HscTypes

Contents

compilation state
Information about modules
Information about the module being compiled
State relating to modules in this package
State relating to known packages
Annotations
Interactive context
Interfaces
Fixity
TyThings and type environments
MonadThings
Information on imports and exports
Warnings
Linker stuff
Program coverage
Breakpoints
Vectorisation information
Safe Haskell information
Compilation errors and warnings

Description

Types for the per-module compiler

Synopsis

compilation state

Hscenv is like Session, except that some of the fields are immutable. An HscEnv is used to compile a single module from plain Haskell source code (after preprocessing) to either C, assembly or C--. Things like the module graph don't change during a single compilation.

Historical note: "hsc" used to be the name of the compiler binary, when there was a separate driver and compiler. To compile a single module, the driver would invoke hsc on the source code... so nowadays we think of hsc as the layer of the compiler that deals with compiling a single module.

Constructors

HscEnv

Fields

hsc_dflags :: DynFlags

The dynamic flag settings

hsc_targets :: [Target]

The targets (or roots) of the current session

hsc_mod_graph :: ModuleGraph

The module graph of the current session

hsc_IC :: InteractiveContext

The context for evaluating interactive statements

hsc_HPT :: HomePackageTable

The home package table describes already-compiled home-package modules, excluding the module we are compiling right now. (In one-shot mode the current module is the only home-package module, so hsc_HPT is empty. All other modules count as "external-package" modules. However, even in GHCi mode, hi-boot interfaces are demand-loaded into the external-package table.)

hsc_HPT is not mutable because we only demand-load external packages; the home package is eagerly loaded, module by module, by the compilation manager.

The HPT may contain modules compiled earlier by --make but not actually below the current module in the dependency graph.

hsc_EPS :: !(IORef ExternalPackageState)

Information about the currently loaded external packages. This is mutable because packages will be demand-loaded during a compilation run as required.

hsc_NC :: !(IORef NameCache)

As with hsc_EPS, this is side-effected by compiling to reflect sucking in interface files. They cache the state of external interface files, in effect.

hsc_FC :: !(IORef FinderCache)

The cached result of performing finding in the file system

hsc_MLC :: !(IORef ModLocationCache)

This caches the location of modules, so we don't have to search the filesystem multiple times. See also hsc_FC.

hsc_OptFuel :: OptFuelState

Settings to control the use of "optimization fuel": by limiting the number of transformations, we can use binary search to help find compiler bugs.

hsc_type_env_var :: Maybe (Module, IORef TypeEnv)

Used for one-shot compilation only, to initialise the IfGblEnv. See TcRnTypes.tcg_type_env_var for TcRunTypes.TcGblEnv

hscEPS :: HscEnv -> IO ExternalPackageState Source

type FinderCache = ModuleNameEnv FindResult Source

The FinderCache maps home module names to the result of searching for that module. It records the results of searching for modules along the search path. On :load, we flush the entire contents of this cache.

Although the FinderCache range is FindResult for convenience , in fact it will only ever contain Found or NotFound entries.

data FindResult Source

The result of searching for an imported module.

Constructors

Found ModLocation Module	The module was found
NoPackage PackageId	The requested package was not found
FoundMultiple [PackageId]	_Error_: both in multiple packages
NotFound
Fields fr_paths :: [FilePath] fr_pkg :: Maybe PackageId fr_mods_hidden :: [PackageId] fr_pkgs_hidden :: [PackageId] fr_suggestions :: [Module]

type ModLocationCache = ModuleEnv ModLocation Source

Cache that remembers where we found a particular module. Contains both home modules and package modules. On :load, only home modules are purged from this cache.

data Target Source

A compilation target.

A target may be supplied with the actual text of the module. If so, use this instead of the file contents (this is for use in an IDE where the file hasn't been saved by the user yet).

Constructors

Target
Fields targetId :: TargetId module or filename targetAllowObjCode :: Bool object code allowed? targetContents :: Maybe (StringBuffer, ClockTime) in-memory text buffer?

Instances

Outputable Target

data TargetId Source

Constructors

TargetModule ModuleName	A module name: search for the file
TargetFile FilePath (Maybe Phase)	A filename: preprocess & parse it to find the module name. If specified, the Phase indicates how to compile this file (which phase to start from). Nothing indicates the starting phase should be determined from the suffix of the filename.

Instances

Eq TargetId
Outputable TargetId

pprTarget :: Target -> SDoc Source

pprTargetId :: TargetId -> SDoc Source

type ModuleGraph = [ModSummary]Source

A ModuleGraph contains all the nodes from the home package (only). There will be a node for each source module, plus a node for each hi-boot module.

