path.

Configured program and related functions

data ConfiguredProgram Source #

Represents a program which has been configured and is thus ready to be run.

These are usually made by configuring a Program, but if you have to construct one directly then start with simpleConfiguredProgram and override any extra fields.

Constructors

ConfiguredProgram

Fields

programId :: String
Just the name again
programVersion :: Maybe Version
The version of this program, if it is known.
programDefaultArgs :: [String]
Default command-line args for this program. These flags will appear first on the command line, so they can be overridden by subsequent flags.
programOverrideArgs :: [String]
Override command-line args for this program. These flags will appear last on the command line, so they override all earlier flags.
programOverrideEnv :: [(String, Maybe String)]
Override environment variables for this program. These env vars will extend/override the prevailing environment of the current to form the environment for the new process.
programProperties :: Map String String
A key-value map listing various properties of the program, useful for feature detection. Populated during the configuration step, key names depend on the specific program.
programLocation :: ProgramLocation
Location of the program. eg. /usr/bin/ghc-6.4
programMonitorFiles :: [FilePath]
In addition to the programLocation where the program was found, these are additional locations that were looked at. The combination of ths found location and these not-found locations can be used to monitor to detect when the re-configuring the program might give a different result (e.g. found in a different location).

Instances

Eq ConfiguredProgram #
Methods (==) :: ConfiguredProgram -> ConfiguredProgram -> Bool # (/=) :: ConfiguredProgram -> ConfiguredProgram -> Bool #
Read ConfiguredProgram #
Methods readsPrec :: Int -> ReadS ConfiguredProgram Source # readList :: ReadS [ConfiguredProgram] Source # readPrec :: ReadPrec ConfiguredProgram Source # readListPrec :: ReadPrec [ConfiguredProgram] Source #
Show ConfiguredProgram #
Methods showsPrec :: Int -> ConfiguredProgram -> ShowS Source # show :: ConfiguredProgram -> String Source # showList :: [ConfiguredProgram] -> ShowS Source #
Generic ConfiguredProgram #
Associated Types type Rep ConfiguredProgram :: * -> * Source # Methods from :: ConfiguredProgram -> Rep ConfiguredProgram x Source # to :: Rep ConfiguredProgram x -> ConfiguredProgram Source #
Binary ConfiguredProgram #
Methods put :: ConfiguredProgram -> Put Source # get :: Get ConfiguredProgram Source # putList :: [ConfiguredProgram] -> Put Source #
type Rep ConfiguredProgram #
type Rep ConfiguredProgram = D1 (MetaData "ConfiguredProgram" "Distribution.Simple.Program.Types" "Cabal-1.24.0.0" False) (C1 (MetaCons "ConfiguredProgram" PrefixI True) ((::) ((::) ((::) (S1 (MetaSel (Just Symbol "programId") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 String)) (S1 (MetaSel (Just Symbol "programVersion") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 (Maybe Version)))) ((::) (S1 (MetaSel (Just Symbol "programDefaultArgs") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 [String])) (S1 (MetaSel (Just Symbol "programOverrideArgs") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 [String])))) ((::) ((::) (S1 (MetaSel (Just Symbol "programOverrideEnv") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 [(String, Maybe String)])) (S1 (MetaSel (Just Symbol "programProperties") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 (Map String String)))) ((:*:) (S1 (MetaSel (Just Symbol "programLocation") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 ProgramLocation)) (S1 (MetaSel (Just Symbol "programMonitorFiles") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 [FilePath]))))))

programPath :: ConfiguredProgram -> FilePath Source #

The full path of a configured program.

type ProgArg = String Source #

data ProgramLocation Source #

Where a program was found. Also tells us whether it's specified by user or not. This includes not just the path, but the program as well.