The graph is not necessarily stored in topologically-sorted order. Use GHC.topSortModuleGraph and Digraph.flattenSCC to achieve this.

emptyMG :: ModuleGraph Source

Information about modules

data ModDetails Source

The ModDetails is essentially a cache for information in the ModIface for home modules only. Information relating to packages will be loaded into global environments in ExternalPackageState.

Constructors

ModDetails

Fields

md_exports :: [AvailInfo]
md_types :: !TypeEnv: Local type environment for this particular module
md_insts :: ![Instance]: DFunIds for the instances in this module
md_fam_insts :: ![FamInst]
md_rules :: ![CoreRule]: Domain may include Ids from other modules
md_anns :: ![Annotation]: Annotations present in this module: currently they only annotate things also declared in this module
md_vect_info :: !VectInfo: Module vectorisation information

emptyModDetails :: ModDetails Source

data ModGuts Source

A ModGuts is carried through the compiler, accumulating stuff as it goes There is only one ModGuts at any time, the one for the module being compiled right now. Once it is compiled, a ModIface and ModDetails are extracted and the ModGuts is discarded.

Constructors

ModGuts

Fields

mg_module :: !Module: Module being compiled
mg_boot :: IsBootInterface: Whether it's an hs-boot module
mg_exports :: ![AvailInfo]: What it exports
mg_deps :: !Dependencies: What it depends on, directly or otherwise
mg_dir_imps :: !ImportedMods: Directly-imported modules; used to generate initialisation code
mg_used_names :: !NameSet: What the module needed (used in MkIface.mkIface)
mg_used_th :: !Bool: Did we run a TH splice?
mg_rdr_env :: !GlobalRdrEnv: Top-level lexical environment
mg_fix_env :: !FixityEnv: Fixities declared in this module TODO: I'm unconvinced this is actually used anywhere
mg_types :: !TypeEnv: Types declared in this module
mg_insts :: ![Instance]: Class instances declared in this module
mg_fam_insts :: ![FamInst]: Family instances declared in this module
mg_rules :: ![CoreRule]: Before the core pipeline starts, contains See Note [Overall plumbing for rules] in Rules.lhs
mg_binds :: ![CoreBind]: Bindings for this module
mg_foreign :: !ForeignStubs: Foreign exports declared in this module
mg_warns :: !Warnings: Warnings declared in the module
mg_anns :: [Annotation]: Annotations declared in this module
mg_hpc_info :: !HpcInfo: Coverage tick boxes in the module
mg_modBreaks :: !ModBreaks: Breakpoints for the module
mg_vect_decls :: ![CoreVect]: Vectorisation declarations in this module (produced by desugarer & consumed by vectoriser)
mg_vect_info :: !VectInfo: Pool of vectorised declarations in the module
mg_inst_env :: InstEnv: Class instance environment from home-package modules (including this one); c.f. tcg_inst_env
mg_fam_inst_env :: FamInstEnv: Type-family instance enviroment for home-package modules (including this one); c.f. tcg_fam_inst_env
mg_trust_pkg :: Bool: Do we need to trust our own package for Safe Haskell? See Note [RnNames . Trust Own Package]

data CgGuts Source

A restricted form of ModGuts for code generation purposes

Constructors

CgGuts

Fields

cg_module :: !Module: Module being compiled
cg_tycons :: [TyCon]: Algebraic data types (including ones that started life as classes); generate constructors and info tables. Includes newtypes, just for the benefit of External Core
cg_binds :: [CoreBind]: The tidied main bindings, including previously-implicit bindings for record and class selectors, and data construtor wrappers. But *not* data constructor workers; reason: we we regard them as part of the code-gen of tycons
cg_foreign :: !ForeignStubs: Foreign export stubs
cg_dep_pkgs :: ![PackageId]: Dependent packages, used to generate #includes for C code gen
cg_hpc_info :: !HpcInfo: Program coverage tick box information
cg_modBreaks :: !ModBreaks: Module breakpoints

data ForeignStubs Source

Foreign export stubs

Constructors

NoStubs

We don't have any stubs

ForeignStubs SDoc SDoc

There are some stubs. Parameters:

1) Header file prototypes for foreign exported functions

2) C stubs to use when calling foreign exported functions

appendStubC :: ForeignStubs -> SDoc -> ForeignStubs Source

type ImportedMods = ModuleEnv [ImportedModsVal]Source

Records the modules directly imported by a module for extracting e.g. usage information

type ImportedModsVal = (ModuleName, Bool, SrcSpan, IsSafeImport)Source

data ModSummary Source

A single node in a 'ModuleGraph. The nodes of the module graph are one of:

A regular Haskell source module
A hi-boot source module
An external-core source module

Constructors

ModSummary

Fields

ms_mod :: Module: Identity of the module
ms_hsc_src :: HscSource: The module source either plain Haskell, hs-boot or external core
ms_location :: ModLocation: Location of the various files belonging to the module
ms_hs_date :: ClockTime: Timestamp of source file
ms_obj_date :: Maybe ClockTime: Timestamp of object, if we have one
ms_srcimps :: [Located (ImportDecl RdrName)]: Source imports of the module
ms_textual_imps :: [Located (ImportDecl RdrName)]: Non-source imports of the module from the module *text*
ms_hspp_file :: FilePath: Filename of preprocessed source file
ms_hspp_opts :: DynFlags: Cached flags from OPTIONS, INCLUDE and LANGUAGE pragmas in the modules source code
ms_hspp_buf :: Maybe StringBuffer: The actual preprocessed source, if we have it

Instances

Outputable ModSummary

ms_imps :: ModSummary -> [Located (ImportDecl RdrName)]Source

ms_mod_name :: ModSummary -> ModuleName Source

showModMsg :: HscTarget -> Bool -> ModSummary -> String Source

isBootSummary :: ModSummary -> Bool Source

Did this ModSummary originate from a hs-boot file?

msHsFilePath, msObjFilePath, msHiFilePath :: ModSummary -> FilePath Source

data SourceModified Source

Indicates whether a given module's source has been modified since it was last compiled.

Constructors

SourceModified	the source has been modified
SourceUnmodified	the source has not been modified. Compilation may or may not be necessary, depending on whether any dependencies have changed since we last compiled.
SourceUnmodifiedAndStable	the source has not been modified, and furthermore all of its (transitive) dependencies are up to date; it definitely does not need to be recompiled. This is important for two reasons: (a) we can omit the version check in checkOldIface, and (b) if the module used TH splices we don't need to force recompilation.

Information about the module being compiled

data HscSource Source

Constructors

HsSrcFile
HsBootFile
ExtCoreFile

Instances

Eq HscSource
Ord HscSource
Show HscSource

isHsBoot :: HscSource -> Bool Source

hscSourceString :: HscSource -> String Source

State relating to modules in this package

type HomePackageTable = ModuleNameEnv HomeModInfo Source

Helps us find information about modules in the home package

data HomeModInfo Source

Information about modules in the package being compiled

Constructors

HomeModInfo

Fields

hm_iface :: !ModIface

The basic loaded interface file: every loaded module has one of these, even if it is imported from another package

hm_details :: !ModDetails

Extra information that has been created from the ModIface for the module, typically during typechecking

hm_linkable :: !(Maybe Linkable)

The actual artifact we would like to link to access things in this module.

hm_linkable might be Nothing:

If this is an .hs-boot module
Temporarily during compilation if we pruned away the old linkable because it was out of date.

After a complete compilation (GHC.load), all hm_linkable fields in the HomePackageTable will be Just.

When re-linking a module (HscMain.HscNoRecomp), we construct the HomeModInfo by building a new ModDetails from the old ModIface (only).

emptyHomePackageTable :: HomePackageTable Source

hptInstances :: HscEnv -> (ModuleName -> Bool) -> ([Instance], [FamInst])Source

Find all the instance declarations (of classes and families) that are in modules imported by this one, directly or indirectly, and are in the Home Package Table. This ensures that we don't see instances from modules --make compiled before this one, but which are not below this one.

hptRules :: HscEnv -> [(ModuleName, IsBootInterface)] -> [CoreRule]Source

Get rules from modules "below" this one (in the dependency sense)

hptVectInfo :: HscEnv -> VectInfo Source

Get the combined VectInfo of all modules in the home package table. In contrast to instances and rules, we don't care whether the modules are "below" us in the dependency sense. The VectInfo of those modules not "below" us does not affect the compilation of the current module.

hptObjs :: HomePackageTable -> [FilePath]Source

State relating to known packages

data ExternalPackageState Source

Information about other packages that we have slurped in by reading their interface files

Constructors

EPS

Fields

eps_is_boot :: !(ModuleNameEnv (ModuleName, IsBootInterface))

In OneShot mode (only), home-package modules accumulate in the external package state, and are sucked in lazily. For these home-pkg modules (only) we need to record which are boot modules. We set this field after loading all the explicitly-imported interfaces, but before doing anything else

The ModuleName part is not necessary, but it's useful for debug prints, and it's convenient because this field comes direct from TcRnTypes.imp_dep_mods

eps_PIT :: !PackageIfaceTable

The ModIfaces for modules in external packages whose interfaces we have opened. The declarations in these interface files are held in the eps_decls, eps_inst_env, eps_fam_inst_env and eps_rules fields of this record, not in the mi_decls fields of the interface we have sucked in.