Constructors

UserSpecified	The user gave the path to this program, eg. --ghc-path=/usr/bin/ghc-6.6
Fields locationPath :: FilePath
FoundOnSystem	The program was found automatically.
Fields locationPath :: FilePath

Instances

Eq ProgramLocation #
Methods (==) :: ProgramLocation -> ProgramLocation -> Bool # (/=) :: ProgramLocation -> ProgramLocation -> Bool #
Read ProgramLocation #
Methods readsPrec :: Int -> ReadS ProgramLocation Source # readList :: ReadS [ProgramLocation] Source # readPrec :: ReadPrec ProgramLocation Source # readListPrec :: ReadPrec [ProgramLocation] Source #
Show ProgramLocation #
Methods showsPrec :: Int -> ProgramLocation -> ShowS Source # show :: ProgramLocation -> String Source # showList :: [ProgramLocation] -> ShowS Source #
Generic ProgramLocation #
Associated Types type Rep ProgramLocation :: * -> * Source # Methods from :: ProgramLocation -> Rep ProgramLocation x Source # to :: Rep ProgramLocation x -> ProgramLocation Source #
Binary ProgramLocation #
Methods put :: ProgramLocation -> Put Source # get :: Get ProgramLocation Source # putList :: [ProgramLocation] -> Put Source #
type Rep ProgramLocation #
type Rep ProgramLocation = D1 (MetaData "ProgramLocation" "Distribution.Simple.Program.Types" "Cabal-1.24.0.0" False) ((:+:) (C1 (MetaCons "UserSpecified" PrefixI True) (S1 (MetaSel (Just Symbol "locationPath") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 FilePath))) (C1 (MetaCons "FoundOnSystem" PrefixI True) (S1 (MetaSel (Just Symbol "locationPath") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 FilePath))))

runProgram Source #

Arguments

:: Verbosity	Verbosity
-> ConfiguredProgram	The program to run
-> [ProgArg]	Any extra arguments to add
-> IO ()

Runs the given configured program.

getProgramOutput Source #

Arguments

:: Verbosity	Verbosity
-> ConfiguredProgram	The program to run
-> [ProgArg]	Any extra arguments to add
-> IO String

Runs the given configured program and gets the output.

suppressOverrideArgs :: ConfiguredProgram -> ConfiguredProgram Source #

Suppress any extra arguments added by the user.

Program invocations

data ProgramInvocation Source #

Represents a specific invocation of a specific program.

This is used as an intermediate type between deciding how to call a program and actually doing it. This provides the opportunity to the caller to adjust how the program will be called. These invocations can either be run directly or turned into shell or batch scripts.

Constructors

ProgramInvocation
Fields progInvokePath :: FilePath progInvokeArgs :: [String] progInvokeEnv :: [(String, Maybe String)] progInvokeCwd :: Maybe FilePath progInvokeInput :: Maybe String progInvokeInputEncoding :: IOEncoding progInvokeOutputEncoding :: IOEncoding

emptyProgramInvocation :: ProgramInvocation Source #

simpleProgramInvocation :: FilePath -> [String] -> ProgramInvocation Source #

programInvocation :: ConfiguredProgram -> [String] -> ProgramInvocation Source #

runProgramInvocation :: Verbosity -> ProgramInvocation -> IO () Source #

getProgramInvocationOutput :: Verbosity -> ProgramInvocation -> IO String Source #

The collection of unconfigured and configured programs

builtinPrograms :: [Program] Source #

The default list of programs. These programs are typically used internally to Cabal.

The collection of configured programs we can run

type ProgramConfiguration = ProgramDb Source #

emptyProgramConfiguration :: ProgramConfiguration Source #

defaultProgramConfiguration :: ProgramConfiguration Source #

restoreProgramConfiguration :: [Program] -> ProgramConfiguration -> ProgramConfiguration Source #

addKnownProgram :: Program -> ProgramDb -> ProgramDb Source #

Add a known program that we may configure later

addKnownPrograms :: [Program] -> ProgramDb -> ProgramDb Source #

lookupKnownProgram :: String -> ProgramDb -> Maybe Program Source #

knownPrograms :: ProgramDb -> [(Program, Maybe ConfiguredProgram)] Source #

getProgramSearchPath :: ProgramDb -> ProgramSearchPath Source #

Get the current ProgramSearchPath used by the ProgramDb. This is the default list of locations where programs are looked for when configuring them. This can be overridden for specific programs (with userSpecifyPath), and specific known programs can modify or ignore this search path in their own configuration code.