What is in the PIT is:

The Module
Fingerprint info
Its exports
Fixities
Deprecations and warnings

eps_PTE :: !PackageTypeEnv

Result of typechecking all the external package interface files we have sucked in. The domain of the mapping is external-package modules

eps_inst_env :: !PackageInstEnv

The total InstEnv accumulated from all the external-package modules

eps_fam_inst_env :: !PackageFamInstEnv

The total FamInstEnv accumulated from all the external-package modules

eps_rule_base :: !PackageRuleBase

The total RuleEnv accumulated from all the external-package modules

eps_vect_info :: !PackageVectInfo

The total VectInfo accumulated from all the external-package modules

eps_ann_env :: !PackageAnnEnv

The total AnnEnv accumulated from all the external-package modules

eps_mod_fam_inst_env :: !(ModuleEnv FamInstEnv)

The family instances accumulated from external packages, keyed off the module that declared them

eps_stats :: !EpsStats

Stastics about what was loaded from external packages

data EpsStats Source

Accumulated statistics about what we are putting into the ExternalPackageState. "In" means stuff that is just read from interface files, "Out" means actually sucked in and type-checked

Constructors

EpsStats
Fields n_ifaces_in :: !Int n_decls_in :: !Int n_decls_out :: !Int n_rules_in :: !Int n_rules_out :: !Int n_insts_in :: !Int n_insts_out :: !Int

addEpsInStats :: EpsStats -> Int -> Int -> Int -> EpsStats Source

Add stats for one newly-read interface

type PackageTypeEnv = TypeEnv Source

type PackageIfaceTable = ModuleEnv ModIface Source

Helps us find information about modules in the imported packages

emptyPackageIfaceTable :: PackageIfaceTable Source

lookupIfaceByModule :: DynFlags -> HomePackageTable -> PackageIfaceTable -> Module -> Maybe ModIface Source

Find the ModIface for a Module, searching in both the loaded home and external package module information

emptyModIface :: Module -> ModIface Source

type PackageInstEnv = InstEnv Source

type PackageRuleBase = RuleBase Source

Annotations

prepareAnnotations :: HscEnv -> Maybe ModGuts -> IO AnnEnv Source

Deal with gathering annotations in from all possible places and combining them into a single AnnEnv

Interactive context

data InteractiveContext Source

Interactive context, recording information about the state of the context in which statements are executed in a GHC session.

Constructors

InteractiveContext

Fields

ic_toplev_scope :: [Module]: The context includes the top-level scope of these modules
ic_imports :: [ImportDecl RdrName]: The context is extended with these import declarations
ic_rn_gbl_env :: GlobalRdrEnv: The contexts' cached GlobalRdrEnv, built by InteractiveEval.setContext
ic_tmp_ids :: [Id]: Names bound during interaction with the user. Later Ids shadow earlier ones with the same OccName Expressions are typed with these Ids in the envt For runtime-debugging, these Ids may have free TcTyVars of RuntimUnkSkol flavour, but no free TyVars (because the typechecker doesn't expect that)
ic_resume :: [Resume]: The stack of breakpoint contexts
ic_cwd :: Maybe FilePath

emptyInteractiveContext :: InteractiveContext Source

icPrintUnqual :: DynFlags -> InteractiveContext -> PrintUnqualified Source

extendInteractiveContext :: InteractiveContext -> [Id] -> InteractiveContext Source

substInteractiveContext :: InteractiveContext -> TvSubst -> InteractiveContext Source

mkPrintUnqualified :: DynFlags -> GlobalRdrEnv -> PrintUnqualified Source

Creates some functions that work out the best ways to format names for the user according to a set of heuristics

pprModulePrefix :: PprStyle -> Module -> OccName -> SDoc Source

Interfaces

data ModIface Source

A ModIface plus a ModDetails summarises everything we know about a compiled module. The ModIface is the stuff *before* linking, and can be written out to an interface file. The 'ModDetails is after linking and can be completely recovered from just the ModIface.

When we read an interface file, we also construct a ModIface from it, except that we explicitly make the mi_decls and a few other fields empty; as when reading we consolidate the declarations etc. into a number of indexed maps and environments in the ExternalPackageState.

Constructors

ModIface

Fields

mi_module :: !Module

Name of the module we are for

mi_iface_hash :: !Fingerprint

Hash of the whole interface

mi_mod_hash :: !Fingerprint

Hash of the ABI only

mi_orphan :: !WhetherHasOrphans

Whether this module has orphans

mi_finsts :: !WhetherHasFamInst

Whether this module has family instances

mi_boot :: !IsBootInterface

Read from an hi-boot file?

mi_deps :: Dependencies

The dependencies of the module. This is consulted for directly-imported modules, but not for anything else (hence lazy)

mi_usages :: [Usage]

Usages; kept sorted so that it's easy to decide whether to write a new iface file (changing usages doesn't affect the hash of this module)

mi_exports :: ![IfaceExport]

Records the modules that are the declaration points for things exported by this module, and the OccNames of those things

mi_exp_hash :: !Fingerprint

Hash of export list

mi_used_th :: !Bool

Module required TH splices when it was compiled. This disables recompilation avoidance (see #481).

mi_fixities :: [(OccName, Fixity)]

Fixities

mi_warns :: Warnings

Warnings

mi_anns :: [IfaceAnnotation]

Annotations

mi_decls :: [(Fingerprint, IfaceDecl)]

Sorted type, variable, class etc. declarations

mi_globals :: !(Maybe GlobalRdrEnv)

Binds all the things defined at the top level in the original source code for this module. which is NOT the same as mi_exports, nor mi_decls (which may contains declarations for things not actually defined by the user). Used for GHCi and for inspecting the contents of modules via the GHC API only.

(We need the source file to figure out the top-level environment, if we didn't compile this module from source then this field contains Nothing).

Strictly speaking this field should live in the HomeModInfo, but that leads to more plumbing.

mi_insts :: [IfaceInst]

Sorted class instance

mi_fam_insts :: [IfaceFamInst]

Sorted family instances

mi_rules :: [IfaceRule]

Sorted rules

mi_orphan_hash :: !Fingerprint

Hash for orphan rules and class and family instances combined

mi_vect_info :: !IfaceVectInfo

Vectorisation information

mi_warn_fn :: Name -> Maybe WarningTxt

Cached lookup for mi_warns

mi_fix_fn :: OccName -> Fixity

Cached lookup for mi_fixities

mi_hash_fn :: OccName -> Maybe (OccName, Fingerprint)

Cached lookup for mi_decls. The Nothing in mi_hash_fn means that the thing isn't in decls. It's useful to know that when seeing if we are up to date wrt. the old interface. The OccName is the parent of the name, if it has one.

mi_hpc :: !AnyHpcUsage

True if this program uses Hpc at any point in the program.

mi_trust :: !IfaceTrustInfo

Safe Haskell Trust information for this module.

mi_trust_pkg :: !Bool

Do we require the package this module resides in be trusted to trust this module? This is used for the situation where a module is Safe (so doesn't require the package be trusted itself) but imports some trustworthy modules from its own package (which does require its own package be trusted). See Note [RnNames . Trust Own Package]

Instances

Binary ModIface

mkIfaceWarnCache :: Warnings -> Name -> Maybe WarningTxt Source

Constructs the cache for the mi_warn_fn field of a ModIface

mkIfaceHashCache :: [(Fingerprint, IfaceDecl)] -> OccName -> Maybe (OccName, Fingerprint)Source

Constructs cache for the mi_hash_fn field of a ModIface

mkIfaceFixCache :: [(OccName, Fixity)] -> OccName -> Fixity Source

Creates cached lookup for the mi_fix_fn field of ModIface

emptyIfaceWarnCache :: Name -> Maybe WarningTxt Source

Fixity

type FixityEnv = NameEnv FixItem Source

Fixity environment mapping names to their fixities

data FixItem Source

Fixity information for an Name. We keep the OccName in the range so that we can generate an interface from it

Constructors

FixItem OccName Fixity

Instances

Outputable FixItem

lookupFixity :: FixityEnv -> Name -> Fixity Source

emptyFixityEnv :: FixityEnv Source

TyThings and type environments

data TyThing Source

A typecheckable-thing, essentially anything that has a name

Constructors

AnId Id
ADataCon DataCon
ATyCon TyCon
ACoAxiom CoAxiom
AClass Class

Instances

Outputable TyThing
NamedThing TyThing

tyThingClass :: TyThing -> Class Source

Get the Class from a TyThing if it is a class thing. Panics otherwise

tyThingTyCon :: TyThing -> TyCon Source

Get the TyCon from a TyThing if it is a type constructor thing. Panics otherwise

tyThingDataCon :: TyThing -> DataCon Source

Get the DataCon from a TyThing if it is a data constructor thing. Panics otherwise

tyThingId :: TyThing -> Id Source

Get the Id from a TyThing if it is a id *or* data constructor thing. Panics otherwise

tyThingCoAxiom :: TyThing -> CoAxiom Source

Get the CoAxiom from a TyThing if it is a coercion axiom thing. Panics otherwise

implicitTyThings :: TyThing -> [TyThing]Source

Determine the TyThings brought into scope by another TyThing other than itself. For example, Id's don't have any implicit TyThings as they just bring themselves into scope, but classes bring their dictionary datatype, type constructor and some selector functions into scope, just for a start!