setProgramSearchPath :: ProgramSearchPath -> ProgramDb -> ProgramDb Source #

Change the current ProgramSearchPath used by the ProgramDb. This will affect programs that are configured from here on, so you should usually set it before configuring any programs.

userSpecifyPath Source #

Arguments

:: String	Program name
-> FilePath	user-specified path to the program
-> ProgramDb
-> ProgramDb

User-specify this path. Basically override any path information for this program in the configuration. If it's not a known program ignore it.

userSpecifyPaths :: [(String, FilePath)] -> ProgramDb -> ProgramDb Source #

Like userSpecifyPath but for a list of progs and their paths.

userMaybeSpecifyPath :: String -> Maybe FilePath -> ProgramDb -> ProgramDb Source #

userSpecifyArgs Source #

Arguments

:: String	Program name
-> [ProgArg]	user-specified args
-> ProgramDb
-> ProgramDb

User-specify the arguments for this program. Basically override any args information for this program in the configuration. If it's not a known program, ignore it..

userSpecifyArgss :: [(String, [ProgArg])] -> ProgramDb -> ProgramDb Source #

Like userSpecifyPath but for a list of progs and their args.

userSpecifiedArgs :: Program -> ProgramDb -> [ProgArg] Source #

Get any extra args that have been previously specified for a program.

lookupProgram :: Program -> ProgramDb -> Maybe ConfiguredProgram Source #

Try to find a configured program

lookupProgramVersion :: Verbosity -> Program -> VersionRange -> ProgramDb -> IO (Either String (ConfiguredProgram, Version, ProgramDb)) Source #

Check that a program is configured and available to be run.

Additionally check that the program version number is suitable and return it. For example you could require AnyVersion or orLaterVersion (Version [1,0] [])

It returns the configured program, its version number and a possibly updated ProgramDb. If the program could not be configured or the version is unsuitable, it returns an error value.

updateProgram :: ConfiguredProgram -> ProgramDb -> ProgramDb Source #

Update a configured program in the database.

configureProgram :: Verbosity -> Program -> ProgramDb -> IO ProgramDb Source #

Try to configure a specific program. If the program is already included in the collection of unconfigured programs then we use any user-supplied location and arguments. If the program gets configured successfully it gets added to the configured collection.

Note that it is not a failure if the program cannot be configured. It's only a failure if the user supplied a location and the program could not be found at that location.

The reason for it not being a failure at this stage is that we don't know up front all the programs we will need, so we try to configure them all. To verify that a program was actually successfully configured use requireProgram.

configureAllKnownPrograms :: Verbosity -> ProgramDb -> IO ProgramDb Source #

Try to configure all the known programs that have not yet been configured.

reconfigurePrograms :: Verbosity -> [(String, FilePath)] -> [(String, [ProgArg])] -> ProgramDb -> IO ProgramDb Source #

reconfigure a bunch of programs given new user-specified args. It takes the same inputs as userSpecifyPath and userSpecifyArgs and for all progs with a new path it calls configureProgram.

requireProgram :: Verbosity -> Program -> ProgramDb -> IO (ConfiguredProgram, ProgramDb) Source #

Check that a program is configured and available to be run.

It raises an exception if the program could not be configured, otherwise it returns the configured program.

requireProgramVersion :: Verbosity -> Program -> VersionRange -> ProgramDb -> IO (ConfiguredProgram, Version, ProgramDb) Source #

Like lookupProgramVersion, but raises an exception in case of error instead of returning 'Left errMsg'.

runDbProgram Source #

Arguments