implicitTyConThings :: TyCon -> [TyThing]Source

implicitClassThings :: Class -> [TyThing]Source

isImplicitTyThing :: TyThing -> Bool Source

Returns True if there should be no interface-file declaration for this thing on its own: either it is built-in, or it is part of some other declaration, or it is generated implicitly by some other declaration.

type TypeEnv = NameEnv TyThing Source

A map from Names to TyThings, constructed by typechecking local declarations or interface files

lookupType :: DynFlags -> HomePackageTable -> PackageTypeEnv -> Name -> Maybe TyThing Source

Find the TyThing for the given Name by using all the resources at our disposal: the compiled modules in the HomePackageTable and the compiled modules in other packages that live in PackageTypeEnv. Note that this does NOT look up the TyThing in the module being compiled: you have to do that yourself, if desired

lookupTypeHscEnv :: HscEnv -> Name -> IO (Maybe TyThing)Source

As lookupType, but with a marginally easier-to-use interface if you have a HscEnv

mkTypeEnv :: [TyThing] -> TypeEnv Source

emptyTypeEnv :: TypeEnv Source

extendTypeEnv :: TypeEnv -> TyThing -> TypeEnv Source

extendTypeEnvList :: TypeEnv -> [TyThing] -> TypeEnv Source

extendTypeEnvWithIds :: TypeEnv -> [Id] -> TypeEnv Source

lookupTypeEnv :: TypeEnv -> Name -> Maybe TyThing Source

typeEnvElts :: TypeEnv -> [TyThing]Source

typeEnvClasses :: TypeEnv -> [Class]Source

typeEnvTyCons :: TypeEnv -> [TyCon]Source

typeEnvIds :: TypeEnv -> [Id]Source

typeEnvDataCons :: TypeEnv -> [DataCon]Source

typeEnvCoAxioms :: TypeEnv -> [CoAxiom]Source

MonadThings

class Monad m => MonadThings m whereSource

Class that abstracts out the common ability of the monads in GHC to lookup a TyThing in the monadic environment by Name. Provides a number of related convenience functions for accessing particular kinds of TyThing

Methods

lookupThing :: Name -> m TyThing Source

lookupId :: Name -> m Id Source

lookupDataCon :: Name -> m DataCon Source

lookupTyCon :: Name -> m TyCon Source

lookupClass :: Name -> m Class Source

Instances

MonadThings CoreM
MonadThings (IOEnv (Env TcGblEnv TcLclEnv))
MonadThings (IOEnv (Env DsGblEnv DsLclEnv))

Information on imports and exports

type WhetherHasOrphans = Bool Source

Records whether a module has orphans. An "orphan" is one of:

An instance declaration in a module other than the definition module for one of the type constructors or classes in the instance head
A transformation rule in a module other than the one defining the function in the head of the rule

type IsBootInterface = Bool Source

Did this module originate from a *-boot file?

data Usage Source

Records modules that we depend on by making a direct import from

Constructors

UsagePackageModule	Module from another package
Fields usg_mod :: Module External package module depended on usg_mod_hash :: Fingerprint Cached module fingerprint usg_safe :: IsSafeImport Was this module imported as a safe import
UsageHomeModule	Module from the current package
Fields usg_mod_name :: ModuleName Name of the module usg_mod_hash :: Fingerprint Cached module fingerprint usg_entities :: [(OccName, Fingerprint)] Entities we depend on, sorted by occurrence name and fingerprinted. NB: usages are for parent names only, e.g. type constructors but not the associated data constructors. usg_exports :: Maybe Fingerprint Fingerprint for the export list we used to depend on this module, if we depend on the export list usg_safe :: IsSafeImport Was this module imported as a safe import

Instances

Eq Usage
Binary Usage

data Dependencies Source

Dependency information about modules and packages below this one in the import hierarchy.

Invariant: the dependencies of a module M never includes M.

Invariant: none of the lists contain duplicates.

Constructors

Deps

Fields

dep_mods :: [(ModuleName, IsBootInterface)]: Home-package module dependencies
dep_pkgs :: [(PackageId, Bool)]: External package dependencies. The bool indicates if the package is required to be trusted when the module is imported as a safe import (Safe Haskell). See Note [RnNames . Tracking Trust Transitively]
dep_orphs :: [Module]: Orphan modules (whether home or external pkg), *not* including family instance orphans as they are anyway included in dep_finsts
dep_finsts :: [Module]: Modules that contain family instances (whether the instances are from the home or an external package)

Instances

Eq Dependencies
Binary Dependencies

noDependencies :: Dependencies Source

data NameCache Source

The NameCache makes sure that there is just one Unique assigned for each original name; i.e. (module-name, occ-name) pair and provides something of a lookup mechanism for those names.

Constructors

NameCache
Fields nsUniqs :: UniqSupply Supply of uniques nsNames :: OrigNameCache Ensures that one original name gets one unique nsIPs :: OrigIParamCache Ensures that one implicit parameter name gets one unique

type OrigNameCache = ModuleEnv (OccEnv Name)Source

Per-module cache of original OccNames given Names

type OrigIParamCache = Map (IPName OccName) (IPName Name)Source

Module-local cache of implicit parameter OccNames given Names

type Avails = [AvailInfo]Source

A collection of AvailInfo - several things that are "available"

availsToNameSet :: [AvailInfo] -> NameSet Source

availsToNameEnv :: [AvailInfo] -> NameEnv AvailInfo Source

availName :: AvailInfo -> Name Source

Just the main name made available, i.e. not the available pieces of type or class brought into scope by the GenAvailInfo

availNames :: AvailInfo -> [Name]Source

All names made available by the availability information

data AvailInfo Source

Records what things are available, i.e. in scope

Constructors

Avail Name

An ordinary identifier in scope

AvailTC Name [Name]

A type or class in scope. Parameters:

1) The name of the type or class 2) The available pieces of type or class.

The AvailTC Invariant: * If the type or class is itself to be in scope, it must be *first* in this list. Thus, typically: AvailTC Eq [Eq, ==, /=]

Instances

Eq AvailInfo
Outputable AvailInfo
Binary AvailInfo

type IfaceExport = AvailInfo Source

The original names declared of a certain module that are exported

stableAvailCmp :: AvailInfo -> AvailInfo -> Ordering Source

Warnings

data Warnings Source

Warning information for a module

Constructors

NoWarnings	Nothing deprecated
WarnAll WarningTxt	Whole module deprecated
WarnSome [(OccName, WarningTxt)]	Some specific things deprecated

Instances

Eq Warnings
Outputable Warnings
Binary Warnings

data WarningTxt Source

Constructors

WarningTxt [FastString]
DeprecatedTxt [FastString]

Instances

Eq WarningTxt
Data WarningTxt
Typeable WarningTxt
Outputable WarningTxt
Binary WarningTxt

plusWarns :: Warnings -> Warnings -> Warnings Source

Linker stuff

data Linkable Source

Information we can use to dynamically link modules into the compiler

Constructors

LM

Fields

linkableTime :: ClockTime

Time at which this linkable was built (i.e. when the bytecodes were produced, or the mod date on the files)

linkableModule :: Module

The linkable module itself

linkableUnlinked :: [Unlinked]

Those files and chunks of code we have yet to link.

INVARIANT: A valid linkable always has at least one Unlinked item. If this list is empty, the Linkable represents a fake linkable, which is generated in HscNothing mode to avoid recompiling modules.

XXX: Do items get removed from this list when they get linked?

Instances

Outputable Linkable

isObjectLinkable :: Linkable -> Bool Source

linkableObjs :: Linkable -> [FilePath]Source

data Unlinked Source

Objects which have yet to be linked by the compiler

Constructors

DotO FilePath	An object file (.o)
DotA FilePath	Static archive file (.a)
DotDLL FilePath	Dynamically linked library file (.so, .dll, .dylib)
BCOs CompiledByteCode ModBreaks	A byte-code object, lives only in memory

Instances

Outputable Unlinked

data CompiledByteCode Source

Instances

Outputable CompiledByteCode

isObject :: Unlinked -> Bool Source

Is this an actual file on disk we can link in somehow?

nameOfObject :: Unlinked -> FilePath Source

Retrieve the filename of the linkable if possible. Panic if it is a byte-code object

isInterpretable :: Unlinked -> Bool Source

Is this a bytecode linkable with no file on disk?

byteCodeOfObject :: Unlinked -> CompiledByteCode Source

Retrieve the compiled byte-code if possible. Panic if it is a file-based linkable

Program coverage

data HpcInfo Source

Information about a modules use of Haskell Program Coverage

Constructors

HpcInfo
Fields hpcInfoTickCount :: Int hpcInfoHash :: Int
NoHpcInfo
Fields hpcUsed :: AnyHpcUsage Is hpc used anywhere on the module tree?

emptyHpcInfo :: AnyHpcUsage -> HpcInfo Source

isHpcUsed :: HpcInfo -> AnyHpcUsage Source

Find out if HPC is used by this module or any of the modules it depends upon

type AnyHpcUsage = Bool Source

This is used to signal if one of my imports used HPC instrumentation even if there is no module-local HPC usage

Breakpoints

data ModBreaks Source

All the information about the breakpoints for a given module

Constructors

ModBreaks

Fields

modBreaks_flags :: BreakArray: The array of flags, one per breakpoint, indicating which breakpoints are enabled.
modBreaks_locs :: !(Array BreakIndex SrcSpan): An array giving the source span of each breakpoint.
modBreaks_vars :: !(Array BreakIndex [OccName]): An array giving the names of the free variables at each breakpoint.
modBreaks_decls :: !(Array BreakIndex [String]): An array giving the names of the declarations enclosing each breakpoint.

type BreakIndex = Int Source

Breakpoint index

emptyModBreaks :: ModBreaks Source

Vectorisation information

data VectInfo Source

Vectorisation information for ModGuts, ModDetails and ExternalPackageState; see also documentation at Vectorise.Env.GlobalEnv.

Constructors

VectInfo

Fields

vectInfoVar :: VarEnv (Var, Var): (f, f_v) keyed on f
vectInfoTyCon :: NameEnv (TyCon, TyCon): (T, T_v) keyed on T
vectInfoDataCon :: NameEnv (DataCon, DataCon): (C, C_v) keyed on C
vectInfoPADFun :: NameEnv (TyCon, Var): (T_v, paT) keyed on T_v
vectInfoIso :: NameEnv (TyCon, Var): (T, isoT) keyed on T
vectInfoScalarVars :: VarSet: set of purely scalar variables
vectInfoScalarTyCons :: NameSet: set of scalar type constructors

data IfaceVectInfo Source

Vectorisation information for ModIface; i.e, the vectorisation information propagated across module boundaries.

Constructors

IfaceVectInfo

Fields

ifaceVectInfoVar :: [Name]: All variables in here have a vectorised variant
ifaceVectInfoTyCon :: [Name]: All TyCons in here have a vectorised variant; the name of the vectorised variant and those of its data constructors are determined by OccName.mkVectTyConOcc and OccName.mkVectDataConOcc; the names of the isomorphisms are determined by OccName.mkVectIsoOcc
ifaceVectInfoTyConReuse :: [Name]: The vectorised form of all the TyCons in here coincides with the unconverted form; the name of the isomorphisms is determined by OccName.mkVectIsoOcc
ifaceVectInfoScalarVars :: [Name]
ifaceVectInfoScalarTyCons :: [Name]

Instances

Binary IfaceVectInfo

noVectInfo :: VectInfo Source

plusVectInfo :: VectInfo -> VectInfo -> VectInfo Source

noIfaceVectInfo :: IfaceVectInfo Source

Safe Haskell information

data IfaceTrustInfo Source

Safe Haskell information for ModIface Simply a wrapper around SafeHaskellMode to sepperate iface and flags

Instances

Outputable IfaceTrustInfo
Binary IfaceTrustInfo

getSafeMode :: IfaceTrustInfo -> SafeHaskellMode Source

setSafeMode :: SafeHaskellMode -> IfaceTrustInfo Source

noIfaceTrustInfo :: IfaceTrustInfo Source

trustInfoToNum :: IfaceTrustInfo -> Word8 Source

numToTrustInfo :: Word8 -> IfaceTrustInfo Source

type IsSafeImport = Bool Source

Is an import a safe import?

Compilation errors and warnings

data SourceError Source

A source error is an error that is caused by one or more errors in the source code. A SourceError is thrown by many functions in the compilation pipeline. Inside GHC these errors are merely printed via log_action, but API clients may treat them differently, for example, insert them into a list box. If you want the default behaviour, use the idiom:

 handleSourceError printExceptionAndWarnings $ do
   ... api calls that may fail ...

The SourceErrors error messages can be accessed via srcErrorMessages. This list may be empty if the compiler failed due to -Werror (Opt_WarnIsError).

See printExceptionAndWarnings for more information on what to take care of when writing a custom error handler.

Instances

Show SourceError
Typeable SourceError
Exception SourceError

data GhcApiError Source

XXX: what exactly is an API error?

Instances

Show GhcApiError
Typeable GhcApiError
Exception GhcApiError

mkSrcErr :: ErrorMessages -> SourceError Source

srcErrorMessages :: SourceError -> ErrorMessages Source

mkApiErr :: SDoc -> GhcApiError Source

throwOneError :: MonadIO m => ErrMsg -> m abSource

handleSourceError Source

Arguments

:: ExceptionMonad m
=> (SourceError -> m a)	exception handler
-> m a	action to perform
-> m a

Perform the given action and call the exception handler if the action throws a SourceError. See SourceError for more information.

handleFlagWarnings :: DynFlags -> [Located String] -> IO ()Source

printOrThrowWarnings :: DynFlags -> Bag WarnMsg -> IO ()Source

Given a bag of warnings, turn them into an exception if -Werror is enabled, or print them out otherwise.